From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: To: bluez-users@lists.sourceforge.net From: Benjamin Eikel Message-ID: References: <434E9DCE.6090402@gmx.de> <1129244001.5057.17.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [Bluez-users] Re: Broadcom chipset and reverse engineering Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 14 Oct 2005 11:27:53 +0000 (UTC) Hi again! Marcel Holtmann holtmann.org> writes: > > since they use H:2 as transport, you should start decoding the USBsnoop > dumps by yourself. And yes it is legal in Germany for interop purpose. > Sorry, but I am new to Bluetooth development. I just searched some information about that 'H:2' transport and found out that this 'H:2' is the USB transport layer which is used for the physical transport of the HCI packets. Is there any program which could decode the HCI data automatically from the USB data or do I have to decode every package by hand (I think there are about 6000 packets [and yes, only my headset was connected; no other Bluetooth devices])? Or perhaps there is an easier way: Is there any free tool that runs under Windows XP (I have to use Windows because the headset only works there), which can dump/log/sniff the HCI packets between the USB host controller and the USB Bluetooth adapter? Regards, Benjamin Eikel ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users