From: Dick <dm@chello.nl>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] dbus.DBusException: org.bluez.input.Error.AlreadyExists: Input Already exists
Date: Tue, 15 May 2007 18:40:15 +0000 (UTC) [thread overview]
Message-ID: <loom.20070515T203009-183@post.gmane.org> (raw)
In-Reply-To: 1179250065.10069.30.camel@violet
Marcel Holtmann <marcel <at> holtmann.org> writes:
> run "hcidump -X -V" to see what actually happens.
Hi Marcel,
I've tried hcidump but its output doesn't help me ;) As far as I understand the
output it in "Connection pending - Authorization pending" then "Connection
successful" and finally in "Connection refused - PSM not supported" do you know
what this means?
This is the tail of hcidump:
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0221 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0221 flags 0x00 clen 4
MTU 48
> ACL data: handle 12 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 12 flags 0x02 dlen 27
> ACL data: handle 12 flags 0x01 dlen 13
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 28
MTU 48 QoS 0x01 (Best effort)
< ACL data: handle 12 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0221 flags 0x00 result 0 clen 4
Success
MTU 48
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0221 scid 0x0040
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0220 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 4
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 17 scid 0x0042
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0222 scid 0x0042 result 1 status 2
Connection pending - Authorization pending
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 12 mode 0x02 interval 32
Mode: Sniff
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0221 scid 0x0040
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0220 scid 0x0041
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0042 result 2 status 0
Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 12 mode 0x00 interval 0
Mode: Active
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 12 reason 0x13
Reason: Remote User Terminated Connection
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2007-05-15 18:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-13 11:59 [Bluez-users] dbus.DBusException: org.bluez.input.Error.AlreadyExists: Input Already exists Dick
2007-05-14 17:07 ` Marcel Holtmann
2007-05-15 17:12 ` Dick
2007-05-15 17:27 ` Marcel Holtmann
2007-05-15 18:40 ` Dick [this message]
2007-05-16 18:03 ` Dick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20070515T203009-183@post.gmane.org \
--to=dm@chello.nl \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox