From: Chandan Rajendra <chandan@linux.vnet.ibm.com>
To: clm@fb.com, jbacik@fb.com, dsterba@suse.com
Cc: Chandan Rajendra <chandan@linux.vnet.ibm.com>,
linux-btrfs@vger.kernel.org
Subject: [PATCH V20 10/19] Btrfs: subpage-blocksize: btrfs_punch_hole: Fix uptodate blocks check
Date: Mon, 4 Jul 2016 10:04:30 +0530 [thread overview]
Message-ID: <1467606879-14181-11-git-send-email-chandan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1467606879-14181-1-git-send-email-chandan@linux.vnet.ibm.com>
In case of subpage-blocksize, the file blocks to be punched may map only
part of a page. For file blocks inside such pages, we need to check for
the presence of BLK_STATE_UPTODATE flag.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
---
fs/btrfs/file.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 88 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 38f5e8e..89ded7b 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2335,6 +2335,8 @@ static int btrfs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
struct btrfs_path *path;
struct btrfs_block_rsv *rsv;
struct btrfs_trans_handle *trans;
+ struct address_space *mapping = inode->i_mapping;
+ pgoff_t start_index, end_index;
u64 lockstart;
u64 lockend;
u64 tail_start;
@@ -2347,6 +2349,7 @@ static int btrfs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
int err = 0;
unsigned int rsv_count;
bool same_block;
+ bool same_page;
bool no_holes = btrfs_fs_incompat(root->fs_info, NO_HOLES);
u64 ino_size;
bool truncated_block = false;
@@ -2443,11 +2446,45 @@ static int btrfs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
goto out_only_mutex;
}
+ start_index = lockstart >> PAGE_SHIFT;
+ end_index = lockend >> PAGE_SHIFT;
+
+ same_page = lockstart >> PAGE_SHIFT
+ == lockend >> PAGE_SHIFT;
+
while (1) {
struct btrfs_ordered_extent *ordered;
+ struct page *start_page = NULL;
+ struct page *end_page = NULL;
+ u64 nr_pages;
+ int start_page_blks_uptodate;
+ int end_page_blks_uptodate;
truncate_pagecache_range(inode, lockstart, lockend);
+ if (lockstart & (PAGE_SIZE - 1)) {
+ start_page = find_or_create_page(mapping, start_index,
+ GFP_NOFS);
+ if (!start_page) {
+ inode_unlock(inode);
+ return -ENOMEM;
+ }
+ }
+
+ if (!same_page && ((lockend + 1) & (PAGE_SIZE - 1))) {
+ end_page = find_or_create_page(mapping, end_index,
+ GFP_NOFS);
+ if (!end_page) {
+ if (start_page) {
+ unlock_page(start_page);
+ put_page(start_page);
+ }
+ inode_unlock(inode);
+ return -ENOMEM;
+ }
+ }
+
+
lock_extent_bits(&BTRFS_I(inode)->io_tree, lockstart, lockend,
&cached_state);
ordered = btrfs_lookup_first_ordered_extent(inode, lockend);
@@ -2457,18 +2494,68 @@ static int btrfs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
* and nobody raced in and read a page in this range, if we did
* we need to try again.
*/
+ nr_pages = round_up(lockend, PAGE_SIZE)
+ - round_down(lockstart, PAGE_SIZE);
+ nr_pages >>= PAGE_SHIFT;
+
+ start_page_blks_uptodate = 0;
+ end_page_blks_uptodate = 0;
+ if (root->sectorsize < PAGE_SIZE) {
+ u64 page_end;
+
+ page_end = round_down(lockstart, PAGE_SIZE)
+ + PAGE_SIZE - 1;
+ page_end = min(page_end, lockend);
+ if (start_page
+ && PagePrivate(start_page)
+ && test_page_blks_state(start_page, 1 << BLK_STATE_UPTODATE,
+ lockstart, page_end, 0))
+ start_page_blks_uptodate = 1;
+ if (end_page
+ && PagePrivate(end_page)
+ && test_page_blks_state(end_page, 1 << BLK_STATE_UPTODATE,
+ page_offset(end_page), lockend, 0))
+ end_page_blks_uptodate = 1;
+ } else {
+ if (start_page && PagePrivate(start_page)
+ && PageUptodate(start_page))
+ start_page_blks_uptodate = 1;
+ if (end_page && PagePrivate(end_page)
+ && PageUptodate(end_page))
+ end_page_blks_uptodate = 1;
+ }
+
if ((!ordered ||
(ordered->file_offset + ordered->len <= lockstart ||
ordered->file_offset > lockend)) &&
- !btrfs_page_exists_in_range(inode, lockstart, lockend)) {
+ (!start_page_blks_uptodate && !end_page_blks_uptodate &&
+ !(nr_pages > 2 && btrfs_page_exists_in_range(inode,
+ round_up(lockstart, PAGE_SIZE),
+ round_down(lockend, PAGE_SIZE) - 1)))) {
if (ordered)
btrfs_put_ordered_extent(ordered);
+ if (end_page) {
+ unlock_page(end_page);
+ put_page(end_page);
+ }
+ if (start_page) {
+ unlock_page(start_page);
+ put_page(start_page);
+ }
break;
}
if (ordered)
btrfs_put_ordered_extent(ordered);
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart,
lockend, &cached_state, GFP_NOFS);
+ if (end_page) {
+ unlock_page(end_page);
+ put_page(end_page);
+ }
+ if (start_page) {
+ unlock_page(start_page);
+ put_page(start_page);
+ }
ret = btrfs_wait_ordered_range(inode, lockstart,
lockend - lockstart + 1);
if (ret) {
--
2.5.5
next prev parent reply other threads:[~2016-07-04 4:35 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-04 4:34 [PATCH V20 00/19] Allow I/O on blocks whose size is less than page size Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 01/19] Btrfs: subpage-blocksize: Fix whole page read Chandan Rajendra
2016-07-26 16:11 ` Josef Bacik
2016-07-27 10:15 ` Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 02/19] Btrfs: subpage-blocksize: Fix whole page write Chandan Rajendra
2016-07-26 17:18 ` Josef Bacik
2016-07-04 4:34 ` [PATCH V20 03/19] Btrfs: subpage-blocksize: Make sure delalloc range intersects with the locked page's range Chandan Rajendra
2016-07-26 17:19 ` Josef Bacik
2016-07-04 4:34 ` [PATCH V20 04/19] Btrfs: subpage-blocksize: Define extent_buffer_head Chandan Rajendra
2016-07-26 17:42 ` Josef Bacik
2016-07-27 14:49 ` Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 05/19] Btrfs: subpage-blocksize: Read tree blocks whose size is < PAGE_SIZE Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 06/19] Btrfs: subpage-blocksize: Write only dirty extent buffers belonging to a page Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 07/19] Btrfs: subpage-blocksize: Allow mounting filesystems where sectorsize < PAGE_SIZE Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 08/19] Btrfs: subpage-blocksize: Deal with partial ordered extent allocations Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 09/19] Btrfs: subpage-blocksize: Explicitly track I/O status of blocks of an ordered extent Chandan Rajendra
2016-07-04 4:34 ` Chandan Rajendra [this message]
2016-07-04 4:34 ` [PATCH V20 11/19] Btrfs: subpage-blocksize: Prevent writes to an extent buffer when PG_writeback flag is set Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 12/19] Revert "btrfs: fix lockups from btrfs_clear_path_blocking" Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 13/19] Btrfs: subpage-blocksize: Fix file defragmentation code Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 14/19] Btrfs: subpage-blocksize: Enable dedupe ioctl Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 15/19] Btrfs: subpage-blocksize: btrfs_clone: Flush dirty blocks of a page that do not map the clone range Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 16/19] Btrfs: subpage-blocksize: Make file extent relocate code subpage blocksize aware Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 17/19] Btrfs: subpage-blocksize: __btrfs_lookup_bio_sums: Set offset when moving to a new bio_vec Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 18/19] Btrfs: subpage-blocksize: Disable compression Chandan Rajendra
2016-07-04 4:34 ` [PATCH V20 19/19] Btrfs: subpage-blocksize: Rate limit scrub error message Chandan Rajendra
2016-07-12 16:06 ` David Sterba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467606879-14181-11-git-send-email-chandan@linux.vnet.ibm.com \
--to=chandan@linux.vnet.ibm.com \
--cc=clm@fb.com \
--cc=dsterba@suse.com \
--cc=jbacik@fb.com \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).