From mboxrd@z Thu Jan 1 00:00:00 1970 From: Josh Durgin Subject: Re: Ceph on btrfs 3.4rc Date: Thu, 03 May 2012 09:38:27 -0700 Message-ID: <1e9c626272411bb1fb403a3aa8aeced7@hq.newdream.net> References: <20120424152141.GB3326@localhost.localdomain> <20120503141354.GC1914@localhost.localdomain> <20120503152053.GA7313@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Cc: Christian Brunner , Sage Weil , , To: Josef Bacik Return-path: In-Reply-To: <20120503152053.GA7313@localhost.localdomain> List-ID: On Thu, 3 May 2012 11:20:53 -0400, Josef Bacik wrote: > On Thu, May 03, 2012 at 08:17:43AM -0700, Josh Durgin wrote: >> On Thu, 3 May 2012 10:13:55 -0400, Josef Bacik >> wrote: >> > On Fri, Apr 27, 2012 at 01:02:08PM +0200, Christian Brunner wrote: >> >> Am 24. April 2012 18:26 schrieb Sage Weil : >> >> > On Tue, 24 Apr 2012, Josef Bacik wrote: >> >> >> On Fri, Apr 20, 2012 at 05:09:34PM +0200, Christian Brunner wr= ote: >> >> >> > After running ceph on XFS for some time, I decided to try bt= rfs again. >> >> >> > Performance with the current "for-linux-min" branch and big = metadata >> >> >> > is much better. The only problem (?) I'm still seeing is a w= arning >> >> >> > that seems to occur from time to time: >> >> > >> >> > Actually, before you do that... we have a new tool, >> >> > test_filestore_workloadgen, that generates a ceph-osd-like work= load on the >> >> > local file system. =C2=A0It's a subset of what a full OSD might= do, but if >> >> > we're lucky it will be sufficient to reproduce this issue. =C2=A0= Something like >> >> > >> >> > =C2=A0test_filestore_workloadgen --osd-data /foo --osd-journal = /bar >> >> > >> >> > will hopefully do the trick. >> >> > >> >> > Christian, maybe you can see if that is able to trigger this wa= rning? >> >> > You'll need to pull it from the current master branch; it wasn'= t in the >> >> > last release. >> >> >> >> Trying to reproduce with test_filestore_workloadgen didn't work f= or >> >> me. So here are some instructions on how to reproduce with a mini= mal >> >> ceph setup. >> >> >> >> You will need a single system with two disks and a bit of memory. >> >> >> >> - Compile and install ceph (detailed instructions: >> >> http://ceph.newdream.net/docs/master/ops/install/mkcephfs/) >> >> >> >> - For the test setup I've used two tmpfs files as journal devices= =2E To >> >> create these, do the following: >> >> >> >> # mkdir -p /ceph/temp >> >> # mount -t tmpfs tmpfs /ceph/temp >> >> # dd if=3D/dev/zero of=3D/ceph/temp/journal0 count=3D500 bs=3D102= 4k >> >> # dd if=3D/dev/zero of=3D/ceph/temp/journal1 count=3D500 bs=3D102= 4k >> >> >> >> - Now you should create and mount btrfs. Here is what I did: >> >> >> >> # mkfs.btrfs -l 64k -n 64k /dev/sda >> >> # mkfs.btrfs -l 64k -n 64k /dev/sdb >> >> # mkdir /ceph/osd.000 >> >> # mkdir /ceph/osd.001 >> >> # mount -o noatime,space_cache,inode_cache,autodefrag /dev/sda /c= eph/osd.000 >> >> # mount -o noatime,space_cache,inode_cache,autodefrag /dev/sdb /c= eph/osd.001 >> >> >> >> - Create /etc/ceph/ceph.conf similar to the attached ceph.conf. Y= ou >> >> will probably have to change the btrfs devices and the hostname >> >> (os39). >> >> >> >> - Create the ceph filesystems: >> >> >> >> # mkdir /ceph/mon >> >> # mkcephfs -a -c /etc/ceph/ceph.conf >> >> >> >> - Start ceph (e.g. "service ceph start") >> >> >> >> - Now you should be able to use ceph - "ceph -s" will tell you ab= out >> >> the state of the ceph cluster. >> >> >> >> - "rbd create -size 100 testimg" will create an rbd image on the = ceph cluster. >> >> >> > >> > It's failing here >> > >> > http://fpaste.org/e3BG/ >> >> 2012-05-03 10:11:28.818308 7fcb5a0ee700 -- 127.0.0.1:0/1003269 <=3D=3D >> osd.1 127.0.0.1:6803/2379 3 =3D=3D=3D=3D osd_op_reply(3 rbd_info [ca= ll] =3D -5 >> (Input/output error)) v4 =3D=3D=3D=3D 107+0+0 (3948821281 0 0) 0x7fc= b380009a0 >> con 0x1cad3e0 >> >> This is probably because the osd isn't finding the rbd class. >> Do you have 'rbd_cls.so' in /usr/lib64/rados-classes? Wherever >> rbd_cls.so is, >> try adding 'osd class dir =3D /path/to/rados-classes' to the [osd] >> section >> in your ceph.conf, and restarting the osds. >> >> If you set 'debug osd =3D 10' you should see '_load_class rbd' in th= e osd >> log >> when you try to create an rbd image. >> >> Autotools should be setting the default location correctly, but if >> you're >> running the osds in a chroot or something the path would be wrong. >> >=20 > Yeah all that was in the right place, I rebooted and I magically > stopped getting > that error, but now I'm getting this >=20 > http://fpaste.org/OE92/ >=20 > with that ping thing repeating over and over. Thanks, That just looks like the osd isn't running. If you restart the osd with 'debug osd =3D 20' the osd log should tell us what's going on. -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html