Re: [Bluez-users] hcid not working - bluez 3.9

["Claudio Takahasi" <cktakahasi@gmail.com>]

On 4/2/07, Sumeet VERMA <sumeet.verma@st.com> wrote:
> Hi Marcel,
> How would I know that the system bus is up and running? Basically I think
> the problem is the socket system_bus_socket is created in /var/run/dbus
> instead of /usr/local/var/run/dbus.
>
> I tried to configure the dbus-0.61 package with the following string
>
> ./configure --prefix=/usr/local --disable-gtk --disable-selinux
> --with-session-socket-dir=/usr/local/var/run/dbus
> --with-dbus-user=messagebus --with-test-socket-dir=/usr/local/var/run/dbus
> But still it doesn't work.
>
> Any pointers?
>
> Regards,
>
> Sumeet

Hi Sumeet,

Here are my message BUS processes  running:

1001      4725     1  0 08:36 ?        00:00:00 /usr/bin/dbus-daemon
--fork --print-pid 8 --print-address 6 --session
104       6791     1  0 09:07 ?        00:00:00 /usr/bin/dbus-daemon --system

Check the following lock file in order to verify if the system BUS is running:
/var/run/dbus/pid

Remove this file if the system message BUS is not running and execute
"dbus-daemon --system"

BR,
Claudio.
-- 
---------------------------------------------------------
Claudio Takahasi
Instituto Nokia de Tecnologia - INdT


> -----Original Message-----
> From: bluez-users-bounces@lists.sourceforge.net
> [mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Marcel
> Holtmann
> Sent: Saturday, March 31, 2007 7:16 PM
> To: BlueZ users
> Subject: Re: [Bluez-users] hcid not working - bluez 3.9
>
> Hi Sumeet,
>
> > I have been trying to bring up bluez-utils-3.9 and hcid is not
> > working. It says
> >
> > [root@dlhl0330 tools]# hcid -n
> > hcid[29560]: Bluetooth HCI daemon
> > hcid[29560]: Can't connect to system message bus: Failed to connect to
> > socket /usr/local/var/run/dbus/system_bus_socket: No such file or
> > directory
> > hcid[29560]: Unable to get on D-Bus
> >
> > I have looked into the mailing list and followed the mentioned
> > procedure. I have installed dbus-0.61 and started the system bus by
> > calling dbus-launch
> >
> > [root@dlhl0330 dbus]# dbus-launch
> > DBUS_SESSION_BUS_ADDRESS='unix:abstract=/tmp/dbus-
> > BcAG8pbfI2,guid=adea0b46b6c8607cd9bc4162ffe90200';
> > DBUS_SESSION_BUS_PID=29606;
> > [root@dlhl0330 dbus]#
> >
> > I can see the dbus-daemon running when is do ps -e
> >
> > system_bus_socket is present at the location
> > /var/run/dbus/system_bus_socket Is there any way I can configure hcid
> > to take the system_bus_socket from /var/run/dbus instead of
> > /usr/local/var/run/dbus
>
> the session bus is not the same as the system bus. You need a running system
> bus for hcid. And normally your distribution ensures that it is setup
> correctly.
>
> Regards
>
> Marcel

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users