* [PATCH] Btrfs: return failure if btrfs_dev_replace_finishing() failed @ 2014-09-25 10:28 Eryu Guan 2014-10-10 7:13 ` Eryu Guan 0 siblings, 1 reply; 5+ messages in thread From: Eryu Guan @ 2014-09-25 10:28 UTC (permalink / raw) To: linux-btrfs; +Cc: Eryu Guan device replace could fail due to another running scrub process, but this failure doesn't get returned to userspace. The following steps could reproduce this issue mkfs -t btrfs -f /dev/sdb1 /dev/sdb2 mount /dev/sdb1 /mnt/btrfs while true; do btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1 done & btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs # if this replace succeeded, do the following and repeat until # you see this log in dmesg # BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115 #btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs # once you see the error log in dmesg, check return value of # replace echo $? Also only WARN_ON if the return code is not -EINPROGRESS. Signed-off-by: Eryu Guan <guaneryu@gmail.com> --- fs/btrfs/dev-replace.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index eea26e1..44d32ab 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -418,9 +418,11 @@ int btrfs_dev_replace_start(struct btrfs_root *root, &dev_replace->scrub_progress, 0, 1); ret = btrfs_dev_replace_finishing(root->fs_info, ret); - WARN_ON(ret); + /* don't warn if EINPROGRESS, someone else might be running scrub */ + if (ret != -EINPROGRESS) + WARN_ON(ret); - return 0; + return ret; leave: dev_replace->srcdev = NULL; @@ -538,7 +540,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, btrfs_destroy_dev_replace_tgtdev(fs_info, tgt_device); mutex_unlock(&dev_replace->lock_finishing_cancel_unmount); - return 0; + return scrub_ret; } printk_in_rcu(KERN_INFO -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] Btrfs: return failure if btrfs_dev_replace_finishing() failed 2014-09-25 10:28 [PATCH] Btrfs: return failure if btrfs_dev_replace_finishing() failed Eryu Guan @ 2014-10-10 7:13 ` Eryu Guan 2014-10-10 8:24 ` Miao Xie 0 siblings, 1 reply; 5+ messages in thread From: Eryu Guan @ 2014-10-10 7:13 UTC (permalink / raw) To: linux-btrfs On Thu, Sep 25, 2014 at 06:28:14PM +0800, Eryu Guan wrote: > device replace could fail due to another running scrub process, but this > failure doesn't get returned to userspace. > > The following steps could reproduce this issue > > mkfs -t btrfs -f /dev/sdb1 /dev/sdb2 > mount /dev/sdb1 /mnt/btrfs > while true; do > btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1 > done & > btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs > # if this replace succeeded, do the following and repeat until > # you see this log in dmesg > # BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115 > #btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs > > # once you see the error log in dmesg, check return value of > # replace > echo $? > > Also only WARN_ON if the return code is not -EINPROGRESS. > > Signed-off-by: Eryu Guan <guaneryu@gmail.com> Ping, any comments on this patch? Thanks, Eryu > --- > fs/btrfs/dev-replace.c | 8 +++++--- > 1 file changed, 5 insertions(+), 3 deletions(-) > > diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c > index eea26e1..44d32ab 100644 > --- a/fs/btrfs/dev-replace.c > +++ b/fs/btrfs/dev-replace.c > @@ -418,9 +418,11 @@ int btrfs_dev_replace_start(struct btrfs_root *root, > &dev_replace->scrub_progress, 0, 1); > > ret = btrfs_dev_replace_finishing(root->fs_info, ret); > - WARN_ON(ret); > + /* don't warn if EINPROGRESS, someone else might be running scrub */ > + if (ret != -EINPROGRESS) > + WARN_ON(ret); > > - return 0; > + return ret; > > leave: > dev_replace->srcdev = NULL; > @@ -538,7 +540,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, > btrfs_destroy_dev_replace_tgtdev(fs_info, tgt_device); > mutex_unlock(&dev_replace->lock_finishing_cancel_unmount); > > - return 0; > + return scrub_ret; > } > > printk_in_rcu(KERN_INFO > -- > 1.8.3.1 > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Btrfs: return failure if btrfs_dev_replace_finishing() failed 2014-10-10 7:13 ` Eryu Guan @ 2014-10-10 8:24 ` Miao Xie 2014-10-11 6:45 ` Eryu Guan 0 siblings, 1 reply; 5+ messages in thread From: Miao Xie @ 2014-10-10 8:24 UTC (permalink / raw) To: Eryu Guan, linux-btrfs On Fri, 10 Oct 2014 15:13:31 +0800, Eryu Guan wrote: > On Thu, Sep 25, 2014 at 06:28:14PM +0800, Eryu Guan wrote: >> device replace could fail due to another running scrub process, but this >> failure doesn't get returned to userspace. >> >> The following steps could reproduce this issue >> >> mkfs -t btrfs -f /dev/sdb1 /dev/sdb2 >> mount /dev/sdb1 /mnt/btrfs >> while true; do >> btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1 >> done & >> btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs >> # if this replace succeeded, do the following and repeat until >> # you see this log in dmesg >> # BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115 >> #btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs >> >> # once you see the error log in dmesg, check return value of >> # replace >> echo $? >> >> Also only WARN_ON if the return code is not -EINPROGRESS. >> >> Signed-off-by: Eryu Guan <guaneryu@gmail.com> > > Ping, any comments on this patch? > > Thanks, > Eryu >> --- >> fs/btrfs/dev-replace.c | 8 +++++--- >> 1 file changed, 5 insertions(+), 3 deletions(-) >> >> diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c >> index eea26e1..44d32ab 100644 >> --- a/fs/btrfs/dev-replace.c >> +++ b/fs/btrfs/dev-replace.c >> @@ -418,9 +418,11 @@ int btrfs_dev_replace_start(struct btrfs_root *root, >> &dev_replace->scrub_progress, 0, 1); >> >> ret = btrfs_dev_replace_finishing(root->fs_info, ret); >> - WARN_ON(ret); >> + /* don't warn if EINPROGRESS, someone else might be running scrub */ >> + if (ret != -EINPROGRESS) >> + WARN_ON(ret); picky comment I prefer WARN_ON(ret && ret != -EINPROGRESS). >> >> - return 0; >> + return ret; here we will return -EINPROGRESS if scrub is running, I think it better that we assign some special number to args->result, and then return 0, just like the case the device replace is running. Thanks Miao >> >> leave: >> dev_replace->srcdev = NULL; >> @@ -538,7 +540,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, >> btrfs_destroy_dev_replace_tgtdev(fs_info, tgt_device); >> mutex_unlock(&dev_replace->lock_finishing_cancel_unmount); >> >> - return 0; >> + return scrub_ret; >> } >> >> printk_in_rcu(KERN_INFO >> -- >> 1.8.3.1 >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Btrfs: return failure if btrfs_dev_replace_finishing() failed 2014-10-10 8:24 ` Miao Xie @ 2014-10-11 6:45 ` Eryu Guan 2014-10-13 1:41 ` Miao Xie 0 siblings, 1 reply; 5+ messages in thread From: Eryu Guan @ 2014-10-11 6:45 UTC (permalink / raw) To: Miao Xie; +Cc: linux-btrfs On Fri, Oct 10, 2014 at 04:24:26PM +0800, Miao Xie wrote: > On Fri, 10 Oct 2014 15:13:31 +0800, Eryu Guan wrote: > > On Thu, Sep 25, 2014 at 06:28:14PM +0800, Eryu Guan wrote: > >> device replace could fail due to another running scrub process, but this > >> failure doesn't get returned to userspace. > >> > >> The following steps could reproduce this issue > >> > >> mkfs -t btrfs -f /dev/sdb1 /dev/sdb2 > >> mount /dev/sdb1 /mnt/btrfs > >> while true; do > >> btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1 > >> done & > >> btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs > >> # if this replace succeeded, do the following and repeat until > >> # you see this log in dmesg > >> # BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115 > >> #btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs > >> > >> # once you see the error log in dmesg, check return value of > >> # replace > >> echo $? > >> > >> Also only WARN_ON if the return code is not -EINPROGRESS. > >> > >> Signed-off-by: Eryu Guan <guaneryu@gmail.com> > > > > Ping, any comments on this patch? > > > > Thanks, > > Eryu > >> --- > >> fs/btrfs/dev-replace.c | 8 +++++--- > >> 1 file changed, 5 insertions(+), 3 deletions(-) > >> > >> diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c > >> index eea26e1..44d32ab 100644 > >> --- a/fs/btrfs/dev-replace.c > >> +++ b/fs/btrfs/dev-replace.c > >> @@ -418,9 +418,11 @@ int btrfs_dev_replace_start(struct btrfs_root *root, > >> &dev_replace->scrub_progress, 0, 1); > >> > >> ret = btrfs_dev_replace_finishing(root->fs_info, ret); > >> - WARN_ON(ret); > >> + /* don't warn if EINPROGRESS, someone else might be running scrub */ > >> + if (ret != -EINPROGRESS) > >> + WARN_ON(ret); > > picky comment > > I prefer WARN_ON(ret && ret != -EINPROGRESS). Yes, this is simpler :) > > >> > >> - return 0; > >> + return ret; > > here we will return -EINPROGRESS if scrub is running, I think it better that > we assign some special number to args->result, and then return 0, just like > the case the device replace is running. Seems that requires a new result type, say, #define BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS 3 and assign this result to args->result if btrfs_scrub_dev() returned -EINPROGRESS But I don't think returning 0 unconditionally is a good idea, since btrfs_dev_replace_finishing() could return other errors too, that way these errors will be lost, and userspace still won't catch the errors ($? is 0) What I'm thinking about is something like: ret = btrfs_scrub_dev(...); ret = btrfs_dev_replace_finishing(root->fs_info, ret); if (ret == -EINPROGRESS) { args->result = BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS; ret = 0; } else { WARN_ON(ret); } return ret; What do you think? If no objection I'll work on v2. Thanks for your review! Eryu > > Thanks > Miao > > >> > >> leave: > >> dev_replace->srcdev = NULL; > >> @@ -538,7 +540,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, > >> btrfs_destroy_dev_replace_tgtdev(fs_info, tgt_device); > >> mutex_unlock(&dev_replace->lock_finishing_cancel_unmount); > >> > >> - return 0; > >> + return scrub_ret; > >> } > >> > >> printk_in_rcu(KERN_INFO > >> -- > >> 1.8.3.1 > >> > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Btrfs: return failure if btrfs_dev_replace_finishing() failed 2014-10-11 6:45 ` Eryu Guan @ 2014-10-13 1:41 ` Miao Xie 0 siblings, 0 replies; 5+ messages in thread From: Miao Xie @ 2014-10-13 1:41 UTC (permalink / raw) To: Eryu Guan; +Cc: linux-btrfs Guan On Sat, 11 Oct 2014 14:45:29 +0800, Eryu Guan wrote: >>>> device replace could fail due to another running scrub process, but this >>>> failure doesn't get returned to userspace. >>>> >>>> The following steps could reproduce this issue >>>> >>>> mkfs -t btrfs -f /dev/sdb1 /dev/sdb2 >>>> mount /dev/sdb1 /mnt/btrfs >>>> while true; do >>>> btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1 >>>> done & >>>> btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs >>>> # if this replace succeeded, do the following and repeat until >>>> # you see this log in dmesg >>>> # BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115 >>>> #btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs >>>> >>>> # once you see the error log in dmesg, check return value of >>>> # replace >>>> echo $? >>>> >>>> Also only WARN_ON if the return code is not -EINPROGRESS. >>>> >>>> Signed-off-by: Eryu Guan <guaneryu@gmail.com> >>> >>> Ping, any comments on this patch? >>> >>> Thanks, >>> Eryu >>>> --- >>>> fs/btrfs/dev-replace.c | 8 +++++--- >>>> 1 file changed, 5 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c >>>> index eea26e1..44d32ab 100644 >>>> --- a/fs/btrfs/dev-replace.c >>>> +++ b/fs/btrfs/dev-replace.c >>>> @@ -418,9 +418,11 @@ int btrfs_dev_replace_start(struct btrfs_root *root, >>>> &dev_replace->scrub_progress, 0, 1); >>>> >>>> ret = btrfs_dev_replace_finishing(root->fs_info, ret); >>>> - WARN_ON(ret); >>>> + /* don't warn if EINPROGRESS, someone else might be running scrub */ >>>> + if (ret != -EINPROGRESS) >>>> + WARN_ON(ret); >> >> picky comment >> >> I prefer WARN_ON(ret && ret != -EINPROGRESS). > > Yes, this is simpler :) >> >>>> >>>> - return 0; >>>> + return ret; >> >> here we will return -EINPROGRESS if scrub is running, I think it better that >> we assign some special number to args->result, and then return 0, just like >> the case the device replace is running. > > Seems that requires a new result type, say, > > #define BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS 3 > > and assign this result to args->result if btrfs_scrub_dev() returned -EINPROGRESS > > But I don't think returning 0 unconditionally is a good idea, since > btrfs_dev_replace_finishing() could return other errors too, that way > these errors will be lost, and userspace still won't catch the > errors ($? is 0) Of course. Maybe the above explanation of mine was not so clear. In fact, I just talked about the EINPROGRESS case, for the other case, returning error code is better. > What I'm thinking about is something like: > > ret = btrfs_scrub_dev(...); > ret = btrfs_dev_replace_finishing(root->fs_info, ret); > if (ret == -EINPROGRESS) { > args->result = BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS; > ret = 0; > } else { > WARN_ON(ret); > } > > return ret; > > What do you think? If no objection I'll work on v2. I like it. Thanks Miao > Thanks for your review! > > Eryu >> >> Thanks >> Miao >> >>>> >>>> leave: >>>> dev_replace->srcdev = NULL; >>>> @@ -538,7 +540,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, >>>> btrfs_destroy_dev_replace_tgtdev(fs_info, tgt_device); >>>> mutex_unlock(&dev_replace->lock_finishing_cancel_unmount); >>>> >>>> - return 0; >>>> + return scrub_ret; >>>> } >>>> >>>> printk_in_rcu(KERN_INFO >>>> -- >>>> 1.8.3.1 >>>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >> > . > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-10-13 1:40 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-09-25 10:28 [PATCH] Btrfs: return failure if btrfs_dev_replace_finishing() failed Eryu Guan 2014-10-10 7:13 ` Eryu Guan 2014-10-10 8:24 ` Miao Xie 2014-10-11 6:45 ` Eryu Guan 2014-10-13 1:41 ` Miao Xie
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).