From: "VANatFortuna amarnath" <van.bluez.list@gmail.com>
To: "BlueZ development" <bluez-devel@lists.sourceforge.net>,
christian.mager@gmail.com
Subject: Re: [Bluez-devel] bluetooth-alsa and HAMA BTH-155
Date: Fri, 10 Nov 2006 19:35:27 +0530 [thread overview]
Message-ID: <d7dffb480611100605k76213ee2sf5da832c3ac31d6b@mail.gmail.com> (raw)
In-Reply-To: <454B3AD7.7080401@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 3565 bytes --]
hi Christian !
I am vey new to BlueZ and even bluetooth. I am trying to configure
bluetooth headset to 'skype' to make calls. and i downloaded both 'alsa
project' and 'btsco' and i followed as per the instruction. and even
bt-utils(3.7).
But while running
#btsco <my headset addr>
i am facing the same proble what u faced.
-------------------
Error: Failed to connect to SDP server: Permission denied
Assuming channel 2
Voice setting: 0x0060
Can't connect RFCOMM channel: Permission denied
--------------------------------
i am not able to solve this problem , can u help me how could you solve
this.
Thanx in adwance.
Amarnath
On 11/3/06, Christian Mager <christian.mager@gmail.com> wrote:
>
> Hello,
>
> I followed the instructions of bluetooth-alsa.sf.net to get my bt
> headset work but pairing doesn't work so far. snd_bt_sco is loaded and
> when I run btsco I get the following output:
>
> $ btsco -v 00:13:8A:04:A3:43
> btsco v0.42
> Device is 1:0
> Error: Failed to connect to SDP server: Permission denied
> Assuming channel 2
>
> Voice setting: 0x0060
> Can't connect RFCOMM channel: Permission denied
>
> Yes, I have restarted /etc/init.d/bluez-utils. I also started btsco as
> root but same result. Pairing the headset with my cell phone works, but
> it asks for a pin, btsco desn't. Could this cause the problem? In
> /etc/blueooth/hci.conf there is 'pin_helper /usr/bin/bluez-pin;' and 'lm
> accept;'.
>
> On your project site you wrote, that the following information could be
> useful for you:
>
> - Output of hciconfig -a:
>
> hci0: Type: USB
> BD Address: 00:0F:B3:98:88:2E ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:790 acl:0 sco:0 events:63 errors:0
> TX bytes:814 acl:0 sco:0 commands:43 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'chica-0'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x222 LMP Ver: 1.1 (0x1) LMP Subver:
> 0x222
> Manufacturer: Cambridge Silicon Radio (10)
>
> - Output from hciconfig hci0 revision:
>
> hci0: Type: USB
> BD Address: 00:0F:B3:98:88:2E ACL MTU: 192:8 SCO MTU: 64:8
> Build 546
> Chip version: BlueCore02-External
> Max key size: 128 bit
> SCO mapping: HCI
>
> - Output of hcitool info 00:13:8A:04:A3:43:
>
> Requesting information ...
> Can't create connection: Input/output error
>
> - Systeminformation: Debian Sarge, Kernel 2.6.17.11 (self compiled),
> bluez-utils 2.15-1.1
>
> If you need more info just let me know.
>
> Could it be possible that my headset itself doesn't work with
> bluetooth-alsa? I would be very happy if someone could help me. Any
> ideas how to solve this?
>
> Greets, Christian Mager.
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
[-- Attachment #1.2: Type: text/html, Size: 5156 bytes --]
[-- Attachment #2: Type: text/plain, Size: 373 bytes --]
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2006-11-10 14:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-03 12:49 [Bluez-devel] bluetooth-alsa and HAMA BTH-155 Christian Mager
2006-11-03 16:37 ` Reiner Klenk
2006-11-03 16:46 ` Christian Mager
2006-11-10 14:05 ` VANatFortuna amarnath [this message]
2006-11-10 14:08 ` Marcel Hilzinger
2006-11-10 16:16 ` Christian Mager
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7dffb480611100605k76213ee2sf5da832c3ac31d6b@mail.gmail.com \
--to=van.bluez.list@gmail.com \
--cc=bluez-devel@lists.sourceforge.net \
--cc=christian.mager@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox