--- bluez-utils-cvs.orig/hcid/hcid.h 2005-08-25 15:32:41.000000000 -0300 +++ bluez-utils-cvs-hcid/hcid/hcid.h 2005-10-03 11:02:36.000000000 -0300 @@ -122,6 +122,9 @@ #ifdef ENABLE_DBUS gboolean hcid_dbus_init(void); +void hcid_dbus_exit(void); +gboolean mgr_dbus_reg_device_paths(uint16_t id); +gboolean mgr_dbus_unreg_device_paths(uint16_t id); void hcid_dbus_request_pin(int dev, struct hci_conn_info *ci); void hcid_dbus_inquiry_start(bdaddr_t *local); void hcid_dbus_inquiry_complete(bdaddr_t *local); --- bluez-utils-cvs.orig/hcid/dbus.h 1969-12-31 21:00:00.000000000 -0300 +++ bluez-utils-cvs-hcid/hcid/dbus.h 2005-10-03 10:49:28.000000000 -0300 @@ -0,0 +1,209 @@ +/* + * + * BlueZ - Bluetooth protocol stack for Linux + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky + * Copyright (C) 2002-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + * SOFTWARE IS DISCLAIMED. + * + * + * $Id: dbus.h,v 0.1 2005/09/16 08:00:00 holtmann Exp $ + */ + +#ifndef __H_BLUEZ_DBUS_H__ +#define __H_BLUEZ_DBUS_H__ + +#define __END_SIG__ DBUS_TYPE_INVALID_AS_STRING + +/* bluetoothd Bus name */ +#define BLUEZ_DBUS_NAME "org.bluez" +#define DFT_DEVICE_ID (0xFFFF) +#define HCI_DFT_DEVICE_NAME "default" +#define HCI_DEVICE_NAME "hci" + +#define BLUEZ_DBUS_DEVS_PATH "/org/bluez/Devices" +#define BLUEZ_DBUS_DEVS_INTERFACE BLUEZ_DBUS_NAME".Devices" + +#define BLUEZ_DBUS_MGR_PATH "/org/bluez/Manager" +#define BLUEZ_DBUS_MGR_INTERFACE BLUEZ_DBUS_NAME".Manager" + +/*======================================================================== + BlueZ D-Bus Device service definitions "/org/bluez/Device" + *========================================================================*/ +#define DEV_UP_REQ "Up" +#define DEV_DOWN_REQ "Down" +#define DEV_RESET_REQ "Reset" +#define DEV_SET_PROPERTY_REQ "SetProperty" +#define DEV_GET_PROPERTY_REQ "GetProperty" + +#define DEV_UP_REQ_SIGNATURE __END_SIG__ +#define DEV_DOWN_REQ_SIGNATURE __END_SIG__ +#define DEV_RESET_REQ_SIGNATURE __END_SIG__ +#define DEV_SET_PROPERTY_REQ_SIGNATURE __END_SIG__ +#define DEV_GET_PROPERTY_REQ_SIGNATURE __END_SIG__ + + +//TODO add the other hciconfig features + +/*======================================================================== + BlueZ D-Bus Manager service definitions "/org/bluez/Manager" + *========================================================================*/ + + /* ===== Manager definitions, services under BLUEZ_DBUS_DEVS_PATH ===== */ +#define MGR_GET_DEV_REQ "DeviceList" +#define MGR_INIT_REQ "Init" + +/* Enable/Disable services controller, pan, serial, ... */ +#define MGR_ENABLE_REQ "Enable" +#define MGR_DISABLE_REQ "Disable" + +//signatures +#define MGR_GET_DEV_REQ_SIGNATURE __END_SIG__ + +/* yya(ss)*/ +#define MGR_GET_DEV_REPLY_SIGNATURE DBUS_TYPE_BYTE_AS_STRING\ + DBUS_TYPE_BYTE_AS_STRING\ + DBUS_TYPE_ARRAY_AS_STRING\ + HCI_DEVICE_STRUCT_SIGNATURE\ + __END_SIG__ + +/* ===== HCI definitions ===== */ +#define BLUEZ_DBUS_HCI "Controller" +#define BLUEZ_DBUS_HCI_PATH BLUEZ_DBUS_MGR_PATH"/"BLUEZ_DBUS_HCI +#define BLUEZ_DBUS_HCI_INTERFACE BLUEZ_DBUS_MGR_INTERFACE"."BLUEZ_DBUS_HCI + +//HCI signals +#define BLUEZ_DBUS_HCI_SIG_INQ_START "InquiryStartSig" +#define BLUEZ_DBUS_HCI_SIG_INQ_COMPLETE "InquiryCompleteSig" +#define BLUEZ_DBUS_HCI_SIG_INQ_RESULT "InquiryResultSig" +#define BLUEZ_DBUS_HCI_SIG_REMOTE_NAME "RemoteNameSig" + +//HCI Provided services +#define HCI_PERIODIC_INQ_REQ "PeriodicInquiry" +#define HCI_CANCEL_PERIODIC_INQ_REQ "CancelPeriodic" +#define HCI_INQ_REQ "Inquiry" +#define HCI_ROLE_SWITCH_REQ "RoleSwitch" + + +#define HCI_PERIODIC_INQ_REQ_SIGNATURE DBUS_TYPE_BYTE_AS_STRING\ + DBUS_TYPE_BYTE_AS_STRING\ + DBUS_TYPE_BYTE_AS_STRING\ + __END_SIG__ + +#define HCI_CANCEL_PERIODIC_INQ_REQ_SIGNATURE __END_SIG__ + +#define HCI_INQ_REQ_SIGNATURE DBUS_TYPE_BYTE_AS_STRING\ + DBUS_TYPE_BYTE_AS_STRING\ + DBUS_TYPE_UINT16_AS_STRING\ + __END_SIG__ + +#define HCI_ROLE_SWITCH_REQ_SIGNATURE DBUS_TYPE_STRING_AS_STRING\ + DBUS_TYPE_BYTE_AS_STRING\ + __END_SIG__ + +#define HCI_DEVICE_STRUCT_SIGNATURE DBUS_STRUCT_BEGIN_CHAR_AS_STRING\ + DBUS_TYPE_STRING_AS_STRING\ + DBUS_TYPE_STRING_AS_STRING\ + DBUS_STRUCT_END_CHAR_AS_STRING + +#define HCI_INQ_REPLY_SIGNATURE DBUS_STRUCT_BEGIN_CHAR_AS_STRING\ + DBUS_TYPE_STRING_AS_STRING\ + DBUS_TYPE_UINT32_AS_STRING\ + DBUS_TYPE_UINT16_AS_STRING\ + DBUS_STRUCT_END_CHAR_AS_STRING\ + __END_SIG__ + + +/* ===== SDP definitions ===== */ +#define BLUEZ_DBUS_SDP "Service" +//Default path for Service +#define BLUEZ_DBUS_SDP_PATH BLUEZ_DBUS_MGR_PATH"/"HCI_DFT_DEVICE_NAME"/"BLUEZ_DBUS_SDP +//SDP signals +//SDP Provided services +//SDP signatures + + +/* ===== RFCOMM definitions ===== */ +#define BLUEZ_DBUS_SERIAL "Serial" +//Default path for Serial +#define BLUEZ_DBUS_SERIAL_PATH BLUEZ_DBUS_MGR_PATH"/"HCI_DFT_DEVICE_NAME"/"BLUEZ_DBUS_SERIAL +//RFCOMM signals +//RFCOMM Provided services +//RFCOMM signatures + + +/* ===== PAN definitions ===== */ +#define BLUEZ_DBUS_NET "Network" +//Default path for Network +#define BLUEZ_DBUS_NET_PATH BLUEZ_DBUS_MGR_PATH"/"HCI_DFT_DEVICE_NAME"/"BLUEZ_DBUS_NET +//PAN signals +//PAN Provided services +//PAN signatures + +/* ===== HID definitions ===== */ +#define BLUEZ_DBUS_HID "HID" +//Default path for HID +#define BLUEZ_DBUS_HID_PATH BLUEZ_DBUS_MGR_PATH"/"HCI_DFT_DEVICE_NAME"/"BLUEZ_DBUS_HID + +//HID signals +//HID Provided services +//HID signatures + + +/* ===== Common Error messages of org.bluez. =====*/ +#define BLUEZ_DBUS_ERR_FAILED BLUEZ_DBUS_NAME".EFailed" +//TODO What are the other error types? + + +/* BLUEZ_DBUS_ERR_FAILED + * EFailed error messages signature is : sni + * Where the first argument is a string(error message description), + * the second is a uint16 that contains the error class(system, dbus or hci). + * The last argument is a int32 that contains the error code(errno + * for system errors, a dbus error code defined below or a hci error). + * For hci error see the bluetooth specification. + */ + +/* Error code offsets */ +#define BLUEZ_EBT_OFFSET (0x00000000) /* see Bluetooth error code */ +#define BLUEZ_EBT_EXT_OFFSET (0x00000100) +#define BLUEZ_EDBUS_OFFSET (0x00010000) +#define BLUEZ_ESYSTEM_OFFSET (0x00020000) +#define BLUEZ_EFUTURE_OFFSET (0x00040000) + + +/* D-Bus error code, class BLUEZ_EDBUS_OFFSET */ +#define BLUEZ_EDBUS_UNKNOWN_METHOD (0x01 + BLUEZ_EDBUS_OFFSET) +#define BLUEZ_EDBUS_WRONG_SIGNATURE (0x02 + BLUEZ_EDBUS_OFFSET) +#define BLUEZ_EDBUS_WRONG_PARAM (0x03 + BLUEZ_EDBUS_OFFSET) +#define BLUEZ_EDBUS_RECORD_NOT_FOUND (0x04 + BLUEZ_EDBUS_OFFSET) +#define BLUEZ_EDBUS_NO_MEM (0x05 + BLUEZ_EDBUS_OFFSET) +#define BLUEZ_EDBUS_CONN_NOT_FOUND (0x06 + BLUEZ_EDBUS_OFFSET) + +/* D-Bus error code, class BLUEZ_ESYSTEM_OFFSET */ +#define BLUEZ_ESYSTEM_ENODEV (ENODEV + BLUEZ_ESYSTEM_OFFSET) + + +/* BLUEZ_DBUS_ERR_NO_MEMORY */ +#define BLUEZ_DBUS_ERR_NO_MEMORY_STR "No memory" + + +#endif /*__H_BLUEZ_DBUS_H__*/ --- bluez-utils-cvs.orig/hcid/dbus.c 2005-09-22 09:09:16.000000000 -0300 +++ bluez-utils-cvs-hcid/hcid/dbus.c 2005-10-03 10:48:19.000000000 -0300 @@ -33,9 +33,14 @@ #endif #include +#include +#include +#include +#include #include #include + #include #include #include @@ -45,22 +50,229 @@ #include "glib-ectomy.h" #include "hcid.h" +#include "dbus.h" static DBusConnection *connection; +static int8_t num_adapters = 0; #define TIMEOUT (30 * 1000) /* 30 seconds */ +#define BLUETOOTH_DEVICE_NAME_LEN (18) +#define BLUETOOTH_DEVICE_ADDR_LEN (18) +#define MAX_PATH_LENGTH (64) #define SERVICE_NAME "org.bluez.PinAgent" #define INTERFACE_NAME SERVICE_NAME #define REQUEST_NAME "PinRequest" #define PATH_NAME "/org/bluez/PinAgent" -#define WRONG_ARGS_ERROR "org.bluez.Error.WrongArgs" struct pin_request { int dev; bdaddr_t bda; }; +/* + * next action: move to a common header + */ + + +typedef DBusMessage* (service_handler_func_t)(DBusMessage *, void *); + +typedef struct +{ + const char *name; + service_handler_func_t *handler_func; + const char *signature; +}service_table_t; + +typedef int8_t register_function_t(DBusConnection *conn, uint8_t dft_reg, uint16_t id); +typedef int8_t unregister_function_t(DBusConnection *conn, uint8_t unreg_dft, uint16_t id); + +const service_table_t *get_hci_table(void); +int8_t hci_dbus_reg_obj_path(DBusConnection *conn, uint8_t dft_reg, uint16_t id); +int8_t hci_dbus_unreg_obj_path(DBusConnection *conn, uint8_t unreg_dft, uint16_t id); + + +typedef const service_table_t* get_svc_table_func_t(void); +typedef struct { + const char *name; + uint8_t status; /* 1:active 0:disabled */ + uint8_t dft_reg; /* dft path registered */ + register_function_t *reg_func; + unregister_function_t *unreg_func; + get_svc_table_func_t *get_svc_table; /* return the service table */ +}__attribute__((packed))profile_obj_path_data_t; + +/* + * next action: Move to /common directory + */ + +static int find_conn(int s, int dev_id, long arg) +{ + struct hci_conn_list_req *cl; + struct hci_conn_info *ci; + int i; + + if (!(cl = malloc(10 * sizeof(*ci) + sizeof(*cl)))) { + syslog(LOG_ERR, "Can't allocate memory"); + return 0; + } + cl->dev_id = dev_id; + cl->conn_num = 10; + ci = cl->conn_info; + + if (ioctl(s, HCIGETCONNLIST, (void *) cl)) { + syslog(LOG_ERR, "Can't get connection list"); + return 0; + } + + for (i = 0; i < cl->conn_num; i++, ci++) + if (!bacmp((bdaddr_t *) arg, &ci->bdaddr)) + return 1; + + return 0; +} + + +/* + * D-Bus error messages functions and declarations. + * This section should be moved to a common file + * in the future + * + */ +typedef struct { + uint32_t code; + const char *str; +}bluez_error_t; + +static const bluez_error_t error_array[] = { + { BLUEZ_EDBUS_UNKNOWN_METHOD, "Method not found"}, + { BLUEZ_EDBUS_WRONG_SIGNATURE, "Wrong method signature"}, + { BLUEZ_EDBUS_WRONG_PARAM, "Invalid parameters"}, + { BLUEZ_EDBUS_RECORD_NOT_FOUND, "No record found"}, + { 0, NULL } +}; + +static const char *bluez_dbus_error_to_str(const uint32_t ecode) +{ + const bluez_error_t *ptr; + uint32_t raw_code = 0; + + syslog (LOG_INFO, "%s - line:%d", __PRETTY_FUNCTION__, __LINE__); + + if (ecode & BLUEZ_ESYSTEM_OFFSET) { + /* System error */ + syslog (LOG_INFO, "%s - line:%d", __PRETTY_FUNCTION__, __LINE__); + raw_code = (!BLUEZ_ESYSTEM_OFFSET) & ecode; + syslog(LOG_INFO, "%s - msg:%s", __PRETTY_FUNCTION__, strerror(raw_code)); + return strerror(raw_code); + } else if (ecode & BLUEZ_EDBUS_OFFSET) { + /* D-Bus error */ + syslog (LOG_INFO, "%s - line:%d", __PRETTY_FUNCTION__, __LINE__); + for (ptr = error_array; ptr->code; ptr++) { + if(ptr->code == ecode) { + syslog(LOG_INFO, "%s - msg:%s", __PRETTY_FUNCTION__, ptr->str); + return ptr->str; + } + } + } + return NULL; +} + +DBusMessage *bluez_new_failure_msg(DBusMessage *msg, const uint32_t ecode) +{ + DBusMessageIter iter; + DBusMessage *reply = NULL; + const char *error_msg = NULL; + + syslog (LOG_INFO, "%s - line:%d", __PRETTY_FUNCTION__, __LINE__); + + error_msg = bluez_dbus_error_to_str(ecode); + + if (error_msg) { + + reply = dbus_message_new_error(msg, BLUEZ_DBUS_ERR_FAILED, error_msg); + + dbus_message_iter_init_append(reply, &iter); + dbus_message_iter_append_basic(&iter, DBUS_TYPE_UINT32 ,&ecode); + } + + return reply; +} + +/* + * Object path register/unregister functions + * + */ +static profile_obj_path_data_t obj_path_table[] = { + {BLUEZ_DBUS_HCI, 1, 0, hci_dbus_reg_obj_path, hci_dbus_unreg_obj_path, get_hci_table }, + /*{ BLUEZ_DBUS_SDP, 0, 0, sdp_dbus_reg_obj_path, sdp_dbus_unreg_obj_path, NULL },*/ + /*{ BLUEZ_DBUS_NET, 0, 0, net_dbus_reg_obj_path, net_dbus_unreg_obj_path, NULL },*/ + /*{ BLUEZ_DBUS_HID, 0, 0, hid_dbus_reg_obj_path, hid_dbus_unreg_obj_path , NULL },*/ + /*{ BLUEZ_DBUS_SERIAL, 0, 0, serial_dbus_reg_obj_path, serial_dbus_unreg_obj_path, NULL },*/ + {NULL, 0, 0, NULL, NULL, NULL} +}; + +/* + * Device Message handler functions object table declaration + */ +static DBusHandlerResult msg_func(DBusConnection *conn, DBusMessage *msg, void *data); + +static DBusMessage* handle_get_devices_req(DBusMessage *msg, void *data); +static DBusMessage* handle_not_implemented_req(DBusMessage *msg, void *data); + +static const DBusObjectPathVTable obj_vtable = { + NULL, + &msg_func, + NULL, + NULL, + NULL, + NULL +}; + +/* + * Service provided under the path BLUEZ_DBUS_DEVS_PATH + * TODO add the handlers + */ +static const service_table_t dev_services[] = { + {DEV_UP_REQ, handle_not_implemented_req, DEV_UP_REQ_SIGNATURE}, + {DEV_DOWN_REQ, handle_not_implemented_req, DEV_DOWN_REQ_SIGNATURE}, + {DEV_RESET_REQ, handle_not_implemented_req, DEV_RESET_REQ_SIGNATURE }, + {DEV_SET_PROPERTY_REQ, handle_not_implemented_req, DEV_SET_PROPERTY_REQ_SIGNATURE }, + {DEV_GET_PROPERTY_REQ, handle_not_implemented_req, DEV_GET_PROPERTY_REQ_SIGNATURE }, + {NULL, NULL, NULL} +}; + +/* + * Manager Message handler functions object table declaration + * + */ +static const service_table_t mgr_services[] = { + {MGR_GET_DEV_REQ, handle_get_devices_req, MGR_GET_DEV_REQ_SIGNATURE}, + {MGR_INIT_REQ, handle_not_implemented_req, NULL }, + {MGR_ENABLE_REQ, handle_not_implemented_req, NULL }, + {MGR_DISABLE_REQ, handle_not_implemented_req, NULL }, + {NULL, handle_not_implemented_req, NULL} +}; + + +/* + * HCI Manager Message handler functions object table declaration + * + */ +static DBusHandlerResult hci_signal_filter (DBusConnection *conn, DBusMessage *msg, void *data); + +static DBusMessage* handle_periodic_inq_req(DBusMessage *msg, void *data); +static DBusMessage* handle_cancel_periodic_inq_req(DBusMessage *msg, void *data); +static DBusMessage* handle_inq_req(DBusMessage *msg, void *data); +static DBusMessage* handle_role_switch_req(DBusMessage *msg, void *data); + +static const service_table_t hci_services[] = { + {HCI_PERIODIC_INQ_REQ, handle_periodic_inq_req, HCI_PERIODIC_INQ_REQ_SIGNATURE}, + {HCI_CANCEL_PERIODIC_INQ_REQ, handle_cancel_periodic_inq_req, HCI_CANCEL_PERIODIC_INQ_REQ_SIGNATURE}, + {HCI_ROLE_SWITCH_REQ, handle_role_switch_req, HCI_ROLE_SWITCH_REQ_SIGNATURE}, + {HCI_INQ_REQ, handle_inq_req, HCI_INQ_REQ_SIGNATURE}, + {NULL, NULL, NULL} +}; static void reply_handler_function(DBusPendingCall *call, void *user_data) { @@ -170,8 +382,9 @@ baswap(&tmp, local); local_addr = batostr(&tmp); - message = dbus_message_new_signal("/org/bluez/DevAgent", - "org.bluez.DevAgent", "InquiryStart"); + message = dbus_message_new_signal(BLUEZ_DBUS_HCI_PATH, + BLUEZ_DBUS_HCI_INTERFACE, + BLUEZ_DBUS_HCI_SIG_INQ_START); if (message == NULL) { syslog(LOG_ERR, "Can't allocate D-BUS inquiry start message"); goto failed; @@ -204,8 +417,9 @@ baswap(&tmp, local); local_addr = batostr(&tmp); - message = dbus_message_new_signal("/org/bluez/DevAgent", - "org.bluez.DevAgent", "InquiryComplete"); + message = dbus_message_new_signal(BLUEZ_DBUS_HCI_PATH, + BLUEZ_DBUS_HCI_INTERFACE, + BLUEZ_DBUS_HCI_SIG_INQ_COMPLETE); if (message == NULL) { syslog(LOG_ERR, "Can't allocate D-BUS inquiry complete message"); goto failed; @@ -241,8 +455,9 @@ baswap(&tmp, local); local_addr = batostr(&tmp); baswap(&tmp, peer); peer_addr = batostr(&tmp); - message = dbus_message_new_signal("/org/bluez/DevAgent", - "org.bluez.DevAgent", "InquiryResult"); + message = dbus_message_new_signal(BLUEZ_DBUS_HCI_PATH, + BLUEZ_DBUS_HCI_INTERFACE, + BLUEZ_DBUS_HCI_SIG_INQ_RESULT); if (message == NULL) { syslog(LOG_ERR, "Can't allocate D-BUS inquiry result message"); goto failed; @@ -280,8 +495,9 @@ baswap(&tmp, local); local_addr = batostr(&tmp); baswap(&tmp, peer); peer_addr = batostr(&tmp); - message = dbus_message_new_signal("/org/bluez/DevAgent", - "org.bluez.DevAgent", "RemoteName"); + message = dbus_message_new_signal(BLUEZ_DBUS_HCI_PATH, + BLUEZ_DBUS_HCI_INTERFACE, + BLUEZ_DBUS_HCI_SIG_REMOTE_NAME); if (message == NULL) { syslog(LOG_ERR, "Can't allocate D-BUS remote name message"); goto failed; @@ -388,6 +604,8 @@ { DBusError error; + num_adapters = 0; + dbus_error_init(&error); connection = dbus_bus_get(DBUS_BUS_SYSTEM, &error); @@ -398,8 +616,774 @@ return FALSE; } + dbus_bus_request_name(connection, BLUEZ_DBUS_NAME, + DBUS_NAME_FLAG_PROHIBIT_REPLACEMENT, + &error); + + if (dbus_error_is_set (&error)) { + syslog(LOG_ERR,"D-Bus Error: %s\n", error.message); + dbus_error_free (&error); + return FALSE; + } + + //Registering the device path + if (!dbus_connection_register_object_path(connection, BLUEZ_DBUS_DEVS_PATH, &obj_vtable, NULL)) { + syslog(LOG_ERR,"DBUS failed to register %s object", BLUEZ_DBUS_DEVS_PATH); + return FALSE; + } else { + syslog(LOG_INFO,"registering - path:%s", BLUEZ_DBUS_DEVS_PATH); + } + + //Registering the manager path + if (!dbus_connection_register_object_path(connection, BLUEZ_DBUS_MGR_PATH, &obj_vtable, NULL)) { + syslog(LOG_ERR,"DBUS failed to register %s object", BLUEZ_DBUS_MGR_PATH); + return FALSE; + } else { + syslog(LOG_INFO,"registering - path:%s", BLUEZ_DBUS_MGR_PATH); + } + + + if (!dbus_connection_add_filter (connection, hci_signal_filter, NULL, NULL)) { + syslog(LOG_ERR,"DBUS failed to add filter"); + return FALSE; + } + dbus_connection_set_watch_functions(connection, add_watch, remove_watch, watch_toggled, NULL, NULL); return TRUE; } + +/* + * @brief This function is responsible for register all service for + * each new hci device + * Detailed description: When a HCI_DEV_UP event is received or the + * daemon is initialized the service paths must be registered. eg: + * pan, sdp, hci, rfcomm paths. + * @param id device id + * @return TRUE/FALSE + */ +gboolean mgr_dbus_reg_device_paths(uint16_t id) +{ + profile_obj_path_data_t *ptr = obj_path_table; + int8_t ret = 0; + + if (connection) { + for (;ptr->name; ptr++) { + ret = (ptr->reg_func(connection, ptr->dft_reg, id)); + if (ret < 0) { + break; + } + /* the default path is now registered */ + ptr->dft_reg = 1; + } + + if (!ret) { + num_adapters++; + } + return TRUE; + } else { + return FALSE; + } +} + +/* + * @brief This function is responsible for unregister all service for + * a detached hci device + * Detailed description: When a HCI_DEV_DOWN event is received the + * service paths must be unregistered. eg: pan, sdp, hci, rfcomm paths. + * @param id device id + * @return TRUE/FALSE + */ +gboolean mgr_dbus_unreg_device_paths(uint16_t id) +{ + profile_obj_path_data_t *ptr = obj_path_table; + uint8_t dft_unreg = 0; + + if (connection) { + for (;ptr->name; ptr++) { + dft_unreg = (num_adapters > 1)? 0:1; + num_adapters--; + ptr->unreg_func(connection, dft_unreg, id); + + if (dft_unreg ) { + ptr->dft_reg = 0; + } + } + return TRUE; + } else { + return FALSE; + } +} + +/* + * @brief HCI object path register function + * Detailed description: function responsible for register a new hci + * D-Bus path. If necessary the default path must be registered too. + * @param conn D-Bus connection + * @param dft_reg register the default path(0 or !0) + * @param id hci device identification + * @return (0-Success/-1 failure) + */ +int8_t hci_dbus_reg_obj_path(DBusConnection *conn, uint8_t dft_reg, uint16_t id) +{ + char path[MAX_PATH_LENGTH]; + int8_t ret = 0; + uint16_t *ptr_id = (int16_t*)malloc(1); + uint16_t *ptr_id_dft; + + /* register the default path*/ + if (!dft_reg) { + ptr_id_dft = (int16_t*)malloc(1); + *ptr_id_dft = DFT_DEVICE_ID; + sprintf(path, "%s/%s/%s", BLUEZ_DBUS_MGR_PATH, HCI_DFT_DEVICE_NAME, BLUEZ_DBUS_HCI); + + syslog(LOG_INFO, "registering dft path:%s - id:%d", path, DFT_DEVICE_ID); + + if (!dbus_connection_register_fallback(conn, path, &obj_vtable, ptr_id_dft)) { + syslog(LOG_ERR,"DBUS failed to register %s object", path); + //ignore, the default path was already registered + } + + } + + *ptr_id = id; + + /* register the default path*/ + sprintf(path, "%s/%s%d/%s", BLUEZ_DBUS_MGR_PATH, HCI_DEVICE_NAME, id ,BLUEZ_DBUS_HCI); + + syslog(LOG_INFO, "registering - path:%s - id:%d",path, id); + + if (!dbus_connection_register_fallback(conn, path, &obj_vtable, ptr_id)) { + syslog(LOG_ERR,"DBUS failed to register %s object", path); + return (-1); + } + + return ret; +} + +/* + * @brief HCI object path unregister function + * Detailed description: function responsible for unregister HCI D-Bus + * path for a detached hci device. If necessary the default path must + * be registered too. + * @param conn D-Bus connection + * @param unreg_dft register the default path(0 or !0) + * @param id hci device identification + * @return (0-Success/-1 failure) + */ +int8_t hci_dbus_unreg_obj_path(DBusConnection *conn, uint8_t unreg_dft, uint16_t id) +{ + int8_t ret = 0; + char path[MAX_PATH_LENGTH]; + char dft_path[MAX_PATH_LENGTH]; + uint16_t *data; + + if (unreg_dft) { + sprintf(dft_path, "%s/%s/%s", BLUEZ_DBUS_MGR_PATH, HCI_DFT_DEVICE_NAME, BLUEZ_DBUS_HCI); + syslog(LOG_INFO, "%s - unregistering dft:%s", __PRETTY_FUNCTION__, dft_path); + if (!dbus_connection_unregister_object_path (connection, dft_path)) { + syslog(LOG_ERR,"DBUS failed to unregister %s object", dft_path); + ret = -1; + } else { + if(dbus_connection_get_object_path_data(conn, dft_path, (void*)&data)) + { + if(data) + free(data); + data = NULL; + } + } + + } + + sprintf(path, "%s/%s%d/%s", BLUEZ_DBUS_MGR_PATH, HCI_DEVICE_NAME, id, BLUEZ_DBUS_HCI); + syslog(LOG_INFO, "%s - unregistering spec:%s", __PRETTY_FUNCTION__, path); + if (!dbus_connection_unregister_object_path (connection, path)) { + syslog(LOG_ERR,"DBUS failed to unregister %s object", path); + ret = -1; + } else { + if(dbus_connection_get_object_path_data(conn, path, (void*)&data)) + { + if(data) + free(data); + data = NULL; + } + } + + return ret; +} + + +const service_table_t *get_hci_table(void) { + return hci_services; +} +/***************************************************************** + * + * Section reserved to HCI Manaher D-Bus message handlers + * + *****************************************************************/ +void hcid_dbus_exit(void) +{ + char path[MAX_PATH_LENGTH]; + char fst_parent[] = BLUEZ_DBUS_MGR_PATH; + char snd_parent[MAX_PATH_LENGTH]; + char **fst_level = NULL; + char **snd_level = NULL; + char *ptr1; + char *ptr2; + + if (!connection) + return; + /* unregister all objects paths */ + + if (!dbus_connection_unregister_object_path (connection, BLUEZ_DBUS_DEVS_PATH)) { + syslog(LOG_ERR,"DBUS failed to unregister %s object", BLUEZ_DBUS_DEVS_PATH); + } else { + syslog(LOG_INFO,"unregistering - path:%s", BLUEZ_DBUS_DEVS_PATH); + } + + if (!dbus_connection_unregister_object_path (connection, BLUEZ_DBUS_MGR_PATH)) { + syslog(LOG_ERR,"DBUS failed to unregister %s object", BLUEZ_DBUS_MGR_PATH); + } else { + syslog(LOG_INFO,"unregistering - path:%s", BLUEZ_DBUS_MGR_PATH); + } + + //getting the first level + dbus_connection_list_registered(connection, fst_parent, &fst_level); + + for ( ;*fst_level; fst_level++) { + ptr1 = *fst_level; + sprintf(snd_parent, "%s/%s", fst_parent, ptr1); + + //getting the second level + dbus_connection_list_registered(connection, snd_parent, &snd_level); + + if (!(*snd_level)) { + //no child + sprintf(path, "%s/%s", BLUEZ_DBUS_MGR_PATH, ptr1); + + syslog(LOG_INFO, "unregistering path: %s", path); + + if (!dbus_connection_unregister_object_path (connection, path)) { + syslog(LOG_ERR,"DBUS failed to unregister %s object", path); + } + continue; + } + + for ( ;*snd_level; snd_level++) { + //unregistering child level path + ptr2 = *snd_level; + sprintf(path, "%s/%s/%s", BLUEZ_DBUS_MGR_PATH, ptr1, ptr2); + + syslog(LOG_INFO, "unregistering path: %s", path); + + if (!dbus_connection_unregister_object_path (connection, path)) { + syslog(LOG_ERR,"DBUS failed to unregister %s object", path); + } + } + if (*snd_level) + dbus_free_string_array(snd_level); + } + + if (*fst_level) + dbus_free_string_array(fst_level); +} + +static DBusHandlerResult hci_signal_filter (DBusConnection *conn, DBusMessage *msg, void *data) +{ + DBusHandlerResult ret = DBUS_HANDLER_RESULT_NOT_YET_HANDLED; + const char *iface; + const char *method; + + if (!msg || !conn) + return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; + + if (dbus_message_get_type (msg) != DBUS_MESSAGE_TYPE_SIGNAL) + return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; + + iface = dbus_message_get_interface(msg); + method = dbus_message_get_member(msg); + + if (strcmp(iface, DBUS_INTERFACE_LOCAL) == 0) { + if (strcmp(method, "Disconnected") == 0){ + ret = DBUS_HANDLER_RESULT_HANDLED; + } + } else if (strcmp(iface, DBUS_INTERFACE_DBUS) == 0) { + if (strcmp(method, "NameOwnerChanged") == 0) { + ret = DBUS_HANDLER_RESULT_HANDLED; + } + if (strcmp(method, "NameAcquired") == 0) { + ret = DBUS_HANDLER_RESULT_HANDLED; + } + } + return ret; +} +/* + * There is only one message handler function for all object paths + * + */ + +static DBusHandlerResult msg_func(DBusConnection *conn, + DBusMessage *msg, void *data) +{ + const service_table_t *ptr_handlers = NULL; + DBusMessage *reply = NULL; + uint16_t type; + const char *iface; + const char *method; + const char *signature; + const char *path; + const char *rel_path; + const char *tmp_iface = NULL; + uint32_t result = BLUEZ_EDBUS_UNKNOWN_METHOD; + DBusHandlerResult ret = DBUS_HANDLER_RESULT_NOT_YET_HANDLED;; + uint8_t found = 0; + + + path = dbus_message_get_path(msg); + type = dbus_message_get_type(msg); + iface = dbus_message_get_interface(msg); + method = dbus_message_get_member (msg); + signature = dbus_message_get_signature(msg); + + syslog (LOG_INFO, "%s - path:%s", __PRETTY_FUNCTION__, path); + + //get the user data + if (strcmp(path, BLUEZ_DBUS_DEVS_PATH) == 0) { + ptr_handlers = dev_services; + tmp_iface = BLUEZ_DBUS_DEVS_INTERFACE; + found = 1; + } else if (strcmp(path, BLUEZ_DBUS_MGR_PATH) == 0) { + ptr_handlers = mgr_services; + tmp_iface = BLUEZ_DBUS_MGR_INTERFACE; + found = 1; + } else { + /* only msg to registered object paths will be received */ + + profile_obj_path_data_t *mgr_child = obj_path_table; + rel_path = strrchr(path,'/'); + rel_path++; + + if (rel_path) { + for (;mgr_child->name; mgr_child++) { + if(strcmp(mgr_child->name, rel_path) == 0) { + ptr_handlers = mgr_child->get_svc_table(); + found = 1; + } + } + + tmp_iface = BLUEZ_DBUS_MGR_INTERFACE; + } + } + + if (found && (type == DBUS_MESSAGE_TYPE_METHOD_CALL) && + (strcmp(iface, tmp_iface) == 0) && (method != NULL)) { + + for (; ptr_handlers->name; ptr_handlers++) { + if (strcmp(method, ptr_handlers->name) == 0) { + /* resetting unknown method. It's possible handle method overload */ + result = BLUEZ_EDBUS_WRONG_SIGNATURE; + if (strcmp(ptr_handlers->signature, signature) == 0) { + if(ptr_handlers->handler_func) { + reply = (ptr_handlers->handler_func)(msg, data); + result = 0; /* resetting wrong signature*/ + } else { + syslog(LOG_INFO, "Service not implemented"); + } + break; + } + + } + } + + if (result) { + reply = bluez_new_failure_msg(msg, result); + syslog(LOG_INFO, "%s - %s", __PRETTY_FUNCTION__, + (result == BLUEZ_EDBUS_UNKNOWN_METHOD?"Unknown Method": "Wrong signature")); + } + + /* send an error or the success reply*/ + if (reply) { + if (!dbus_connection_send (conn, reply, NULL)) { + syslog(LOG_ERR, "%s line:%d Can't send reply message!", \ + __PRETTY_FUNCTION__, __LINE__) ; + } + dbus_message_unref (reply); + } + + ret = DBUS_HANDLER_RESULT_HANDLED; + } else { + syslog(LOG_INFO, "Request not handled"); + } + return ret; +} + + +static DBusMessage* handle_periodic_inq_req(DBusMessage *msg, void *data) +{ + write_inquiry_mode_cp inq_mode; + periodic_inquiry_cp inq_param; + DBusMessageIter iter; + DBusMessage *reply = NULL; + const uint16_t *udata = (uint16_t *)data; + uint8_t length; + uint8_t max_period; + uint8_t min_period; + int32_t sock = -1; + int32_t dev_id = -1; + + if (*udata == DFT_DEVICE_ID) { + if ((dev_id = hci_get_route(NULL)) < 0) { + syslog(LOG_ERR, "Bluetooth device is not available"); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_ENODEV); + goto cleanup; + + } + } else { + dev_id = *udata; + } + + syslog(LOG_INFO, "%s - line:%d - dev_id:%d", __PRETTY_FUNCTION__, __LINE__, dev_id); + + if ((sock = hci_open_dev(dev_id)) < 0) { + syslog(LOG_ERR, "HCI device open failed"); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_ENODEV); + goto cleanup; + } + + dbus_message_iter_init(msg, &iter); + dbus_message_iter_get_basic(&iter, &length); + dbus_message_iter_next(&iter); + dbus_message_iter_get_basic(&iter, &min_period); + dbus_message_iter_next(&iter); + dbus_message_iter_get_basic(&iter, &max_period); + + if ((length >= min_period) || (min_period >= max_period)) { + reply = bluez_new_failure_msg(msg, BLUEZ_EDBUS_WRONG_PARAM); + goto cleanup; + } + + inq_param.num_rsp = 100; + inq_param.length = length; + + inq_param.max_period = max_period; + inq_param.min_period = min_period; + + /* General/Unlimited Inquiry Access Code (GIAC) */ + inq_param.lap[0] = 0x33; + inq_param.lap[1] = 0x8b; + inq_param.lap[2] = 0x9e; + + inq_mode.mode = 1; //INQUIRY_WITH_RSSI; + + if (hci_send_cmd(sock, OGF_HOST_CTL, OCF_WRITE_INQUIRY_MODE, + WRITE_INQUIRY_MODE_CP_SIZE, &inq_mode) < 0) { + syslog(LOG_ERR, "Can't set inquiry mode:%s.", strerror(errno)); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_OFFSET + errno); + goto cleanup; + } + + if (hci_send_cmd(sock, OGF_LINK_CTL, OCF_PERIODIC_INQUIRY, + PERIODIC_INQUIRY_CP_SIZE, &inq_param) < 0) { + syslog(LOG_ERR, "Can't send HCI commands:%s.", strerror(errno)); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_OFFSET + errno); + goto cleanup; + } else { + + uint8_t result = 0; + /* return TRUE to indicate that operation was completed */ + reply = dbus_message_new_method_return(msg); + dbus_message_iter_init_append(reply, &iter); + dbus_message_iter_append_basic(&iter, DBUS_TYPE_BYTE ,&result); + } + +cleanup: + + if (sock > 0) + close(sock); + + return reply; +} + +static DBusMessage* handle_cancel_periodic_inq_req(DBusMessage *msg, void *data) +{ + DBusMessageIter iter; + DBusMessage *reply = NULL; + const uint16_t *udata = (uint16_t *)data; + int32_t sock = -1; + int32_t dev_id = -1; + + if (*udata == DFT_DEVICE_ID) { + if ((dev_id = hci_get_route(NULL)) < 0) { + syslog(LOG_ERR, "Bluetooth device is not available"); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_ENODEV); + goto cleanup; + + } + } else { + dev_id = *udata; + } + + syslog(LOG_INFO, "%s - line:%d - dev_id:%d", __PRETTY_FUNCTION__, __LINE__, dev_id); + + if ((sock = hci_open_dev(dev_id)) < 0) { + syslog(LOG_ERR, "HCI device open failed"); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_ENODEV); + goto cleanup; + } + + if (hci_send_cmd(sock, OGF_LINK_CTL, OCF_EXIT_PERIODIC_INQUIRY, 0 , NULL) < 0) { + syslog(LOG_ERR, "Send hci command failed."); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_OFFSET + errno); + } else { + uint8_t result = 0; + /* return TRUE to indicate that operation was completed */ + reply = dbus_message_new_method_return(msg); + dbus_message_iter_init_append(reply, &iter); + dbus_message_iter_append_basic(&iter, DBUS_TYPE_BYTE ,&result); + } + +cleanup: + if (sock > 0) + close(sock); + + return reply; +} + +static DBusMessage* handle_inq_req(DBusMessage *msg, void *data) +{ + char addr[18]; + const char array_sig[] = HCI_INQ_REPLY_SIGNATURE; + DBusMessageIter iter; + DBusMessageIter array_iter; + DBusMessageIter struct_iter; + DBusMessage *reply = NULL; + inquiry_info *info = NULL; + const uint16_t *udata = (uint16_t *)data; + const char *paddr = addr; + int32_t dev_id = -1; + uint32_t class = 0; + uint16_t clock_offset; + uint16_t flags; + int8_t length; + int8_t num_rsp; + int8_t i; + + syslog(LOG_INFO, "%s - line:%d", __PRETTY_FUNCTION__, __LINE__); + + if (*udata == DFT_DEVICE_ID) { + if ((dev_id = hci_get_route(NULL)) < 0) { + syslog(LOG_ERR, "Bluetooth device is not available"); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_ENODEV); + goto cleanup; + } + } else { + dev_id = (int32_t)*udata; + } + + syslog(LOG_INFO, "%s - line:%d - dev_id:%d", __PRETTY_FUNCTION__, __LINE__, dev_id); + + dbus_message_iter_init(msg, &iter); + dbus_message_iter_get_basic(&iter, &length); + dbus_message_iter_next(&iter); + dbus_message_iter_get_basic(&iter, &num_rsp); + dbus_message_iter_next(&iter); + dbus_message_iter_get_basic(&iter, &flags); + + if ((length <= 0) || (num_rsp <= 0)) { + reply = bluez_new_failure_msg(msg, BLUEZ_EDBUS_WRONG_PARAM); + goto cleanup; + } + + num_rsp = hci_inquiry(dev_id, length, num_rsp, NULL, &info, flags); + + if (num_rsp < 0) { + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_OFFSET + errno); + } else { + reply = dbus_message_new_method_return(msg); + dbus_message_iter_init_append(reply, &iter); + dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, array_sig, &array_iter); + + for (i = 0; i < num_rsp; i++) { + ba2str(&(info+i)->bdaddr, addr); + + clock_offset = btohs((info+i)->clock_offset); + /* only 3 bytes are used */ + memcpy(&class, (info+i)->dev_class, 3); + + dbus_message_iter_open_container(&array_iter, DBUS_TYPE_STRUCT, NULL, &struct_iter); + dbus_message_iter_append_basic(&struct_iter, DBUS_TYPE_STRING , &paddr); + dbus_message_iter_append_basic(&struct_iter, DBUS_TYPE_UINT32 , &class); + dbus_message_iter_append_basic(&struct_iter, DBUS_TYPE_UINT16 , &clock_offset); + dbus_message_iter_close_container(&array_iter, &struct_iter); + } + dbus_message_iter_close_container(&iter, &array_iter); + } + +cleanup: + if(info) + bt_free(info); + + return NULL; +} + +static DBusMessage* handle_role_switch_req(DBusMessage *msg, void *data) +{ + DBusMessageIter iter; + DBusMessage *reply = NULL; + char *str_bdaddr = NULL; + const uint16_t *udata = (uint16_t *)data; + bdaddr_t bdaddr; + uint8_t role; + int32_t dev_id = -1, sock = -1; + + dbus_message_iter_init(msg, &iter); + dbus_message_iter_get_basic(&iter, &str_bdaddr); + dbus_message_iter_next(&iter); + dbus_message_iter_get_basic(&iter, &role); + + str2ba(str_bdaddr, &bdaddr); + + dev_id = hci_for_each_dev(HCI_UP, find_conn, (long) &bdaddr); + + + if (dev_id < 0) { + syslog(LOG_ERR, "Bluetooth device failed\n"); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_ENODEV); + goto cleanup; + } + + if (*udata != DFT_DEVICE_ID && *udata != dev_id) { + syslog(LOG_ERR, "Connection not found\n"); + reply = bluez_new_failure_msg(msg, BLUEZ_EDBUS_CONN_NOT_FOUND); + goto cleanup; + } + + syslog(LOG_INFO, "%s - line:%d - dev_id:%d", __PRETTY_FUNCTION__, __LINE__, dev_id); + + sock = hci_open_dev(dev_id); + + if (sock < 0) { + syslog(LOG_ERR, "HCI device open failed\n"); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_ENODEV); + goto cleanup; + } + + if (hci_switch_role(sock, &bdaddr, role, 10000) < 0) { + syslog(LOG_ERR, "Switch role request failed\n"); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_OFFSET + errno); + } else { + uint8_t result = 0; + /* return TRUE to indicate that operation was completed */ + reply = dbus_message_new_method_return(msg); + dbus_message_iter_init_append(reply, &iter); + dbus_message_iter_append_basic(&iter, DBUS_TYPE_BYTE, &result); + } +cleanup: + + return reply; +} + + +/***************************************************************** + * + * Section reserved to Device D-Bus message handlers + * + *****************************************************************/ +static DBusMessage* handle_get_devices_req(DBusMessage *msg, void *data) +{ + DBusMessageIter iter; + DBusMessageIter array_iter; + DBusMessageIter struct_iter; + DBusMessage *reply = NULL; + + struct hci_dev_list_req *dl = NULL; + struct hci_dev_req *dr = NULL; + struct hci_dev_info di; + int16_t i; + int32_t sock = -1; + + char aname[BLUETOOTH_DEVICE_NAME_LEN]; + char aaddr[BLUETOOTH_DEVICE_ADDR_LEN]; + char *paddr = aaddr; + char *pname = aname; + const char array_sig[] = HCI_DEVICE_STRUCT_SIGNATURE; + + syslog(LOG_INFO, "%s - line:%d", __PRETTY_FUNCTION__, __LINE__); + + /* Create and bind HCI socket */ + if ((sock = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI)) < 0) { + syslog(LOG_ERR, "Can't open HCI socket: %s (%d)", + strerror(errno), errno); + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_OFFSET + errno); + goto cleanup; + } + + + dl = malloc(HCI_MAX_DEV * sizeof(*dr) + sizeof(*dl)); + + if (!dl) { + syslog(LOG_ERR, "Can't allocate memory"); + reply = bluez_new_failure_msg(msg, BLUEZ_EDBUS_NO_MEM); + goto cleanup; + } + + dl->dev_num = HCI_MAX_DEV; + dr = dl->dev_req; + + if (ioctl(sock, HCIGETDEVLIST, (void *) dl) < 0) { + reply = bluez_new_failure_msg(msg, BLUEZ_ESYSTEM_OFFSET + errno); + goto cleanup; + } + + + /* active bluetooth adapter found */ + reply = dbus_message_new_method_return(msg); + dbus_message_iter_init_append(reply, &iter); + dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, array_sig, &array_iter); + dr = dl->dev_req; + + for (i = 0; i < dl->dev_num; i++, dr++) { + if (hci_test_bit(HCI_UP, &dr->dev_opt)) { + memset(&di, 0 , sizeof(struct hci_dev_info)); + di.dev_id = dr->dev_id; + + if (!ioctl(sock, HCIGETDEVINFO, (void *) &di)) { + strcpy(aname, di.name); + ba2str(&di.bdaddr, aaddr); + dbus_message_iter_open_container(&array_iter, DBUS_TYPE_STRUCT, NULL, + &struct_iter); + dbus_message_iter_append_basic(&struct_iter, DBUS_TYPE_STRING ,&pname); + dbus_message_iter_append_basic(&struct_iter, DBUS_TYPE_STRING ,&paddr); + syslog(LOG_INFO, "%s - (%s, %s)", __PRETTY_FUNCTION__, pname, paddr); + + dbus_message_iter_close_container(&array_iter, &struct_iter); + } + } + } + dbus_message_iter_close_container(&iter, &array_iter); + +cleanup: + if (dl) + free(dl); + + if (sock > 0) + close (sock); + + return reply; +} + +static DBusMessage* handle_not_implemented_req(DBusMessage *msg, void *data) { + const char *path; + const char *iface; + const char *method; + + path = dbus_message_get_path(msg); + iface = dbus_message_get_interface(msg); + method = dbus_message_get_member(msg); + + syslog(LOG_INFO, "Not Implemented - path:%s, iface:%s method:%s", path, iface, method); + + return NULL; + +} --- bluez-utils-cvs.orig/hcid/main.c 2005-07-05 18:15:44.000000000 -0300 +++ bluez-utils-cvs-hcid/hcid/main.c 2005-10-03 10:58:28.000000000 -0300 @@ -375,6 +375,9 @@ if (hcid.security && hci_test_bit(HCI_UP, &dr->dev_opt)) start_security_manager(dr->dev_id); +#ifdef ENABLE_DBUS + mgr_dbus_reg_device_paths(dr->dev_id); +#endif } free(dl); @@ -438,12 +441,18 @@ configure_device(sd->dev_id); if (hcid.security) start_security_manager(sd->dev_id); +#ifdef ENABLE_DBUS + mgr_dbus_reg_device_paths(sd->dev_id); +#endif break; case HCI_DEV_DOWN: syslog(LOG_INFO, "HCI dev %d down", sd->dev_id); if (hcid.security) stop_security_manager(sd->dev_id); +#ifdef ENABLE_DBUS + mgr_dbus_unreg_device_paths(sd->dev_id); +#endif break; } } @@ -627,7 +636,9 @@ g_main_run(event_loop); free_device_opts(); - +#ifdef ENABLE_DBUS + hcid_dbus_exit(); +#endif syslog(LOG_INFO, "Exit."); return 0; }