[Bluez-users] Re: Re: Re: Re: Help me! hciattach have no error msg, but hciconfig don't find the device.

[Bluez-users] Re: Re: Re: Re: Help me! hciattach have no error msg, but hciconfig don't find the device.

[zhu yong]

[-- Attachment #1: Type: text/plain, Size: 1032 bytes --]

Hi,Erwin
Follows your suggestion, I want to download bluez-utils-2.10 and
bluez-libs-2.10 package from
http://bluez.sf.net/download/bluez-utils-2.10.tar.gz
But, I can not download these source because of network enviroment.
Can you do me a favor to send me the copy of bluez-utils-2.10 and
bluez-libs-2.10 package to my email(zhuyong0003@gmail.com)?

Thanks a lot.

Best regards
yong Zhu

Am Donnerstag, den 02.03.2006, 23:08 +0800 schrieb zhu yong:
> Hi,Erwin
> my board use Samsung 44B0x chip of ATM7TDMI. I use bluez-utils-2.24
> and bluez-libs-2.24.
> Do I need patchs for non-mmu systems?
> Is 'startup script'  /etc/hcid.conf?
> I have no ides how to change the file, I use default config.

>The default config should be ok. Some patches are necessary because of
>the fork() restrictions on nommu (they may be different for 2.24!):
>http://home.at/cgi-bin/viewcvs.cgi/midori/sources/bluez-utils-2.10/

>My startup script works as follows:

>/sbin/hcid -n &
>/sbin/hciattach ttyS0 csr &

>-Erwin

[-- Attachment #2: Type: text/html, Size: 1521 bytes --]

[Bluez-users] Re: Re: Re: Re: Help me! hciattach have no error msg, but hciconfig don't find the device.

[zhu yong]

[-- Attachment #1: Type: text/plain, Size: 1407 bytes --]

Hi,Erwin
Follows your suggestion, I want to download bluez-utils-2.10 and
bluez-libs-2.10 package.I use your patch to bluez-utils-2.10.
Because of uclinux on my board, I copy my /bluez to my target root without
/bluez/include and /bluez/lib.

I use cmd "hciattach /dev/ttyS1 bcsp 115200 noflow" to attach my uart
bluetooth device,but have some hdr error. info as follows:
"bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
......"
And I use cmd "hcid".But I find the cmd run without stop.
hciattach is error so hcid is error?

In addition, the device is good used by my PC.

Thanks a lot.

Best regards
yong Zhu

Am Donnerstag, den 02.03.2006, 23:08 +0800 schrieb zhu yong:
> Hi,Erwin
> my board use Samsung 44B0x chip of ATM7TDMI. I use bluez-utils-2.24
> and bluez-libs-2.24.
> Do I need patchs for non-mmu systems?
> Is 'startup script'  /etc/hcid.conf?
> I have no ides how to change the file, I use default config.

>The default config should be ok. Some patches are necessary because of
>the fork() restrictions on nommu (they may be different for 2.24!):
>http://home.at/cgi-bin/viewcvs.cgi/midori/sources/bluez-utils-2.10/

>My startup script works as follows:

>/sbin/hcid -n &
>/sbin/hciattach ttyS0 csr &

>-Erwin

[-- Attachment #2: Type: text/html, Size: 1831 bytes --]

[Bluez-users] Re: Re: Re: Re: Help me! hciattach have no error msg, but hciconfig don't find the device.

[zhu yong]

[-- Attachment #1: Type: text/plain, Size: 775 bytes --]

Hi,Erwin
Follows your suggestion, I want to download bluez-utils-2.10 and
bluez-libs-2.10 package.I use your patch to bluez-utils-2.10.
Because of uclinux on my board, I copy my /bluez to my target root without
/bluez/include and /bluez/lib.

I use cmd "hciattach /dev/ttyS1 bcsp 115200 noflow" to attach my uart
bluetooth device,but have some hdr error. info as follows:
"bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
......"
And I use cmd "hcid".But I find the cmd run without stop.
hciattach is error so hcid is error?

In addition, the device is good used by my PC.

Thanks a lot.

Best regards
yong Zhu

[-- Attachment #2: Type: text/html, Size: 855 bytes --]