* [PATCH v3 2/2] btrfs-progs: limit the min value of total_bytes
@ 2012-10-08 9:31 Robin Dong
0 siblings, 0 replies; 3+ messages in thread
From: Robin Dong @ 2012-10-08 9:31 UTC (permalink / raw)
To: linux-btrfs; +Cc: Robin Dong
From: Robin Dong <sanbai@taobao.com>
Using mkfs.btrfs like:
mkfs.btrfs -b 1048576 /dev/sda
will report error:
mkfs.btrfs: volumes.c:796: btrfs_alloc_chunk: Assertion `!(ret)' failed.
Aborted
because the length of dev_extent is 4MB.
For the single/single case it's 5MB but
for the dup/dup it's 156MB. It's due to the known bug in the blockgroup
creation with multiple devices (applies on dup as well here) that leads to:
# btrfs fi df .
System, DUP: total=8.00MB, used=4.00KB
System: total=4.00MB, used=0.00
Data+Metadata, DUP: total=64.00MB, used=24.00KB
Data+Metadata: total=8.00MB, used=0.00
8*2 + 4 + 64*2 + 8 = 156
Signed-off-by: Robin Dong <sanbai@taobao.com>
Reviewed-by: David Sterba <dave@jikos.cz>
---
mkfs.c | 7 ++++++-
utils.h | 1 +
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/mkfs.c b/mkfs.c
index 93672b9..982a113 100644
--- a/mkfs.c
+++ b/mkfs.c
@@ -1345,7 +1345,12 @@ int main(int ac, char **av)
&dev_block_count, &mixed, nodiscard);
if (block_count == 0)
block_count = dev_block_count;
- else if (block_count > dev_block_count) {
+ else if (block_count < BTRFS_MKFS_SYSTEM_MAX_SIZE) {
+ fprintf(stderr, "Illegal total number of bytes %u "
+ "(smaller than %u)\n",
+ block_count, BTRFS_MKFS_SYSTEM_MAX_SIZE);
+ exit(1);
+ } else if (block_count > dev_block_count) {
fprintf(stderr, "%s is smaller than requested size\n", file);
exit(1);
}
diff --git a/utils.h b/utils.h
index c147c12..b63f69a 100644
--- a/utils.h
+++ b/utils.h
@@ -20,6 +20,7 @@
#define __UTILS__
#define BTRFS_MKFS_SYSTEM_GROUP_SIZE (4 * 1024 * 1024)
+#define BTRFS_MKFS_SYSTEM_MAX_SIZE (156 * 1024 * 1024)
int make_btrfs(int fd, const char *device, const char *label,
u64 blocks[6], u64 num_bytes, u32 nodesize,
--
1.7.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 1/2] btrfs-progs: limit the max value of leafsize and nodesize
@ 2012-10-10 1:52 Robin Dong
2012-10-10 1:52 ` [PATCH v3 2/2] btrfs-progs: limit the min value of total_bytes Robin Dong
0 siblings, 1 reply; 3+ messages in thread
From: Robin Dong @ 2012-10-10 1:52 UTC (permalink / raw)
To: linux-btrfs; +Cc: Robin Dong
From: Robin Dong <sanbai@taobao.com>
Using mkfs.btrfs like:
mkfs.btrfs -l 131072 /dev/sda
will return no error, but after mount it, the dmesg will report:
BTRFS: couldn't mount because metadata blocksize (131072) was too large
The leafsize and nodesize are equal at present, so we just use one function
"check_leaf_or_node_size" to limit leaf and node size below BTRFS_MAX_METADATA_BLOCKSIZE.
Signed-off-by: Robin Dong <sanbai@taobao.com>
---
v2 <- v1:
- add function check_leaf_or_node_size to limit leafsize and nodesize.
v3 <- v2:
- add quota string "sectorsize".
ctree.h | 6 ++++++
mkfs.c | 29 +++++++++++++++++++++++------
2 files changed, 29 insertions(+), 6 deletions(-)
diff --git a/ctree.h b/ctree.h
index 7f55229..75c1e0a 100644
--- a/ctree.h
+++ b/ctree.h
@@ -111,6 +111,12 @@ struct btrfs_trans_handle;
#define BTRFS_DEV_ITEMS_OBJECTID 1ULL
/*
+ * the max metadata block size. This limit is somewhat artificial,
+ * but the memmove costs go through the roof for larger blocks.
+ */
+#define BTRFS_MAX_METADATA_BLOCKSIZE 65536
+
+/*
* we can actually store much bigger names, but lets not confuse the rest
* of linux
*/
diff --git a/mkfs.c b/mkfs.c
index dff5eb8..93672b9 100644
--- a/mkfs.c
+++ b/mkfs.c
@@ -1201,6 +1201,27 @@ static int zero_output_file(int out_fd, u64 size, u32 sectorsize)
return ret;
}
+static int check_leaf_or_node_size(u32 size, u32 sectorsize)
+{
+ if (size < sectorsize) {
+ fprintf(stderr,
+ "Illegal leafsize (or nodesize) %u (smaller than sectorsize %u)\n",
+ size, sectorsize);
+ return -1;
+ } else if (size > BTRFS_MAX_METADATA_BLOCKSIZE) {
+ fprintf(stderr,
+ "Illegal leafsize (or nodesize) %u (larger than %u)\n",
+ size, BTRFS_MAX_METADATA_BLOCKSIZE);
+ return -1;
+ } else if (size & (sectorsize - 1)) {
+ fprintf(stderr,
+ "Illegal leafsize (or nodesize) %u (not aligned to %u)\n",
+ size, sectorsize);
+ return -1;
+ }
+ return 0;
+}
+
int main(int ac, char **av)
{
char *file;
@@ -1291,14 +1312,10 @@ int main(int ac, char **av)
}
}
sectorsize = max(sectorsize, (u32)getpagesize());
- if (leafsize < sectorsize || (leafsize & (sectorsize - 1))) {
- fprintf(stderr, "Illegal leafsize %u\n", leafsize);
+ if (check_leaf_or_node_size(leafsize, sectorsize))
exit(1);
- }
- if (nodesize < sectorsize || (nodesize & (sectorsize - 1))) {
- fprintf(stderr, "Illegal nodesize %u\n", nodesize);
+ if (check_leaf_or_node_size(nodesize, sectorsize))
exit(1);
- }
ac = ac - optind;
if (ac == 0)
print_usage();
--
1.7.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 2/2] btrfs-progs: limit the min value of total_bytes
2012-10-10 1:52 [PATCH v3 1/2] btrfs-progs: limit the max value of leafsize and nodesize Robin Dong
@ 2012-10-10 1:52 ` Robin Dong
0 siblings, 0 replies; 3+ messages in thread
From: Robin Dong @ 2012-10-10 1:52 UTC (permalink / raw)
To: linux-btrfs; +Cc: Robin Dong
From: Robin Dong <sanbai@taobao.com>
Using mkfs.btrfs like:
mkfs.btrfs -b 1048576 /dev/sda
will report error:
mkfs.btrfs: volumes.c:796: btrfs_alloc_chunk: Assertion `!(ret)' failed.
Aborted
because the length of dev_extent is 4MB.
For the single/single case it's 5MB but
for the dup/dup it's 156MB. It's due to the known bug in the blockgroup
creation with multiple devices (applies on dup as well here) that leads to:
# btrfs fi df .
System, DUP: total=8.00MB, used=4.00KB
System: total=4.00MB, used=0.00
Data+Metadata, DUP: total=64.00MB, used=24.00KB
Data+Metadata: total=8.00MB, used=0.00
8*2 + 4 + 64*2 + 8 = 156
Signed-off-by: Robin Dong <sanbai@taobao.com>
---
v3 <- v2:
- change the max value of total_bytes to 156MB.
mkfs.c | 7 ++++++-
utils.h | 1 +
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/mkfs.c b/mkfs.c
index 93672b9..982a113 100644
--- a/mkfs.c
+++ b/mkfs.c
@@ -1345,7 +1345,12 @@ int main(int ac, char **av)
&dev_block_count, &mixed, nodiscard);
if (block_count == 0)
block_count = dev_block_count;
- else if (block_count > dev_block_count) {
+ else if (block_count < BTRFS_MKFS_SYSTEM_MAX_SIZE) {
+ fprintf(stderr, "Illegal total number of bytes %u "
+ "(smaller than %u)\n",
+ block_count, BTRFS_MKFS_SYSTEM_MAX_SIZE);
+ exit(1);
+ } else if (block_count > dev_block_count) {
fprintf(stderr, "%s is smaller than requested size\n", file);
exit(1);
}
diff --git a/utils.h b/utils.h
index c147c12..b63f69a 100644
--- a/utils.h
+++ b/utils.h
@@ -20,6 +20,7 @@
#define __UTILS__
#define BTRFS_MKFS_SYSTEM_GROUP_SIZE (4 * 1024 * 1024)
+#define BTRFS_MKFS_SYSTEM_MAX_SIZE (156 * 1024 * 1024)
int make_btrfs(int fd, const char *device, const char *label,
u64 blocks[6], u64 num_bytes, u32 nodesize,
--
1.7.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 1/2] btrfs-progs: limit the max value of leafsize and nodesize
@ 2012-10-08 8:10 Robin Dong
2012-10-08 8:10 ` [PATCH v3 2/2] btrfs-progs: limit the min value of total_bytes Robin Dong
0 siblings, 1 reply; 3+ messages in thread
From: Robin Dong @ 2012-10-08 8:10 UTC (permalink / raw)
To: linux-btrfs; +Cc: Robin Dong
From: Robin Dong <sanbai@taobao.com>
Using mkfs.btrfs like:
mkfs.btrfs -l 131072 /dev/sda
will return no error, but after mount it, the dmesg will report:
BTRFS: couldn't mount because metadata blocksize (131072) was too large
The leafsize and nodesize are equal at present, so we just use one function
"check_leaf_or_node_size" to limit leaf and node size below BTRFS_MAX_METADATA_BLOCKSIZE.
Signed-off-by: Robin Dong <sanbai@taobao.com>
Reviewed-by: David Sterba <dave@jikos.cz>
---
ctree.h | 6 ++++++
mkfs.c | 29 +++++++++++++++++++++++------
2 files changed, 29 insertions(+), 6 deletions(-)
diff --git a/ctree.h b/ctree.h
index 7f55229..75c1e0a 100644
--- a/ctree.h
+++ b/ctree.h
@@ -111,6 +111,12 @@ struct btrfs_trans_handle;
#define BTRFS_DEV_ITEMS_OBJECTID 1ULL
/*
+ * the max metadata block size. This limit is somewhat artificial,
+ * but the memmove costs go through the roof for larger blocks.
+ */
+#define BTRFS_MAX_METADATA_BLOCKSIZE 65536
+
+/*
* we can actually store much bigger names, but lets not confuse the rest
* of linux
*/
diff --git a/mkfs.c b/mkfs.c
index dff5eb8..93672b9 100644
--- a/mkfs.c
+++ b/mkfs.c
@@ -1201,6 +1201,27 @@ static int zero_output_file(int out_fd, u64 size, u32 sectorsize)
return ret;
}
+static int check_leaf_or_node_size(u32 size, u32 sectorsize)
+{
+ if (size < sectorsize) {
+ fprintf(stderr,
+ "Illegal leafsize (or nodesize) %u (smaller than sectorsize %u)\n",
+ size, sectorsize);
+ return -1;
+ } else if (size > BTRFS_MAX_METADATA_BLOCKSIZE) {
+ fprintf(stderr,
+ "Illegal leafsize (or nodesize) %u (larger than %u)\n",
+ size, BTRFS_MAX_METADATA_BLOCKSIZE);
+ return -1;
+ } else if (size & (sectorsize - 1)) {
+ fprintf(stderr,
+ "Illegal leafsize (or nodesize) %u (not aligned to %u)\n",
+ size, sectorsize);
+ return -1;
+ }
+ return 0;
+}
+
int main(int ac, char **av)
{
char *file;
@@ -1291,14 +1312,10 @@ int main(int ac, char **av)
}
}
sectorsize = max(sectorsize, (u32)getpagesize());
- if (leafsize < sectorsize || (leafsize & (sectorsize - 1))) {
- fprintf(stderr, "Illegal leafsize %u\n", leafsize);
+ if (check_leaf_or_node_size(leafsize, sectorsize))
exit(1);
- }
- if (nodesize < sectorsize || (nodesize & (sectorsize - 1))) {
- fprintf(stderr, "Illegal nodesize %u\n", nodesize);
+ if (check_leaf_or_node_size(nodesize, sectorsize))
exit(1);
- }
ac = ac - optind;
if (ac == 0)
print_usage();
--
1.7.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 2/2] btrfs-progs: limit the min value of total_bytes
2012-10-08 8:10 [PATCH v3 1/2] btrfs-progs: limit the max value of leafsize and nodesize Robin Dong
@ 2012-10-08 8:10 ` Robin Dong
0 siblings, 0 replies; 3+ messages in thread
From: Robin Dong @ 2012-10-08 8:10 UTC (permalink / raw)
To: linux-btrfs; +Cc: Robin Dong
From: Robin Dong <sanbai@taobao.com>
Using mkfs.btrfs like:
mkfs.btrfs -b 1048576 /dev/sda
will report error:
mkfs.btrfs: volumes.c:796: btrfs_alloc_chunk: Assertion `!(ret)' failed.
Aborted
because the length of dev_extent is 4MB.
For the single/single case it's 5MB but
for the dup/dup it's 156MB. It's due to the known bug in the blockgroup
creation with multiple devices (applies on dup as well here) that leads to:
# btrfs fi df .
System, DUP: total=8.00MB, used=4.00KB
System: total=4.00MB, used=0.00
Data+Metadata, DUP: total=64.00MB, used=24.00KB
Data+Metadata: total=8.00MB, used=0.00
8*2 + 4 + 64*2 + 8 = 156
Signed-off-by: Robin Dong <sanbai@taobao.com>
Reviewed-by: David Sterba <dave@jikos.cz>
---
mkfs.c | 7 ++++++-
utils.h | 1 +
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/mkfs.c b/mkfs.c
index 93672b9..982a113 100644
--- a/mkfs.c
+++ b/mkfs.c
@@ -1345,7 +1345,12 @@ int main(int ac, char **av)
&dev_block_count, &mixed, nodiscard);
if (block_count == 0)
block_count = dev_block_count;
- else if (block_count > dev_block_count) {
+ else if (block_count < BTRFS_MKFS_SYSTEM_MAX_SIZE) {
+ fprintf(stderr, "Illegal total number of bytes %u "
+ "(smaller than %u)\n",
+ block_count, BTRFS_MKFS_SYSTEM_MAX_SIZE);
+ exit(1);
+ } else if (block_count > dev_block_count) {
fprintf(stderr, "%s is smaller than requested size\n", file);
exit(1);
}
diff --git a/utils.h b/utils.h
index c147c12..b63f69a 100644
--- a/utils.h
+++ b/utils.h
@@ -20,6 +20,7 @@
#define __UTILS__
#define BTRFS_MKFS_SYSTEM_GROUP_SIZE (4 * 1024 * 1024)
+#define BTRFS_MKFS_SYSTEM_MAX_SIZE (156 * 1024 * 1024)
int make_btrfs(int fd, const char *device, const char *label,
u64 blocks[6], u64 num_bytes, u32 nodesize,
--
1.7.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-10-10 1:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-08 9:31 [PATCH v3 2/2] btrfs-progs: limit the min value of total_bytes Robin Dong
-- strict thread matches above, loose matches on Subject: below --
2012-10-10 1:52 [PATCH v3 1/2] btrfs-progs: limit the max value of leafsize and nodesize Robin Dong
2012-10-10 1:52 ` [PATCH v3 2/2] btrfs-progs: limit the min value of total_bytes Robin Dong
2012-10-08 8:10 [PATCH v3 1/2] btrfs-progs: limit the max value of leafsize and nodesize Robin Dong
2012-10-08 8:10 ` [PATCH v3 2/2] btrfs-progs: limit the min value of total_bytes Robin Dong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).