From: Nikolay Borisov <nborisov@suse.com>
To: linux-btrfs@vger.kernel.org
Cc: wqu@suse.com, Nikolay Borisov <nborisov@suse.com>
Subject: [PATCH] btrfs: Move qgroup rescan on quota enable to btrfs_quota_enable
Date: Wed, 31 Jan 2018 10:52:04 +0200 [thread overview]
Message-ID: <1517388724-1483-1-git-send-email-nborisov@suse.com> (raw)
Currently btrfs_run_qgroups is doing a bit too much. Not only is it
responsible for synchronizing in-memory state of qgroups to disk but
it also contains code to trigger the initial qgroup rescan when
quota is enabled initially. This condition is detected by checking that
BTRFS_FS_QUOTA_ENABLED is not set and BTRFS_FS_QUOTA_ENABLING is set.
Nothing really requires fro the code to be structured (and scattered)
the way it is so let's streamline things. First move the quota rescan
code into btrfs_quota_enable, where its invocation is closer to the
user. This also makes the FS_QUOTA_ENABLING flag redundant so let's
remove it as well.i
This has been tested with a full xfstest run with qgroups enabled on
the scratch device of every xfstest and no regressions were observed.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
---
fs/btrfs/ctree.h | 1 -
fs/btrfs/qgroup.c | 35 ++++++++++-------------------------
2 files changed, 10 insertions(+), 26 deletions(-)
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 1a462ab85c49..83b645920aba 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -707,7 +707,6 @@ struct btrfs_delayed_root;
#define BTRFS_FS_LOG_RECOVERING 4
#define BTRFS_FS_OPEN 5
#define BTRFS_FS_QUOTA_ENABLED 6
-#define BTRFS_FS_QUOTA_ENABLING 7
#define BTRFS_FS_UPDATE_UUID_TREE_GEN 9
#define BTRFS_FS_CREATING_FREE_SPACE_TREE 10
#define BTRFS_FS_BTREE_ERR 11
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index f822152693a4..5b446d1bb22d 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -826,10 +826,8 @@ int btrfs_quota_enable(struct btrfs_trans_handle *trans,
int slot;
mutex_lock(&fs_info->qgroup_ioctl_lock);
- if (fs_info->quota_root) {
- set_bit(BTRFS_FS_QUOTA_ENABLING, &fs_info->flags);
+ if (fs_info->quota_root)
goto out;
- }
fs_info->qgroup_ulist = ulist_alloc(GFP_KERNEL);
if (!fs_info->qgroup_ulist) {
@@ -923,8 +921,15 @@ int btrfs_quota_enable(struct btrfs_trans_handle *trans,
}
spin_lock(&fs_info->qgroup_lock);
fs_info->quota_root = quota_root;
- set_bit(BTRFS_FS_QUOTA_ENABLING, &fs_info->flags);
+ set_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
spin_unlock(&fs_info->qgroup_lock);
+ ret = qgroup_rescan_init(fs_info, 0, 1);
+ if (!ret) {
+ qgroup_rescan_zero_tracking(fs_info);
+ btrfs_queue_work(fs_info->qgroup_rescan_workers,
+ &fs_info->qgroup_rescan_work);
+ }
+
out_free_path:
btrfs_free_path(path);
out_free_root:
@@ -2077,17 +2082,9 @@ int btrfs_run_qgroups(struct btrfs_trans_handle *trans,
{
struct btrfs_root *quota_root = fs_info->quota_root;
int ret = 0;
- int start_rescan_worker = 0;
if (!quota_root)
- goto out;
-
- if (!test_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags) &&
- test_bit(BTRFS_FS_QUOTA_ENABLING, &fs_info->flags))
- start_rescan_worker = 1;
-
- if (test_and_clear_bit(BTRFS_FS_QUOTA_ENABLING, &fs_info->flags))
- set_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
+ return ret;
spin_lock(&fs_info->qgroup_lock);
while (!list_empty(&fs_info->dirty_qgroups)) {
@@ -2116,18 +2113,6 @@ int btrfs_run_qgroups(struct btrfs_trans_handle *trans,
if (ret)
fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT;
- if (!ret && start_rescan_worker) {
- ret = qgroup_rescan_init(fs_info, 0, 1);
- if (!ret) {
- qgroup_rescan_zero_tracking(fs_info);
- btrfs_queue_work(fs_info->qgroup_rescan_workers,
- &fs_info->qgroup_rescan_work);
- }
- ret = 0;
- }
-
-out:
-
return ret;
}
--
2.7.4
next reply other threads:[~2018-01-31 8:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-31 8:52 Nikolay Borisov [this message]
2018-02-03 3:30 ` [PATCH] btrfs: Move qgroup rescan on quota enable to btrfs_quota_enable Qu Wenruo
2018-02-12 18:20 ` David Sterba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1517388724-1483-1-git-send-email-nborisov@suse.com \
--to=nborisov@suse.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=wqu@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).