From: "zio tom" <zio.tom@gmail.com>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] A blue chamaleon to be
Date: Thu, 15 Dec 2005 10:16:31 +0100 [thread overview]
Message-ID: <op.s1tiptlkxabado@portatilegio> (raw)
In-Reply-To: <1134636788.5198.42.camel@localhost>
In data Thu, 15 Dec 2005 09:53:08 +0100, Marcel Holtmann
<marcel@holtmann.org> ha scritto:
> Hi Giovanni,
> send in the output of "hcidump -X -V" while you are doing this.
Hi Marcel, thank you very much for you asnwering.
Here it is my output
Password:
linux:/home/giovanni # hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.24
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0A:28:0C:D4:EF ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 5 bdaddr 00:0A:28:0C:D4:EF type ACL encrypt 0x00
< ACL data: handle 5 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 5 policy 0x0e
Link policy: HOLD SNIFF PARK
> HCI Event: Max Slots Change (0x1b) plen 3
handle 5 slots 5
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 5
> HCI Event: Max Slots Change (0x1b) plen 3
handle 5 slots 5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 1
> ACL data: handle 5 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 5 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
> ACL data: handle 5 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1506
< ACL data: handle 5 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 2
> ACL data: handle 5 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
Success
MTU 1024
< ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 1
> ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 5 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 18 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 1
> ACL data: handle 5 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 18 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 0
< ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 18 pf 1 ilen 0 fcs 0x32
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:0A:28:0C:D4:EF
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
bdaddr 00:0A:28:0C:D4:EF
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Negative Reply (0x01|0x000c) ncmd 1
status 0x00 bdaddr 00:0A:28:0C:D4:EF
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0A:28:0C:D4:EF
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:0A:28:0C:D4:EF
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:0A:28:0C:D4:EF
> ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 18 pf 1 ilen 0 fcs 0x18
< ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 5 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> ACL data: handle 5 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 5 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 3
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 5 reason 0x13
Reason: Remote User Terminated Connection
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0A:28:0C:D4:EF ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 5 bdaddr 00:0A:28:0C:D4:EF type ACL encrypt 0x00
< ACL data: handle 5 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 5 policy 0x0e
Link policy: HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 5
> HCI Event: Max Slots Change (0x1b) plen 3
handle 5 slots 5
> HCI Event: Max Slots Change (0x1b) plen 3
handle 5 slots 5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 1
> ACL data: handle 5 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 5 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
> ACL data: handle 5 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1506
< ACL data: handle 5 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 2
> ACL data: handle 5 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
Success
MTU 1024
< ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 1
> ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 5 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 18 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 1
> ACL data: handle 5 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 18 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 0
< ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 18 pf 1 ilen 0 fcs 0x32
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:0A:28:0C:D4:EF
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
bdaddr 00:0A:28:0C:D4:EF
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Negative Reply (0x01|0x000c) ncmd 1
status 0x00 bdaddr 00:0A:28:0C:D4:EF
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0A:28:0C:D4:EF
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:0A:28:0C:D4:EF
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:0A:28:0C:D4:EF
> ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 18 pf 1 ilen 0 fcs 0x18
< ACL data: handle 5 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 5 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> ACL data: handle 5 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 5 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 5 packets 3
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 5 reason 0x13
Reason: Remote User Terminated Connection
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-12-15 9:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-15 8:25 [Bluez-users] A blue chamaleon to be zio tom
2005-12-15 8:53 ` Marcel Holtmann
2005-12-15 9:16 ` zio tom [this message]
2005-12-15 9:22 ` Marcel Holtmann
2005-12-15 9:48 ` zio tom
2005-12-15 10:22 ` Marcel Holtmann
2005-12-15 15:50 ` zio tom
2005-12-15 17:29 ` zio tom
2005-12-15 18:03 ` zio tom
2005-12-15 21:17 ` [Bluez-users] " Michael Mauch
2005-12-16 2:41 ` zio tom
2005-12-16 3:19 ` Michael Mauch
2005-12-16 9:21 ` zio tom
2005-12-15 8:56 ` [Bluez-users] " zio tom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=op.s1tiptlkxabado@portatilegio \
--to=zio.tom@gmail.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).