From: fdmanana@kernel.org
To: fstests@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org, Filipe Manana <fdmanana@suse.com>
Subject: [PATCH 4/4] fsx: move range generation logic into a common helper
Date: Wed, 8 Apr 2020 11:36:27 +0100 [thread overview]
Message-ID: <20200408103627.11514-1-fdmanana@kernel.org> (raw)
From: Filipe Manana <fdmanana@suse.com>
We have very similar code that generates the destination range for clone,
dedupe and copy_file_range operations, so avoid duplicating the code three
times and move it into a helper function.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
---
ltp/fsx.c | 91 +++++++++++++++++++++++++--------------------------------------
1 file changed, 36 insertions(+), 55 deletions(-)
diff --git a/ltp/fsx.c b/ltp/fsx.c
index 89a5f60e..8873cd01 100644
--- a/ltp/fsx.c
+++ b/ltp/fsx.c
@@ -1930,6 +1930,36 @@ range_overlaps(
return llabs((unsigned long long)off1 - off0) < size;
}
+static void generate_dest_range(unsigned long op,
+ unsigned long max_range_end,
+ unsigned long *src_offset,
+ unsigned long *size,
+ unsigned long *dst_offset)
+{
+ int tries = 0;
+
+ TRIM_OFF_LEN(*src_offset, *size, file_size);
+ if (op == OP_COPY_RANGE) {
+ *src_offset -= *src_offset % readbdy;
+ if (o_direct)
+ *size -= *size % readbdy;
+ } else {
+ *src_offset = *src_offset & ~(block_size - 1);
+ *size = *size & ~(block_size - 1);
+ }
+
+ do {
+ if (tries++ >= 30) {
+ *size = 0;
+ break;
+ }
+ *dst_offset = random();
+ TRIM_OFF(*dst_offset, max_range_end);
+ *dst_offset = *dst_offset & ~(block_size - 1);
+ } while (range_overlaps(*src_offset, *dst_offset, *size) ||
+ *dst_offset + *size > max_range_end);
+}
+
int
test(void)
{
@@ -2004,63 +2034,14 @@ test(void)
keep_size = random() % 2;
break;
case OP_CLONE_RANGE:
- {
- int tries = 0;
-
- TRIM_OFF_LEN(offset, size, file_size);
- offset = offset & ~(block_size - 1);
- size = size & ~(block_size - 1);
- do {
- if (tries++ >= 30) {
- size = 0;
- break;
- }
- offset2 = random();
- TRIM_OFF(offset2, maxfilelen);
- offset2 = offset2 & ~(block_size - 1);
- } while (range_overlaps(offset, offset2, size) ||
- offset2 + size > maxfilelen);
- break;
- }
+ generate_dest_range(op, maxfilelen, &offset, &size, &offset2);
+ break;
case OP_DEDUPE_RANGE:
- {
- int tries = 0;
-
- TRIM_OFF_LEN(offset, size, file_size);
- offset = offset & ~(block_size - 1);
- size = size & ~(block_size - 1);
- do {
- if (tries++ >= 30) {
- size = 0;
- break;
- }
- offset2 = random();
- TRIM_OFF(offset2, file_size);
- offset2 = offset2 & ~(block_size - 1);
- } while (range_overlaps(offset, offset2, size) ||
- offset2 + size > file_size);
- break;
- }
+ generate_dest_range(op, file_size, &offset, &size, &offset2);
+ break;
case OP_COPY_RANGE:
- {
- int tries = 0;
-
- TRIM_OFF_LEN(offset, size, file_size);
- offset -= offset % readbdy;
- if (o_direct)
- size -= size % readbdy;
- do {
- if (tries++ >= 30) {
- size = 0;
- break;
- }
- offset2 = random();
- TRIM_OFF(offset2, maxfilelen);
- offset2 -= offset2 % writebdy;
- } while (range_overlaps(offset, offset2, size) ||
- offset2 + size > maxfilelen);
- break;
- }
+ generate_dest_range(op, maxfilelen, &offset, &size, &offset2);
+ break;
}
have_op:
--
2.11.0
next reply other threads:[~2020-04-08 10:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-08 10:36 fdmanana [this message]
2020-04-08 15:48 ` [PATCH 4/4] fsx: move range generation logic into a common helper Darrick J. Wong
2020-04-08 16:57 ` Filipe Manana
2020-04-08 17:22 ` Darrick J. Wong
2020-04-08 18:12 ` [PATCH v2 " fdmanana
2020-04-17 17:10 ` Brian Foster
2020-04-17 17:20 ` Filipe Manana
2020-04-17 17:32 ` [PATCH " fdmanana
2020-04-20 14:33 ` Brian Foster
2020-04-20 17:05 ` Filipe Manana
-- strict thread matches above, loose matches on Subject: below --
2020-04-20 17:09 fdmanana
2020-04-21 14:22 ` Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200408103627.11514-1-fdmanana@kernel.org \
--to=fdmanana@kernel.org \
--cc=fdmanana@suse.com \
--cc=fstests@vger.kernel.org \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).