From: Anderson Briglia <briglia.anderson@gmail.com>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] snd-bt-sco on an UART bluetooth device
Date: Thu, 29 Sep 2005 11:45:49 -0400 [thread overview]
Message-ID: <e555255705092908451b2be938@mail.gmail.com> (raw)
Hi all,
I'm trying to use the snd-bt-sco driver and btsco application (both
for using a bluetooth headset). When I used a usb bluetooth dongle,
everything was ok. But, when I use the bluetooh on-board (UART type),
the sound on bluetooth headset is very bad and I can't hear anything,
just noise.
I tryed to change the ACL MTU and SCO MTU to be the same on the UART
bluetooth and usb bluetooth, but I got the same problem with the sound
on bt headset.
I'm using a btsco version 0.4. And this is the output from a hciconfig
command typed on the device:
hci0: Type: UART
BD Address: 00:12:37:20:BF:F0 ACL MTU: 339:6 SCO MTU: 180:4
UP RUNNING
RX bytes:562 acl:0 sco:0 events:15 errors:0
TX bytes:10150 acl:0 sco:0 commands:14 errors:0
Somebody can help me?
Thanks in advance,
Anderson
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next reply other threads:[~2005-09-29 15:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-29 15:45 Anderson Briglia [this message]
2005-09-29 15:58 ` [Bluez-devel] snd-bt-sco on an UART bluetooth device Brad Midgley
2005-09-29 19:22 ` Dimitry Andric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e555255705092908451b2be938@mail.gmail.com \
--to=briglia.anderson@gmail.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).