From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: From: Anderson Briglia To: bluez-devel@lists.sourceforge.net MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Subject: [Bluez-devel] snd-bt-sco on an UART bluetooth device Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 29 Sep 2005 11:45:49 -0400 Hi all, I'm trying to use the snd-bt-sco driver and btsco application (both for using a bluetooth headset). When I used a usb bluetooth dongle, everything was ok. But, when I use the bluetooh on-board (UART type), the sound on bluetooth headset is very bad and I can't hear anything, just noise. I tryed to change the ACL MTU and SCO MTU to be the same on the UART bluetooth and usb bluetooth, but I got the same problem with the sound on bt headset. I'm using a btsco version 0.4. And this is the output from a hciconfig command typed on the device: hci0: Type: UART BD Address: 00:12:37:20:BF:F0 ACL MTU: 339:6 SCO MTU: 180:4 UP RUNNING RX bytes:562 acl:0 sco:0 events:15 errors:0 TX bytes:10150 acl:0 sco:0 commands:14 errors:0 Somebody can help me? Thanks in advance, Anderson ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel