From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: david@fromorbit.com, darrick.wong@oracle.com
Cc: linux-btrfs@vger.kernel.org, Christoph Hellwig <hch@lst.de>,
fstests@vger.kernel.org, xfs@oss.sgi.com
Subject: [PATCH 14/23] reflink: high offset reflink and dedupe tests
Date: Mon, 08 Feb 2016 17:13:16 -0800 [thread overview]
Message-ID: <20160209011316.23099.62123.stgit@birch.djwong.org> (raw)
In-Reply-To: <20160209011145.23099.95354.stgit@birch.djwong.org>
Ensure that we can pass absurdly enormous offsets and lengths to
reflink/dedupe and it'll survive.
v2: Ask for dedupe in the dedupe test.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[hch@lst.de: call _require_test_dedupe]
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
tests/generic/303 | 99 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/303.out | 21 ++++++++++
tests/generic/304 | 100 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/304.out | 22 +++++++++++
tests/generic/group | 2 +
5 files changed, 244 insertions(+)
create mode 100755 tests/generic/303
create mode 100644 tests/generic/303.out
create mode 100755 tests/generic/304
create mode 100644 tests/generic/304.out
diff --git a/tests/generic/303 b/tests/generic/303
new file mode 100755
index 0000000..c337483
--- /dev/null
+++ b/tests/generic/303
@@ -0,0 +1,99 @@
+#! /bin/bash
+# FS QA Test No. 303
+#
+# Check that high-offset reflinks work.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$testdir"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+testdir="$TEST_DIR/test-$seq"
+rm -rf "$testdir"
+mkdir "$testdir"
+
+echo "Create the original files"
+bigoff=9223372036854775806
+len=9223372036854775807
+bigoff_64k=9223372036854710272 # bigoff rounded down to 64k
+"$XFS_IO_PROG" -f -c "truncate $len" "$testdir/file0" >> "$seqres.full"
+test -s "$testdir/file0" || _notrun "High offset ftruncate failed"
+_pwrite_byte 0x61 $bigoff 1 "$testdir/file1" >> "$seqres.full"
+_pwrite_byte 0x61 1048575 1 "$testdir/file2" >> "$seqres.full"
+
+echo "Reflink large single byte file"
+_cp_reflink "$testdir/file1" "$testdir/file3" >> "$seqres.full"
+
+echo "Reflink large empty file"
+_cp_reflink "$testdir/file0" "$testdir/file4" >> "$seqres.full"
+
+echo "Reflink past maximum file size in dest file (should fail)"
+_reflink_range "$testdir/file1" 0 "$testdir/file5" 4611686018427322368 $len >> "$seqres.full"
+
+echo "Reflink high offset to low offset"
+_reflink_range "$testdir/file1" $bigoff_64k "$testdir/file6" 1048576 65535 >> "$seqres.full"
+
+echo "Reflink past source file EOF (should fail)"
+_reflink_range "$testdir/file2" 524288 "$testdir/file7" 0 1048576 >> "$seqres.full"
+
+echo "Reflink max size at nonzero offset (should fail)"
+_reflink_range "$testdir/file2" 524288 "$testdir/file8" 0 $len >> "$seqres.full"
+
+echo "Reflink with huge off/len (should fail)"
+_reflink_range "$testdir/file2" $bigoff_64k "$testdir/file9" 0 $bigoff_64k >> "$seqres.full"
+
+echo "Check file creation"
+_test_remount
+echo "file3"
+"$XFS_IO_PROG" -c "pread -v -q $bigoff 1" "$testdir/file3"
+echo "file4"
+"$XFS_IO_PROG" -c "pread -v -q $bigoff 1" "$testdir/file4"
+# file5 should fail above
+echo "file6"
+"$XFS_IO_PROG" -c "pread -v -q 1114110 1" "$testdir/file6"
+# file7 should fail above
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/303.out b/tests/generic/303.out
new file mode 100644
index 0000000..39a8803
--- /dev/null
+++ b/tests/generic/303.out
@@ -0,0 +1,21 @@
+QA output created by 303
+Format and mount
+Create the original files
+Reflink large single byte file
+Reflink large empty file
+Reflink past maximum file size in dest file (should fail)
+XFS_IOC_CLONE_RANGE: Invalid argument
+Reflink high offset to low offset
+Reflink past source file EOF (should fail)
+XFS_IOC_CLONE_RANGE: Invalid argument
+Reflink max size at nonzero offset (should fail)
+XFS_IOC_CLONE_RANGE: Invalid argument
+Reflink with huge off/len (should fail)
+XFS_IOC_CLONE_RANGE: Invalid argument
+Check file creation
+file3
+7ffffffffffffffe: 61 a
+file4
+7ffffffffffffffe: 00 .
+file6
+0010fffe: 61 a
diff --git a/tests/generic/304 b/tests/generic/304
new file mode 100755
index 0000000..443ed21
--- /dev/null
+++ b/tests/generic/304
@@ -0,0 +1,100 @@
+#! /bin/bash
+# FS QA Test No. 304
+#
+# Check that high-offset dedupes work.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$testdir"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_dedupe
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+testdir="$TEST_DIR/test-$seq"
+rm -rf "$testdir"
+mkdir "$testdir"
+
+echo "Create the original files"
+bigoff=9223372036854775806
+len=9223372036854775807
+bigoff_64k=9223372036854710272 # bigoff rounded down to 64k
+"$XFS_IO_PROG" -f -c "truncate $len" "$testdir/file0" >> "$seqres.full"
+test -s "$testdir/file0" || _notrun "High offset ftruncate failed"
+_pwrite_byte 0x61 $bigoff 1 "$testdir/file1" >> "$seqres.full"
+_pwrite_byte 0x61 $bigoff 1 "$testdir/file3" >> "$seqres.full"
+_pwrite_byte 0x61 1048575 1 "$testdir/file2" >> "$seqres.full"
+
+echo "Dedupe large single byte file"
+_dedupe_range "$testdir/file1" 0 "$testdir/file3" 0 $len >> "$seqres.full"
+
+echo "Dedupe large empty file"
+_dedupe_range "$testdir/file0" 0 "$testdir/file4" 0 $len >> "$seqres.full"
+
+echo "Dedupe past maximum file size in dest file (should fail)"
+_dedupe_range "$testdir/file1" 0 "$testdir/file5" 4611686018427322368 $len >> "$seqres.full"
+
+echo "Dedupe high offset to low offset"
+_dedupe_range "$testdir/file1" $bigoff_64k "$testdir/file6" 1048576 65535 >> "$seqres.full"
+
+echo "Dedupe past source file EOF (should fail)"
+_dedupe_range "$testdir/file2" 524288 "$testdir/file7" 0 1048576 >> "$seqres.full"
+
+echo "Dedupe max size at nonzero offset (should fail)"
+_dedupe_range "$testdir/file2" 524288 "$testdir/file8" 0 $len >> "$seqres.full"
+
+echo "Dedupe with huge off/len (should fail)"
+_dedupe_range "$testdir/file2" $bigoff_64k "$testdir/file9" 0 $bigoff_64k >> "$seqres.full"
+
+echo "Check file creation"
+_test_remount
+echo "file3"
+"$XFS_IO_PROG" -c "pread -v -q $bigoff 1" "$testdir/file3"
+echo "file4"
+"$XFS_IO_PROG" -c "pread -v -q $bigoff 1" "$testdir/file4"
+# file5 should fail above
+echo "file6"
+"$XFS_IO_PROG" -c "pread -v -q 1114110 1" "$testdir/file6"
+# file7 should fail above
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/304.out b/tests/generic/304.out
new file mode 100644
index 0000000..4af2a39
--- /dev/null
+++ b/tests/generic/304.out
@@ -0,0 +1,22 @@
+QA output created by 304
+Format and mount
+Create the original files
+Dedupe large single byte file
+dedupe: Invalid argument
+Dedupe large empty file
+dedupe: Invalid argument
+Dedupe past maximum file size in dest file (should fail)
+dedupe: Invalid argument
+Dedupe high offset to low offset
+dedupe: Extents did not match.
+Dedupe past source file EOF (should fail)
+dedupe: Invalid argument
+Dedupe max size at nonzero offset (should fail)
+dedupe: Invalid argument
+Dedupe with huge off/len (should fail)
+XFS_IOC_FILE_EXTENT_SAME: Invalid argument
+Check file creation
+file3
+7ffffffffffffffe: 61 a
+file4
+file6
diff --git a/tests/generic/group b/tests/generic/group
index 7e1ea72..3229dad 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -305,6 +305,8 @@
300 auto aio enospc preallocrw stress
301 auto quick clone
302 auto quick clone
+303 auto quick clone
+304 auto quick clone
306 auto quick rw
307 auto quick
308 auto quick
next prev parent reply other threads:[~2016-02-09 1:13 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 1:11 [PATCH v4.1 00/23] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls Darrick J. Wong
2016-02-09 1:11 ` [PATCH 01/23] generic/182: this is a dedupe test, check for dedupe Darrick J. Wong
2016-02-09 1:11 ` [PATCH 02/23] xfstests: filter whitespace in 128 and 132 Darrick J. Wong
2016-02-09 1:12 ` [PATCH 03/23] xfstests: make _scratch_mkfs_blocksized usable Darrick J. Wong
2016-02-09 1:12 ` [PATCH 04/23] reflink: remove redundant filesystem checks from the end of the tests Darrick J. Wong
2016-02-09 1:12 ` [PATCH 05/23] common/dmerror: add some more dmerror routines Darrick J. Wong
2016-02-09 1:12 ` [PATCH 06/23] dio unwritten conversion bug tests Darrick J. Wong
2016-02-09 7:37 ` Dave Chinner
2016-02-09 8:08 ` Darrick J. Wong
2016-02-09 1:12 ` [PATCH 07/23] reflink: test intersecting CoW and falloc/fpunch/fzero/fcollapse/finsert/ftrunc Darrick J. Wong
2016-02-09 1:12 ` [PATCH 08/23] reflink: test CoW behavior with IO errors Darrick J. Wong
2016-02-09 1:12 ` [PATCH 09/23] reflink: test CoW operations against the source file Darrick J. Wong
2016-02-09 1:12 ` [PATCH 10/23] xfs: more reflink tests Darrick J. Wong
2016-02-09 7:36 ` Dave Chinner
2016-02-09 8:16 ` Darrick J. Wong
2016-02-09 1:12 ` [PATCH 11/23] reflink: ensure that we can handle reflinking a lot of extents Darrick J. Wong
2016-02-09 1:13 ` [PATCH 12/23] xfs/122: support refcount/rmap data structures Darrick J. Wong
2016-02-09 7:43 ` Dave Chinner
2016-02-09 7:55 ` Darrick J. Wong
2016-02-09 8:53 ` Dave Chinner
2016-02-09 1:13 ` [PATCH 13/23] xfs: test fragmentation characteristics of copy-on-write Darrick J. Wong
2016-02-09 8:01 ` Dave Chinner
2016-02-10 1:02 ` Darrick J. Wong
2016-02-09 1:13 ` Darrick J. Wong [this message]
2016-02-09 1:13 ` [PATCH 15/23] reflink: test xfs cow behavior when the filesystem crashes Darrick J. Wong
2016-02-09 1:13 ` [PATCH 16/23] reflink: test quota accounting Darrick J. Wong
2016-02-09 1:13 ` [PATCH 17/23] reflink: test CoW across a mixed range of block types with cowextsize set Darrick J. Wong
2016-02-09 8:09 ` Dave Chinner
2016-02-10 1:03 ` Darrick J. Wong
2016-02-09 1:13 ` [PATCH 18/23] xfs: test the automatic cowextsize extent garbage collector Darrick J. Wong
2016-02-09 8:15 ` Dave Chinner
2016-02-10 1:06 ` Darrick J. Wong
2016-02-09 1:13 ` [PATCH 19/23] xfs: test rmapbt functionality Darrick J. Wong
2016-02-09 8:26 ` Dave Chinner
2016-02-10 1:07 ` Darrick J. Wong
2016-02-09 1:13 ` [PATCH 20/23] reflink: test aio copy on write Darrick J. Wong
2016-02-09 1:14 ` [PATCH 21/23] xfs: aio cow tests Darrick J. Wong
2016-02-09 8:32 ` Dave Chinner
2016-02-09 21:51 ` Darrick J. Wong
2016-02-09 1:14 ` [PATCH 22/23] xfs: test xfs_getbmapx behavior with shared extents Darrick J. Wong
2016-02-09 1:14 ` [PATCH 23/23] reflink: test reflink+cow+enospc all at the same time Darrick J. Wong
2016-02-09 7:21 ` [PATCH v4.1 00/23] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls Dave Chinner
2016-02-09 7:25 ` Darrick J. Wong
2016-02-09 7:50 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160209011316.23099.62123.stgit@birch.djwong.org \
--to=darrick.wong@oracle.com \
--cc=david@fromorbit.com \
--cc=fstests@vger.kernel.org \
--cc=hch@lst.de \
--cc=linux-btrfs@vger.kernel.org \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).