~ # uname -a
Linux dfavro-3 2.6.9-1.11_FC2 #1 Sun Jan 2 15:49:30 EST 2005 i686 athlon i386 GNU/Linux


RELEVANT PORTION OF DMESG LOG:
==============================
Yenta: CardBus bridge found at 0000:00:0a.0 [161f:2029]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x01001c00, devctl 0x64
Yenta: ISA IRQ mask 0x00f8, PCI irq 10
Socket status: 30000010
cs: warning: no high memory space available!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
ttyS16 at I/O 0x100 (irq = 3) is a 16C950/954
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.4
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized


~ # hciconfig -a
~ #


~ # cat /var/lib/pcmcia/stab
Socket 0: Serial or Modem
0       serial  serial_cs       0       ttyS16  4       80


~ # dump_cis
Socket 0:
  dev_info
    NULL 0ns, 512b
  manfid 0x0279, 0x950b
  funcid serial_port [post]
  serial_interface
    uart 16550 [space/mark/odd/even] [5/6/7/8] [1/1.5/2]
  vers_1 7.1, "PCMCIA", "Bluetooth Card", "", ""
  config base 0x00f8 mask 0x000f last_index 0x04
  cftable_entry 0x01 [default]
    [rdybsy]
    Vcc Vnom 3300mV
    io 0x03f8-0x0407 [lines=8] [8bit] [range]
    irq mask 0xffff [level] [shared]
  cftable_entry 0x02
    io 0x0000-0x7fff [lines=15] [8bit]


~ # cardctl config
Socket 0:
  Vcc 3.3V  Vpp1 0.0V  Vpp2 0.0V
  interface type is "memory and I/O"
  irq 3 [exclusive] [level]
  speaker output is enabled
  function 0:
    config base 0x00f8
      option 0x42 status 0x08 pin 0x00 copy 0x00
    io 0x0100-0x010f [8bit]


~ # cardctl status
Socket 0:
  3.3V 16-bit PC Card
  function 0: [ready], [bat dead], [bat low]


~ # cardctl ident
Socket 0:
  product info: "PCMCIA", "Bluetooth Card", "", ""
  manfid: 0x0279, 0x950b
  function: 2 (serial)