Linux bluetooth development
 help / color / mirror / Atom feed
From: Cen Zhang <zzzccc427@gmail.com>
To: marcel@holtmann.org, luiz.dentz@gmail.com
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
	baijiaju1990@gmail.com, jjzuming@gmail.com, zzzccc427@gmail.com
Subject: [PATCH v4 2/4] Bluetooth: SMP: Serialize forced BR/EDR channel changes
Date: Wed, 18 Nov 2026 12:21:36 +0800	[thread overview]
Message-ID: <pm-bluetooth-objects-candidate-0184-v11-900043ed2303656c76fe-2@gmail.com> (raw)
In-Reply-To: <pm-bluetooth-objects-candidate-0184-v11-900043ed2303656c76fe-0@gmail.com>

  Debugfs disable                    Power-off
  load smp_bredr_data
                                     clear the same slot
                                     release the channel
  release the saved channel again

Take hdev->lock around the debugfs writer to serialize slot changes with
power-off. When HCI_UP is clear, change only the force flag and let the
next power-on register the root. Otherwise enabling the flag can leave a
listening channel that an already-down close never removes. Skip
deletion when power-off already cleared the slot.

The following registration change uses the same mutex to serialize this
writer with power-on too. The preceding publication change protects
lookups from another controller with the same address.

Oops report as below:

    Oops: general protection fault, probably for non-canonical address
    0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
    KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
    Workqueue: hci1 hci_rx_work
    RIP: 0010:l2cap_new_connection+0x16c/0x320
    Call Trace:
     <TASK>
     l2cap_connect_cfm+0x46c/0xe60
     hci_remote_ext_features_evt+0x67d/0xbd0
     hci_event_packet+0x894/0xc70
     hci_rx_work+0x367/0xf00
     process_one_work+0x908/0x19c0
     worker_thread+0x65c/0xe40
     kthread+0x34f/0x460
     ret_from_fork+0x659/0x940
     ret_from_fork_asm+0x1a/0x30
     </TASK>

KASAN report as below:

    ==================================================================
    BUG: KASAN: slab-use-after-free in smp_del_chan+0xd2/0xe0
    Read of size 8 at addr ffff888112a2e4a0 by task sh/493

    Call Trace:
     <TASK>
     dump_stack_lvl+0x93/0xd0
     print_report+0xce/0x630
     kasan_report+0xe0/0x110
     smp_del_chan+0xd2/0xe0
     smp_force_bredr+0xda/0x200
     force_bredr_smp_write+0xc9/0x130
     full_proxy_write+0x11f/0x180
     vfs_write+0x25a/0x1010
     ksys_write+0x111/0x200
     do_syscall_64+0x115/0x6a0
     entry_SYSCALL_64_after_hwframe+0x77/0x7f
     </TASK>

    Allocated by task 493:
     kasan_save_stack+0x33/0x60
     kasan_save_track+0x14/0x30
     __kasan_kmalloc+0xaa/0xb0
     __kmalloc_cache_noprof+0x251/0x610
     l2cap_chan_create+0x47/0x930
     smp_add_cid+0x309/0x4f0
     smp_force_bredr+0x17d/0x200
     force_bredr_smp_write+0xc9/0x130
     full_proxy_write+0x11f/0x180
     vfs_write+0x25a/0x1010
     ksys_write+0x111/0x200
     do_syscall_64+0x115/0x6a0
     entry_SYSCALL_64_after_hwframe+0x77/0x7f

    Freed by task 496:
     kasan_save_stack+0x33/0x60
     kasan_save_track+0x14/0x30
     kasan_save_free_info+0x3b/0x60
     __kasan_slab_free+0x5f/0x80
     kfree+0x307/0x580
     l2cap_chan_put+0x273/0x3a0
     smp_unregister+0x59/0xe0
     hci_dev_close_sync+0x4c9/0x1150
     hci_set_powered_sync+0x4a7/0x680
     set_powered_sync+0xaa/0x150
     hci_cmd_sync_work+0x1b3/0x450
     process_one_work+0x908/0x19c0
     worker_thread+0x65c/0xe40
     kthread+0x34f/0x460
     ret_from_fork+0x659/0x940
     ret_from_fork_asm+0x1a/0x30

    The buggy address belongs to the object at ffff888112a2e000
     which belongs to the cache kmalloc-2k of size 2048
    The buggy address is located 1184 bytes inside of
     freed 2048-byte region [ffff888112a2e000, ffff888112a2e800)
    ==================================================================

Fixes: 300acfdec916 ("Bluetooth: Introduce force_bredr_smp debugfs option for testing")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
---
Assisted-by: LLM

 net/bluetooth/hci_debugfs.c | 2 ++
 net/bluetooth/smp.c         | 7 ++++++-
 net/bluetooth/smp.h         | 3 ++-
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/hci_debugfs.c b/net/bluetooth/hci_debugfs.c
index cd5ef398f2382..f513731053d28 100644
--- a/net/bluetooth/hci_debugfs.c
+++ b/net/bluetooth/hci_debugfs.c
@@ -525,7 +525,9 @@ static ssize_t force_bredr_smp_write(struct file *file,
 	if (err)
 		return err;
 
+	hci_dev_lock(hdev);
 	err = smp_force_bredr(hdev, enable);
+	hci_dev_unlock(hdev);
 	if (err)
 		return err;
 
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 948a847c0dc23..e605ee8d20586 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -3433,6 +3433,10 @@ int smp_force_bredr(struct hci_dev *hdev, bool enable)
 	if (enable == hci_dev_test_flag(hdev, HCI_FORCE_BREDR_SMP))
 		return -EALREADY;
 
+	/* A powered-off controller has no registered SMP roots. */
+	if (!test_bit(HCI_UP, &hdev->flags))
+		goto done;
+
 	if (enable) {
 		struct l2cap_chan *chan;
 
@@ -3441,7 +3445,7 @@ int smp_force_bredr(struct hci_dev *hdev, bool enable)
 			return PTR_ERR(chan);
 
 		hdev->smp_bredr_data = chan;
-	} else {
+	} else if (hdev->smp_bredr_data) {
 		struct l2cap_chan *chan;
 
 		chan = hdev->smp_bredr_data;
@@ -3449,6 +3453,7 @@ int smp_force_bredr(struct hci_dev *hdev, bool enable)
 		smp_del_chan(chan);
 	}
 
+done:
 	hci_dev_change_flag(hdev, HCI_FORCE_BREDR_SMP);
 
 	return 0;
diff --git a/net/bluetooth/smp.h b/net/bluetooth/smp.h
index 0537762e2775e..22eabda930ef4 100644
--- a/net/bluetooth/smp.h
+++ b/net/bluetooth/smp.h
@@ -195,7 +195,8 @@ bool smp_irk_matches(struct hci_dev *hdev, const u8 irk[16],
 int smp_generate_rpa(struct hci_dev *hdev, const u8 irk[16], bdaddr_t *rpa);
 int smp_generate_oob(struct hci_dev *hdev, u8 hash[16], u8 rand[16]);
 
-int smp_force_bredr(struct hci_dev *hdev, bool enable);
+int smp_force_bredr(struct hci_dev *hdev, bool enable)
+	__must_hold(&hdev->lock);
 
 int smp_register(struct hci_dev *hdev);
 void smp_unregister(struct hci_dev *hdev);

  parent reply	other threads:[~2026-11-18  4:22 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18  4:21 [PATCH v4 0/4] Bluetooth: SMP: Serialize root channel updates Cen Zhang
2026-11-18  4:21 ` [PATCH v4 1/4] Bluetooth: SMP: Publish root channels after initialization Cen Zhang
2026-11-18  4:21 ` Cen Zhang [this message]
2026-11-18  4:21 ` [PATCH v4 3/4] Bluetooth: hci_core: Hold the request lock for the power-on update Cen Zhang
2026-11-18  4:21 ` [PATCH v4 4/4] Bluetooth: SMP: Serialize root channel replacement Cen Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=pm-bluetooth-objects-candidate-0184-v11-900043ed2303656c76fe-2@gmail.com \
    --to=zzzccc427@gmail.com \
    --cc=baijiaju1990@gmail.com \
    --cc=jjzuming@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox