From: Anand Jain <anand.jain@oracle.com>
To: Eryu Guan <guaneryu@gmail.com>, Nikolay Borisov <nborisov@suse.com>
Cc: fstests@vger.kernel.org, linux-btrfs@vger.kernel.org
Subject: Re: [PATCH v2] fstests: btrfs/048: amend property validation cases
Date: Sun, 7 Apr 2019 19:54:24 +0800 [thread overview]
Message-ID: <20062818-d303-047c-358f-52ac9dad50de@oracle.com> (raw)
In-Reply-To: <20190406120207.GG2824@desktop>
On 6/4/19 8:02 pm, Eryu Guan wrote:
> On Fri, Apr 05, 2019 at 04:21:10PM +0300, Nikolay Borisov wrote:
>>
>>
>> On 3.04.19 г. 20:04 ч., Anand Jain wrote:
>>> Add more property validation cases which are fixed by the patches [1]
>>> [1]
>>> btrfs: fix vanished compression property after failed set
>>> btrfs: fix zstd compression parameter
>>>
>>> Signed-off-by: Anand Jain <anand.jain@oracle.com>
>>
>> Reviewed-by: Nikolay Borisov <nborisov@suse.com>
>
> Thanks for the test and the review!
>
> But this looks like a targeted regression test that may fail an existing
> test. It's better to write a new test for this.
Regression is only when fstests is upgraded. This
test case mentions the prerequisite kernel patches [1].
So that should suffice the concern?
Thanks, Anand
>
> Thanks,
> Eryu
>
>>
>>> ---
>>> v2: correct kernel patch titles in the test header and change log
>>>
>>> tests/btrfs/048 | 23 +++++++++++++++++++++++
>>> tests/btrfs/048.out | 16 ++++++++++++++++
>>> 2 files changed, 39 insertions(+)
>>>
>>> diff --git a/tests/btrfs/048 b/tests/btrfs/048
>>> index 588219579cc6..f6de0b8ca8b1 100755
>>> --- a/tests/btrfs/048
>>> +++ b/tests/btrfs/048
>>> @@ -6,6 +6,9 @@
>>> #
>>> # Btrfs properties test. The btrfs properties feature was introduced in the
>>> # linux kernel 3.14.
[1]
>>> +# Fails without the kernel patches:
>>> +# btrfs: fix vanished compression property after failed set
>>> +# btrfs: fix zstd compression parameter
>>> #
>>> seq=`basename $0`
>>> seqres=$RESULT_DIR/$seq
>>> @@ -34,6 +37,7 @@ _supported_os Linux
>>> _require_test
>>> _require_scratch
>>> _require_btrfs_command "property"
>>> +_require_btrfs_command inspect-internal dump-super
>>>
>>> send_files_dir=$TEST_DIR/btrfs-test-$seq
>>>
>>> @@ -203,5 +207,24 @@ $BTRFS_UTIL_PROG property get $SCRATCH_MNT/sv1 compression
>>> touch $SCRATCH_MNT/sv1/file2
>>> $BTRFS_UTIL_PROG property get $SCRATCH_MNT/sv1/file2 compression
>>>
>>> +echo -e "\nTesting argument validation, should fail"
>>> +$BTRFS_UTIL_PROG property set $SCRATCH_MNT compression 'lz' | _filter_scratch
>>> +echo "***"
>>> +$BTRFS_UTIL_PROG property set $SCRATCH_MNT compression 'zli' | _filter_scratch
>>> +echo "***"
>>> +$BTRFS_UTIL_PROG property set $SCRATCH_MNT compression 'zst' | _filter_scratch
>>> +
>>> +echo -e "\nTesting if property is persistent across failed validation"
>>> +$BTRFS_UTIL_PROG property set $SCRATCH_MNT compression 'lzo'
>>> +$BTRFS_UTIL_PROG property set $SCRATCH_MNT compression 'zli' | _filter_scratch
>>> +$BTRFS_UTIL_PROG property get $SCRATCH_MNT compression
>>> +
>>> +echo -e "\nTesting generation is unchanged after failed validation"
>>> +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT
>>> +$BTRFS_UTIL_PROG inspect-internal dump-super $SCRATCH_DEV | grep '^generation'
>>> +$BTRFS_UTIL_PROG property set $SCRATCH_MNT compression 'lz' | _filter_scratch
>>> +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT
>>> +$BTRFS_UTIL_PROG inspect-internal dump-super $SCRATCH_DEV | grep '^generation'
>>> +
>>> status=0
>>> exit
>>> diff --git a/tests/btrfs/048.out b/tests/btrfs/048.out
>>> index 3e4e3d28950a..00f39bc01227 100644
>>> --- a/tests/btrfs/048.out
>>> +++ b/tests/btrfs/048.out
>>> @@ -76,3 +76,19 @@ compression=zlib
>>> Testing subvolume property inheritance
>>> compression=lzo
>>> compression=lzo
>>> +
>>> +Testing argument validation, should fail
>>> +ERROR: failed to set compression for /mnt/scratch: Invalid argument
>>> +***
>>> +ERROR: failed to set compression for /mnt/scratch: Invalid argument
>>> +***
>>> +ERROR: failed to set compression for /mnt/scratch: Invalid argument
>>> +
>>> +Testing if property is persistent across failed validation
>>> +ERROR: failed to set compression for /mnt/scratch: Invalid argument
>>> +compression=lzo
>>> +
>>> +Testing generation is unchanged after failed validation
>>> +generation 7
>>> +ERROR: failed to set compression for /mnt/scratch: Invalid argument
>>> +generation 7
>>>
next prev parent reply other threads:[~2019-04-07 11:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-03 16:54 [PATCH] fstests: btrfs/048: amend property validation cases Anand Jain
2019-04-03 17:04 ` [PATCH v2] " Anand Jain
2019-04-05 13:21 ` Nikolay Borisov
2019-04-06 12:02 ` Eryu Guan
2019-04-07 11:54 ` Anand Jain [this message]
2019-04-07 12:45 ` Nikolay Borisov
2019-04-14 2:47 ` Eryu Guan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20062818-d303-047c-358f-52ac9dad50de@oracle.com \
--to=anand.jain@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=guaneryu@gmail.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=nborisov@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).