* segfault on mounting second device
@ 2012-07-30 18:25 Zbigniew Jędrzejewski-Szmek
2012-07-30 19:29 ` Josef Bacik
0 siblings, 1 reply; 2+ messages in thread
From: Zbigniew Jędrzejewski-Szmek @ 2012-07-30 18:25 UTC (permalink / raw)
To: linux-btrfs
Hi,
I was trying to mount two-disk btrfs without the first disk (the setup is RAID1 data & metadata
on two disks). Kernel is 3.5.0-6-generic from Ubuntu.
[ 977.061470] device label HOME devid 2 transid 24686 /dev/sda3
[ 977.062992] btrfs: allowing degraded mounts
[ 977.063300] btrfs: disk space caching is enabled
[ 977.135840] btrfs: bdev (null) errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
[ 977.136228] btrfs: bdev /dev/sda3 errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
[ 977.888055] [drm] nouveau 0000:00:0d.0: Setting dpms mode 1 on vga encoder (output 0)
[ 981.401171] BUG: unable to handle kernel NULL pointer dereference at 00000008
[ 981.401483] IP: [<c116bb82>] seq_escape+0x12/0xf0
[ 981.401752] *pdpt = 0000000034f97001 *pde = 0000000000000000
[ 981.402384] Oops: 0000 [#1] SMP
[ 981.402633] Modules linked in: netconsole configfs binfmt_misc arc4 snd_hda_codec_realtek nouveau mxm_wmi wmi snd_wavefront video ttm b43 snd_cs4236 drm_kms_helper drm i2c_algo_bit snd_opl3_lib snd_wss_lib bcma snd_hda_intel mac80211 snd_hda_codec cfg80211 snd_hwdep pcspkr snd_mpu401 snd_pcm snd_mpu401_uart snd_page_alloc snd_rawmidi evbug snd_timer snd_seq_device snd k8temp soundcore i2c_nforce2 parport_pc parport mac_hid w83627ehf hwmon_vid autofs4 btrfs libcrc32c zlib_deflate usbhid hid ssb forcedeth sata_sil pata_amd sata_nv [last unloaded: netconsole]
[ 981.404464]
[ 981.404464] Pid: 1, comm: systemd Not tainted 3.5.0-6-generic #6-Ubuntu To Be Filled By O.E.M. To Be Filled By O.E.M./K8NF6G-VSTA
[ 981.404464] EIP: 0060:[<c116bb82>] EFLAGS: 00010286 CPU: 0
[ 981.404464] EIP is at seq_escape+0x12/0xf0
[ 981.404464] EAX: f703ca20 EBX: f73b2000 ECX: f862e8cb EDX: f703ca20
[ 981.404464] ESI: 00000002 EDI: 00000008 EBP: f4c79ebc ESP: f4c79ea0
[ 981.404464] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 981.404464] CR0: 80050033 CR2: 00000008 CR3: 34f94000 CR4: 000007f0
[ 981.404464] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 981.404464] DR6: ffff0ff0 DR7: 00000400
[ 981.404464] Process systemd (pid: 1, ti=f4c78000 task=f4c70000 task.ti=f4c78000)
[ 981.404464] Stack:
[ 981.404464] 00000073 f4c79ec8 c116bc0b f4c79ebc f73b2000 00000002 00000000 f4c79ed8
[ 981.404464] f859c3ac f73b2000 f703ca20 f4531010 f703ca20 f6bd8c00 f4c79f20 c1184b03
[ 981.404464] c177630e c1787722 00000029 00000014 00000000 00000022 c112473d fffbaa90
[ 981.404464] Call Trace:
[ 981.404464] [<c116bc0b>] ? seq_escape+0x9b/0xf0
[ 981.404464] [<f859c3ac>] btrfs_show_devname+0x8c/0xc0 [btrfs]
[ 981.404464] [<c1184b03>] show_mountinfo+0x173/0x260
[ 981.404464] [<c112473d>] ? handle_mm_fault+0x1dd/0x280
[ 981.404464] [<c1168380>] m_show+0x10/0x20
[ 981.404464] [<c116bee5>] seq_read+0xd5/0x3c0
[ 981.404464] [<c116be10>] ? seq_lseek+0x150/0x150
[ 981.404464] [<c114efe9>] vfs_read+0x89/0x160
[ 981.404464] [<c116be10>] ? seq_lseek+0x150/0x150
[ 981.404464] [<c114f0fd>] sys_read+0x3d/0x70
[ 981.404464] [<c15c701f>] sysenter_do_call+0x12/0x28
[ 981.404464] Code: 83 c3 01 39 fb 76 d0 66 90 31 db 83 c4 08 89 d8 5b 5e 5f 5d c3 8d 74 26 00 55 89 e5 57 56 53 83 ec 10 3e 8d 74 26 00 89 d7 89 c2 <0f> b6 37 8b 5a 0c 89 45 e8 8b 00 89 4d ec 8b 4a 04 89 f2 01 c3
[ 981.404464] EIP: [<c116bb82>] seq_escape+0x12/0xf0 SS:ESP 0068:f4c79ea0
[ 981.404464] CR2: 0000000000000008
[ 981.433876] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[ 981.437631] ---[ end trace ec2ba853e06fd789 ]---
[ 981.438875] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 981.438875]
[ 981.439741] panic occurred, switching back to text console
To my untrained eye, it looks like first_dev->name->str is NULL.
if (first_dev) {
rcu_read_lock();
name = rcu_dereference(first_dev->name);
seq_escape(m, name->str, " \t\n\\");
rcu_read_unlock();
} else {
Zbyszek
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: segfault on mounting second device
2012-07-30 18:25 segfault on mounting second device Zbigniew Jędrzejewski-Szmek
@ 2012-07-30 19:29 ` Josef Bacik
0 siblings, 0 replies; 2+ messages in thread
From: Josef Bacik @ 2012-07-30 19:29 UTC (permalink / raw)
To: Zbigniew Jędrzejewski-Szmek; +Cc: linux-btrfs@vger.kernel.org
On Mon, Jul 30, 2012 at 12:25:01PM -0600, Zbigniew Jędrzejewski-Szmek wrote:
> Hi,
>
> I was trying to mount two-disk btrfs without the first disk (the setup is RAID1 data & metadata
> on two disks). Kernel is 3.5.0-6-generic from Ubuntu.
>
> [ 977.061470] device label HOME devid 2 transid 24686 /dev/sda3
> [ 977.062992] btrfs: allowing degraded mounts
> [ 977.063300] btrfs: disk space caching is enabled
> [ 977.135840] btrfs: bdev (null) errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
> [ 977.136228] btrfs: bdev /dev/sda3 errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
> [ 977.888055] [drm] nouveau 0000:00:0d.0: Setting dpms mode 1 on vga encoder (output 0)
> [ 981.401171] BUG: unable to handle kernel NULL pointer dereference at 00000008
> [ 981.401483] IP: [<c116bb82>] seq_escape+0x12/0xf0
> [ 981.401752] *pdpt = 0000000034f97001 *pde = 0000000000000000
> [ 981.402384] Oops: 0000 [#1] SMP
> [ 981.402633] Modules linked in: netconsole configfs binfmt_misc arc4 snd_hda_codec_realtek nouveau mxm_wmi wmi snd_wavefront video ttm b43 snd_cs4236 drm_kms_helper drm i2c_algo_bit snd_opl3_lib snd_wss_lib bcma snd_hda_intel mac80211 snd_hda_codec cfg80211 snd_hwdep pcspkr snd_mpu401 snd_pcm snd_mpu401_uart snd_page_alloc snd_rawmidi evbug snd_timer snd_seq_device snd k8temp soundcore i2c_nforce2 parport_pc parport mac_hid w83627ehf hwmon_vid autofs4 btrfs libcrc32c zlib_deflate usbhid hid ssb forcedeth sata_sil pata_amd sata_nv [last unloaded: netconsole]
> [ 981.404464]
> [ 981.404464] Pid: 1, comm: systemd Not tainted 3.5.0-6-generic #6-Ubuntu To Be Filled By O.E.M. To Be Filled By O.E.M./K8NF6G-VSTA
> [ 981.404464] EIP: 0060:[<c116bb82>] EFLAGS: 00010286 CPU: 0
> [ 981.404464] EIP is at seq_escape+0x12/0xf0
> [ 981.404464] EAX: f703ca20 EBX: f73b2000 ECX: f862e8cb EDX: f703ca20
> [ 981.404464] ESI: 00000002 EDI: 00000008 EBP: f4c79ebc ESP: f4c79ea0
> [ 981.404464] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [ 981.404464] CR0: 80050033 CR2: 00000008 CR3: 34f94000 CR4: 000007f0
> [ 981.404464] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [ 981.404464] DR6: ffff0ff0 DR7: 00000400
> [ 981.404464] Process systemd (pid: 1, ti=f4c78000 task=f4c70000 task.ti=f4c78000)
> [ 981.404464] Stack:
> [ 981.404464] 00000073 f4c79ec8 c116bc0b f4c79ebc f73b2000 00000002 00000000 f4c79ed8
> [ 981.404464] f859c3ac f73b2000 f703ca20 f4531010 f703ca20 f6bd8c00 f4c79f20 c1184b03
> [ 981.404464] c177630e c1787722 00000029 00000014 00000000 00000022 c112473d fffbaa90
> [ 981.404464] Call Trace:
> [ 981.404464] [<c116bc0b>] ? seq_escape+0x9b/0xf0
> [ 981.404464] [<f859c3ac>] btrfs_show_devname+0x8c/0xc0 [btrfs]
> [ 981.404464] [<c1184b03>] show_mountinfo+0x173/0x260
> [ 981.404464] [<c112473d>] ? handle_mm_fault+0x1dd/0x280
> [ 981.404464] [<c1168380>] m_show+0x10/0x20
> [ 981.404464] [<c116bee5>] seq_read+0xd5/0x3c0
> [ 981.404464] [<c116be10>] ? seq_lseek+0x150/0x150
> [ 981.404464] [<c114efe9>] vfs_read+0x89/0x160
> [ 981.404464] [<c116be10>] ? seq_lseek+0x150/0x150
> [ 981.404464] [<c114f0fd>] sys_read+0x3d/0x70
> [ 981.404464] [<c15c701f>] sysenter_do_call+0x12/0x28
> [ 981.404464] Code: 83 c3 01 39 fb 76 d0 66 90 31 db 83 c4 08 89 d8 5b 5e 5f 5d c3 8d 74 26 00 55 89 e5 57 56 53 83 ec 10 3e 8d 74 26 00 89 d7 89 c2 <0f> b6 37 8b 5a 0c 89 45 e8 8b 00 89 4d ec 8b 4a 04 89 f2 01 c3
> [ 981.404464] EIP: [<c116bb82>] seq_escape+0x12/0xf0 SS:ESP 0068:f4c79ea0
> [ 981.404464] CR2: 0000000000000008
> [ 981.433876] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
> [ 981.437631] ---[ end trace ec2ba853e06fd789 ]---
> [ 981.438875] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
> [ 981.438875]
> [ 981.439741] panic occurred, switching back to text console
>
> To my untrained eye, it looks like first_dev->name->str is NULL.
>
> if (first_dev) {
> rcu_read_lock();
> name = rcu_dereference(first_dev->name);
> seq_escape(m, name->str, " \t\n\\");
> rcu_read_unlock();
> } else {
>
> Zbyszek
Hrm oops, I will fix that, thanks for reporting,
Josef
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-07-30 19:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-30 18:25 segfault on mounting second device Zbigniew Jędrzejewski-Szmek
2012-07-30 19:29 ` Josef Bacik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).