From: "Christoph Torens" <c.torens@web.de>
To: "BlueZ Mailing List" <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] timeout after rfcomm or pan connection
Date: Mon, 15 Mar 2004 13:08:25 +0100 [thread overview]
Message-ID: <opr4wj0bjgeocfdv@debian> (raw)
In-Reply-To: <1078882388.30990.24.camel@pegasus>
Hi again,
it's been a few days since my last mail, hope you remeber some facts from
it.
I managed to get one Acer 500 BT-Dongle with CSR chipset.
I also upgraded to Kernel 2.4.21
this is the latest kernel i can get from the vendor
(this is "arcom" if anyone knows them
the embedded pc is a: "Viper Embedded Linux Development Kit")
and now I have the following situation:
root@viper root# hciconfig -a
hci0: Type: USB
BD Address: 00:60:57:0C:88:1A ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1810 acl:0 sco:0 events:17 errors:0
TX bytes:299 acl:0 sco:0 commands:13 errors:0
Features: 0xff 0xff 0x0b 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0) on viper'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver:
0x175
Manufacturer: Cambridge Silicon Radio (10)
root@viper root# pand --search -Q 20 --service NAP -n
pand[315]: PAN daemon ver 1.1
pand[315]: Inquiring
pand[315]: Searching for NAP on 00:04:3E:C0:9D:79
pand[315]: Connecting to 00:04:3E:C0:9D:79
pand[315]: bnep0 connected
root@viper root# hciconfig -a
hci0: Type: USB
BD Address: 00:60:57:0C:88:1A ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:2380 acl:9 sco:0 events:37 errors:0
TX bytes:495 acl:9 sco:0 commands:19 errors:0
Features: 0xff 0xff 0x0b 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0) on viper'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver:
0x175
Manufacturer: Cambridge Silicon Radio (10)
root@viper root# ifconfig -a
bnep0 Link encap:Ethernet HWaddr 00:60:57:0C:88:1A
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:80:66:10:04:40
inet addr:192.168.0.50 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:312 errors:1 dropped:0 overruns:1 frame:0
TX packets:642 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:37644 (36.7 KiB) TX bytes:316263 (308.8 KiB)
Interrupt:1 Base address:0x9300
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 B) TX bytes:560 (560.0 B)
root@viper root# ifconfig bnep0 10.0.0.2
root@viper root# hciconfig -a
hci0: Type: USB
BD Address: 00:60:57:0C:88:1A ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:2657 acl:9 sco:0 events:40 errors:0
TX bytes:564 acl:12 sco:0 commands:22 errors:0
Features: 0xff 0xff 0x0b 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Can't read local name on hci0. Connection timed out(110)
root@viper root#
###
as you can see... I get the bnep connection and the interface bnep0.
i try to set an ip adress and ...the hci device crashes.
any ideas?
ifconfig works on the other side at my debian-PC.
i have binary packages of bluez-libs provided by arcom
bluez-pan is not provided by arcom, so i had to cross-compile bluez-libs,
bluez-sdp and finally bluez-pan
by the way, this is my student project (german: Studienarbeit)
--
Regards,
Christoph Torens
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-03-15 12:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-09 15:43 [Bluez-users] timeout after rfcomm or pan connection Christoph Torens
2004-03-09 16:17 ` Lalith Chakravarthi
2004-03-10 1:12 ` Christoph Torens
2004-03-10 1:33 ` Marcel Holtmann
2004-03-15 12:08 ` Christoph Torens [this message]
2004-03-15 13:45 ` Marcel Holtmann
2004-03-16 23:54 ` Christoph Torens
2004-03-17 0:19 ` Marcel Holtmann
2004-03-10 0:09 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=opr4wj0bjgeocfdv@debian \
--to=c.torens@web.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).