From: Josef Bacik <jbacik@fusionio.com>
To: <xfs@oss.sgi.com>, <linux-btrfs@vger.kernel.org>
Subject: [PATCH] xfstests: generic/311: add a few more test cases
Date: Wed, 11 Sep 2013 15:47:27 -0400 [thread overview]
Message-ID: <1378928847-2349-1-git-send-email-jbacik@fusionio.com> (raw)
Btrfs had some issues with fsync()'ing directories and fsync()'ing after
renames. These three new tests cover the 3 different issues we were seeing.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
---
tests/generic/311 | 89 +++++++++++++++++++++++++++++++++++++++++++++++-
tests/generic/311.out | 8 ++++
2 files changed, 95 insertions(+), 2 deletions(-)
diff --git a/tests/generic/311 b/tests/generic/311
index 675d927..002ad57 100644
--- a/tests/generic/311
+++ b/tests/generic/311
@@ -70,6 +70,8 @@ testfile=$SCRATCH_MNT/$seq.fsync
FLAKEY_TABLE="0 $BLK_DEV_SIZE flakey $SCRATCH_DEV 0 180 0"
FLAKEY_TABLE_DROP="0 $BLK_DEV_SIZE flakey $SCRATCH_DEV 0 0 180 1 drop_writes"
_TEST_OPTIONS=""
+allow_writes=0
+drop_writes=1
_mount_flakey()
{
@@ -104,8 +106,6 @@ _load_flakey_table()
_run_test()
{
# _run_test <testnum> <0 - buffered | 1 - O_DIRECT>
- allow_writes=0
- drop_writes=1
test_num=$1
direct_opt=""
@@ -131,6 +131,83 @@ _run_test()
_mount_flakey
}
+_clean_working_dir()
+{
+ _mount_flakey
+ rm -rf $SCRATCH_MNT/*
+ _unmount_flakey
+}
+
+# Btrfs wasn't making sure the directory survived fsync
+_directory_test()
+{
+ echo "fsync new directory"
+ _mount_flakey
+ mkdir $SCRATCH_MNT/bar
+ $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
+ _load_flakey_table $drop_writes
+ _unmount_flakey
+
+ _load_flakey_table $allow_writes
+ _mount_flakey
+ _ls_l $SCRATCH_MNT | tail -n +2 | awk '{ print $1, $9 }'
+ _unmount_flakey
+ _check_scratch_fs $FLAKEY_DEV
+ [ $? -ne 0 ] && _fatal "fsck failed"
+}
+
+# Btrfs was losing a rename into a new directory
+_rename_test()
+{
+ echo "rename fsync test"
+ _mount_flakey
+ touch $SCRATCH_MNT/foo
+ mkdir $SCRATCH_MNT/bar
+ $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
+ mv $SCRATCH_MNT/foo $SCRATCH_MNT/bar/foo
+ $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
+ $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar/foo
+ _load_flakey_table $drop_writes
+ _unmount_flakey
+
+ _load_flakey_table $allow_writes
+ _mount_flakey
+ _ls_l $SCRATCH_MNT | tail -n +2 | awk '{ print $1, $9 }'
+ _ls_l $SCRATCH_MNT/bar | tail -n +2 | awk '{ print $1, $9 }'
+ _unmount_flakey
+ _check_scratch_fs $FLAKEY_DEV
+ [ $? -ne 0 ] && _fatal "fsck failed"
+}
+
+# Btrfs was failing to replay a log when we had a inode with a smaller inode
+# number that is renamed into a directory with a higher inode number
+_replay_rename_test()
+{
+ echo "replay rename fsync test"
+ _mount_flakey
+ touch $SCRATCH_MNT/foo
+ mkdir $SCRATCH_MNT/bar
+ $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
+ mv $SCRATCH_MNT/foo $SCRATCH_MNT/bar/foo
+ $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
+
+ # This is to force btrfs to relog the entire inode including the ref so
+ # we are sure to try and replay the ref along with the dir_index item
+ setfattr -n user.foo -v blah $SCRATCH_MNT/bar/foo >> $seqres.full 2>&1
+
+ $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar/foo
+ _load_flakey_table $drop_writes
+ _unmount_flakey
+
+ _load_flakey_table $allow_writes
+ _mount_flakey
+ _ls_l $SCRATCH_MNT | tail -n +2 | awk '{ print $1, $9 }'
+ _ls_l $SCRATCH_MNT/bar | tail -n +2 | awk '{ print $1, $9 }'
+ _unmount_flakey
+ _check_scratch_fs $FLAKEY_DEV
+ [ $? -ne 0 ] && _fatal "fsck failed"
+}
+
_scratch_mkfs >> $seqres.full 2>&1
# Create a basic flakey device that will never error out
@@ -157,5 +234,13 @@ for i in $(seq 1 20); do
_run_test $i $direct
done
+rm -rf $SCRATCH_MNT/*
+_unmount_flakey
+_directory_test
+_clean_working_dir
+_rename_test
+_clean_working_dir
+_replay_rename_test
+
status=0
exit
diff --git a/tests/generic/311.out b/tests/generic/311.out
index 5bad6a7..8a0d5c8 100644
--- a/tests/generic/311.out
+++ b/tests/generic/311.out
@@ -319,3 +319,11 @@ Running test 20 direct, nolockfs
Random seed is 20
a16ac2b84456d41a15a1a4cc1202179f
a16ac2b84456d41a15a1a4cc1202179f
+fsync new directory
+drwxr-xr-x bar
+rename fsync test
+drwxr-xr-x bar
+-rw-r--r-- foo
+replay rename fsync test
+drwxr-xr-x bar
+-rw-r--r-- foo
--
1.7.7.6
reply other threads:[~2013-09-11 19:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378928847-2349-1-git-send-email-jbacik@fusionio.com \
--to=jbacik@fusionio.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).