* Btrfs prog @ 2013-09-04 11:57 Giuseppe Fierro 2013-09-04 13:32 ` Hugo Mills 0 siblings, 1 reply; 7+ messages in thread From: Giuseppe Fierro @ 2013-09-04 11:57 UTC (permalink / raw) To: linux-btrfs I'm using btrfs on ubuntu 13.04 with btrfs prog v0.20-rc1 This is my configuration using 2 disks in raid1 mode: > gspe@jura:/mnt$ sudo btrfs f show > Label: 'UbuntuDSK' uuid: f4a3c832-f6ab-4b1d-9eb7-f9ba7d1cba01 > Total devices 2 FS bytes used 205.41GB > devid 1 size 2.70TB used 214.03GB path /dev/sdb2 > devid 2 size 2.70TB used 214.01GB path /dev/sda2 > Btrfs v0.20-rc1 Some btrfs command behave strange: If i want to check free space using df, i get: > gspe@jura:/mnt$ sudo btrfs filesystem df / > Data, RAID1: total=212.00GB, used=204.42GB > Data: total=8.00MB, used=0.00 > System, RAID1: total=8.00MB, used=36.00KB > System: total=4.00MB, used=0.00 > Metadata, RAID1: total=2.00GB, used=1010.04MB > Metadata: total=8.00MB, used=0.00 If I would like to show the subvolume, i get > gspe@jura:/mnt$ sudo btrfs subvolume list / > gspe@jura:/mnt$ nothing is shown!!! So what's happen to the btrfs prog? Thanks Giuseppe Fierro ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Btrfs prog 2013-09-04 11:57 Btrfs prog Giuseppe Fierro @ 2013-09-04 13:32 ` Hugo Mills 2013-09-04 13:51 ` Giuseppe Fierro 2013-09-04 14:08 ` Chris Murphy 0 siblings, 2 replies; 7+ messages in thread From: Hugo Mills @ 2013-09-04 13:32 UTC (permalink / raw) To: Giuseppe Fierro; +Cc: linux-btrfs [-- Attachment #1: Type: text/plain, Size: 1722 bytes --] On Wed, Sep 04, 2013 at 01:57:42PM +0200, Giuseppe Fierro wrote: > I'm using btrfs on ubuntu 13.04 with btrfs prog v0.20-rc1 > This is my configuration using 2 disks in raid1 mode: > > > gspe@jura:/mnt$ sudo btrfs f show > > Label: 'UbuntuDSK' uuid: f4a3c832-f6ab-4b1d-9eb7-f9ba7d1cba01 > > Total devices 2 FS bytes used 205.41GB > > devid 1 size 2.70TB used 214.03GB path /dev/sdb2 > > devid 2 size 2.70TB used 214.01GB path /dev/sda2 > > Btrfs v0.20-rc1 > > > Some btrfs command behave strange: > If i want to check free space using df, i get: > > > gspe@jura:/mnt$ sudo btrfs filesystem df / > > Data, RAID1: total=212.00GB, used=204.42GB > > Data: total=8.00MB, used=0.00 > > System, RAID1: total=8.00MB, used=36.00KB > > System: total=4.00MB, used=0.00 > > Metadata, RAID1: total=2.00GB, used=1010.04MB > > Metadata: total=8.00MB, used=0.00 What do you think is wrong with this output? It looks OK to me: From the btrfs fi show at the top, you have 214 GB allocated on each device. The btrfs fi df shows you how that allocation is used: 212 GB (*2, because it's RAID-1) is allocated to data, with 204 GB holding useful data. The remaining 2 GB (*2) is allocated to metadata, and 1 GB of that is actually used. > If I would like to show the subvolume, i get > > > gspe@jura:/mnt$ sudo btrfs subvolume list / > > gspe@jura:/mnt$ > > nothing is shown!!! Try using the -a option. It got added a while ago, and has been a complete pain in the neck ever since... Hugo. -- === Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk === PGP key: 65E74AC0 from wwwkeys.eu.pgp.net or http://www.carfax.org.uk --- The English language has the mot juste for every occasion. --- [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 828 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Btrfs prog 2013-09-04 13:32 ` Hugo Mills @ 2013-09-04 13:51 ` Giuseppe Fierro 2013-09-04 14:10 ` Chris Murphy 2013-09-04 14:08 ` Chris Murphy 1 sibling, 1 reply; 7+ messages in thread From: Giuseppe Fierro @ 2013-09-04 13:51 UTC (permalink / raw) To: Hugo Mills, Giuseppe Fierro, linux-btrfs Thanks, as I can see I misunderstood the meaning of "btrfs filesystem df" I was expecting that the 'df' has been to display free space remaining. The -a option works Giuseppe Fierro On 4 September 2013 15:32, Hugo Mills <hugo@carfax.org.uk> wrote: > On Wed, Sep 04, 2013 at 01:57:42PM +0200, Giuseppe Fierro wrote: >> I'm using btrfs on ubuntu 13.04 with btrfs prog v0.20-rc1 >> This is my configuration using 2 disks in raid1 mode: >> >> > gspe@jura:/mnt$ sudo btrfs f show >> > Label: 'UbuntuDSK' uuid: f4a3c832-f6ab-4b1d-9eb7-f9ba7d1cba01 >> > Total devices 2 FS bytes used 205.41GB >> > devid 1 size 2.70TB used 214.03GB path /dev/sdb2 >> > devid 2 size 2.70TB used 214.01GB path /dev/sda2 >> > Btrfs v0.20-rc1 >> >> >> Some btrfs command behave strange: >> If i want to check free space using df, i get: >> >> > gspe@jura:/mnt$ sudo btrfs filesystem df / >> > Data, RAID1: total=212.00GB, used=204.42GB >> > Data: total=8.00MB, used=0.00 >> > System, RAID1: total=8.00MB, used=36.00KB >> > System: total=4.00MB, used=0.00 >> > Metadata, RAID1: total=2.00GB, used=1010.04MB >> > Metadata: total=8.00MB, used=0.00 > > What do you think is wrong with this output? It looks OK to me: > > From the btrfs fi show at the top, you have 214 GB allocated on > each device. The btrfs fi df shows you how that allocation is used: > 212 GB (*2, because it's RAID-1) is allocated to data, with 204 GB > holding useful data. The remaining 2 GB (*2) is allocated to metadata, > and 1 GB of that is actually used. > >> If I would like to show the subvolume, i get >> >> > gspe@jura:/mnt$ sudo btrfs subvolume list / >> > gspe@jura:/mnt$ >> >> nothing is shown!!! > > Try using the -a option. It got added a while ago, and has been a > complete pain in the neck ever since... > > Hugo. > > -- > === Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk === > PGP key: 65E74AC0 from wwwkeys.eu.pgp.net or http://www.carfax.org.uk > --- The English language has the mot juste for every occasion. --- -- This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of fierro.org. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Btrfs prog 2013-09-04 13:51 ` Giuseppe Fierro @ 2013-09-04 14:10 ` Chris Murphy 2013-09-04 14:26 ` Wang Shilong 0 siblings, 1 reply; 7+ messages in thread From: Chris Murphy @ 2013-09-04 14:10 UTC (permalink / raw) To: Giuseppe Fierro; +Cc: Hugo Mills, linux-btrfs On Sep 4, 2013, at 3:51 PM, Giuseppe Fierro <giuseppe@fierro.org> wrote: > Thanks, > as I can see I misunderstood the meaning of "btrfs filesystem df" I > was expecting that the 'df' has been to display free space remaining. Check the archives, this is a long running issue that no one has particularly great answers for because what free space remains depends on future (unknown) usage of the file system. But I still think it's a worse problem to not report anything at all in btrfs fi df, considering the historical point of df is to show space available. And it's also not good that the regular df shows e.g. for raid1, twice the free space as the amount of data that can be saved to the volume. Chris Murphy ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Btrfs prog 2013-09-04 14:10 ` Chris Murphy @ 2013-09-04 14:26 ` Wang Shilong 0 siblings, 0 replies; 7+ messages in thread From: Wang Shilong @ 2013-09-04 14:26 UTC (permalink / raw) To: Chris Murphy; +Cc: Giuseppe Fierro, Hugo Mills, linux-btrfs 在 2013-9-4，下午10:10，Chris Murphy <lists@colorremedies.com> 写道： > > On Sep 4, 2013, at 3:51 PM, Giuseppe Fierro <giuseppe@fierro.org> wrote: > >> Thanks, >> as I can see I misunderstood the meaning of "btrfs filesystem df" I >> was expecting that the 'df' has been to display free space remaining. > > Check the archives, this is a long running issue that no one has particularly great answers for because what free space remains depends on future (unknown) usage of the file system. But I still think it's a worse problem to not report anything at all in btrfs fi df, considering the historical point of df is to show space available. And it's also not good that the regular df shows e.g. for raid1, twice the free space as the amount of data that can be saved to the volume. > > Chris Murphy-- > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Btrfs prog 2013-09-04 13:32 ` Hugo Mills 2013-09-04 13:51 ` Giuseppe Fierro @ 2013-09-04 14:08 ` Chris Murphy 2013-09-04 14:37 ` Wang Shilong 1 sibling, 1 reply; 7+ messages in thread From: Chris Murphy @ 2013-09-04 14:08 UTC (permalink / raw) To: Hugo Mills; +Cc: Giuseppe Fierro, linux-btrfs On Sep 4, 2013, at 3:32 PM, Hugo Mills <hugo@carfax.org.uk> wrote: >> If I would like to show the subvolume, i get >> >>> gspe@jura:/mnt$ sudo btrfs subvolume list / >>> gspe@jura:/mnt$ >> >> nothing is shown!!! > > Try using the -a option. It got added a while ago, and has been a > complete pain in the neck ever since… What does -a do? I recall with older versions of btrfs-progs that if a subvolume was mounted, btrfs subvol list would only list subvolumes under the one that was mounted, not all subvolumes on the volume. I just tried this with btrfs-progs-0.20.rc1.20130501git7854c8b-4.fc20.x86_64 without -a option, but with a subvolume mounted and the command lists all subvolumes. OK now I'm seeing the behavior is sometimes wrong. [root@f19v ~]# btrfs subvolume create /mnt/cookies Create subvolume '/mnt/cookies' [root@f19v ~]# btrfs subvolume create /mnt/chips Create subvolume '/mnt/chips' [root@f19v ~]# btrfs subvolume create /mnt/nuts Create subvolume '/mnt/nuts' [root@f19v ~]# btrfs subvolume create /mnt/nuts/cashew Create subvolume '/mnt/nuts/cashew' [root@f19v ~]# btrfs subvolume create /mnt/nuts/cashew ERROR: '/mnt/nuts/cashew' exists [root@f19v ~]# btrfs subvolume create /mnt/nuts/cashew/small Create subvolume '/mnt/nuts/cashew/small' [root@f19v ~]# umount /mnt [root@f19v ~]# mount -o subvol=nuts/cashew /dev/sdb /mnt [root@f19v ~]# btrfs subvolume list /mnt ID 256 gen 5 top level 5 path cookies ID 258 gen 10 top level 5 path chips ID 259 gen 12 top level 5 path nuts ID 260 gen 13 top level 5 path nuts/cashew ID 261 gen 13 top level 260 path small The last one should be /nuts/cashew/small. Or the one before it should be cashew instead of nuts/cashew. Chris Murphy ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Btrfs prog 2013-09-04 14:08 ` Chris Murphy @ 2013-09-04 14:37 ` Wang Shilong 0 siblings, 0 replies; 7+ messages in thread From: Wang Shilong @ 2013-09-04 14:37 UTC (permalink / raw) To: Chris Murphy; +Cc: Hugo Mills, Giuseppe Fierro, linux-btrfs Hello Chris, > > On Sep 4, 2013, at 3:32 PM, Hugo Mills <hugo@carfax.org.uk> wrote: > >>> If I would like to show the subvolume, i get >>> >>>> gspe@jura:/mnt$ sudo btrfs subvolume list / >>>> gspe@jura:/mnt$ >>> >>> nothing is shown!!! >> >> Try using the -a option. It got added a while ago, and has been a >> complete pain in the neck ever since… > > What does -a do? > > I recall with older versions of btrfs-progs that if a subvolume was mounted, btrfs subvol list would only list subvolumes under the one that was mounted, not all subvolumes on the volume. I just tried this with btrfs-progs-0.20.rc1.20130501git7854c8b-4.fc20.x86_64 without -a option, but with a subvolume mounted and the command lists all subvolumes. > > OK now I'm seeing the behavior is sometimes wrong. > > [root@f19v ~]# btrfs subvolume create /mnt/cookies > Create subvolume '/mnt/cookies' > [root@f19v ~]# btrfs subvolume create /mnt/chips > Create subvolume '/mnt/chips' > [root@f19v ~]# btrfs subvolume create /mnt/nuts > Create subvolume '/mnt/nuts' > [root@f19v ~]# btrfs subvolume create /mnt/nuts/cashew > Create subvolume '/mnt/nuts/cashew' > [root@f19v ~]# btrfs subvolume create /mnt/nuts/cashew > ERROR: '/mnt/nuts/cashew' exists > [root@f19v ~]# btrfs subvolume create /mnt/nuts/cashew/small > Create subvolume '/mnt/nuts/cashew/small' > [root@f19v ~]# umount /mnt > [root@f19v ~]# mount -o subvol=nuts/cashew /dev/sdb /mnt > [root@f19v ~]# btrfs subvolume list /mnt > ID 256 gen 5 top level 5 path cookies > ID 258 gen 10 top level 5 path chips > ID 259 gen 12 top level 5 path nuts > ID 260 gen 13 top level 5 path nuts/cashew > ID 261 gen 13 top level 260 path small I get the following output: cookies chips nuts nuts/cashew nuts/cashew/small Why "small" occurs in your test box? Thanks, wang > > > The last one should be /nuts/cashew/small. Or the one before it should be cashew instead of nuts/cashew. > > > Chris Murphy > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-09-04 14:38 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-09-04 11:57 Btrfs prog Giuseppe Fierro 2013-09-04 13:32 ` Hugo Mills 2013-09-04 13:51 ` Giuseppe Fierro 2013-09-04 14:10 ` Chris Murphy 2013-09-04 14:26 ` Wang Shilong 2013-09-04 14:08 ` Chris Murphy 2013-09-04 14:37 ` Wang Shilong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).