From: Anand Jain <anand.jain@oracle.com>
To: linux-btrfs@vger.kernel.org
Cc: dsterba@suse.cz
Subject: [PATCH 4/4 v3] btrfs: add compression trace points
Date: Sun, 13 Aug 2017 12:02:44 +0800 [thread overview]
Message-ID: <20170813040244.18841-5-anand.jain@oracle.com> (raw)
In-Reply-To: <20170813040244.18841-1-anand.jain@oracle.com>
From: Anand Jain <Anand.Jain@oracle.com>
This patch adds compression and decompression trace points for the
purpose of debugging.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
---
v3:
. Rename to a simple names, without worrying about being
compatible with the future naming.
. The type was not working fixed it.
v2:
. Use better naming.
(If transform is not good enough I have run out of ideas, pls suggest).
. To be applied on top of
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux.git for-next
(tested without namelen check patch set)
fs/btrfs/compression.c | 11 +++++++++++
include/trace/events/btrfs.h | 39 +++++++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+)
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index d2ef9ac2a630..4a652f67ee87 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -895,6 +895,10 @@ int btrfs_compress_pages(int type, struct address_space *mapping,
start, pages,
out_pages,
total_in, total_out);
+
+ trace_btrfs_compress(1, 1, mapping->host, type, *total_in,
+ *total_out, start, ret);
+
free_workspace(type, workspace);
return ret;
}
@@ -921,6 +925,10 @@ static int btrfs_decompress_bio(struct compressed_bio *cb)
workspace = find_workspace(type);
ret = btrfs_compress_op[type - 1]->decompress_bio(workspace, cb);
+
+ trace_btrfs_compress(0, 0, cb->inode, type,
+ cb->compressed_len, cb->len, cb->start, ret);
+
free_workspace(type, workspace);
return ret;
@@ -943,6 +951,9 @@ int btrfs_decompress(int type, unsigned char *data_in, struct page *dest_page,
dest_page, start_byte,
srclen, destlen);
+ trace_btrfs_compress(0, 1, dest_page->mapping->host,
+ type, srclen, destlen, start_byte, ret);
+
free_workspace(type, workspace);
return ret;
}
diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h
index d412c49f5a6a..db33d6649d12 100644
--- a/include/trace/events/btrfs.h
+++ b/include/trace/events/btrfs.h
@@ -1629,6 +1629,45 @@ TRACE_EVENT(qgroup_meta_reserve,
show_root_type(__entry->refroot), __entry->diff)
);
+TRACE_EVENT(btrfs_compress,
+
+ TP_PROTO(int compress, int page, struct inode *inode,
+ unsigned int type,
+ unsigned long len_before, unsigned long len_after,
+ unsigned long start, int ret),
+
+ TP_ARGS(compress, page, inode, type, len_before,
+ len_after, start, ret),
+
+ TP_STRUCT__entry_btrfs(
+ __field(int, compress)
+ __field(int, page)
+ __field(ino_t, i_ino)
+ __field(unsigned int, type)
+ __field(unsigned long, len_before)
+ __field(unsigned long, len_after)
+ __field(unsigned long, start)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign_btrfs(btrfs_sb(inode->i_sb),
+ __entry->compress = compress;
+ __entry->page = page;
+ __entry->i_ino = inode->i_ino;
+ __entry->type = type;
+ __entry->len_before = len_before;
+ __entry->len_after = len_after;
+ __entry->start = start;
+ __entry->ret = ret;
+ ),
+
+ TP_printk_btrfs("%s %s ino=%lu type=%s len_before=%lu len_after=%lu start=%lu ret=%d",
+ __entry->compress ? "compress":"uncompress",
+ __entry->page ? "page":"bio", __entry->i_ino,
+ show_compress_type(__entry->type),
+ __entry->len_before, __entry->len_after, __entry->start,
+ __entry->ret)
+);
#endif /* _TRACE_BTRFS_H */
/* This part must be outside protection */
--
2.13.1
next prev parent reply other threads:[~2017-08-13 3:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-13 4:02 [PATCH 0/4] misc compression tracing related patches Anand Jain
2017-08-13 4:02 ` [PATCH 1/4] btrfs: remove unused BTRFS_COMPRESS_LAST Anand Jain
2017-08-16 13:57 ` David Sterba
2017-08-13 4:02 ` [PATCH 2/4] btrfs: convert enum btrfs_compression_type to define Anand Jain
2017-08-16 13:59 ` David Sterba
2017-08-16 20:33 ` Anand Jain
2017-08-17 11:57 ` David Sterba
2017-08-30 14:38 ` Anand Jain
2017-09-07 18:52 ` David Sterba
2017-08-13 4:02 ` [PATCH 3/4] btrfs: decode compress type for tracing Anand Jain
2017-08-16 14:03 ` David Sterba
2017-08-13 4:02 ` Anand Jain [this message]
2017-08-15 21:09 ` [PATCH 4/4 v3] btrfs: add compression trace points kbuild test robot
2017-08-16 14:38 ` David Sterba
2017-08-16 21:24 ` [PATCH 4/4 v4] " Anand Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170813040244.18841-5-anand.jain@oracle.com \
--to=anand.jain@oracle.com \
--cc=dsterba@suse.cz \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).