From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from aserp1040.oracle.com ([141.146.126.69]:29820 "EHLO aserp1040.oracle.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751862AbbDIIKr (ORCPT ); Thu, 9 Apr 2015 04:10:47 -0400 Date: Thu, 9 Apr 2015 16:10:31 +0800 From: Liu Bo To: Paul Harvey Cc: linux-btrfs@vger.kernel.org Subject: Re: BTRFS corruption w/kernel 3.13 while using docker -s btrfs Message-ID: <20150409081028.GA8979@localhost.localdomain> Reply-To: bo.li.liu@oracle.com References: <537844F2.1040507@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <537844F2.1040507@gmail.com> Sender: linux-btrfs-owner@vger.kernel.org List-ID: Hi, On Sun, May 18, 2014 at 03:28:18PM +1000, Paul Harvey wrote: > This is a "Damnit! I held the power button in and now it won't mount!" story, but I'm sharing what I found to learn what I can. And in case it's useful for btrfs development. > > Also curious if my usage of Docker (an LXC thing, http://docker.io) has exacerbated things. I ask because it seems some btrfs mount options are breaking docker: > https://github.com/dotcloud/docker/issues/5429#issuecomment-42443919 - however, I'm not using space_cache or inode_cache myself. > > Notes: > - I've taken a dd copy of the btrfs partition so that I can perform anything extra people would like to see. > - The following output is taken from the same machine, same partition layout but a fresh/working Debian testing install on a different disk. It should be reporting the same as it did before the corruption (it was definitely Linux 3.13). > - /dev/sda is a new disk, /dev/sdb3 is the corrupted btrfs partition. > - I have a single btrfs partition which contains the rootfs. I use subvolumes to separately snapshot /home, /vms, etc. > - mount options were: noatime,autodefrag,discard,compress=lzo > > $ uname -a > Linux weatherwax 3.13-1-amd64 #1 SMP Debian 3.13.10-1 (2014-04-15) > x86_64 GNU/Linux > $ sudo btrfs version > Btrfs v3.14.1 > $ sudo btrfs fi show /dev/sdb3 > Label: 'weatherwax 0' uuid: 721926c3-147a-44a0-8c82-62534dd6ee94 > Total devices 1 FS bytes used 246.14GiB > devid 1 size 357.63GiB used 313.06GiB path /dev/sdb3 > > Btrfs v3.14.1 > $ dmesg # see attached dmesg.txt, includes connecting corrupted disk via USB > $ sudo mount -o recovery,ro /dev/sdb3 /mnt > mount: wrong fs type, bad option, bad superblock on /dev/sdb3, > missing codepage or helper program, or other error > In some cases useful info is found in syslog - try > dmesg | tail or so > [ 1297.632057] btrfs: device label weatherwax 0 devid 1 transid 504075 /dev/sdb3 > [ 1297.633042] btrfs: enabling auto recovery > [ 1297.633045] btrfs: disk space caching is enabled > [ 1297.830793] btrfs bad tree block start 0 632081858560 > [ 1297.831012] btrfs bad tree block start 0 632081858560 > [ 1297.831016] btrfs: failed to read log tree > [ 1297.892241] btrfs: open_ctree failed This shows that your trees are good except log tree, as if btrfs uses backup trees for recovery it'll zero log tree and clear free space cache , I recommend you to use btrfs-zero-log. Thanks, -liubo > $ sudo btrfs-find-root /dev/sdb3 > Super think's the tree root is at 632081670144, chunk root 386274426880 > Went past the fs size, exiting > $ sudo btrfs-image -c9 -t4 /dev/sdb3 /mnt/sdb3.img > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > read block failed check_tree_block > Couldn't setup log root tree > Open ctree failed > create failed (Success) > $ du /mnt/sdb3.img > 0 /mnt/sdb3.img > $ sudo btrfs rescue chunk-recover /dev/sdb3 # Takes a few hours at > 30MiB/sec, reports 326 (IIRC) good chunks, no bad or orphaned chunks. > $ sudo btrfs restore -i /dev/sdb3 /mnt # recovers ~3.2GB of /var from > the old rootfs, nothing useful. A lot of "failed to inflate: -6" > $ sudo btrfs restore -l /dev/sdb3 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > read block failed check_tree_block > Couldn't setup log root tree > tree key (EXTENT_TREE ROOT_ITEM 0) 632081240064 level 3 > tree key (DEV_TREE ROOT_ITEM 0) 631709724672 level 1 > tree key (FS_TREE ROOT_ITEM 0) 632081072128 level 3 > tree key (CSUM_TREE ROOT_ITEM 0) 632079880192 level 3 > tree key (UUID_TREE ROOT_ITEM 0) 632070057984 level 0 > tree key (262 ROOT_ITEM 0) 632079863808 level 3 > tree key (263 ROOT_ITEM 0) 530849677312 level 2 > tree key (264 ROOT_ITEM 0) 632081104896 level 3 > tree key (265 ROOT_ITEM 0) 632070590464 level 3 > tree key (577 ROOT_ITEM 0) 633083752448 level 2 > # ... ~80 more lines of similar output > $ sudo btrfsck /dev/sdb3 # exits quickly, < 2s > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > read block failed check_tree_block > Couldn't setup log root tree > Checking filesystem on /dev/sdb3 > UUID: 721926c3-147a-44a0-8c82-62534dd6ee94 > checking extents > btrfsck[5378]: segfault at 1d8 ip 00000000004176d4 sp 00007fff50ed58a0 error 4 in btrfsck[400000+57000] # from dmesg > $ sudo btrfsck --backup /dev/sdb3 # same output as above, exits just as quickly > btrfsck[5384]: segfault at 1d8 ip 00000000004176d4 sp 00007fff1bf37df0 error 4 in btrfsck[400000+57000] # from dmesg > $ sudo btrfsck --repair -s 1 /dev/sdb3 > using SB copy 1, bytenr 274877906944 > Checking filesystem on /dev/sdb3 > UUID: 721926c3-147a-44a0-8c82-62534dd6ee94 > checking extents > checking free space cache > checking fs roots > root 5 inode 374153 errors 400, nbytes wrong > root 5 inode 374156 errors 400, nbytes wrong > root 5 inode 374157 errors 400, nbytes wrong > root 5 inode 374159 errors 400, nbytes wrong > root 5 inode 374160 errors 400, nbytes wrong > root 5 inode 374162 errors 400, nbytes wrong > root 5 inode 374163 errors 400, nbytes wrong > found 142401001787 bytes used err is 1 > total csum bytes: 254703028 > total tree bytes: 2354339840 > total fs tree bytes: 1903390720 > total extent tree bytes: 145313792 > btree space waste bytes: 541129559 > file data blocks allocated: 1952295919616 > referenced 257779679232 > Btrfs v3.14.1 > $ sudo mount -o recovery,ro /dev/sdb3 /media/usb1/ > [ 5005.342936] btrfs: device label weatherwax 0 devid 1 transid 504075 /dev/sdb3 > [ 5005.343763] btrfs: enabling auto recovery > [ 5005.343767] btrfs: disk space caching is enabled > [ 5005.541425] btrfs bad tree block start 0 632081858560 > [ 5005.541641] btrfs bad tree block start 0 632081858560 > [ 5005.541646] btrfs: failed to read log tree > [ 5005.604631] btrfs: open_ctree failed > $ sudo btrfs restore -i -r 262 /dev/sdb3 /mnt/home/ # This ends up recovering most of the subvol I want to recover. > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > read block failed check_tree_block > Couldn't setup log root tree > failed to inflate: -6 > $ sudo btrfs restore -i -r 263 /dev/sdb3 /mnt/vms/ # This recovers a fair chunk of another subvol, not all... > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > Check tree block failed, want=632081858560, have=0 > read block failed check_tree_block > Couldn't setup log root tree > failed to inflate: -6 > failed to inflate: -6 > failed to inflate: -8 > failed to inflate: -6 > failed to inflate: -6 > failed to inflate: -6 > failed to inflate: -6 > failed to inflate: -8 > failed to inflate: -6 > *** Error in `btrfs': double free or corruption (out): 0x0000000002279f50 *** > btrfs: malloc.c:2368: sysmalloc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct > malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, > fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & > pagemask) == 0)' failed. > > A timeline, starting around midday yesterday: > - I had some work to do and the VPN was slow, so on my laptop I upgraded docker from ~0.8.1 to 0.11.1. > - The upgrade stomped on my "-s btrfs" switch in /etc/default/docker which meant I was accidentally using docker with aufs for a while. > - I fixed this then purged all the containers and images (i.e. btrfs subvolumes). > - I did "docker pull debian:testing" which would have created a few new btrfs subvolumes. > - I ran some "docker build"s and at some point I had two builds going at once (two docker processes each creating btrfs subvolumes/snapshots at the same time). > - At some point one docker build was completed and the other was stalled trying to create a snapshot. > - Minutes later I noticed that my other applications were freezing up. The UI was still responsive and I could use the terminal. > - I looked at syslog and dmesg output in a terminal. There were no messages, ominous or otherwise coinciding with the disk i/o freezing up. > - I held in the power button. > - The reboot didn't boot. I ended up with the dreaded busybox shell, unable to mount btrfs rootfs... > - Removed disk and took a dd copy of sda3. > > Other research... > Certain BTRFS mount options break docker -s btrfs: > - https://github.com/dotcloud/docker/issues/5429#issuecomment-42443919 > > The "AUFS on btrfs" thing has a few mentions in docker issues, perhaps it's nothing to do with btrfs though: > - https://github.com/dotcloud/docker/issues/829 - continued at... > - https://github.com/dotcloud/docker/issues/1075 - continued at... > - https://github.com/dotcloud/docker/issues/2961 > - https://github.com/dotcloud/docker/issues/2056 # just another datapoint. > > Cheers > > -- > Paul Harvey > > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15) > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 ro quiet > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable > [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable > [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cd41cfff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000cd41d000-0x00000000dae9efff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable > [ 0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.7 present. > [ 0.000000] DMI: LENOVO 2306CTO/2306CTO, BIOS G2ET91WW (2.51 ) 01/14/2013 > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] No AGP bridge found > [ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect > [ 0.000000] 1 base 000000000 mask F80000000 write-back > [ 0.000000] 2 base 080000000 mask FC0000000 write-back > [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back > [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable > [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable > [ 0.000000] 6 base 100000000 mask F00000000 write-back > [ 0.000000] 7 base 200000000 mask E00000000 write-back > [ 0.000000] 8 base 400000000 mask FE0000000 write-back > [ 0.000000] 9 base 41F000000 mask FFF000000 uncachable > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] e820: last_pfn = 0xcd41d max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] > [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] BRK [0x01a9a000, 0x01a9afff] PGTABLE > [ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE > [ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x41e400000-0x41e5fffff] > [ 0.000000] [mem 0x41e400000-0x41e5fffff] page 2M > [ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41e3fffff] > [ 0.000000] [mem 0x41c000000-0x41e3fffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] > [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k > [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] > [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M > [ 0.000000] [mem 0x40000000-0x40003fff] page 4k > [ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE > [ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x40005000-0xcd41cfff] > [ 0.000000] [mem 0x40005000-0x401fffff] page 4k > [ 0.000000] [mem 0x40200000-0xcd3fffff] page 2M > [ 0.000000] [mem 0xcd400000-0xcd41cfff] page 4k > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] > [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M > [ 0.000000] RAMDISK: [mem 0x3646c000-0x3722dfff] > [ 0.000000] ACPI: RSDP 00000000000f0120 000024 (v02 LENOVO) > [ 0.000000] ACPI: XSDT 00000000daffe170 0000BC (v01 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: FACP 00000000dafe7000 00010C (v05 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: DSDT 00000000dafe9000 010E11 (v01 LENOVO TP-G2 00002510 INTL 20061109) > [ 0.000000] ACPI: FACS 00000000daf5a000 000040 > [ 0.000000] ACPI: TCPA 00000000daffd000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) > [ 0.000000] ACPI: SSDT 00000000daffc000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) > [ 0.000000] ACPI: SSDT 00000000daffb000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) > [ 0.000000] ACPI: SSDT 00000000daffa000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109) > [ 0.000000] ACPI: HPET 00000000dafe5000 000038 (v01 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: APIC 00000000dafe4000 000098 (v01 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: MCFG 00000000dafe3000 00003C (v01 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: ECDT 00000000dafe2000 000052 (v01 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: FPDT 00000000dafe1000 000064 (v01 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: ASF! 00000000dafe8000 0000A5 (v32 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: UEFI 00000000dafe0000 00003E (v01 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: UEFI 00000000dafdf000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) > [ 0.000000] ACPI: MSDM 00000000dafde000 000055 (v03 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: SSDT 00000000dafdd000 000C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) > [ 0.000000] ACPI: SSDT 00000000dafdc000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109) > [ 0.000000] ACPI: DMAR 00000000dafdb000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) > [ 0.000000] ACPI: UEFI 00000000dafda000 0002A6 (v01 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: DBG2 00000000dafd9000 0000E9 (v00 LENOVO TP-G2 00002510 PTL 00000002) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41e5fffff] > [ 0.000000] NODE_DATA [mem 0x41e5ec000-0x41e5f0fff] > [ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040e000000-ffff88041bdfffff] on node 0 > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal [mem 0x100000000-0x41e5fffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] > [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] > [ 0.000000] node 0: [mem 0x20200000-0x40003fff] > [ 0.000000] node 0: [mem 0x40005000-0xcd41cfff] > [ 0.000000] node 0: [mem 0x100000000-0x41e5fffff] > [ 0.000000] On node 0 totalpages: 4110264 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 11432 pages used for memmap > [ 0.000000] DMA32 zone: 836124 pages, LIFO batch:31 > [ 0.000000] Normal zone: 44709 pages used for memmap > [ 0.000000] Normal zone: 3270144 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xcd41d000-0xdae9efff] > [ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff] > [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] > [ 0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] > [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041e200000 s85824 r8192 d20672 u262144 > [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4054046 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 ro quiet > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! > [ 0.000000] Memory: 16121392K/16441056K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 319664K reserved) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. > [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] hpet clockevent registered > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.004000] tsc: Detected 2793.535 MHz processor > [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.07 BogoMIPS (lpj=11174140) > [ 0.000004] pid_max: default: 32768 minimum: 301 > [ 0.000022] Security Framework initialized > [ 0.000025] AppArmor: AppArmor disabled by boot time parameter > [ 0.000026] Yama: disabled by default; enable with sysctl kernel.yama.* > [ 0.000768] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) > [ 0.004242] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) > [ 0.005827] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) > [ 0.005842] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) > [ 0.006023] Initializing cgroup subsys memory > [ 0.006027] Initializing cgroup subsys devices > [ 0.006029] Initializing cgroup subsys freezer > [ 0.006030] Initializing cgroup subsys blkio > [ 0.006031] Initializing cgroup subsys perf_event > [ 0.006050] CPU: Physical Processor ID: 0 > [ 0.006051] CPU: Processor Core ID: 0 > [ 0.006055] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > [ 0.006055] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) > [ 0.006373] mce: CPU supports 7 MCE banks > [ 0.006383] CPU0: Thermal monitoring enabled (TM1) > [ 0.006390] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 > [ 0.006390] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 > [ 0.006390] tlb_flushall_shift: 2 > [ 0.006476] Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000) > [ 0.007366] ACPI: Core revision 20131115 > [ 0.012511] ACPI: All ACPI Tables successfully acquired > [ 0.109376] dmar: Host address width 36 > [ 0.109378] dmar: DRHD base: 0x000000fed90000 flags: 0x0 > [ 0.109383] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a > [ 0.109384] dmar: DRHD base: 0x000000fed91000 flags: 0x1 > [ 0.109387] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a > [ 0.109388] dmar: RMRR base: 0x000000da2ba000 end: 0x000000da2d0fff > [ 0.109389] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff > [ 0.109462] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 > [ 0.109463] HPET id 0 under DRHD base 0xfed91000 > [ 0.109591] Enabled IRQ remapping in x2apic mode > [ 0.109593] Enabling x2apic > [ 0.109594] Enabled x2apic > [ 0.109601] Switched APIC routing to cluster x2apic. > [ 0.110046] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.149777] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09) > [ 0.149786] TSC deadline timer enabled > [ 0.149795] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. > [ 0.149802] ... version: 3 > [ 0.149802] ... bit width: 48 > [ 0.149803] ... generic registers: 4 > [ 0.149804] ... value mask: 0000ffffffffffff > [ 0.149804] ... max period: 0000ffffffffffff > [ 0.149805] ... fixed-purpose events: 3 > [ 0.149806] ... event mask: 000000070000000f > [ 0.150041] x86: Booting SMP configuration: > [ 0.163473] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. > [ 0.150042] .... node #0, CPUs: #1 #2 #3 > [ 0.190362] x86: Booted up 1 node, 4 CPUs > [ 0.190365] smpboot: Total of 4 processors activated (22348.28 BogoMIPS) > [ 0.193089] devtmpfs: initialized > [ 0.195760] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) > [ 0.195909] NET: Registered protocol family 16 > [ 0.195976] cpuidle: using governor ladder > [ 0.195977] cpuidle: using governor menu > [ 0.195995] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > [ 0.195997] ACPI: bus type PCI registered > [ 0.195998] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.196181] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) > [ 0.196184] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 > [ 0.200631] PCI: Using configuration type 1 for base access > [ 0.201166] bio: create slab at 0 > [ 0.201257] ACPI: Added _OSI(Module Device) > [ 0.201258] ACPI: Added _OSI(Processor Device) > [ 0.201259] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.201260] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.202380] ACPI : EC: EC description table is found, configuring boot EC > [ 0.205961] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored > [ 0.241595] ACPI: SSDT 00000000dae3a018 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) > [ 0.241881] ACPI: Dynamic OEM Table Load: > [ 0.241883] ACPI: SSDT (null) 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) > [ 0.253262] ACPI: SSDT 00000000dae3ba98 000303 (v01 PmRef ApIst 00003000 INTL 20061109) > [ 0.253572] ACPI: Dynamic OEM Table Load: > [ 0.253573] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109) > [ 0.262585] ACPI: SSDT 00000000dae39d98 000119 (v01 PmRef ApCst 00003000 INTL 20061109) > [ 0.262863] ACPI: Dynamic OEM Table Load: > [ 0.262864] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) > [ 0.275029] ACPI: Interpreter enabled > [ 0.275033] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) > [ 0.275037] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) > [ 0.275047] ACPI: (supports S0 S3 S4 S5) > [ 0.275049] ACPI: Using IOAPIC for interrupt routing > [ 0.275066] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.275860] ACPI: ACPI Dock Station Driver: 3 docks/bays found > [ 0.289546] ACPI: Power Resource [PUBS] (on) > [ 0.293871] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.293946] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11) > [ 0.294018] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11) > [ 0.294089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.294161] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.294232] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11) > [ 0.294302] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) > [ 0.294373] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) > [ 0.294408] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) > [ 0.294412] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] > [ 0.294500] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] > [ 0.294542] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] > [ 0.294544] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] > [ 0.294546] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] > [ 0.294547] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM > [ 0.294680] PCI host bridge to bus 0000:00 > [ 0.294682] pci_bus 0000:00: root bus resource [bus 00-3f] > [ 0.294684] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > [ 0.294685] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > [ 0.294686] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > [ 0.294688] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff] > [ 0.294689] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] > [ 0.294695] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 > [ 0.294761] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 > [ 0.294770] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] > [ 0.294776] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] > [ 0.294780] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] > [ 0.294857] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 > [ 0.294878] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit] > [ 0.294946] pci 0000:00:14.0: PME# supported from D3hot D3cold > [ 0.294974] pci 0000:00:14.0: System wakeup disabled by ACPI > [ 0.295006] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 > [ 0.295028] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit] > [ 0.295101] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold > [ 0.295156] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 > [ 0.295173] pci 0000:00:16.3: reg 0x10: [io 0x50b0-0x50b7] > [ 0.295183] pci 0000:00:16.3: reg 0x14: [mem 0xf253c000-0xf253cfff] > [ 0.295305] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 > [ 0.295322] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff] > [ 0.295330] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff] > [ 0.295338] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f] > [ 0.295398] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold > [ 0.295425] pci 0000:00:19.0: System wakeup disabled by ACPI > [ 0.295457] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 > [ 0.295477] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff] > [ 0.295564] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold > [ 0.295594] pci 0000:00:1a.0: System wakeup disabled by ACPI > [ 0.295625] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 > [ 0.295639] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit] > [ 0.295703] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.295736] pci 0000:00:1b.0: System wakeup disabled by ACPI > [ 0.295767] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 > [ 0.295897] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.295968] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 > [ 0.296096] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.296169] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 > [ 0.296297] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 0.296338] pci 0000:00:1c.2: System wakeup disabled by ACPI > [ 0.296373] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 > [ 0.296392] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff] > [ 0.296479] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > [ 0.296509] pci 0000:00:1d.0: System wakeup disabled by ACPI > [ 0.296539] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 > [ 0.296686] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 > [ 0.296703] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af] > [ 0.296711] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf] > [ 0.296718] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7] > [ 0.296726] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb] > [ 0.296733] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] > [ 0.296740] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff] > [ 0.296782] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.296830] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 > [ 0.296844] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit] > [ 0.296864] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] > [ 0.297208] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001 > [ 0.297227] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. > [ 0.297254] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff] > [ 0.297457] pci 0000:02:00.0: supports D1 D2 > [ 0.297458] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.305267] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 0.305275] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] > [ 0.305280] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff] > [ 0.305288] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] > [ 0.305513] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 > [ 0.305662] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit] > [ 0.306371] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > [ 0.317352] pci 0000:00:1c.1: PCI bridge to [bus 03] > [ 0.317361] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff] > [ 0.317463] acpiphp: Slot [1] registered > [ 0.317472] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] > [ 0.317478] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] > [ 0.317482] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff] > [ 0.317491] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] > [ 0.318431] ACPI: Enabled 4 GPEs in block 00 to 3F > [ 0.318440] ACPI: \_SB_.PCI0: notify handler is installed > [ 0.318474] Found 1 acpi root devices > [ 0.318524] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 > [ 0.318591] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.318593] vgaarb: loaded > [ 0.318594] vgaarb: bridge control possible 0000:00:02.0 > [ 0.318622] PCI: Using ACPI for IRQ routing > [ 0.320307] PCI: pci_cache_line_size set to 64 bytes > [ 0.320677] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] > [ 0.320678] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] > [ 0.320679] e820: reserve RAM buffer [mem 0xcd41d000-0xcfffffff] > [ 0.320680] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff] > [ 0.320759] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 > [ 0.320762] hpet0: 8 comparators, 64-bit 14.318180 MHz counter > [ 0.322791] Switched to clocksource hpet > [ 0.323949] pnp: PnP ACPI init > [ 0.323958] ACPI: bus type PNP registered > [ 0.324273] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved > [ 0.324275] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved > [ 0.324277] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved > [ 0.324278] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved > [ 0.324280] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved > [ 0.324281] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved > [ 0.324282] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved > [ 0.324284] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved > [ 0.324285] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved > [ 0.324287] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved > [ 0.324288] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved > [ 0.324290] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved > [ 0.324291] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved > [ 0.324293] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved > [ 0.324295] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved > [ 0.324296] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved > [ 0.324298] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved > [ 0.324300] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.324378] system 00:01: [io 0x0400-0x047f] could not be reserved > [ 0.324380] system 00:01: [io 0x0500-0x057f] has been reserved > [ 0.324381] system 00:01: [io 0x0800-0x080f] has been reserved > [ 0.324383] system 00:01: [io 0x15e0-0x15ef] has been reserved > [ 0.324385] system 00:01: [io 0x1600-0x167f] has been reserved > [ 0.324386] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved > [ 0.324388] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved > [ 0.324390] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved > [ 0.324392] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved > [ 0.324393] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved > [ 0.324395] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved > [ 0.324397] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved > [ 0.324399] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.324440] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) > [ 0.324447] pnp 00:03: [dma 4] > [ 0.324458] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) > [ 0.324473] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) > [ 0.324499] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 0.324522] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.324547] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) > [ 0.324569] pnp 00:08: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active) > [ 0.324604] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) > [ 0.325019] pnp: PnP ACPI: found 10 devices > [ 0.325021] ACPI: bus type PNP unregistered > [ 0.331047] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 0.331052] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] > [ 0.331059] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff] > [ 0.331063] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] > [ 0.331071] pci 0000:00:1c.1: PCI bridge to [bus 03] > [ 0.331078] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff] > [ 0.331090] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] > [ 0.331093] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] > [ 0.331099] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff] > [ 0.331104] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] > [ 0.331113] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.331114] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.331116] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.331117] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff] > [ 0.331118] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] > [ 0.331120] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] > [ 0.331121] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff] > [ 0.331122] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] > [ 0.331124] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff] > [ 0.331125] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] > [ 0.331127] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff] > [ 0.331128] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] > [ 0.331180] NET: Registered protocol family 2 > [ 0.331371] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.331567] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.331670] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.331688] TCP: reno registered > [ 0.331702] UDP hash table entries: 8192 (order: 6, 262144 bytes) > [ 0.331747] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) > [ 0.331849] NET: Registered protocol family 1 > [ 0.331860] pci 0000:00:02.0: Boot video device > [ 0.332445] PCI: CLS 64 bytes, default 64 > [ 0.332483] Unpacking initramfs... > [ 0.538228] Freeing initrd memory: 14088K (ffff88003646c000 - ffff88003722e000) > [ 0.538237] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.538239] software IO TLB [mem 0xc941d000-0xcd41d000] (64MB) mapped at [ffff8800c941d000-ffff8800cd41cfff] > [ 0.538415] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x16 > [ 0.538420] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x16 > [ 0.538428] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x16 > [ 0.538435] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x16 > [ 0.538485] microcode: Microcode Update Driver: v2.00 , Peter Oruba > [ 0.538707] audit: initializing netlink socket (disabled) > [ 0.538718] type=2000 audit(1400375135.440:1): initialized > [ 0.550056] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.550732] VFS: Disk quotas dquot_6.5.2 > [ 0.550753] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.550813] msgmni has been set to 31514 > [ 0.551059] alg: No test for stdrng (krng) > [ 0.551091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > [ 0.551126] io scheduler noop registered > [ 0.551127] io scheduler deadline registered > [ 0.551142] io scheduler cfq registered (default) > [ 0.551538] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.551548] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.551570] intel_idle: MWAIT substates: 0x21120 > [ 0.551571] intel_idle: v0.4 model 0x3A > [ 0.551572] intel_idle: lapic_timer_reliable_states 0xffffffff > [ 0.551670] GHES: HEST is not enabled! > [ 0.551710] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.572271] 0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19, base_baud = 115200) is a 16550A > [ 0.572385] Linux agpgart interface v0.103 > [ 0.572446] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 > [ 0.574267] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.574271] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 0.574356] mousedev: PS/2 mouse device common for all mice > [ 0.574394] rtc_cmos 00:06: RTC can wake from S4 > [ 0.574526] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > [ 0.574562] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 0.574570] Intel P-state driver initializing. > [ 0.574578] Intel pstate controlling: cpu 0 > [ 0.574591] Intel pstate controlling: cpu 1 > [ 0.574601] Intel pstate controlling: cpu 2 > [ 0.574609] Intel pstate controlling: cpu 3 > [ 0.574627] AMD IOMMUv2 driver by Joerg Roedel > [ 0.574628] AMD IOMMUv2 functionality not available on this system > [ 0.574715] TCP: cubic registered > [ 0.574779] NET: Registered protocol family 10 > [ 0.574928] mip6: Mobile IPv6 > [ 0.574929] NET: Registered protocol family 17 > [ 0.574931] mpls_gso: MPLS GSO support > [ 0.575125] registered taskstats version 1 > [ 0.575946] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 > [ 0.576065] rtc_cmos 00:06: setting system clock to 2014-05-18 01:05:36 UTC (1400375136) > [ 0.576098] PM: Hibernation image not present or could not be loaded. > [ 0.576577] Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000) > [ 0.576579] Write protecting the kernel read-only data: 8192k > [ 0.578821] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000) > [ 0.579581] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) > [ 0.588054] systemd-udevd[67]: starting version 204 > [ 0.609858] thermal LNXTHERM:00: registered as thermal_zone0 > [ 0.609861] ACPI: Thermal Zone [THM0] (59 C) > [ 0.610577] pps_core: LinuxPPS API ver. 1 registered > [ 0.610579] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti > [ 0.610776] PTP clock support registered > [ 0.611009] ACPI: bus type USB registered > [ 0.611025] usbcore: registered new interface driver usbfs > [ 0.611031] usbcore: registered new interface driver hub > [ 0.611211] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > [ 0.611213] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [ 0.611362] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode > [ 0.611389] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X > [ 0.614478] sdhci: Secure Digital Host Controller Interface driver > [ 0.614481] sdhci: Copyright(c) Pierre Ossman > [ 0.614642] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) > [ 0.615256] usbcore: registered new device driver usb > [ 0.615360] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA > [ 0.615672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.615801] ehci-pci: EHCI PCI platform driver > [ 0.622656] SCSI subsystem initialized > [ 0.623787] libata version 3.00 loaded. > [ 0.808170] e1000e 0000:00:19.0 eth0: registered PHC clock > [ 0.808172] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:70:23:9b > [ 0.808174] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection > [ 0.808221] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF > [ 0.808388] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 0.808395] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 > [ 0.808513] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported > [ 0.808555] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X > [ 0.808668] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 0.808670] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.808672] usb usb1: Product: xHCI Host Controller > [ 0.808673] usb usb1: Manufacturer: Linux 3.13-1-amd64 xhci_hcd > [ 0.808675] usb usb1: SerialNumber: 0000:00:14.0 > [ 0.808788] hub 1-0:1.0: USB hub found > [ 0.808799] hub 1-0:1.0: 4 ports detected > [ 0.809121] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 0.809125] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 > [ 0.809213] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 > [ 0.809214] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.809215] usb usb2: Product: xHCI Host Controller > [ 0.809216] usb usb2: Manufacturer: Linux 3.13-1-amd64 xhci_hcd > [ 0.809217] usb usb2: SerialNumber: 0000:00:14.0 > [ 0.809295] hub 2-0:1.0: USB hub found > [ 0.809313] hub 2-0:1.0: 4 ports detected > [ 0.843536] ehci-pci 0000:00:1a.0: EHCI Host Controller > [ 0.843540] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 > [ 0.843554] ehci-pci 0000:00:1a.0: debug port 2 > [ 0.847464] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported > [ 0.847469] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000 > [ 0.859504] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > [ 0.859657] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > [ 0.859660] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.859661] usb usb3: Product: EHCI Host Controller > [ 0.859662] usb usb3: Manufacturer: Linux 3.13-1-amd64 ehci_hcd > [ 0.859664] usb usb3: SerialNumber: 0000:00:1a.0 > [ 0.859803] hub 3-0:1.0: USB hub found > [ 0.859810] hub 3-0:1.0: 3 ports detected > [ 0.860022] ehci-pci 0000:00:1d.0: EHCI Host Controller > [ 0.860026] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 > [ 0.860040] ehci-pci 0000:00:1d.0: debug port 2 > [ 0.863933] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported > [ 0.863947] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000 > [ 0.875524] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > [ 0.875582] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 > [ 0.875586] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.875590] usb usb4: Product: EHCI Host Controller > [ 0.875592] usb usb4: Manufacturer: Linux 3.13-1-amd64 ehci_hcd > [ 0.875595] usb usb4: SerialNumber: 0000:00:1d.0 > [ 0.875834] hub 4-0:1.0: USB hub found > [ 0.875840] hub 4-0:1.0: 3 ports detected > [ 0.875935] ahci 0000:00:1f.2: version 3.0 > [ 0.876045] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X > [ 0.876074] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled > [ 0.891577] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode > [ 0.891584] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst > [ 0.907987] scsi0 : ahci > [ 0.908087] scsi1 : ahci > [ 0.908155] scsi2 : ahci > [ 0.908219] scsi3 : ahci > [ 0.908283] scsi4 : ahci > [ 0.908332] scsi5 : ahci > [ 0.908357] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 44 > [ 0.908359] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 44 > [ 0.908360] ata3: DUMMY > [ 0.908361] ata4: DUMMY > [ 0.908363] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 44 > [ 0.908363] ata6: DUMMY > [ 1.119858] usb 1-4: new high-speed USB device number 2 using xhci_hcd > [ 1.141293] usb 1-4: New USB device found, idVendor=0bdb, idProduct=1926 > [ 1.141296] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 1.141298] usb 1-4: Product: H5321 gw > [ 1.141299] usb 1-4: Manufacturer: Lenovo > [ 1.141301] usb 1-4: SerialNumber: CD1EA50AF80E50M0 > [ 1.227997] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 1.228985] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded > [ 1.228990] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out > [ 1.229962] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133 > [ 1.229967] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA > [ 1.231047] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded > [ 1.231052] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out > [ 1.231986] ata1.00: configured for UDMA/133 > [ 1.232154] scsi 0:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5 > [ 1.288113] usb 3-1: new high-speed USB device number 2 using ehci-pci > [ 1.421014] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 > [ 1.421019] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 1.421500] hub 3-1:1.0: USB hub found > [ 1.421698] hub 3-1:1.0: 6 ports detected > [ 1.536350] tsc: Refined TSC clocksource calibration: 2793.663 MHz > [ 1.536400] usb 4-1: new high-speed USB device number 2 using ehci-pci > [ 1.552389] ata2: SATA link down (SStatus 0 SControl 300) > [ 1.668969] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 > [ 1.668974] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 1.669257] hub 4-1:1.0: USB hub found > [ 1.669419] hub 4-1:1.0: 8 ports detected > [ 1.740986] usb 3-1.4: new full-speed USB device number 3 using ehci-pci > [ 1.839378] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6 > [ 1.839398] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 1.839400] usb 3-1.4: Product: BCM20702A0 > [ 1.839403] usb 3-1.4: Manufacturer: Broadcom Corp > [ 1.839405] usb 3-1.4: SerialNumber: 7CE9D3EA594F > [ 1.880804] ata5: SATA link down (SStatus 0 SControl 300) > [ 1.887675] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) > [ 1.887682] sd 0:0:0:0: [sda] 4096-byte physical blocks > [ 1.887811] sd 0:0:0:0: [sda] Write Protect is off > [ 1.887816] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.887861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 1.913031] usb 3-1.6: new high-speed USB device number 4 using ehci-pci > [ 1.954431] sda: sda1 sda2 > [ 1.955434] sd 0:0:0:0: [sda] Attached SCSI disk > [ 1.957311] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 2.013419] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2ea > [ 2.013425] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 2.013427] usb 3-1.6: Product: Integrated Camera > [ 2.013430] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd. > [ 2.257200] raid6: sse2x1 6148 MB/s > [ 2.325281] raid6: sse2x2 9421 MB/s > [ 2.393368] raid6: sse2x4 13350 MB/s > [ 2.393369] raid6: using algorithm sse2x4 (13350 MB/s) > [ 2.393370] raid6: using ssse3x2 recovery algorithm > [ 2.393557] xor: automatically using best checksumming function: > [ 2.433412] avx : 26864.000 MB/sec > [ 2.435143] bio: create slab at 1 > [ 2.435305] Btrfs loaded > [ 2.446675] btrfs: device fsid 3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 devid 1 transid 39198 /dev/sda1 > [ 2.448799] btrfs: device fsid 3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 devid 1 transid 39198 /dev/disk/by-uuid/3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 > [ 2.449071] btrfs: disk space caching is enabled > [ 2.537901] Switched to clocksource tsc > [ 4.051737] random: nonblocking pool is initialized > [ 6.878902] systemd-udevd[410]: starting version 204 > [ 8.839880] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt > [ 8.888716] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X > [ 8.917027] [drm] Initialized drm 1.1.0 20060810 > [ 9.009941] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251) > [ 9.009947] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > [ 9.009953] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251) > [ 9.009955] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > [ 9.009956] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251) > [ 9.009958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > [ 9.009959] lpc_ich: Resource conflict(s) found affecting gpio_ich > [ 9.120747] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 > [ 9.120893] ACPI: Lid Switch [LID] > [ 9.120938] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 > [ 9.120943] ACPI: Sleep Button [SLPB] > [ 9.120995] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 > [ 9.120998] ACPI: Power Button [PWRF] > [ 9.136020] cfg80211: Calling CRDA to update world regulatory domain > [ 9.262099] ACPI: AC Adapter [AC] (on-line) > [ 9.346182] [drm] Memory usable by graphics device = 2048M > [ 9.386199] i915 0000:00:02.0: irq 46 for MSI/MSI-X > [ 9.386209] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 9.386210] [drm] Driver supports precise vblank timestamp query. > [ 9.386264] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 9.411136] Intel(R) Wireless WiFi driver for Linux, in-tree: > [ 9.411138] Copyright(c) 2003-2013 Intel Corporation > [ 9.411282] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control > [ 9.411456] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X > [ 9.482836] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78) > [ 9.489681] ACPI: Battery Slot [BAT0] (battery present) > [ 9.510221] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 > [ 9.527649] fbcon: inteldrmfb (fb0) is primary device > [ 9.734948] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode > [ 9.735142] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm > [ 9.766080] Non-volatile memory driver v1.3 > [ 9.836541] thinkpad_acpi: ThinkPad ACPI Extras v0.25 > [ 9.836541] thinkpad_acpi: http://ibm-acpi.sf.net/ > [ 9.836542] thinkpad_acpi: ThinkPad BIOS G2ET91WW (2.51 ), EC unknown > [ 9.836542] thinkpad_acpi: Lenovo ThinkPad X230, model 2306CTO > [ 9.836884] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net > [ 9.837008] thinkpad_acpi: radio switch found; radios are enabled > [ 9.837079] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver > [ 9.837079] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... > [ 9.838160] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked > [ 9.838741] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked > [ 9.838999] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) > [ 9.841354] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 > [ 9.917285] wmi: Mapper loaded > [ 10.025571] input: PC Speaker as /devices/platform/pcspkr/input/input6 > [ 10.370193] Console: switching to colour frame buffer device 170x48 > [ 10.373054] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 10.373056] i915 0000:00:02.0: registered panic notifier > [ 10.442807] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled > [ 10.442813] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled > [ 10.442816] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled > [ 10.442820] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 > [ 10.442970] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S > [ 10.443094] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > [ 10.450249] iTCO_vendor_support: vendor-support=0 > [ 10.477845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 > [ 10.477894] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) > [ 10.478008] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 10.484783] acpi device:01: registered as cooling_device4 > [ 10.484853] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 > [ 10.484958] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > [ 10.485125] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X > [ 10.587008] cdc_wdm 1-4:1.5: cdc-wdm0: USB WDM device > [ 10.587043] cdc_wdm 1-4:1.8: cdc-wdm1: USB WDM device > [ 10.587057] usbcore: registered new interface driver cdc_wdm > [ 10.588714] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' > [ 10.632687] btrfs: device fsid 3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 devid 1 transid 39198 /dev/sda1 > [ 10.676491] cdc_acm 1-4:1.1: ttyACM0: USB ACM device > [ 10.678334] cdc_acm 1-4:1.3: ttyACM1: USB ACM device > [ 10.686458] cdc_acm 1-4:1.9: ttyACM2: USB ACM device > [ 10.694389] usbcore: registered new interface driver cdc_acm > [ 10.694392] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters > [ 10.711660] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 > [ 10.828208] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 > [ 10.828331] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 > [ 10.828405] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 > [ 10.828467] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 > [ 10.828526] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 > [ 10.828585] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 > [ 10.828642] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 > [ 10.841380] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) > [ 10.844222] alg: No test for crc32 (crc32-pclmul) > [ 10.911569] media: Linux media interface: v0.10 > [ 10.924247] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off > [ 11.011571] Linux video capture interface: v2.00 > [ 11.047452] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) > [ 11.049597] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input17 > [ 11.049670] usbcore: registered new interface driver uvcvideo > [ 11.049671] USB Video Class driver (1.1.1) > [ 11.109023] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905 > [ 11.109035] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 > [ 11.127048] cdc_ncm 1-4:1.6: MAC-Address: 02:15:e0:ec:01:00 > [ 11.127193] cdc_ncm 1-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:15:e0:ec:01:00 > [ 11.127214] usbcore: registered new interface driver cdc_ncm > [ 11.133101] usbcore: registered new interface driver cdc_mbim > [ 11.144620] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 > [ 11.188097] btrfs: device fsid 3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 devid 1 transid 39198 /dev/sda1 > [ 11.323218] Bluetooth: Core ver 2.17 > [ 11.323236] NET: Registered protocol family 31 > [ 11.323237] Bluetooth: HCI device and connection manager initialized > [ 11.323244] Bluetooth: HCI socket layer initialized > [ 11.323245] Bluetooth: L2CAP socket layer initialized > [ 11.323251] Bluetooth: SCO socket layer initialized > [ 11.376680] usbcore: registered new interface driver btusb > [ 12.503535] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k > [ 12.575263] btrfs: use lzo compression > [ 12.575266] btrfs: disk space caching is enabled > [ 13.164944] loop: module loaded > [ 13.270612] fuse init (API version 7.22) > [ 13.392930] btrfs: device fsid 3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 devid 1 transid 39198 /dev/sda1 > [ 13.431578] btrfs: device fsid 3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 devid 1 transid 39198 /dev/sda1 > [ 13.648040] btrfs: device fsid 3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 devid 1 transid 39198 /dev/sda1 > [ 13.754744] btrfs: device fsid 3d64a40f-70bb-4d8e-b8b8-8491b0e48b87 devid 1 transid 39198 /dev/sda1 > [ 14.010029] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 > [ 15.240512] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S > [ 15.241655] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 15.309713] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 > [ 15.508913] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input18 > [ 15.511517] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S > [ 15.518387] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 15.609890] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 16.156699] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X > [ 16.258729] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X > [ 16.258978] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 18.956161] wlan0: authenticate with 2c:b0:5d:a6:7d:2e > [ 18.961759] wlan0: send auth to 2c:b0:5d:a6:7d:2e (try 1/3) > [ 18.963919] wlan0: authenticated > [ 18.966013] wlan0: associate with 2c:b0:5d:a6:7d:2e (try 1/3) > [ 18.969667] wlan0: RX AssocResp from 2c:b0:5d:a6:7d:2e (capab=0x411 status=0 aid=2) > [ 18.988891] wlan0: associated > [ 18.988955] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 21.603298] RPC: Registered named UNIX socket transport module. > [ 21.603302] RPC: Registered udp transport module. > [ 21.603304] RPC: Registered tcp transport module. > [ 21.603305] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 21.637697] FS-Cache: Loaded > [ 21.717526] FS-Cache: Netfs 'nfs' registered for caching > [ 21.761694] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > [ 23.185458] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00 > [ 23.185462] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb > [ 23.186404] thinkpad_ec: initial ec test failed > [ 23.986280] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input19 > [ 28.977176] Bridge firewalling registered > [ 28.977734] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready > [ 29.210080] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 29.334977] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 41.817000] systemd-logind[3212]: New seat seat0. > [ 41.834248] systemd-logind[3212]: Watching system buttons on /dev/input/event3 (Power Button) > [ 41.834359] systemd-logind[3212]: Watching system buttons on /dev/input/event6 (Video Bus) > [ 41.834542] systemd-logind[3212]: Watching system buttons on /dev/input/event1 (Lid Switch) > [ 41.834621] systemd-logind[3212]: Watching system buttons on /dev/input/event2 (Sleep Button) > [ 41.834680] systemd-logind[3212]: Watching system buttons on /dev/input/event4 (ThinkPad Extra Buttons) > [ 41.835393] systemd-logind[3212]: New session 1 of user csirac. > [ 41.835501] systemd-logind[3212]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display. > [ 1262.367602] usb 1-1: new high-speed USB device number 3 using xhci_hcd > [ 1262.384794] usb 1-1: New USB device found, idVendor=152d, idProduct=2338 > [ 1262.384800] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 > [ 1262.384802] usb 1-1: Product: USB to ATA/ATAPI bridge > [ 1262.384805] usb 1-1: Manufacturer: JMicron > [ 1262.384807] usb 1-1: SerialNumber: 11218EAD1161 > [ 1262.436465] usb-storage 1-1:1.0: USB Mass Storage device detected > [ 1262.436558] scsi6 : usb-storage 1-1:1.0 > [ 1262.436640] usbcore: registered new interface driver usb-storage > [ 1263.437562] scsi 6:0:0:0: Direct-Access Samsung SSD 840 PRO Seri PQ: 0 ANSI: 2 CCS > [ 1263.438017] sd 6:0:0:0: Attached scsi generic sg1 type 0 > [ 1263.438642] sd 6:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/476 GiB) > [ 1263.438958] sd 6:0:0:0: [sdb] Write Protect is off > [ 1263.438964] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00 > [ 1263.439320] sd 6:0:0:0: [sdb] No Caching mode page found > [ 1263.439324] sd 6:0:0:0: [sdb] Assuming drive cache: write through > [ 1263.440458] sd 6:0:0:0: [sdb] No Caching mode page found > [ 1263.440463] sd 6:0:0:0: [sdb] Assuming drive cache: write through > [ 1263.446242] sdb: sdb1 sdb2 sdb3 > [ 1263.447312] sd 6:0:0:0: [sdb] No Caching mode page found > [ 1263.447316] sd 6:0:0:0: [sdb] Assuming drive cache: write through > [ 1263.447318] sd 6:0:0:0: [sdb] Attached SCSI disk > [ 1263.555672] btrfs: device label weatherwax 0 devid 1 transid 504075 /dev/sdb3 > [ 1263.558031] btrfs: device label weatherwax 0 devid 1 transid 504075 /dev/sdb3