From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: david@fromorbit.com, darrick.wong@oracle.com
Cc: linux-btrfs@vger.kernel.org, fstests@vger.kernel.org, xfs@oss.sgi.com
Subject: [PATCH 22/23] xfs: test xfs_getbmapx behavior with shared extents
Date: Mon, 08 Feb 2016 17:14:08 -0800 [thread overview]
Message-ID: <20160209011408.23099.85443.stgit@birch.djwong.org> (raw)
In-Reply-To: <20160209011145.23099.95354.stgit@birch.djwong.org>
Make sure that xfs_getbmapx behaves properly w.r.t. shared extents
and CoW fork reporting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
common/xfs | 19 ++++++
tests/xfs/243 | 169 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/243.out | 27 ++++++++
tests/xfs/245 | 99 +++++++++++++++++++++++++++++++
tests/xfs/245.out | 13 ++++
tests/xfs/group | 2 +
6 files changed, 329 insertions(+)
create mode 100755 tests/xfs/243
create mode 100644 tests/xfs/243.out
create mode 100755 tests/xfs/245
create mode 100644 tests/xfs/245.out
diff --git a/common/xfs b/common/xfs
index 2d1a76f..91b7916 100644
--- a/common/xfs
+++ b/common/xfs
@@ -42,3 +42,22 @@ _require_xfs_scratch_rmapbt()
fi
_scratch_unmount
}
+
+_xfs_bmapx_find() {
+ case "$1" in
+ "attr")
+ param="a"
+ ;;
+ "cow")
+ param="c"
+ ;;
+ *)
+ param="e"
+ ;;
+ esac
+ shift
+ file="$1"
+ shift
+
+ "$XFS_IO_PROG" -c "bmap -${param}lpv" "$file" | grep -c "$@"
+}
diff --git a/tests/xfs/243 b/tests/xfs/243
new file mode 100755
index 0000000..a97e87e
--- /dev/null
+++ b/tests/xfs/243
@@ -0,0 +1,169 @@
+#! /bin/bash
+# FS QA Test No. 243
+#
+# Ensuring that copy on write in buffered mode works when the CoW
+# range originally covers multiple extents, some unwritten, some not.
+# - Set cowextsize hint.
+# - Create a file with the following repeating sequence of blocks:
+# 1. reflinked
+# 2. unwritten
+# 3. hole
+# 4. regular block
+# 5. delalloc
+# - CoW across the halfway mark, starting with the unwritten extent.
+# - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+. ./common/xfs
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+_require_xfs_io_command "fpunch"
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+testdir="$SCRATCH_MNT/test-$seq"
+rm -rf $testdir
+mkdir $testdir
+
+echo "Create the original files"
+blksz=65536
+nr=64
+real_blksz=$(stat -f -c '%S' "$testdir")
+internal_blks=$((blksz * nr / real_blksz))
+"$XFS_IO_PROG" -c "cowextsize $((blksz * 16))" "$testdir" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((blksz * nr)) "$testdir/file1" >> "$seqres.full"
+$XFS_IO_PROG -f -c "truncate $((blksz * nr))" "$testdir/file3" >> "$seqres.full"
+# 0 blocks are reflinked
+seq 0 5 $nr | while read f; do
+ _reflink_range "$testdir/file1" $((blksz * f)) "$testdir/file3" $((blksz * f)) $blksz >> "$seqres.full"
+ _pwrite_byte 0x61 $((blksz * f)) $blksz "$testdir/file3.chk" >> "$seqres.full"
+done
+# 1 blocks are unwritten
+seq 1 5 $nr | while read f; do
+ $XFS_IO_PROG -f -c "falloc $((blksz * f)) $blksz" "$testdir/file3" >> "$seqres.full"
+ _pwrite_byte 0x00 $((blksz * f)) $blksz "$testdir/file3.chk" >> "$seqres.full"
+done
+# 2 blocks are holes
+seq 2 5 $nr | while read f; do
+ _pwrite_byte 0x00 $((blksz * f)) $blksz "$testdir/file3.chk" >> "$seqres.full"
+done
+# 3 blocks are regular
+seq 3 5 $nr | while read f; do
+ _pwrite_byte 0x71 $((blksz * f)) $blksz "$testdir/file3" >> "$seqres.full"
+ _pwrite_byte 0x71 $((blksz * f)) $blksz "$testdir/file3.chk" >> "$seqres.full"
+done
+sync
+# 4 blocks are delalloc (do later)
+seq 4 5 $nr | while read f; do
+ _pwrite_byte 0x62 $((blksz * f)) $blksz "$testdir/file3" >> "$seqres.full"
+ _pwrite_byte 0x62 $((blksz * f)) $blksz "$testdir/file3.chk" >> "$seqres.full"
+done
+
+# 10 blocks are cow'd
+seq 0 10 $((nr/2)) | while read f; do
+ _pwrite_byte 0x61 $((blksz * f)) 1 "$testdir/file3" >> "$seqres.full"
+ _pwrite_byte 0x61 $((blksz * f)) 1 "$testdir/file3.chk" >> "$seqres.full"
+done
+
+echo "Compare files"
+md5sum "$testdir/file1" | _filter_scratch
+md5sum "$testdir/file3" | _filter_scratch
+md5sum "$testdir/file3.chk" | _filter_scratch
+
+echo "Dump extents"
+"$XFS_IO_PROG" -c "cowextsize" "$testdir/file3" | _filter_scratch
+echo "Delayed allocation CoW extents:"
+test $(_xfs_bmapx_find cow "$testdir/file3" delalloc) -gt 0 || \
+ echo "Expected to find a delalloc CoW extent"
+echo "Shared data extents:"
+test $(_xfs_bmapx_find data "$testdir/file3" '100000$') -gt 0 || \
+ echo "Expected to find a shared data extent"
+echo "Unwritten data extents:"
+test $(_xfs_bmapx_find data "$testdir/file3" '10000$') -gt 0 || \
+ echo "Expected to find an unwritten data extent"
+echo "Hole data extents:"
+test $(_xfs_bmapx_find data "$testdir/file3" hole) -gt 0 || \
+ echo "Expected to find a hole data extent"
+echo "Regular data extents:"
+test $(_xfs_bmapx_find data "$testdir/file3" '000000$') -gt 0 || \
+ echo "Expected to find a regular data extent"
+
+sync
+
+echo "Dump extents after sync"
+"$XFS_IO_PROG" -c "cowextsize" "$testdir/file3" | _filter_scratch
+echo "Delayed allocation CoW extents:"
+test $(_xfs_bmapx_find cow "$testdir/file3" -v hole ) -gt 0 || \
+ echo "Expected to find a regular CoW extent"
+echo "Real CoW extents:"
+test $(_xfs_bmapx_find cow "$testdir/file3" delalloc ) -eq 0 || \
+ echo "Expected to find zero delalloc CoW extent"
+echo "Shared data extents:"
+test $(_xfs_bmapx_find data "$testdir/file3" '100000$') -gt 0 || \
+ echo "Expected to find a shared data extent"
+echo "Unwritten data extents:"
+test $(_xfs_bmapx_find data "$testdir/file3" '10000$') -gt 0 || \
+ echo "Expected to find an unwritten data extent"
+echo "Hole data extents:"
+test $(_xfs_bmapx_find data "$testdir/file3" hole) -gt 0 || \
+ echo "Expected to find a hole data extent"
+echo "Regular data extents:"
+test $(_xfs_bmapx_find data "$testdir/file3" '000000$') -gt 0 || \
+ echo "Expected to find a regular data extent"
+
+_scratch_remount
+
+echo "Compare files"
+md5sum "$testdir/file1" | _filter_scratch
+md5sum "$testdir/file3" | _filter_scratch
+md5sum "$testdir/file3.chk" | _filter_scratch
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/243.out b/tests/xfs/243.out
new file mode 100644
index 0000000..0390be7
--- /dev/null
+++ b/tests/xfs/243.out
@@ -0,0 +1,27 @@
+QA output created by 243
+Format and mount
+Create the original files
+Compare files
+bdbcf02ee0aa977795a79d25fcfdccb1 SCRATCH_MNT/test-243/file1
+d0fda5bf5d4fd70904ef1c1c56db28d0 SCRATCH_MNT/test-243/file3
+d0fda5bf5d4fd70904ef1c1c56db28d0 SCRATCH_MNT/test-243/file3.chk
+Dump extents
+[1048576] SCRATCH_MNT/test-243/file3
+Delayed allocation CoW extents:
+Shared data extents:
+Unwritten data extents:
+Hole data extents:
+Regular data extents:
+Dump extents after sync
+[1048576] SCRATCH_MNT/test-243/file3
+Delayed allocation CoW extents:
+Real CoW extents:
+Shared data extents:
+Unwritten data extents:
+Hole data extents:
+Regular data extents:
+Compare files
+bdbcf02ee0aa977795a79d25fcfdccb1 SCRATCH_MNT/test-243/file1
+d0fda5bf5d4fd70904ef1c1c56db28d0 SCRATCH_MNT/test-243/file3
+d0fda5bf5d4fd70904ef1c1c56db28d0 SCRATCH_MNT/test-243/file3.chk
+Check for damage
diff --git a/tests/xfs/245 b/tests/xfs/245
new file mode 100755
index 0000000..8da1abe
--- /dev/null
+++ b/tests/xfs/245
@@ -0,0 +1,99 @@
+#! /bin/bash
+# FS QA Test No. 245
+#
+# Make sure that reflink deals with extents going beyond EOF.
+# - fallocate 256k in file1
+# - pwrite 252-257k to cause it to speculatively prealloc file1
+# - reflink file1 to file2
+# - compare file[12]
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+. ./common/xfs
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+testdir="$SCRATCH_MNT/test-$seq"
+rm -rf $testdir
+mkdir $testdir
+
+echo "Create the original files"
+"$XFS_IO_PROG" -f -c "falloc 0 256k" -c "pwrite 252k 6k" "$testdir/file1" >> "$seqres.full"
+_scratch_remount
+_cp_reflink "$testdir/file1" "$testdir/file2" >> "$seqres.full"
+
+echo "Compare files"
+md5sum "$testdir/file1" | _filter_scratch
+md5sum "$testdir/file2" | _filter_scratch
+
+echo "Unwritten data extents"
+test $(_xfs_bmapx_find data "$testdir/file1" '10000$') -gt 0 || \
+ echo "Expected to find an unwritten file1 extent"
+echo "Shared data extents"
+test $(_xfs_bmapx_find data "$testdir/file1" '100000$') -gt 0 || \
+ echo "Expected to find a shared data extent"
+
+echo "Hole data extents"
+test $(_xfs_bmapx_find data "$testdir/file2" 'hole') -gt 0 || \
+ echo "Expected to find a hole data extent"
+echo "Shared data extents"
+test $(_xfs_bmapx_find data "$testdir/file2" '100000$') -gt 0 || \
+ echo "Expected to find a shared data extent"
+
+echo "Hole cow extents"
+test $(_xfs_bmapx_find cow "$testdir/file1" 'hole') -gt 0 || \
+ echo "Expected to find a hole cow extent"
+echo "Hole cow extents"
+test $(_xfs_bmapx_find cow "$testdir/file2" 'hole') -gt 0 || \
+ echo "Expected to find a hole cow extent"
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/245.out b/tests/xfs/245.out
new file mode 100644
index 0000000..92a2cbe
--- /dev/null
+++ b/tests/xfs/245.out
@@ -0,0 +1,13 @@
+QA output created by 245
+Format and mount
+Create the original files
+Compare files
+b0b91e1a18165fcd6549f2f5f3ef4823 SCRATCH_MNT/test-245/file1
+b0b91e1a18165fcd6549f2f5f3ef4823 SCRATCH_MNT/test-245/file2
+Unwritten data extents
+Shared data extents
+Hole data extents
+Shared data extents
+Hole cow extents
+Hole cow extents
+Check for damage
diff --git a/tests/xfs/group b/tests/xfs/group
index c0ce1f4..23fc180 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -240,7 +240,9 @@
240 auto quick clone
241 auto quick clone
242 auto quick prealloc
+243 auto quick clone
244 auto quota quick
+245 auto quick clone
250 auto quick rw prealloc metadata
252 auto quick prealloc
253 auto quick
next prev parent reply other threads:[~2016-02-09 1:14 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 1:11 [PATCH v4.1 00/23] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls Darrick J. Wong
2016-02-09 1:11 ` [PATCH 01/23] generic/182: this is a dedupe test, check for dedupe Darrick J. Wong
2016-02-09 1:11 ` [PATCH 02/23] xfstests: filter whitespace in 128 and 132 Darrick J. Wong
2016-02-09 1:12 ` [PATCH 03/23] xfstests: make _scratch_mkfs_blocksized usable Darrick J. Wong
2016-02-09 1:12 ` [PATCH 04/23] reflink: remove redundant filesystem checks from the end of the tests Darrick J. Wong
2016-02-09 1:12 ` [PATCH 05/23] common/dmerror: add some more dmerror routines Darrick J. Wong
2016-02-09 1:12 ` [PATCH 06/23] dio unwritten conversion bug tests Darrick J. Wong
2016-02-09 7:37 ` Dave Chinner
2016-02-09 8:08 ` Darrick J. Wong
2016-02-09 1:12 ` [PATCH 07/23] reflink: test intersecting CoW and falloc/fpunch/fzero/fcollapse/finsert/ftrunc Darrick J. Wong
2016-02-09 1:12 ` [PATCH 08/23] reflink: test CoW behavior with IO errors Darrick J. Wong
2016-02-09 1:12 ` [PATCH 09/23] reflink: test CoW operations against the source file Darrick J. Wong
2016-02-09 1:12 ` [PATCH 10/23] xfs: more reflink tests Darrick J. Wong
2016-02-09 7:36 ` Dave Chinner
2016-02-09 8:16 ` Darrick J. Wong
2016-02-09 1:12 ` [PATCH 11/23] reflink: ensure that we can handle reflinking a lot of extents Darrick J. Wong
2016-02-09 1:13 ` [PATCH 12/23] xfs/122: support refcount/rmap data structures Darrick J. Wong
2016-02-09 7:43 ` Dave Chinner
2016-02-09 7:55 ` Darrick J. Wong
2016-02-09 8:53 ` Dave Chinner
2016-02-09 1:13 ` [PATCH 13/23] xfs: test fragmentation characteristics of copy-on-write Darrick J. Wong
2016-02-09 8:01 ` Dave Chinner
2016-02-10 1:02 ` Darrick J. Wong
2016-02-09 1:13 ` [PATCH 14/23] reflink: high offset reflink and dedupe tests Darrick J. Wong
2016-02-09 1:13 ` [PATCH 15/23] reflink: test xfs cow behavior when the filesystem crashes Darrick J. Wong
2016-02-09 1:13 ` [PATCH 16/23] reflink: test quota accounting Darrick J. Wong
2016-02-09 1:13 ` [PATCH 17/23] reflink: test CoW across a mixed range of block types with cowextsize set Darrick J. Wong
2016-02-09 8:09 ` Dave Chinner
2016-02-10 1:03 ` Darrick J. Wong
2016-02-09 1:13 ` [PATCH 18/23] xfs: test the automatic cowextsize extent garbage collector Darrick J. Wong
2016-02-09 8:15 ` Dave Chinner
2016-02-10 1:06 ` Darrick J. Wong
2016-02-09 1:13 ` [PATCH 19/23] xfs: test rmapbt functionality Darrick J. Wong
2016-02-09 8:26 ` Dave Chinner
2016-02-10 1:07 ` Darrick J. Wong
2016-02-09 1:13 ` [PATCH 20/23] reflink: test aio copy on write Darrick J. Wong
2016-02-09 1:14 ` [PATCH 21/23] xfs: aio cow tests Darrick J. Wong
2016-02-09 8:32 ` Dave Chinner
2016-02-09 21:51 ` Darrick J. Wong
2016-02-09 1:14 ` Darrick J. Wong [this message]
2016-02-09 1:14 ` [PATCH 23/23] reflink: test reflink+cow+enospc all at the same time Darrick J. Wong
2016-02-09 7:21 ` [PATCH v4.1 00/23] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls Dave Chinner
2016-02-09 7:25 ` Darrick J. Wong
2016-02-09 7:50 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160209011408.23099.85443.stgit@birch.djwong.org \
--to=darrick.wong@oracle.com \
--cc=david@fromorbit.com \
--cc=fstests@vger.kernel.org \
--cc=linux-btrfs@vger.kernel.org \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).