From: Marcel Runte <marcel.runte@web.de>
To: linux-btrfs@vger.kernel.org
Subject: Kernel oops after compile error
Date: Thu, 31 Jul 2008 00:44:51 +0200 [thread overview]
Message-ID: <1905261913@web.de> (raw)
Hello,
I fiddled around with btrfs this evening and need some further insight =
into this error.
During compilation this error occurs:
/home/runtema/btrfs_build/kernel-9da425337329/file.c: In Funktion =BBbt=
rfs_file_write=AB:
/home/runtema/btrfs_build/kernel-9da425337329/file.c:851: Warnung: =DCb=
ergabe des Arguments 1 von =BBremove_suid=AB von inkompatiblem Zeigerty=
p
As you see, I used a newer release from kernel.org to build btrfs. The =
german error message nearly translates into: "Warning: Handover of argu=
ment 1 of =BBremove_suid=AB is of incompatible pointertype."
Rest of compilation is OK. Compilation of brtfs-progs is OK.
After that, a write try on an loop mounted btrfs file(-system) leads to=
a kernel oops:
#modprobe libcrc32c -> OK
#insmod /lib/modules/2.6.22-15-generic/extra/btrfs.ko -> OK
#diff /home/runtema/btrfs_build/kernel-9da425337329/btrfs.ko /lib/modul=
es/2.6.22-15-generic/extra/btrfs.ko -> $ret =3D 0
$dd if=3D/dev/urandom of=3D/home/runtema/test bs=3D1024 count=3D1000000
$/home/runtema/btrfs_build/kernel-9da425337329/mkfs.btrfs /home/runtema=
/test ->OK
$sudo mkdir /mnt/btrfs-test
$sudo mount -t btrfs -o loop /home/runtema/test /mnt/btrfs-test ->OK!
$sudo touch /mnt/btrfs-test -> still OK!
#date >> /mnt/btrfs-test/otto -> leads to oops:
[ 3977.384000] device fsid da43617984b1c492-9501950cbfd6d589 devid 1 tr=
ansid 22 /dev/loop0
[ 4001.664000] BUG: unable to handle kernel NULL pointer dereference at=
virtual address 00000014
[ 4001.664000] printing eip:
[ 4001.664000] c015e4d1
[ 4001.664000] *pde =3D 00000000
[ 4001.664000] Oops: 0000 [#2]
[ 4001.664000] SMP
[ 4001.664000] Modules linked in: btrfs libcrc32c loop xt_TCPMSS xt_tcp=
mss xt_tcpudp iptable_filter ip_tables x_tables pppoe pppox af_packet p=
pp_generic slhc rfcomm l2cap bluetooth vboxdrv ppdev powernow_k8 cpufre=
q_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table=
cpufreq_conservative video sbs button dock container ac battery ext2 p=
arport_pc lp parport snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm sn=
d_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi fglrx(P) psmouse snd_s=
eq_midi_event agpgart serio_raw k8temp snd_seq snd_timer snd_seq_device=
snd soundcore i2c_nforce2 pcspkr snd_page_alloc shpchp i2c_core pci_ho=
tplug ipv6 evdev ext3 jbd mbcache sg sr_mod sd_mod cdrom usbhid hid sat=
a_nv floppy ehci_hcd r8169 b44 mii ata_generic libata scsi_mod ohci_hcd=
usbcore raid10 raid456 xor raid1 raid0 multipath linear md_mod dm_mirr=
or dm_snapshot dm_mod thermal processor fan capability commoncap fuse
[ 4001.664000] CPU: 1
[ 4001.664000] EIP: 0060:[<c015e4d1>] Tainted: P VLI
[ 4001.664000] EFLAGS: 00010206 (2.6.22-15-generic #1)
[ 4001.664000] EIP is at should_remove_suid+0x1/0x50
[ 4001.664000] eax: 00000008 ebx: f4d22bb0 ecx: ffffffff edx: e0a=
ae480
[ 4001.664000] esi: db41e5d0 edi: 0000001e ebp: 0000001e esp: dce=
b9eac
[ 4001.664000] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
[ 4001.664000] Process date (pid: 13142, ti=3Ddceb8000 task=3Df78d4f90 =
task.ti=3Ddceb8000)
[ 4001.664000] Stack: f4d22bb0 c015e52b db41e650 f9e5f55f 00000000 0000=
00b6 f4cb8000 c018a9c7
[ 4001.664000] dcf6f244 00000287 dceb9ef0 c01ff210 b7c7c000 e0aa=
e480 dceb9f50 00000000
[ 4001.664000] 00000000 00000812 db41e650 f4228200 0098c01a 0000=
81a4 00000001 00000000
[ 4001.664000] Call Trace:
[ 4001.664000] [<c015e52b>] remove_suid+0xb/0x20
[ 4001.664000] [<f9e5f55f>] btrfs_file_write+0x1ef/0x9b0 [btrfs]
[ 4001.664000] [<c018a9c7>] do_path_lookup+0x97/0x1d0
[ 4001.664000] [<c01ff210>] copy_to_user+0x30/0x60
[ 4001.664000] [<c0180d0e>] vfs_write+0xbe/0x170
[ 4001.664000] [<f9e5f370>] btrfs_file_write+0x0/0x9b0 [btrfs]
[ 4001.664000] [<c0181421>] sys_write+0x41/0x70
[ 4001.664000] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 4001.664000] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
[ 4001.664000] Code: 8d 76 00 8d bc 27 00 00 00 00 53 80 ce 02 83 ec 34=
89 c3 89 14 24 8b 13 89 e1 8b 40 04 e8 d8 71 03 00 83 c4 34 5b c3 8d 7=
6 00 53 <8b> 40 0c 0f b7 50 6a 89 d0 25 00 08 00 00 83 f8 01 19 db 81 e=
2
[ 4001.664000] EIP: [<c015e4d1>] should_remove_suid+0x1/0x50 SS:ESP 006=
8:dceb9eac
My System:
cat /etc/lsb-release
DISTRIB_ID=3DUbuntu
DISTRIB_RELEASE=3D7.10
DISTRIB_CODENAME=3Dgutsy
DISTRIB_DESCRIPTION=3D"Ubuntu 7.10"
My Kernel: 2.6.22-15-generic #1 SMP Fri Jul 11 19:25:33 UTC 2008 i686, =
dpgk-list says this is 2.6.22-15.56
make and ggc version used during build process: GNU Make 3.81, gcc (GCC=
) 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
Am I overlooking something?
Any help appreciated.
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" =
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2008-07-30 22:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-30 22:44 Marcel Runte [this message]
2008-07-31 1:11 ` Kernel oops after compile error Yan Zheng
2008-07-31 13:43 ` Chris Mason
-- strict thread matches above, loose matches on Subject: below --
2008-07-31 18:53 Marcel Runte
2008-08-01 3:01 ` Yan Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1905261913@web.de \
--to=marcel.runte@web.de \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox