From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: From: Claudio Takahasi To: bluez-devel@lists.sourceforge.net Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_Part_11480_16206422.1127235154148" Subject: [Bluez-devel] firmware upgrade Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 20 Sep 2005 13:52:34 -0300 ------=_Part_11480_16206422.1127235154148 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi folks, Before start update the firmware of my dongles I would like make sure that nothing is wrong. Sometimes, dongles upgrades can end up with a dead dongle :) I read some documents in the Marcel's home=20 page(http://holtmann.org) but I am afraid of upgrade my dongles :) I have the following dongles/adapters: >>>> D-Link DBT-120 Hardware B3 $hciconfig -a hci0 version hci0: Type: USB BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 HCI Ver: 1.1 (0x1) HCI Rev: 0x1bb LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb Manufacturer: Cambridge Silicon Radio (10) $hciconfig -a hci0 revision hci0: Type: USB BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 HCI 15.3 Chip version: BlueCore02-External Max key size: 56 bit SCO mapping: HCI >>>> D-Link DBT-122 Hardware A1 $hciconfig -a hci0 version hci0: Type: USB BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 377:10 SCO MTU: 16:0 HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309 Manufacturer: Broadcom Corporation (15) $hciconfig -a hci0 revision hci0: Type: USB BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 377:10 SCO MTU: 16:0 Firmware 0.3 / 9 >>>> IBM T41 $hciconfig -a hci0 version BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 HCI Ver: 1.1 (0x1) HCI Rev: 0x222 LMP Ver: 1.1 (0x1) LMP Subver: 0x222 Manufacturer: Cambridge Silicon Radio (10) $hciconfig -a hci0 revision hci0: Type: USB BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 Build 546 Chip version: BlueCore02-External Max key size: 128 bit SCO mapping: HCI I am not sure if upgrade will work in the DBT-122 and in my notebook IBM T41. If someone has tips or references of how do this procedure please send me the links. Thanks in advance, Claudio ------=_Part_11480_16206422.1127235154148 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi folks,

Before start update the firmware of my dongles I would like make sure
that nothing is wrong. Sometimes, dongles upgrades can end up with
a dead dongle :) I read some documents in the Marcel's home
page(http://holtmann.org) but I am afra= id of upgrade my dongles :)

I have the following dongles/adapters:

>>>> D-Link DBT-120 Hardware B3
$hciconfig -a hci0 version
hci0:   Type: USB
        BD Address: XX:XX:XX:XX:XX:XX AC= L MTU: 192:8 SCO MTU: 64:8
        HCI Ver: 1.1 (0x1) HCI Rev: 0x1b= b LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb
        Manufacturer: Cambridge Silicon = Radio (10)
$hciconfig -a hci0 revision
hci0:   Type: USB
        BD Address: XX:XX:XX:XX:XX:XX AC= L MTU: 192:8 SCO MTU: 64:8
        HCI 15.3
        Chip version: BlueCore02-Externa= l
        Max key size: 56 bit
        SCO mapping:  HCI

>>>> D-Link DBT-122 Hardware A1
$hciconfig -a hci0 version
hci0:   Type: USB
        BD Address: XX:XX:XX:XX:XX:XX AC= L MTU: 377:10 SCO MTU: 16:0
        HCI Ver: 1.2 (0x2) HCI Rev: 0x0 = LMP Ver: 1.2 (0x2) LMP Subver: 0x309
        Manufacturer: Broadcom Corporati= on (15)
$hciconfig -a hci0 revision
hci0:   Type: USB
        BD Address: XX:XX:XX:XX:XX:XX AC= L MTU: 377:10 SCO MTU: 16:0
        Firmware 0.3 / 9

>>>> IBM T41
$hciconfig -a hci0 version
        BD Address: XX:XX:XX:XX:XX:XX AC= L MTU: 192:8 SCO MTU: 64:8
        HCI Ver: 1.1 (0x1) HCI Rev: 0x22= 2 LMP Ver: 1.1 (0x1) LMP Subver: 0x222
        Manufacturer: Cambridge Silicon = Radio (10)
$hciconfig -a hci0 revision
hci0:   Type: USB
        BD Address: XX:XX:XX:XX:XX:XX AC= L MTU: 192:8 SCO MTU: 64:8
        Build 546
        Chip version: BlueCore02-Externa= l
        Max key size: 128 bit
        SCO mapping:  HCI



I am not sure if upgrade will work in the DBT-122 and in my notebook
IBM T41. If someone has tips or references of how do this procedure
please send me the links.


Thanks in advance,
Claudio

------=_Part_11480_16206422.1127235154148-- ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel