linux-btrfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: fdmanana@kernel.org
To: linux-btrfs@vger.kernel.org
Subject: [PATCH 1/2] Btrfs: fix log replay failure after linking special file and fsync
Date: Wed, 28 Feb 2018 15:55:40 +0000	[thread overview]
Message-ID: <20180228155540.5766-1-fdmanana@kernel.org> (raw)

From: Filipe Manana <fdmanana@suse.com>

If in the same transaction we rename a special file (fifo, character/block
device or symbolic link), create a hard link for it having its old name
then sync the log, we will end up with a log that can not be replayed and
at when attempting to replay it, an EEXIST error is returned and mounting
the filesystem fails. Example scenario:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ mkdir /mnt/testdir
  $ mkfifo /mnt/testdir/foo
  # Make sure everything done so far is durably persisted.
  $ sync

  # Create some unrelated file and fsync it, this is just to create a log
  # tree. The file must be in the same directory as our special file.
  $ touch /mnt/testdir/f1
  $ xfs_io -c "fsync" /mnt/testdir/f1

  # Rename our special file and then create a hard link with its old name.
  $ mv /mnt/testdir/foo /mnt/testdir/bar
  $ ln /mnt/testdir/bar /mnt/testdir/foo

  # Create some other unrelated file and fsync it, this is just to persist
  # the log tree which was modified by the previous rename and link
  # operations. Alternatively we could have modified file f1 and fsync it.
  $ touch /mnt/f2
  $ xfs_io -c "fsync" /mnt/f2

  <power failure>

  $ mount /dev/sdc /mnt
  mount: mount /dev/sdc on /mnt failed: File exists

This happens because when both the log tree and the subvolume's tree have
an entry in the directory "testdir" with the same name, that is, there
is one key (258 INODE_REF 257) in the subvolume tree and another one in
the log tree (where 258 is the inode number of our special file and 257
is the inode for directory "testdir"). Only the data of those two keys
differs, in the subvolume tree the index field for inode reference has
a value of 3 while the log tree it has a value of 5. Because the same key
exists in both trees, but have different index, the log replay fails with
an -EEXIST error when attempting to replay the inode reference from the
log tree.

Fix this by setting the last_unlink_trans field of the inode (our special
file) to the current transaction id when a hard link is created, as this
forces logging the parent directory inode, solving the conflict at log
replay time.

A new generic test case for fstests was also submitted.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---
 fs/btrfs/tree-log.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 28d0de199b05..411a022489e4 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -5841,7 +5841,7 @@ int btrfs_log_new_name(struct btrfs_trans_handle *trans,
 	 * this will force the logging code to walk the dentry chain
 	 * up for the file
 	 */
-	if (S_ISREG(inode->vfs_inode.i_mode))
+	if (!S_ISDIR(inode->vfs_inode.i_mode))
 		inode->last_unlink_trans = trans->transid;
 
 	/*
-- 
2.11.0


             reply	other threads:[~2018-02-28 15:55 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-28 15:55 fdmanana [this message]
2018-03-02 17:40 ` [PATCH 1/2] Btrfs: fix log replay failure after linking special file and fsync Liu Bo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180228155540.5766-1-fdmanana@kernel.org \
    --to=fdmanana@kernel.org \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).