From: Liu Bo <bo.li.liu@oracle.com>
To: takafumi-sslab <takafumi.kubota1012@sslab.ics.keio.ac.jp>
Cc: linux-btrfs@vger.kernel.org
Subject: Re: [PATCH] Btrfs: add another missing end_page_writeback on submit_extent_page failure
Date: Mon, 6 Feb 2017 08:26:54 -0800 [thread overview]
Message-ID: <20170206162654.GA15505@localhost.localdomain> (raw)
In-Reply-To: <fe79b315-196c-b981-5151-9c8cc1901632@sslab.ics.keio.ac.jp>
On Mon, Feb 06, 2017 at 02:50:18PM +0900, takafumi-sslab wrote:
>
>
> On 2017/02/06 12:35, Liu Bo wrote:
> > a) __extent_writepage has handled the case when nr == 0.
>
> Yes, I agree this.
>
> > b) when nr == 1, the page is marked with writeback bit and added into a
> > bio, thus we have bio_end to deal with page bits.
>
> However, I don't think this is always correct,
> because, as I said before as the Error A, when (bio_ret == NULL or *bio_ret
> == NULL) and btrfs_bio_alloc() fails, the page is not added into a bio.
> Thus, bio_end does not deal with the page's bit, and the writeback bit
> remains with nr == 1.
>
> To confirm this, I inject a fault to mimic the fail of btrfs_bio_alloc().
> I can reproduce the hang at the kernel ver4.10-rc7 that commit id is
> d5adbfcd5f7bcc6fa58a41c5c5ada0e5c826ce2c
> and Ftrace log messages are like below
>
> a.out-2867 : __extent_writepage: call __extent_writepage_io:
> page:0xffffea000006d200(writeback:0), nr:0, logged at just previous to line
> 3523 of extent_io.c
> a.out-2867 : __extent_writepage_io: call submit_extent_page:
> page:0xffffea000006d200(writeback:1), nr:0, bio_ret:0xffffc90003bd7d40,
> *bio_ret: (null), logged at just previous to line 3443 of extent_io.c
> a.out-2867 : submit_extent_page.isra.53: Mimic Error A: btrfs_bio_alloc()
> fails and submit_extent_page() return -ENOMEM, logged at just previous to
> line 2807 of extent_io.c
> a.out-2867 : __extent_writepage_io: after call submit_extent_page:
> page:0xffffea000006d200(writeback:1), nr:0, bio_ret:0xffffc90003bd7d40,
> *bio_ret: (null), logged at just next to line 3447 of extent_io.c
> a.out-2867 : __extent_writepage_io: nr == 1:
> page:0xffffea000006d200(writeback:1), nr:1, bio_ret:0xffffc90003de7d40,
> logged at just next to line 3456 of extent_io.c //nr == 1 and the writeback
> bit remains
> a.out-2867 : __extent_writepage: after call __extent_writepage_io:
> page:0xffffea000006d200(writeback:1), nr:1, logged at just next to line 3524
> of extent_io.c // __extent_writepage does not handle, because nr == 1
> ...
> sync-2868 : __filemap_fdatawait_range: wait_on_page_writeback:
> page:0xffffea000006d200, logged at just previous to line 404 of mm/filemap.c
> // Then, sync hangs
Thanks for the efforts to prove it, nice. Obviously I missed that @nr
will even be bumped up by one if ENOMEM, so yes, we need to clear the
writeback bit.
But shouldn't @nr means nr_submitted_successfully? If a submit fails,
it makes no senses to keep submitting subsequent parts.
Anyway, for now I think the proposed fix is good to solve the problem, so you
may add
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Thanks,
-liubo
>
> Sincerely,
>
> -takafumi
> >
> > So I don't think the patch is necessary for now.
> >
> > But as I said, the fact (nr == 0 or 1) would be changed if the
> > subpagesize blocksize is supported.
> >
> > Thanks,
> >
> > -liubo
> >
> > > Sincerely,
> > >
> > > -takafumi
> > > > Thanks,
> > > >
> > > > -liubo
> > > > > Sincerely,
> > > > >
> > > > > On 2017/01/31 5:09, Liu Bo wrote:
> > > > > > On Fri, Jan 13, 2017 at 03:12:31PM +0900, takafumi-sslab wrote:
> > > > > > > Thanks for your replying.
> > > > > > >
> > > > > > > I understand this bug is more complicated than I expected.
> > > > > > > I classify error cases under submit_extent_page() below
> > > > > > >
> > > > > > > A: ENOMEM error at btrfs_bio_alloc() in submit_extent_page()
> > > > > > > I first assumed this case and sent the mail.
> > > > > > > When bio_ret is NULL, submit_extent_page() calls btrfs_bio_alloc().
> > > > > > > Then, btrfs_bio_alloc() may fail and submit_extent_page() returns -ENOMEM.
> > > > > > > In this case, bio_endio() is not called and the page's writeback bit
> > > > > > > remains.
> > > > > > > So, there is a need to call end_page_writeback() in the error handling.
> > > > > > >
> > > > > > > B: errors under submit_one_bio() of submit_extent_page()
> > > > > > > Errors that occur under submit_one_bio() handles at bio_endio(), and
> > > > > > > bio_endio() would call end_page_writeback().
> > > > > > >
> > > > > > > Therefore, as you mentioned in the last mail, simply adding
> > > > > > > end_page_writeback() like my last email and commit 55e3bd2e0c2e1 can
> > > > > > > conflict in the case of B.
> > > > > > > To avoid such conflict, one easy solution is adding PageWriteback() check
> > > > > > > too.
> > > > > > >
> > > > > > > How do you think of this solution?
> > > > > > (sorry for the late reply.)
> > > > > >
> > > > > > I think its caller, "__extent_writepage", has covered the above case
> > > > > > by setting page writeback again.
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > -liubo
> > > > > > > Sincerely,
> > > > > > >
> > > > > > > On 2016/12/22 15:20, Liu Bo wrote:
> > > > > > > > On Fri, Dec 16, 2016 at 03:41:50PM +0900, Takafumi Kubota wrote:
> > > > > > > > > This is actually inspired by Filipe's patch(55e3bd2e0c2e1).
> > > > > > > > >
> > > > > > > > > When submit_extent_page() in __extent_writepage_io() fails,
> > > > > > > > > Btrfs misses clearing a writeback bit of the failed page.
> > > > > > > > > This causes the false under-writeback page.
> > > > > > > > > Then, another sync task hangs in filemap_fdatawait_range(),
> > > > > > > > > because it waits the false under-writeback page.
> > > > > > > > >
> > > > > > > > > CPU0 CPU1
> > > > > > > > >
> > > > > > > > > __extent_writepage_io()
> > > > > > > > > ret = submit_extent_page() // fail
> > > > > > > > >
> > > > > > > > > if (ret)
> > > > > > > > > SetPageError(page)
> > > > > > > > > // miss clearing the writeback bit
> > > > > > > > >
> > > > > > > > > sync()
> > > > > > > > > ...
> > > > > > > > > filemap_fdatawait_range()
> > > > > > > > > wait_on_page_writeback(page);
> > > > > > > > > // wait the false under-writeback page
> > > > > > > > >
> > > > > > > > > Signed-off-by: Takafumi Kubota <takafumi.kubota1012@sslab.ics.keio.ac.jp>
> > > > > > > > > ---
> > > > > > > > > fs/btrfs/extent_io.c | 4 +++-
> > > > > > > > > 1 file changed, 3 insertions(+), 1 deletion(-)
> > > > > > > > >
> > > > > > > > > diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
> > > > > > > > > index 1e67723..ef9793b 100644
> > > > > > > > > --- a/fs/btrfs/extent_io.c
> > > > > > > > > +++ b/fs/btrfs/extent_io.c
> > > > > > > > > @@ -3443,8 +3443,10 @@ static noinline_for_stack int __extent_writepage_io(struct inode *inode,
> > > > > > > > > bdev->bio, max_nr,
> > > > > > > > > end_bio_extent_writepage,
> > > > > > > > > 0, 0, 0, false);
> > > > > > > > > - if (ret)
> > > > > > > > > + if (ret) {
> > > > > > > > > SetPageError(page);
> > > > > > > > > + end_page_writeback(page);
> > > > > > > > > + }
> > > > > > > > OK...this could be complex as we don't know which part in
> > > > > > > > submit_extent_page gets the error, if the page has been added into bio
> > > > > > > > and bio_end would call end_page_writepage(page) as well, so whichever
> > > > > > > > comes later, the BUG() in end_page_writeback() would complain.
> > > > > > > >
> > > > > > > > Looks like commit 55e3bd2e0c2e1 also has the same problem although I
> > > > > > > > gave it my reviewed-by.
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > >
> > > > > > > > -liubo
> > > > > > > >
> > > > > > > > > cur = cur + iosize;
> > > > > > > > > pg_offset += iosize;
> > > > > > > > > --
> > > > > > > > > 1.9.3
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
> > > > > > > > > the body of a message to majordomo@vger.kernel.org
> > > > > > > > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > > > > > --
> > > > > > > Keio University
> > > > > > > System Software Laboratory
> > > > > > > Takafumi Kubota
> > > > > > > takafumi.kubota1012@sslab.ics.keio.jp
> > > > > > >
> > > > > --
> > > > > Keio University
> > > > > System Software Laboratory
> > > > > Takafumi Kubota
> > > > > takafumi.kubota1012@sslab.ics.keio.jp
> > > > >
> > > --
> > > Keio University
> > > System Software Laboratory
> > > Takafumi Kubota
> > > takafumi.kubota1012@sslab.ics.keio.jp
> > >
>
> --
> Keio University
> System Software Laboratory
> Takafumi Kubota
> takafumi.kubota1012@sslab.ics.keio.jp
>
next prev parent reply other threads:[~2017-02-06 16:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-16 6:41 [PATCH] Btrfs: add another missing end_page_writeback on submit_extent_page failure Takafumi Kubota
2016-12-22 6:20 ` Liu Bo
2017-01-13 6:12 ` takafumi-sslab
2017-01-30 20:09 ` Liu Bo
2017-02-01 3:27 ` takafumi-sslab
2017-02-01 16:19 ` Liu Bo
2017-02-04 12:42 ` takafumi-sslab
2017-02-06 3:35 ` Liu Bo
2017-02-06 5:50 ` takafumi-sslab
2017-02-06 16:26 ` Liu Bo [this message]
2017-02-06 16:34 ` Liu Bo
2017-02-07 11:09 ` takafumi-sslab
2017-02-07 20:14 ` Liu Bo
2017-02-08 18:30 ` David Sterba
2017-02-06 9:36 ` takafumi-sslab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170206162654.GA15505@localhost.localdomain \
--to=bo.li.liu@oracle.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=takafumi.kubota1012@sslab.ics.keio.ac.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).