From: Jan Schmidt <list.xfs@jan-o-sch.net>
To: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org, sbehrens@giantdisaster.de
Subject: [PATCH v2 2/2] xfstests btrfs/316: test send / receive
Date: Wed, 24 Jul 2013 17:07:29 +0200 [thread overview]
Message-ID: <1374678449-21780-3-git-send-email-list.xfs@jan-o-sch.net> (raw)
In-Reply-To: <1374678449-21780-1-git-send-email-list.xfs@jan-o-sch.net>
Basic send / receive functionality test for btrfs. Requires current
version of fsstress built (-x support). Relies on fssum tool but can
skip the test if it failed to build.
Signed-off-by: Jan Schmidt <list.xfs@jan-o-sch.net>
---
README | 3 +
tests/btrfs/316 | 113 +++++++++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/316.out | 4 ++
tests/btrfs/group | 1 +
4 files changed, 121 insertions(+), 0 deletions(-)
create mode 100755 tests/btrfs/316
create mode 100644 tests/btrfs/316.out
diff --git a/README b/README
index a49ca7c..d287f63 100644
--- a/README
+++ b/README
@@ -26,6 +26,9 @@ Preparing system for tests (IRIX and Linux):
http://www.extra.research.philips.com/udf/, then copy the udf_test
binary to xfstests/src/. If you wish to disable UDF verification test
set the environment variable DISABLE_UDF_TEST to 1.
+ - If you wish to run the btrfs send / receive components of the suite
+ install fssum from
+ git://git.kernel.org/pub/scm/linux/kernel/git/arne/far-progs.git
- create one or two partitions to use for testing
diff --git a/tests/btrfs/316 b/tests/btrfs/316
new file mode 100755
index 0000000..2e86428
--- /dev/null
+++ b/tests/btrfs/316
@@ -0,0 +1,113 @@
+#! /bin/bash
+# FSQA Test No. 314
+#
+# Run fsstress to create a reasonably strange file system, make a
+# snapshot (base) and run more fsstress. Then take another snapshot
+# (incr) and send both snapshots to a temp file. Remake the file
+# system and receive from the files. Check both states with fssum.
+#
+#-----------------------------------------------------------------------
+# Copyright (C) 2013 STRATO. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#-----------------------------------------------------------------------
+#
+# creator
+owner=list.btrfs@jan-o-sch.net
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=`mktemp -d`
+status=1
+
+_cleanup()
+{
+ echo "*** unmount"
+ umount $SCRATCH_MNT 2>/dev/null
+ rm -f $tmp.*
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_need_to_be_root
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_require_command $FSSUM_PROG fssum
+
+rm -f $seqres.full
+
+workout()
+{
+ fsz=$1
+ ops=$2
+
+ umount $SCRATCH_DEV >/dev/null 2>&1
+ echo "*** mkfs -dsize=$fsz" >>$seqres.full
+ echo "" >>$seqres.full
+ _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
+ || _fail "size=$fsz mkfs failed"
+ run_check _scratch_mount "-o noatime"
+
+ run_check $FSSTRESS_PROG -d $SCRATCH_MNT -n $ops $FSSTRESS_AVOID -x \
+ "$BTRFS_UTIL_PROG subvol snap -r $SCRATCH_MNT $SCRATCH_MNT/base"
+
+ run_check $BTRFS_UTIL_PROG subvol snap -r $SCRATCH_MNT $SCRATCH_MNT/incr
+
+ echo "# $BTRFS_UTIL_PROG send $SCRATCH_MNT/base > $tmp/base.snap" \
+ >> $seqres.full
+ $BTRFS_UTIL_PROG send $SCRATCH_MNT/base > $tmp/base.snap 2>> $seqres.full \
+ || _fail "failed: '$@'"
+ echo "# $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base\
+ $SCRATCH_MNT/incr > $tmp/incr.snap" >> $seqres.full
+ $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base \
+ $SCRATCH_MNT/incr > $tmp/incr.snap 2>> $seqres.full \
+ || _fail "failed: '$@'"
+
+ run_check $FSSUM_PROG -A -f -w $tmp/base.fssum $SCRATCH_MNT/base
+ run_check $FSSUM_PROG -A -f -w $tmp/incr.fssum -x $SCRATCH_MNT/incr/base \
+ $SCRATCH_MNT/incr
+
+ umount $SCRATCH_DEV >/dev/null 2>&1
+ echo "*** mkfs -dsize=$fsz" >>$seqres.full
+ echo "" >>$seqres.full
+ _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
+ || _fail "size=$fsz mkfs failed"
+ run_check _scratch_mount "-o noatime"
+
+ run_check $BTRFS_UTIL_PROG receive $SCRATCH_MNT < $tmp/base.snap
+ run_check $FSSUM_PROG -r $tmp/base.fssum $SCRATCH_MNT/base
+
+ run_check $BTRFS_UTIL_PROG receive $SCRATCH_MNT < $tmp/incr.snap
+ run_check $FSSUM_PROG -r $tmp/incr.fssum $SCRATCH_MNT/incr
+}
+
+echo "*** test send / receive"
+
+fssize=`expr 2000 \* 1024 \* 1024`
+ops=200
+
+workout $fssize $ops
+
+echo "*** done"
+status=0
+exit
diff --git a/tests/btrfs/316.out b/tests/btrfs/316.out
new file mode 100644
index 0000000..4564c85
--- /dev/null
+++ b/tests/btrfs/316.out
@@ -0,0 +1,4 @@
+QA output created by 316
+*** test send / receive
+*** done
+*** unmount
diff --git a/tests/btrfs/group b/tests/btrfs/group
index bc6c256..11d708a 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -9,3 +9,4 @@
276 auto rw metadata
284 auto
307 auto quick
+316 auto rw metadata
--
1.7.2.5
next prev parent reply other threads:[~2013-07-24 15:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-24 15:07 [PATCH v2 0/2] xfstest btrfs/316: test send / receive (was: btrfs/314) Jan Schmidt
2013-07-24 15:07 ` [PATCH v2 1/2] xfstests: add fssum tool Jan Schmidt
2013-08-06 20:42 ` Josef Bacik
2013-07-24 15:07 ` Jan Schmidt [this message]
2013-08-06 20:43 ` [PATCH v2 2/2] xfstests btrfs/316: test send / receive Josef Bacik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374678449-21780-3-git-send-email-list.xfs@jan-o-sch.net \
--to=list.xfs@jan-o-sch.net \
--cc=linux-btrfs@vger.kernel.org \
--cc=sbehrens@giantdisaster.de \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).