From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: To: bluez-users@lists.sourceforge.net From: Stefan Date: Fri, 2 Jun 2006 14:53:25 +0000 (UTC) Message-ID: Mime-Version: 1.0 Subject: [Bluez-users] PAN over bluetooth - no TCP/IP activity Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Hello, I'm trying to create a PAN between a laptop and a desktop computer. I carefully followed the instructions for creating a PAN network (http://bluez.sourceforge.net/contrib/HOWTO-PAN). Right now I am able to connect, ending up with correct and configured "bnep0" interfaces on both computers. The problem is, that I can not even ping them. After a lot of tries, I figured out, that if I put the bnep0 interface in promiscuous mode, using ifconfig bnep0 promisc (at the NAP side) then ICMP packets starts flowing, and the both nodes are able to ping each other. But that's all. On both nodes hcid & sdpd are running, bnep module is loaded, kernel version is 2.6.16 (Fedora Core 4), bluez-utils 2.15 Here is what I do: @NAP: # pand -s -r NAP @PANU: # pand -Q -r PANU -d NAP @Both (after a while): # ifconfig bnep0 10.0.0.x netmask 255.255.255.0 up @both: # ifconfig bnep0 bnep0 Link encap:Ethernet HWaddr 11:11:11:11:11:11 inet addr:10.0.0.x Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:478 (478.0 b) TX bytes:64 (64.0 b) Accoring to all docs I read, at this poing both nodes should be able to ping each other. But they are not! I don't know how important is, but just in case, here is the output of # hciconfig hci0 -a @Desktop NAP (USB dongle): hci0: Type: USB BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10 UP RUNNING PSCAN ISCAN RX bytes:1076 acl:25 sco:0 events:42 errors:0 TX bytes:657 acl:19 sco:0 commands:17 errors:0 Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: ACCEPT MASTER Name: 'experta' Class: 0x120104 Service Classes: Networking Device Class: Computer, Desktop workstation HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x1fe Manufacturer: Integrated System Solution Corp. (57) @Laptop PANU (IBM/Lenovo Z60m): hci0: Type: USB BD Address: 00:14:A4:DF:2D:C8 ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:133516 acl:2949 sco:0 events:6546 errors:0 TX bytes:108738 acl:3185 sco:0 commands:1594 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'lenovo' Class: 0x120104 Service Classes: Networking Device Class: Computer, Desktop workstation HCI Ver: 2.0 (0x3) HCI Rev: 0x206c LMP Ver: 2.0 (0x3) LMP Subver: 0x4132 Manufacturer: Broadcom Corporation (15) Could you please help me! Regards, Stefan _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users