* BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
@ 2021-03-12 7:47 Thomas
2021-03-13 6:59 ` Chris Murphy
2021-03-13 7:21 ` Wang Yugui
0 siblings, 2 replies; 8+ messages in thread
From: Thomas @ 2021-03-12 7:47 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 4364 bytes --]
Hello,
I have observed this error messages in systemd journal:
BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033,
flush 0, corrupt 6, gen 0
Here are the bottom lines of journalctl -xb:
är 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=524288, want=497859712,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=524288, want=497859840,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=256, want=497859704,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=256, want=497859720,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=524288, want=497859968,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719034, flush 0, corrupt 6, gen 0
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=256, want=497859728,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=256, want=497859712,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719035, flush 0, corrupt 6, gen 0
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=524288, want=497860096,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719036, flush 0, corrupt 6, gen 0
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=256, want=497859736,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
sdb1: rw=256, want=497859848,
limit=496091703
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719037, flush 0, corrupt 6, gen 0
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719038, flush 0, corrupt 6, gen 0
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719039, flush 0, corrupt 6, gen 0
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719040, flush 0, corrupt 6, gen 0
Mär 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
/dev/sdb1 errs: wr 2702175, rd 2719041, flush 0, corrupt 6, gen 0
I have configured a multidrive setup with 2 identical SSDs.
[root@pc1-desktop ~]# uname -a
Linux pc1-desktop 5.10.22-2-lts #1 SMP Wed, 10 Mar 2021 10:30:57 +0000
x86_64 GNU/Linux
[root@pc1-desktop ~]# btrfs --version
btrfs-progs v5.11
[root@pc1-desktop ~]# btrfs fi show
Label: 'archlinux' uuid: 78462a70-55ad-4444-9d91-e71e42cce51c
Total devices 2 FS bytes used 178.93GiB
devid 1 size 236.55GiB used 233.50GiB path /dev/sda1
devid 2 size 238.47GiB used 233.50GiB path /dev/sdb1
Label: 'backup' uuid: de094dc0-58b7-4931-b948-4b920495bf94
Total devices 1 FS bytes used 210.97GiB
devid 1 size 232.89GiB used 228.87GiB path /dev/sdd
[root@pc1-desktop ~]# btrfs fi df /
Data, RAID1: total=229.47GiB, used=175.82GiB
System, RAID1: total=32.00MiB, used=64.00KiB
Metadata, RAID1: total=4.00GiB, used=3.11GiB
GlobalReserve, single: total=512.00MiB, used=0.00B
Can you please advise how to fix these errors?
Regards
Thomas
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 125299 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0x70a, date = 2010-09-29
[ 0.000000] Linux version 5.10.22-2-lts (linux-lts@archlinux) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Wed, 10 Mar 2021 10:30:57 +0000
[ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts root=UUID=78462a70-55ad-4444-9d91-e71e42cce51c rw rootflags=subvol=@ loglevel=3
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS4/P35-DS4, BIOS F15b 12/22/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2833.366 MHz processor
[ 0.003264] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.003268] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.003273] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.003278] MTRR default type: uncachable
[ 0.003279] MTRR fixed ranges enabled:
[ 0.003281] 00000-9FFFF write-back
[ 0.003282] A0000-BFFFF uncachable
[ 0.003283] C0000-CDFFF write-protect
[ 0.003284] CE000-EFFFF uncachable
[ 0.003285] F0000-FFFFF write-through
[ 0.003286] MTRR variable ranges enabled:
[ 0.003288] 0 base 000000000 mask F00000000 write-back
[ 0.003289] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.003290] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.003292] 3 base 100000000 mask F00000000 write-back
[ 0.003293] 4 base 200000000 mask FC0000000 write-back
[ 0.003294] 5 base 230000000 mask FF0000000 uncachable
[ 0.003295] 6 base 0CFF00000 mask FFFF00000 uncachable
[ 0.003296] 7 disabled
[ 0.004656] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.004843] total RAM covered: 8191M
[ 0.005191] Found optimal setting for mtrr clean up
[ 0.005193] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 0G
[ 0.006510] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[ 0.006518] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.011544] found SMP MP-table at [mem 0x000f5030-0x000f503f]
[ 0.020541] check: Scanning 1 areas for low memory corruption
[ 0.020834] RAMDISK: [mem 0x36027000-0x3700afff]
[ 0.020843] ACPI: Early table checksum verification disabled
[ 0.020848] ACPI: RSDP 0x00000000000F6A20 000014 (v00 GBT )
[ 0.020852] ACPI: RSDT 0x00000000CFEE3040 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.020859] ACPI: FACP 0x00000000CFEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.020866] ACPI: DSDT 0x00000000CFEE3180 004B2A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.020870] ACPI: FACS 0x00000000CFEE0000 000040
[ 0.020874] ACPI: HPET 0x00000000CFEE7E00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.020878] ACPI: MCFG 0x00000000CFEE7E80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.020882] ACPI: APIC 0x00000000CFEE7D00 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.020887] ACPI: SSDT 0x00000000CFEE87E0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.020897] ACPI: Local APIC address 0xfee00000
[ 0.020939] No NUMA configuration found
[ 0.020940] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[ 0.020944] NODE_DATA(0) allocated [mem 0x22fff8000-0x22fffbfff]
[ 0.070183] Zone ranges:
[ 0.070186] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.070189] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.070191] Normal [mem 0x0000000100000000-0x000000022fffffff]
[ 0.070193] Device empty
[ 0.070194] Movable zone start for each node
[ 0.070195] Early memory node ranges
[ 0.070197] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.070198] node 0: [mem 0x0000000000100000-0x00000000cfedffff]
[ 0.070200] node 0: [mem 0x0000000100000000-0x000000022fffffff]
[ 0.070216] Zeroed struct page in unavailable ranges: 388 pages
[ 0.070218] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[ 0.070220] On node 0 totalpages: 2096764
[ 0.070222] DMA zone: 64 pages used for memmap
[ 0.070223] DMA zone: 21 pages reserved
[ 0.070224] DMA zone: 3996 pages, LIFO batch:0
[ 0.070324] DMA32 zone: 13244 pages used for memmap
[ 0.070325] DMA32 zone: 847584 pages, LIFO batch:63
[ 0.090952] Normal zone: 19456 pages used for memmap
[ 0.090954] Normal zone: 1245184 pages, LIFO batch:63
[ 0.121419] ACPI: PM-Timer IO Port: 0x408
[ 0.121421] ACPI: Local APIC address 0xfee00000
[ 0.121431] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.121432] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.121433] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.121434] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.121446] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.121448] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.121450] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.121452] ACPI: IRQ0 used by override.
[ 0.121453] ACPI: IRQ9 used by override.
[ 0.121455] Using ACPI (MADT) for SMP configuration information
[ 0.121457] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.121464] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.121481] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.121483] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.121484] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.121485] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.121487] PM: hibernation: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
[ 0.121488] PM: hibernation: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
[ 0.121488] PM: hibernation: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
[ 0.121489] PM: hibernation: Registered nosave memory: [mem 0xcff00000-0xefffffff]
[ 0.121490] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.121491] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[ 0.121492] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.121494] [mem 0xcff00000-0xefffffff] available for PCI devices
[ 0.121495] Booting paravirtualized kernel on bare hardware
[ 0.121500] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.127714] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.128301] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288
[ 0.128307] pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152
[ 0.128308] pcpu-alloc: [0] 0 1 2 3
[ 0.128335] Built 1 zonelists, mobility grouping on. Total pages: 2063979
[ 0.128336] Policy zone: Normal
[ 0.128338] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts root=UUID=78462a70-55ad-4444-9d91-e71e42cce51c rw rootflags=subvol=@ loglevel=3
[ 0.130059] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.130985] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.131043] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.204585] Memory: 8121232K/8387056K available (14344K kernel code, 2031K rwdata, 8820K rodata, 1772K init, 4284K bss, 265564K reserved, 0K cma-reserved)
[ 0.204598] random: get_random_u64 called from __kmem_cache_create+0x26/0x520 with crng_init=0
[ 0.204749] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.204768] Kernel/User page tables isolation: enabled
[ 0.204794] ftrace: allocating 41667 entries in 163 pages
[ 0.220242] ftrace: allocated 163 pages with 4 groups
[ 0.220431] rcu: Hierarchical RCU implementation.
[ 0.220433] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.220434] Rude variant of Tasks RCU enabled.
[ 0.220435] Tracing variant of Tasks RCU enabled.
[ 0.220436] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.220437] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.224789] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[ 0.225038] Console: colour dummy device 80x25
[ 0.225051] printk: console [tty0] enabled
[ 0.225075] ACPI: Core revision 20200925
[ 0.225823] hpet: Config register invalid. Disabling HPET
[ 0.225852] APIC: Switch to symmetric I/O mode setup
[ 0.226204] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.275839] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28d76054f1c, max_idle_ns: 440795235282 ns
[ 0.275843] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.73 BogoMIPS (lpj=28333660)
[ 0.275846] pid_max: default: 32768 minimum: 301
[ 0.275870] LSM: Security Framework initializing
[ 0.275876] Yama: becoming mindful.
[ 0.275885] LSM support for eBPF active
[ 0.275938] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.275976] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.276284] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.276287] process: using mwait in idle threads
[ 0.276291] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.276292] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.276294] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.276296] Spectre V2 : Mitigation: Full generic retpoline
[ 0.276297] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.276298] Speculative Store Bypass: Vulnerable
[ 0.276300] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.276475] Freeing SMP alternatives memory: 36K
[ 0.400670] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0x7)
[ 0.400851] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.400860] ... version: 2
[ 0.400861] ... bit width: 40
[ 0.400862] ... generic registers: 2
[ 0.400863] ... value mask: 000000ffffffffff
[ 0.400864] ... max period: 000000007fffffff
[ 0.400865] ... fixed-purpose events: 3
[ 0.400866] ... event mask: 0000000700000003
[ 0.400986] rcu: Hierarchical SRCU implementation.
[ 0.401562] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.401633] smp: Bringing up secondary CPUs ...
[ 0.401780] x86: Booting SMP configuration:
[ 0.401781] .... node #0, CPUs: #1 #2 #3
[ 0.417887] smp: Brought up 1 node, 4 CPUs
[ 0.417887] smpboot: Max logical packages: 1
[ 0.417887] smpboot: Total of 4 processors activated (22666.92 BogoMIPS)
[ 0.426455] devtmpfs: initialized
[ 0.426455] x86/mm: Memory block size: 128MB
[ 0.426697] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[ 0.426697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.426697] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.426697] pinctrl core: initialized pinctrl subsystem
[ 0.426697] PM: RTC time: 06:18:44, date: 2021-03-12
[ 0.426697] NET: Registered protocol family 16
[ 0.426697] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.426697] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.426772] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.426783] audit: initializing netlink subsys (disabled)
[ 0.426793] audit: type=2000 audit(1615529923.210:1): state=initialized audit_enabled=0 res=1
[ 0.426793] thermal_sys: Registered thermal governor 'fair_share'
[ 0.426793] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.426793] thermal_sys: Registered thermal governor 'step_wise'
[ 0.426793] thermal_sys: Registered thermal governor 'user_space'
[ 0.426793] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.426793] cpuidle: using governor ladder
[ 0.426793] cpuidle: using governor menu
[ 0.426793] ACPI: bus type PCI registered
[ 0.426793] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.426793] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.426793] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.426793] PCI: Using configuration type 1 for base access
[ 0.427594] Kprobes globally optimized
[ 0.427600] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.427600] ACPI: Added _OSI(Module Device)
[ 0.427600] ACPI: Added _OSI(Processor Device)
[ 0.427600] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.427600] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.427600] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.427600] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.427600] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.429727] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.432884] ACPI: Dynamic OEM Table Load:
[ 0.432890] ACPI: SSDT 0xFFFF99F4C098A400 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.433310] ACPI: Dynamic OEM Table Load:
[ 0.433315] ACPI: SSDT 0xFFFF99F4C0B53A00 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.433689] ACPI: Dynamic OEM Table Load:
[ 0.433693] ACPI: SSDT 0xFFFF99F4C0B53600 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.434069] ACPI: Dynamic OEM Table Load:
[ 0.434073] ACPI: SSDT 0xFFFF99F4C0B52E00 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.434626] ACPI: Interpreter enabled
[ 0.434646] ACPI: (supports S0 S1 S4 S5)
[ 0.434647] ACPI: Using IOAPIC for interrupt routing
[ 0.434672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.434862] ACPI: Enabled 11 GPEs in block 00 to 3F
[ 0.441031] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.441037] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.441338] PCI host bridge to bus 0000:00
[ 0.441341] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.441342] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.441344] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.441345] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.441347] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window]
[ 0.441348] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.441361] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.441477] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.441512] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.441625] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.441659] pci 0000:00:1a.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.441804] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.441837] pci 0000:00:1a.1: reg 0x20: [io 0xe100-0xe11f]
[ 0.441981] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.442014] pci 0000:00:1a.2: reg 0x20: [io 0xe500-0xe51f]
[ 0.442158] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.442172] pci 0000:00:1a.7: reg 0x10: [mem 0xf9305000-0xf93053ff]
[ 0.442348] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.442362] pci 0000:00:1b.0: reg 0x10: [mem 0xf9300000-0xf9303fff 64bit]
[ 0.442425] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.442553] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.442619] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.442750] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.442816] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.442943] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.443009] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.443136] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.443170] pci 0000:00:1d.0: reg 0x20: [io 0xe200-0xe21f]
[ 0.443310] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.443344] pci 0000:00:1d.1: reg 0x20: [io 0xe300-0xe31f]
[ 0.443484] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.443518] pci 0000:00:1d.2: reg 0x20: [io 0xe400-0xe41f]
[ 0.443663] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.443677] pci 0000:00:1d.7: reg 0x10: [mem 0xf9304000-0xf93043ff]
[ 0.443849] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.444012] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.444082] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.444087] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.444091] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.444094] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.444096] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.444239] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.444249] pci 0000:00:1f.2: reg 0x10: [io 0xe600-0xe607]
[ 0.444255] pci 0000:00:1f.2: reg 0x14: [io 0xe700-0xe703]
[ 0.444261] pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807]
[ 0.444267] pci 0000:00:1f.2: reg 0x1c: [io 0xe900-0xe903]
[ 0.444273] pci 0000:00:1f.2: reg 0x20: [io 0xea00-0xea1f]
[ 0.444279] pci 0000:00:1f.2: reg 0x24: [mem 0xf9306000-0xf93067ff]
[ 0.444313] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.444424] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.444438] pci 0000:00:1f.3: reg 0x10: [mem 0xf9307000-0xf93070ff 64bit]
[ 0.444454] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.444609] pci 0000:01:00.0: [10de:1402] type 00 class 0x030000
[ 0.444620] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
[ 0.444630] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.444639] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.444645] pci 0000:01:00.0: reg 0x24: [io 0xa000-0xa07f]
[ 0.444651] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.444729] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.444773] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[ 0.444784] pci 0000:01:00.1: reg 0x10: [mem 0xf6000000-0xf6003fff]
[ 0.444901] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.444903] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.444905] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff]
[ 0.444908] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.444967] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.444995] pci 0000:02:00.0: reg 0x10: [mem 0xf9100000-0xf9101fff 64bit]
[ 0.445143] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.445193] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:1c.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.445244] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[ 0.475867] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.475872] pci 0000:00:1c.0: bridge window [mem 0xf9100000-0xf91fffff]
[ 0.475985] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
[ 0.476058] pci 0000:03:00.0: reg 0x24: [mem 0xf9000000-0xf9001fff]
[ 0.476125] pci 0000:03:00.0: PME# supported from D3hot
[ 0.476232] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.476253] pci 0000:03:00.1: reg 0x10: [io 0xb000-0xb007]
[ 0.476265] pci 0000:03:00.1: reg 0x14: [io 0xb100-0xb103]
[ 0.476277] pci 0000:03:00.1: reg 0x18: [io 0xb200-0xb207]
[ 0.476288] pci 0000:03:00.1: reg 0x1c: [io 0xb300-0xb303]
[ 0.476300] pci 0000:03:00.1: reg 0x20: [io 0xb400-0xb40f]
[ 0.476438] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.476448] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.476451] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.476453] pci 0000:00:1c.4: bridge window [mem 0xf9000000-0xf90fffff]
[ 0.476514] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.476535] pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.476562] pci 0000:04:00.0: reg 0x18: [mem 0xf8000000-0xf8000fff 64bit]
[ 0.476593] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.476602] pci 0000:04:00.0: enabling Extended Tags
[ 0.476695] pci 0000:04:00.0: supports D1 D2
[ 0.476696] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.476788] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.476797] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.476800] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.476803] pci 0000:00:1c.5: bridge window [mem 0xf7000000-0xf8ffffff]
[ 0.476819] pci_bus 0000:05: extended config space not accessible
[ 0.476846] pci 0000:05:00.0: [10ec:8139] type 00 class 0x020000
[ 0.476860] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.476868] pci 0000:05:00.0: reg 0x14: [mem 0xf9205000-0xf92050ff]
[ 0.476928] pci 0000:05:00.0: supports D1 D2
[ 0.476929] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.476980] pci 0000:05:06.0: [104c:8024] type 00 class 0x0c0010
[ 0.476994] pci 0000:05:06.0: reg 0x10: [mem 0xf9204000-0xf92047ff]
[ 0.477002] pci 0000:05:06.0: reg 0x14: [mem 0xf9200000-0xf9203fff]
[ 0.477063] pci 0000:05:06.0: supports D1 D2
[ 0.477065] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.477126] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.477129] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.477132] pci 0000:00:1e.0: bridge window [mem 0xf9200000-0xf92fffff]
[ 0.477136] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.477137] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.477139] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.477140] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.477142] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode)
[ 0.477955] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.478045] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.478134] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[ 0.478224] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.478313] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.478402] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.478491] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.478581] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.478744] iommu: Default domain type: Translated
[ 0.485872] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.485872] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.485872] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.485872] vgaarb: loaded
[ 0.486067] SCSI subsystem initialized
[ 0.486072] libata version 3.00 loaded.
[ 0.486072] ACPI: bus type USB registered
[ 0.486072] usbcore: registered new interface driver usbfs
[ 0.486072] usbcore: registered new interface driver hub
[ 0.486072] usbcore: registered new device driver usb
[ 0.486072] pps_core: LinuxPPS API ver. 1 registered
[ 0.486072] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.486072] PTP clock support registered
[ 0.486072] EDAC MC: Ver: 3.0.0
[ 0.486094] NetLabel: Initializing
[ 0.486094] NetLabel: domain hash size = 128
[ 0.486094] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.486094] NetLabel: unlabeled traffic allowed by default
[ 0.486094] PCI: Using ACPI for IRQ routing
[ 0.487161] PCI: pci_cache_line_size set to 64 bytes
[ 0.487224] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.487226] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[ 0.487231] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.487231] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.487231] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.487231] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.488885] clocksource: Switched to clocksource tsc-early
[ 0.502063] VFS: Disk quotas dquot_6.6.0
[ 0.502083] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.502178] pnp: PnP ACPI init
[ 0.502441] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.502443] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.502444] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.502446] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.502447] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.502455] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.502546] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.502728] pnp 00:02: [dma 2]
[ 0.502758] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.503034] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.503449] pnp 00:04: [dma 3]
[ 0.503488] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.503608] system 00:05: [io 0x0400-0x04bf] could not be reserved
[ 0.503613] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.503889] system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.503894] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.504179] system 00:07: [mem 0x000d7000-0x000d7fff] has been reserved
[ 0.504181] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.504183] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.504185] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.504186] system 00:07: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.504188] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.504190] system 00:07: [mem 0x00100000-0xcfedffff] could not be reserved
[ 0.504192] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.504193] system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.504195] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.504196] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.504198] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.504199] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.504201] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
[ 0.504206] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.504212] pnp: PnP ACPI: found 8 devices
[ 0.510282] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.510346] NET: Registered protocol family 2
[ 0.510627] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.510761] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.511068] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.511193] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.511314] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.511374] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.511421] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.511479] NET: Registered protocol family 1
[ 0.511484] NET: Registered protocol family 44
[ 0.511493] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.511496] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.511498] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.511501] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.511515] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9400000-0xf95fffff 64bit pref]
[ 0.511518] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf9600000-0xf97fffff 64bit pref]
[ 0.511522] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf9800000-0xf99fffff 64bit pref]
[ 0.511524] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.511528] pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf507ffff pref]
[ 0.511530] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.511533] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.511535] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff]
[ 0.511537] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.511540] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.511542] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.511546] pci 0000:00:1c.0: bridge window [mem 0xf9100000-0xf91fffff]
[ 0.511548] pci 0000:00:1c.0: bridge window [mem 0xf9400000-0xf95fffff 64bit pref]
[ 0.511553] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.511555] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.511558] pci 0000:00:1c.4: bridge window [mem 0xf9000000-0xf90fffff]
[ 0.511561] pci 0000:00:1c.4: bridge window [mem 0xf9600000-0xf97fffff 64bit pref]
[ 0.511565] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7000000-0xf700ffff pref]
[ 0.511567] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.511569] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.511572] pci 0000:00:1c.5: bridge window [mem 0xf7000000-0xf8ffffff]
[ 0.511575] pci 0000:00:1c.5: bridge window [mem 0xf9800000-0xf99fffff 64bit pref]
[ 0.511580] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.511582] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.511585] pci 0000:00:1e.0: bridge window [mem 0xf9200000-0xf92fffff]
[ 0.511591] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.511592] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.511594] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.511595] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.511597] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window]
[ 0.511598] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.511599] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf6ffffff]
[ 0.511601] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.511602] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.511604] pci_bus 0000:02: resource 1 [mem 0xf9100000-0xf91fffff]
[ 0.511605] pci_bus 0000:02: resource 2 [mem 0xf9400000-0xf95fffff 64bit pref]
[ 0.511607] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.511608] pci_bus 0000:03: resource 1 [mem 0xf9000000-0xf90fffff]
[ 0.511609] pci_bus 0000:03: resource 2 [mem 0xf9600000-0xf97fffff 64bit pref]
[ 0.511611] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.511612] pci_bus 0000:04: resource 1 [mem 0xf7000000-0xf8ffffff]
[ 0.511613] pci_bus 0000:04: resource 2 [mem 0xf9800000-0xf99fffff 64bit pref]
[ 0.511615] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.511616] pci_bus 0000:05: resource 1 [mem 0xf9200000-0xf92fffff]
[ 0.511617] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.511619] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.511620] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.511621] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.511623] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff window]
[ 0.512835] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.512866] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.513049] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.513053] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.513063] PCI: CLS 32 bytes, default 64
[ 0.513112] Trying to unpack rootfs image as initramfs...
[ 0.610405] Freeing initrd memory: 16272K
[ 0.610462] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.610465] software IO TLB: mapped [mem 0x00000000cbee0000-0x00000000cfee0000] (64MB)
[ 0.611240] check: Scanning for low memory corruption every 60 seconds
[ 0.611610] Initialise system trusted keyrings
[ 0.611623] Key type blacklist registered
[ 0.611726] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.613226] zbud: loaded
[ 0.623397] Key type asymmetric registered
[ 0.623400] Asymmetric key parser 'x509' registered
[ 0.623408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.623481] io scheduler mq-deadline registered
[ 0.623483] io scheduler kyber registered
[ 0.623507] io scheduler bfq registered
[ 0.623639] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.624302] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.624333] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.624334] vesafb: scrolling: redraw
[ 0.624336] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.624350] vesafb: framebuffer at 0xe1000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
[ 0.624389] fbcon: Deferring console take-over
[ 0.624390] fb0: VESA VGA frame buffer device
[ 0.624404] intel_idle: MWAIT substates: 0x20
[ 0.624413] intel_idle: ACPI _CST not found or not usable
[ 0.624518] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.624545] ACPI: Power Button [PWRB]
[ 0.624590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.624628] ACPI: Power Button [PWRF]
[ 0.625172] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.625300] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.627248] Non-volatile memory driver v1.3
[ 0.627249] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.627250] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.627856] ahci 0000:00:1f.2: version 3.0
[ 0.627992] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.628021] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.628023] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.778335] scsi host0: ahci
[ 0.778527] scsi host1: ahci
[ 0.778693] scsi host2: ahci
[ 0.778856] scsi host3: ahci
[ 0.779028] scsi host4: ahci
[ 0.779194] scsi host5: ahci
[ 0.779246] ata1: SATA max UDMA/133 abar m2048@0xf9306000 port 0xf9306100 irq 28
[ 0.779248] ata2: SATA max UDMA/133 abar m2048@0xf9306000 port 0xf9306180 irq 28
[ 0.779249] ata3: SATA max UDMA/133 abar m2048@0xf9306000 port 0xf9306200 irq 28
[ 0.779251] ata4: SATA max UDMA/133 abar m2048@0xf9306000 port 0xf9306280 irq 28
[ 0.779253] ata5: SATA max UDMA/133 abar m2048@0xf9306000 port 0xf9306300 irq 28
[ 0.779254] ata6: SATA max UDMA/133 abar m2048@0xf9306000 port 0xf9306380 irq 28
[ 0.797825] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.797828] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.798191] scsi host6: ahci
[ 0.798375] scsi host7: ahci
[ 0.798422] ata7: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 16
[ 0.798425] ata8: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 16
[ 0.798457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.798466] ehci-pci: EHCI PCI platform driver
[ 0.798571] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.798577] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.802498] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.802508] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9305000
[ 0.837803] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.837875] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 0.837877] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.837879] usb usb1: Product: EHCI Host Controller
[ 0.837881] usb usb1: Manufacturer: Linux 5.10.22-2-lts ehci_hcd
[ 0.837883] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.838014] hub 1-0:1.0: USB hub found
[ 0.838022] hub 1-0:1.0: 6 ports detected
[ 0.838270] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.838274] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.842171] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.842180] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9304000
[ 0.877805] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.877867] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 0.877870] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.877872] usb usb2: Product: EHCI Host Controller
[ 0.877874] usb usb2: Manufacturer: Linux 5.10.22-2-lts ehci_hcd
[ 0.877875] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.877977] hub 2-0:1.0: USB hub found
[ 0.877985] hub 2-0:1.0: 6 ports detected
[ 0.878149] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.878153] ohci-pci: OHCI PCI platform driver
[ 0.878163] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.878247] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.878252] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.878257] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.878273] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 0.878332] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 0.878334] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.878335] usb usb3: Product: UHCI Host Controller
[ 0.878336] usb usb3: Manufacturer: Linux 5.10.22-2-lts uhci_hcd
[ 0.878338] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.878418] hub 3-0:1.0: USB hub found
[ 0.878427] hub 3-0:1.0: 2 ports detected
[ 0.878599] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.878604] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.878618] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.878642] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 0.878695] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 0.878697] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.878698] usb usb4: Product: UHCI Host Controller
[ 0.878700] usb usb4: Manufacturer: Linux 5.10.22-2-lts uhci_hcd
[ 0.878701] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.878782] hub 4-0:1.0: USB hub found
[ 0.878790] hub 4-0:1.0: 2 ports detected
[ 0.878957] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.878962] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.878967] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.878983] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
[ 0.879037] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 0.879039] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879040] usb usb5: Product: UHCI Host Controller
[ 0.879042] usb usb5: Manufacturer: Linux 5.10.22-2-lts uhci_hcd
[ 0.879043] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.879122] hub 5-0:1.0: USB hub found
[ 0.879130] hub 5-0:1.0: 2 ports detected
[ 0.879293] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.879298] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.879303] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.879318] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
[ 0.879369] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 0.879371] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879372] usb usb6: Product: UHCI Host Controller
[ 0.879373] usb usb6: Manufacturer: Linux 5.10.22-2-lts uhci_hcd
[ 0.879374] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.879454] hub 6-0:1.0: USB hub found
[ 0.879462] hub 6-0:1.0: 2 ports detected
[ 0.879650] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.879655] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.879660] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.879681] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
[ 0.879747] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 0.879749] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879750] usb usb7: Product: UHCI Host Controller
[ 0.879752] usb usb7: Manufacturer: Linux 5.10.22-2-lts uhci_hcd
[ 0.879753] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.879833] hub 7-0:1.0: USB hub found
[ 0.879841] hub 7-0:1.0: 2 ports detected
[ 0.880003] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.880008] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.880013] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.880028] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 0.880079] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 0.880080] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880082] usb usb8: Product: UHCI Host Controller
[ 0.880083] usb usb8: Manufacturer: Linux 5.10.22-2-lts uhci_hcd
[ 0.880084] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.880165] hub 8-0:1.0: USB hub found
[ 0.880173] hub 8-0:1.0: 2 ports detected
[ 0.880303] usbcore: registered new interface driver usbserial_generic
[ 0.880308] usbserial: USB Serial support registered for generic
[ 0.880331] i8042: PNP: No PS/2 controller found.
[ 0.880332] i8042: Probing ports directly.
[ 0.880705] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.880709] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.880842] rtc_cmos 00:01: RTC can wake from S4
[ 0.881008] rtc_cmos 00:01: registered as rtc0
[ 0.881037] rtc_cmos 00:01: setting system clock to 2021-03-12T06:18:44 UTC (1615529924)
[ 0.881060] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.881093] intel_pstate: CPU model not supported
[ 0.881175] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.881322] hid: raw HID events driver (C) Jiri Kosina
[ 0.881397] drop_monitor: Initializing network drop monitor service
[ 0.881464] Initializing XFRM netlink socket
[ 0.881581] NET: Registered protocol family 10
[ 0.887406] Segment Routing with IPv6
[ 0.887407] RPL Segment Routing with IPv6
[ 0.887431] NET: Registered protocol family 17
[ 0.887744] microcode: sig=0x10677, pf=0x10, revision=0x70a
[ 0.887769] microcode: Microcode Update Driver: v2.2.
[ 0.887779] IPI shorthand broadcast: enabled
[ 0.887789] sched_clock: Marking stable (896818122, -9145321)->(898884106, -11211305)
[ 0.887925] registered taskstats version 1
[ 0.887945] Loading compiled-in X.509 certificates
[ 0.891411] Loaded X.509 cert 'Build time autogenerated kernel key: a57be8a38e39487ee87408c6c0d03e72ad4e10e2'
[ 0.891580] zswap: loaded using pool lz4/z3fold
[ 0.891783] Key type ._fscrypt registered
[ 0.891784] Key type .fscrypt registered
[ 0.891785] Key type fscrypt-provisioning registered
[ 0.892215] PM: Magic number: 13:786:316
[ 0.892263] tty tty41: hash matches
[ 0.892421] RAS: Correctable Errors collector initialized.
[ 1.136124] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.139534] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.199512] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.305858] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.307217] ata1.00: ATA-9: SanDisk SD8SBAT256G1122, Z2201000, max UDMA/133
[ 1.307220] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.314721] ata1.00: configured for UDMA/133
[ 1.314864] scsi 0:0:0:0: Direct-Access ATA SanDisk SD8SBAT2 1000 PQ: 0 ANSI: 5
[ 1.315081] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.315093] sd 0:0:0:0: [sda] Write Protect is off
[ 1.315095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.315113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.315570] sda: sda1 sda2
[ 1.315935] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.397043] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01
[ 1.397046] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.397048] usb 1-1: Product: USB2.0 Hub
[ 1.397455] hub 1-1:1.0: USB hub found
[ 1.397792] hub 1-1:1.0: 4 ports detected
[ 1.475852] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 1.635853] usb 8-1: device descriptor read/64, error -71
[ 1.645853] tsc: Refined TSC clocksource calibration: 2833.332 MHz
[ 1.645859] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28d740293ac, max_idle_ns: 440795206647 ns
[ 1.645883] clocksource: Switched to clocksource tsc
[ 1.815859] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.816644] ata2.00: supports DRM functions and may not be fully accessible
[ 1.817451] ata2.00: ATA-11: SanDisk SD9TB8W256G1001, X6107101, max UDMA/133
[ 1.817453] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.820585] ata2.00: supports DRM functions and may not be fully accessible
[ 1.823682] ata2.00: configured for UDMA/133
[ 1.823773] scsi 1:0:0:0: Direct-Access ATA SanDisk SD9TB8W2 7101 PQ: 0 ANSI: 5
[ 1.823976] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.823987] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.823989] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.824007] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.824294] sdb: sdb1
[ 1.925854] usb 8-1: device descriptor read/64, error -71
[ 1.939867] sd 1:0:0:0: [sdb] supports TCG Opal
[ 1.939870] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.195853] usb 8-1: new full-speed USB device number 3 using uhci_hcd
[ 2.315863] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.319813] ata3.00: HPA detected: current 781420655, native 781422768
[ 2.319866] ata3.00: ATA-8: SAMSUNG HD403LJ, CT100-10, max UDMA7
[ 2.319868] ata3.00: 781420655 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.321840] ata3.00: configured for UDMA/133
[ 2.321923] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD403LJ 0-10 PQ: 0 ANSI: 5
[ 2.322091] sd 2:0:0:0: [sdc] 781420655 512-byte logical blocks: (400 GB/373 GiB)
[ 2.322102] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.322104] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.322121] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.355851] usb 8-1: device descriptor read/64, error -71
[ 2.358686] sdc: sdc1 sdc2
[ 2.359036] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.635852] usb 8-1: device descriptor read/64, error -71
[ 2.755871] usb usb8-port1: attempt power cycle
[ 2.815859] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.818568] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
[ 2.822432] ata4.00: configured for UDMA/100
[ 2.931973] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
[ 3.245853] usb 8-1: new full-speed USB device number 4 using uhci_hcd
[ 3.337048] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.667043] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.668885] Freeing unused decrypted memory: 2036K
[ 3.669366] Freeing unused kernel image (initmem) memory: 1772K
[ 3.669399] Write protecting the kernel read-only data: 26624k
[ 3.670143] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 3.670650] Freeing unused kernel image (rodata/data gap) memory: 1420K
[ 3.716211] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.716216] rodata_test: all tests were successful
[ 3.716233] x86/mm: Checking user space page tables
[ 3.759695] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.759705] Run /init as init process
[ 3.759706] with arguments:
[ 3.759708] /init
[ 3.759709] with environment:
[ 3.759710] HOME=/
[ 3.759711] TERM=linux
[ 3.759712] BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
[ 3.759751] usb 8-1: device not accepting address 4, error -71
[ 3.774552] systemd[1]: systemd 247.3-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.795986] systemd[1]: Detected architecture x86-64.
[ 3.795989] systemd[1]: Running in initial RAM disk.
[ 3.876087] fbcon: Taking over console
[ 3.876159] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.876166] systemd[1]: Initializing machine ID from random generator.
[ 3.892288] Console: switching to colour frame buffer device 80x30
[ 3.915869] usb 8-1: new full-speed USB device number 5 using uhci_hcd
[ 3.916971] systemd[1]: Queued start job for default target Initrd Default Target.
[ 3.917074] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.917087] systemd[1]: Reached target Local File Systems.
[ 3.917334] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.917342] systemd[1]: Reached target Paths.
[ 3.917505] systemd[1]: Reached target Slices.
[ 3.917668] systemd[1]: Reached target Swap.
[ 3.917825] systemd[1]: Reached target Timers.
[ 3.918124] systemd[1]: Listening on Journal Audit Socket.
[ 3.918421] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.918741] systemd[1]: Listening on Journal Socket.
[ 3.919006] systemd[1]: Listening on udev Control Socket.
[ 3.919257] systemd[1]: Listening on udev Kernel Socket.
[ 3.919452] systemd[1]: Reached target Sockets.
[ 3.931353] systemd[1]: Starting Archlogo...
[ 3.932506] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.934419] systemd[1]: Starting Journal Service...
[ 3.935630] systemd[1]: Starting Load Kernel Modules...
[ 3.936724] systemd[1]: Starting Coldplug All udev Devices...
[ 3.938033] systemd[1]: Finished Archlogo.
[ 3.942170] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.945949] systemd[1]: Finished Load Kernel Modules.
[ 3.950120] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.955321] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.960757] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 3.997011] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 4.012009] audit: type=1130 audit(1615529927.614:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 4.041689] systemd[1]: Finished Coldplug All udev Devices.
[ 4.045584] audit: type=1130 audit(1615529927.644:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 4.049109] Floppy drive(s): fd0 is 1.44M
[ 4.050775] systemd[1]: Started Journal Service.
[ 4.050929] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 4.050937] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 4.051056] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 4.051341] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 4.051342] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.051344] usb usb9: Product: xHCI Host Controller
[ 4.051345] usb usb9: Manufacturer: Linux 5.10.22-2-lts xhci-hcd
[ 4.051346] usb usb9: SerialNumber: 0000:02:00.0
[ 4.052181] hub 9-0:1.0: USB hub found
[ 4.052195] hub 9-0:1.0: 2 ports detected
[ 4.052523] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 4.052526] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
[ 4.052529] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 4.054435] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.054467] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 4.054469] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.054470] usb usb10: Product: xHCI Host Controller
[ 4.054471] usb usb10: Manufacturer: Linux 5.10.22-2-lts xhci-hcd
[ 4.054472] usb usb10: SerialNumber: 0000:02:00.0
[ 4.054617] hub 10-0:1.0: USB hub found
[ 4.054633] hub 10-0:1.0: 2 ports detected
[ 4.056982] audit: type=1130 audit(1615529927.664:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 4.068317] scsi host8: pata_jmicron
[ 4.080228] FDC 0 is a post-1991 82077
[ 4.086492] scsi host9: pata_jmicron
[ 4.086556] ata9: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 17
[ 4.086558] ata10: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 17
[ 4.135815] raid6: skip pq benchmark and using algorithm sse2x4
[ 4.135818] raid6: using ssse3x2 recovery algorithm
[ 4.135906] firewire_ohci 0000:05:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 4.137476] xor: measuring software checksum speed
[ 4.138175] prefetch64-sse : 14133 MB/sec
[ 4.138996] generic_sse : 12236 MB/sec
[ 4.138997] xor: using function: prefetch64-sse (14133 MB/sec)
[ 4.180202] random: fast init done
[ 4.258761] ata9.00: ATA-7: SAMSUNG SP2514N, VF100-41, max UDMA/100
[ 4.258765] ata9.00: 488397168 sectors, multi 0: LBA48
[ 4.279642] Btrfs loaded, crc32c=crc32c-generic
[ 4.280367] BTRFS: device label archlinux devid 1 transid 137439 /dev/sda1 scanned by systemd-udevd (165)
[ 4.290977] scsi 8:0:0:0: Direct-Access ATA SAMSUNG SP2514N 0-41 PQ: 0 ANSI: 5
[ 4.291218] sd 8:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 4.291233] sd 8:0:0:0: [sdd] Write Protect is off
[ 4.291236] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.291254] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.299096] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.299101] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.338829] sd 8:0:0:0: [sdd] Attached SCSI disk
[ 4.365859] usb 8-1: device not accepting address 5, error -71
[ 4.365920] usb usb8-port1: unable to enumerate USB device
[ 4.366419] BTRFS: device label archlinux devid 2 transid 137439 /dev/sdb1 scanned by systemd-udevd (169)
[ 4.413446] audit: type=1130 audit(1615529928.014:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck-root comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 4.426299] BTRFS info (device sda1): using free space tree
[ 4.426303] BTRFS info (device sda1): has skinny extents
[ 4.433539] BTRFS info (device sda1): bdev /dev/sdb1 errs: wr 2701995, rd 2718862, flush 0, corrupt 6, gen 0
[ 4.532225] BTRFS info (device sda1): enabling ssd optimizations
[ 4.536191] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.553394] audit: type=1334 audit(1615529928.154:6): prog-id=6 op=UNLOAD
[ 4.553401] audit: type=1334 audit(1615529928.154:7): prog-id=5 op=UNLOAD
[ 4.554893] audit: type=1334 audit(1615529928.154:8): prog-id=4 op=UNLOAD
[ 4.555040] audit: type=1334 audit(1615529928.154:9): prog-id=3 op=UNLOAD
[ 4.633068] BTRFS: device label backup devid 1 transid 1335 /dev/sdd scanned by systemd-udevd (169)
[ 4.645957] firewire_core 0000:05:06.0: created device fw0: GUID 00c43cc000001a4d, S400
[ 4.658633] audit: type=1334 audit(1615529928.264:10): prog-id=7 op=LOAD
[ 4.755888] usb 8-2: new full-speed USB device number 6 using uhci_hcd
[ 4.973534] usb 8-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.00
[ 4.973538] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.973540] usb 8-2: Product: USB Receiver
[ 4.973542] usb 8-2: Manufacturer: Logitech
[ 5.246311] usb 10-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 5.282289] usb 10-1: New USB device found, idVendor=8564, idProduct=4000, bcdDevice= 0.3a
[ 5.282291] usb 10-1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 5.282292] usb 10-1: Product: Transcend
[ 5.282293] usb 10-1: Manufacturer: TS-RDF5
[ 5.282295] usb 10-1: SerialNumber: 000000000037
[ 6.245983] usb 10-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 6.282444] usb 10-2: New USB device found, idVendor=1058, idProduct=107c, bcdDevice=10.65
[ 6.282446] usb 10-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 6.282448] usb 10-2: Product: Elements 107C
[ 6.282450] usb 10-2: Manufacturer: Western Digital
[ 6.282452] usb 10-2: SerialNumber: 575834314432353954414350
[ 16.914959] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 16.914963] floppy: error 10 while reading block 0
[ 16.918529] kauditd_printk_skb: 10 callbacks suppressed
[ 16.918530] audit: type=1131 audit(1615529940.524:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 16.935778] audit: type=1131 audit(1615529940.534:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 16.939825] audit: type=1131 audit(1615529940.544:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 16.943963] audit: type=1130 audit(1615529940.544:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-udevadm-cleanup-db comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 16.943967] audit: type=1131 audit(1615529940.544:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-udevadm-cleanup-db comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[ 16.960033] audit: type=1334 audit(1615529940.564:26): prog-id=10 op=UNLOAD
[ 16.960039] audit: type=1334 audit(1615529940.564:27): prog-id=9 op=UNLOAD
[ 16.986345] audit: type=1334 audit(1615529940.594:28): prog-id=8 op=UNLOAD
[ 16.986350] audit: type=1334 audit(1615529940.594:29): prog-id=7 op=UNLOAD
[ 17.059210] systemd-journald[140]: Received SIGTERM from PID 1 (systemd).
[ 17.227596] systemd[1]: systemd 247.3-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 17.265955] systemd[1]: Detected architecture x86-64.
[ 17.276240] systemd[1]: Set hostname to <pc1-desktop>.
[ 17.279845] audit: type=1334 audit(1615529940.884:30): prog-id=11 op=LOAD
[ 17.788185] systemd[1]: initrd-switch-root.service: Succeeded.
[ 17.788686] systemd[1]: Stopped Switch Root.
[ 17.792017] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 17.792376] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 17.795882] systemd[1]: Created slice system-getty.slice.
[ 17.799234] systemd[1]: Created slice system-modprobe.slice.
[ 17.802559] systemd[1]: Created slice User and Session Slice.
[ 17.805626] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 17.808876] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 17.812278] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 17.815655] systemd[1]: Reached target Local Encrypted Volumes.
[ 17.819225] systemd[1]: Stopped target Switch Root.
[ 17.822626] systemd[1]: Stopped target Initrd File Systems.
[ 17.826052] systemd[1]: Stopped target Initrd Root File System.
[ 17.829525] systemd[1]: Reached target Paths.
[ 17.832979] systemd[1]: Reached target Remote File Systems.
[ 17.836772] systemd[1]: Reached target Slices.
[ 17.840295] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 17.844319] systemd[1]: Listening on LVM2 poll daemon socket.
[ 17.849000] systemd[1]: Listening on Process Core Dump Socket.
[ 17.853525] systemd[1]: Listening on udev Control Socket.
[ 17.856826] systemd[1]: Listening on udev Kernel Socket.
[ 17.860924] systemd[1]: Activating swap /dev/disk/by-uuid/f500539a-35cd-46b6-88be-3f027c45a6c6...
[ 17.865628] systemd[1]: Mounting /dev/hugepages...
[ 17.870282] systemd[1]: Mounting POSIX Message Queue File System...
[ 17.875145] systemd[1]: Mounting Kernel Debug File System...
[ 17.879550] systemd[1]: Mounting Kernel Trace File System...
[ 17.884050] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 17.888702] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 17.893454] systemd[1]: Starting Load Kernel Module configfs...
[ 17.898233] systemd[1]: Starting Load Kernel Module drm...
[ 17.902709] systemd[1]: Starting Load Kernel Module fuse...
[ 17.905675] Linux agpgart interface v0.103
[ 17.908133] systemd[1]: Starting Set Up Additional Binary Formats...
[ 17.911839] systemd[1]: systemd-fsck-root.service: Succeeded.
[ 17.912402] systemd[1]: Stopped File System Check on Root Device.
[ 17.915990] systemd[1]: Stopped Journal Service.
[ 17.919245] fuse: init (API version 7.32)
[ 17.921488] systemd[1]: Starting Journal Service...
[ 17.926443] systemd[1]: Starting Load Kernel Modules...
[ 17.931144] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 17.934985] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 17.935883] Adding 2011476k swap on /dev/sda2. Priority:-2 extents:1 across:2011476k SSFS
[ 17.936306] systemd[1]: Starting Coldplug All udev Devices...
[ 17.938183] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.938223] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 17.938259] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 17.938296] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 17.938332] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 17.942246] systemd[1]: sysroot.mount: Succeeded.
[ 17.944784] systemd[1]: Activated swap /dev/disk/by-uuid/f500539a-35cd-46b6-88be-3f027c45a6c6.
[ 17.959341] systemd[1]: Mounted /dev/hugepages.
[ 17.966146] systemd[1]: Mounted POSIX Message Queue File System.
[ 17.969835] systemd[1]: Started Journal Service.
[ 18.114945] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 18.118678] Bridge firewalling registered
[ 18.795140] BTRFS info (device sda1): use zstd compression, level 3
[ 18.795144] BTRFS info (device sda1): using free space tree
[ 19.085379] IT8718 SuperIO detected
[ 19.085535] parport_pc 00:04: reported by Plug and Play ACPI
[ 19.085598] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 19.240778] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20200925/utaddress-204)
[ 19.240786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.240819] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 19.243095] usb-storage 10-1:1.0: USB Mass Storage device detected
[ 19.246435] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 19.246439] 8139cp 0000:05:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 19.247241] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:046D:C52B.0001/input/input4
[ 19.248737] scsi host10: usb-storage 10-1:1.0
[ 19.248822] usb-storage 10-2:1.0: USB Mass Storage device detected
[ 19.265260] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 19.268461] eeprom 0-0050: eeprom driver is deprecated, please use at24 instead
[ 19.274855] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 19.275639] scsi host11: usb-storage 10-2:1.0
[ 19.275766] usbcore: registered new interface driver usb-storage
[ 19.279106] usbcore: registered new interface driver uas
[ 19.279232] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 19.279846] 8139too 0000:05:00.0 eth0: RealTek RTL8139 at 0x(____ptrval____), 00:40:95:30:3f:96, IRQ 20
[ 19.280371] eeprom 0-0051: eeprom driver is deprecated, please use at24 instead
[ 19.284153] eeprom 0-0052: eeprom driver is deprecated, please use at24 instead
[ 19.284918] eeprom 0-0053: eeprom driver is deprecated, please use at24 instead
[ 19.316080] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[ 19.321424] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C52B.0002/input/input5
[ 19.321515] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C52B.0002/input/input6
[ 19.322245] libphy: r8169: probed
[ 19.322889] r8169 0000:04:00.0 eth1: RTL8168b/8111b, 00:1a:4d:47:b3:48, XID 380, IRQ 17
[ 19.322892] r8169 0000:04:00.0 eth1: jumbo features [frames: 4074 bytes, tx checksumming: ko]
[ 19.386642] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 19.396340] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C52B.0002/input/input7
[ 19.396865] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[ 19.398039] device-mapper: uevent: version 1.0.3
[ 19.398105] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 19.407291] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input2
[ 19.407332] usbcore: registered new interface driver usbhid
[ 19.407334] usbhid: USB HID core driver
[ 19.420871] gpio_ich gpio_ich.2.auto: GPIO from 451 to 511
[ 19.441132] 8139too 0000:05:00.0 enp5s0: renamed from eth0
[ 19.470160] iTCO_vendor_support: vendor-support=0
[ 19.493787] ppdev: user-space parallel port driver
[ 19.517069] r8169 0000:04:00.0 enp4s0: renamed from eth1
[ 19.656228] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 19.656287] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 19.728478] intel_powerclamp: No package C-state available
[ 19.736607] snd_hda_intel 0000:00:1b.0: position_fix set to 1 for device 1458:a022
[ 19.736740] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 19.736748] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 19.765295] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 19.765300] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.765302] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 19.765304] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 19.765305] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 19.765306] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 19.765308] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 19.765310] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 19.765311] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 19.765313] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 19.765314] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
[ 19.780388] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 19.796261] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 19.801450] random: crng init done
[ 19.801455] random: 7 urandom warning(s) missed due to ratelimiting
[ 19.846753] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 19.847073] intel_powerclamp: No package C-state available
[ 19.886064] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 19.886149] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 19.886226] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 19.886296] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 19.886353] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 19.886411] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 19.886469] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 19.886524] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 19.886581] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 19.886754] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 19.886811] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 19.887078] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input2
[ 19.946568] intel_powerclamp: No package C-state available
[ 20.030084] input: Logitech Wireless Device PID:101b Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input25
[ 20.030167] hid-generic 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:101b] on usb-0000:00:1d.2-2/input2:1
[ 20.032279] input: Logitech Wireless Device PID:2008 Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:046D:C52B.0003/0003:046D:2008.0005/input/input29
[ 20.032446] input: Logitech Wireless Device PID:2008 Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:046D:C52B.0003/0003:046D:2008.0005/input/input30
[ 20.032499] input: Logitech Wireless Device PID:2008 System Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:046D:C52B.0003/0003:046D:2008.0005/input/input31
[ 20.032561] hid-generic 0003:046D:2008.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:2008] on usb-0000:00:1d.2-2/input2:2
[ 20.079108] intel_powerclamp: No package C-state available
[ 20.092745] mousedev: PS/2 mouse device common for all mice
[ 20.286734] scsi 11:0:0:0: Direct-Access WD Elements 107C 1065 PQ: 0 ANSI: 6
[ 20.287351] scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS3A PQ: 0 ANSI: 6
[ 20.287579] sd 10:0:0:0: Attached scsi generic sg5 type 0
[ 20.287786] sd 11:0:0:0: Attached scsi generic sg6 type 0
[ 20.288421] sd 11:0:0:0: [sdf] 1220934400 4096-byte logical blocks: (5.00 TB/4.55 TiB)
[ 20.288961] sd 11:0:0:0: [sdf] Write Protect is off
[ 20.288963] sd 11:0:0:0: [sdf] Mode Sense: 53 00 10 08
[ 20.289460] sd 11:0:0:0: [sdf] No Caching mode page found
[ 20.289462] sd 11:0:0:0: [sdf] Assuming drive cache: write through
[ 20.327603] input: Logitech M705 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input36
[ 20.327715] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:1d.2-2/input2:1
[ 20.337597] sd 10:0:0:0: [sde] Attached SCSI removable disk
[ 20.338099] BTRFS info (device sdd): use zstd compression, level 3
[ 20.338102] BTRFS info (device sdd): using free space tree
[ 20.338103] BTRFS info (device sdd): has skinny extents
[ 20.443805] systemd-journald[250]: Received client request to flush runtime journal.
[ 20.541382] nvidia: loading out-of-tree module taints kernel.
[ 20.541396] nvidia: module license 'NVIDIA' taints kernel.
[ 20.541397] Disabling lock debugging due to kernel taint
[ 20.588830] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 20.622528] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 20.623618] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 20.685589] attempt to access beyond end of device
sdb1: rw=524288, want=496544128, limit=496091703
[ 20.685798] attempt to access beyond end of device
sdb1: rw=2049, want=496544128, limit=496091703
[ 20.685804] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718862, flush 0, corrupt 6, gen 0
[ 20.740413] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 460.56 Tue Feb 23 23:31:36 UTC 2021
[ 20.805936] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.56 Tue Feb 23 23:20:29 UTC 2021
[ 20.842957] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 20.842960] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 20.925760] input: Logitech MK700 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:046D:C52B.0003/0003:046D:2008.0005/input/input37
[ 20.926631] logitech-hidpp-device 0003:046D:2008.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech MK700] on usb-0000:00:1d.2-2/input2:2
[ 20.940265] sdf: sdf1
[ 20.941832] sd 11:0:0:0: [sdf] Attached SCSI disk
[ 21.334496] attempt to access beyond end of device
sdb1: rw=0, want=496474752, limit=496091703
[ 21.334501] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718863, flush 0, corrupt 6, gen 0
[ 21.334512] attempt to access beyond end of device
sdb1: rw=0, want=496474784, limit=496091703
[ 21.334514] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718864, flush 0, corrupt 6, gen 0
[ 21.334542] attempt to access beyond end of device
sdb1: rw=0, want=496474752, limit=496091703
[ 21.334545] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718865, flush 0, corrupt 6, gen 0
[ 21.334551] attempt to access beyond end of device
sdb1: rw=0, want=496474784, limit=496091703
[ 21.334553] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718866, flush 0, corrupt 6, gen 0
[ 21.334576] attempt to access beyond end of device
sdb1: rw=0, want=496474752, limit=496091703
[ 21.334578] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718867, flush 0, corrupt 6, gen 0
[ 21.334584] attempt to access beyond end of device
sdb1: rw=0, want=496474784, limit=496091703
[ 21.334586] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718868, flush 0, corrupt 6, gen 0
[ 21.334613] attempt to access beyond end of device
sdb1: rw=0, want=496474752, limit=496091703
[ 21.334615] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718869, flush 0, corrupt 6, gen 0
[ 21.334620] attempt to access beyond end of device
sdb1: rw=0, want=496474784, limit=496091703
[ 21.334622] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718870, flush 0, corrupt 6, gen 0
[ 21.334649] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2701996, rd 2718871, flush 0, corrupt 6, gen 0
[ 21.396485] it87: Found IT8718F chip at 0x290, revision 4
[ 21.396495] it87: VID is disabled (pins used for GPIO)
[ 21.396503] it87: Beeping is supported
[ 21.937285] RTL8211B Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[ 21.965191] kauditd_printk_skb: 71 callbacks suppressed
[ 21.965194] audit: type=1130 audit(1615529945.564:102): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.018251] r8169 0000:04:00.0 enp4s0: Link is Down
[ 22.030061] 8139too 0000:05:00.0 enp5s0: link down
[ 22.066610] audit: type=1130 audit(1615529945.674:103): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.071773] audit: type=1130 audit(1615529945.674:104): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.346657] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 22.347052] caller _nv000708rm+0x1af/0x200 [nvidia] mapping multiple BARs
[ 22.381462] audit: type=1130 audit(1615529945.984:105): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pcscd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.381746] audit: type=1130 audit(1615529946.984:106): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=smartd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.568140] audit: type=1103 audit(1615529947.174:107): pid=965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 23.601093] audit: type=1130 audit(1615529947.204:108): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.614122] audit: type=1101 audit(1615529947.214:109): pid=969 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.614127] audit: type=1103 audit(1615529947.214:110): pid=969 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 23.614130] audit: type=1006 audit(1615529947.214:111): pid=969 uid=0 old-auid=4294967295 auid=975 tty=(none) old-ses=4294967295 ses=1 res=1
[ 24.695631] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 24.695648] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 24.701401] br0: port 1(enp4s0) entered blocking state
[ 24.701406] br0: port 1(enp4s0) entered disabled state
[ 24.701500] device enp4s0 entered promiscuous mode
[ 24.701570] br0: port 1(enp4s0) entered blocking state
[ 24.701573] br0: port 1(enp4s0) entered forwarding state
[ 24.701603] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 28.407633] logitech-hidpp-device 0003:046D:2008.0005: HID++ 1.0 device connected.
[ 31.714307] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 31.714315] floppy: error 10 while reading block 0
[ 31.998968] kauditd_printk_skb: 11 callbacks suppressed
[ 31.998970] audit: type=1131 audit(1615529955.604:123): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 32.088582] audit: type=1100 audit(1615529955.694:124): pid=2135 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_unix,pam_permit,pam_gnome_keyring acct="thomas" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 32.088855] audit: type=1101 audit(1615529955.694:125): pid=2135 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 32.136243] audit: type=1106 audit(1615529955.744:126): pid=965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 32.136249] audit: type=1104 audit(1615529955.744:127): pid=965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 32.140420] audit: type=1103 audit(1615529955.744:128): pid=2135 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_unix,pam_permit,pam_gnome_keyring acct="thomas" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 32.140563] audit: type=1006 audit(1615529955.744:129): pid=2135 uid=0 old-auid=4294967295 auid=1001 tty=(none) old-ses=4294967295 ses=2 res=1
[ 32.169702] audit: type=1130 audit(1615529955.774:130): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1001 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 32.178083] audit: type=1101 audit(1615529955.784:131): pid=2157 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 32.179318] audit: type=1103 audit(1615529955.784:132): pid=2157 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="thomas" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 32.806026] handle_bad_sector: 213 callbacks suppressed
[ 32.806029] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806035] btrfs_dev_stat_print_on_error: 212 callbacks suppressed
[ 32.806039] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2718992, flush 0, corrupt 6, gen 0
[ 32.806133] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806142] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2718993, flush 0, corrupt 6, gen 0
[ 32.806170] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806172] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2718994, flush 0, corrupt 6, gen 0
[ 32.806226] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806229] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2718995, flush 0, corrupt 6, gen 0
[ 32.806281] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806283] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2718996, flush 0, corrupt 6, gen 0
[ 32.806334] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806336] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2718997, flush 0, corrupt 6, gen 0
[ 32.806379] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806382] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2718998, flush 0, corrupt 6, gen 0
[ 32.806435] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806437] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2718999, flush 0, corrupt 6, gen 0
[ 32.806479] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806481] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2719000, flush 0, corrupt 6, gen 0
[ 32.806524] attempt to access beyond end of device
sdb1: rw=0, want=496724096, limit=496091703
[ 32.806526] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702088, rd 2719001, flush 0, corrupt 6, gen 0
[ 41.305900] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 41.399528] kauditd_printk_skb: 9 callbacks suppressed
[ 41.399531] audit: type=1100 audit(1615529965.004:142): pid=3611 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_permit acct="locadmin" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 41.399537] audit: type=1101 audit(1615529965.004:143): pid=3611 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_unix acct="locadmin" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 41.399540] audit: type=1103 audit(1615529965.004:144): pid=3611 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="locadmin" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 41.399543] audit: type=1006 audit(1615529965.004:145): pid=3611 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[ 41.399546] audit: type=1105 audit(1615529965.004:146): pid=3611 uid=0 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_permit,pam_loginuid acct="locadmin" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 41.406113] audit: type=1100 audit(1615529965.014:147): pid=3615 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_permit acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 41.406238] audit: type=1101 audit(1615529965.014:148): pid=3615 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 41.406263] audit: type=1103 audit(1615529965.014:149): pid=3615 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 41.406329] audit: type=1006 audit(1615529965.014:150): pid=3615 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=5 res=1
[ 41.406349] audit: type=1105 audit(1615529965.014:151): pid=3615 uid=0 auid=0 ses=5 msg='op=PAM:session_open grantors=pam_permit,pam_loginuid acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 41.469440] usb 1-1.1: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 5.24
[ 41.469445] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 41.469447] usb 1-1.1: Product: YubiKey OTP+FIDO+CCID
[ 41.469449] usb 1-1.1: Manufacturer: Yubico
[ 41.471401] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/0003:1050:0407.0006/input/input38
[ 41.536862] hid-generic 0003:1050:0407.0006: input,hidraw3: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:1a.7-1.1/input0
[ 41.537938] hid-generic 0003:1050:0407.0007: hiddev97,hidraw4: USB HID v1.10 Device [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:1a.7-1.1/input1
[ 43.095611] logitech-hidpp-device 0003:046D:101B.0004: HID++ 1.0 device connected.
[ 45.507961] handle_bad_sector: 39 callbacks suppressed
[ 45.507965] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.507970] btrfs_dev_stat_print_on_error: 39 callbacks suppressed
[ 45.507974] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719017, flush 0, corrupt 6, gen 0
[ 45.508057] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508066] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719018, flush 0, corrupt 6, gen 0
[ 45.508086] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508088] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719019, flush 0, corrupt 6, gen 0
[ 45.508107] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508109] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719020, flush 0, corrupt 6, gen 0
[ 45.508130] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508132] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719021, flush 0, corrupt 6, gen 0
[ 45.508152] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508154] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719022, flush 0, corrupt 6, gen 0
[ 45.508173] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508175] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719023, flush 0, corrupt 6, gen 0
[ 45.508191] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508193] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719024, flush 0, corrupt 6, gen 0
[ 45.508209] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508211] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719025, flush 0, corrupt 6, gen 0
[ 45.508228] attempt to access beyond end of device
sdb1: rw=0, want=496476776, limit=496091703
[ 45.508230] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702112, rd 2719026, flush 0, corrupt 6, gen 0
[ 51.799101] kauditd_printk_skb: 12 callbacks suppressed
[ 51.799103] audit: type=1131 audit(1615529975.858:164): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 52.066076] audit: type=1334 audit(1615529976.128:165): prog-id=24 op=UNLOAD
[ 52.066083] audit: type=1334 audit(1615529976.128:166): prog-id=23 op=UNLOAD
[ 84.481203] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/0003:1050:0407.0008/input/input39
[ 84.546641] hid-generic 0003:1050:0407.0008: input,hidraw3: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:1a.7-1.1/input0
[ 84.548371] audit: type=1100 audit(1615530008.607:167): pid=12300 uid=1001 auid=1001 ses=2 msg='op=PAM:authentication grantors=pam_yubico acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 84.548376] audit: type=1101 audit(1615530008.607:168): pid=12300 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 84.564619] audit: type=1101 audit(1615530008.617:169): pid=12389 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 84.567497] audit: type=1110 audit(1615530008.627:170): pid=12389 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 84.568841] audit: type=1105 audit(1615530008.627:171): pid=12389 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 85.262271] audit: type=1106 audit(1615530009.317:172): pid=12389 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 85.262277] audit: type=1104 audit(1615530009.317:173): pid=12389 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 95.971032] audit: type=1131 audit(1615530020.024:174): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pcscd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 98.416603] audit: type=1130 audit(1615530022.464:175): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 98.416608] audit: type=1131 audit(1615530022.464:176): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 103.373572] audit: type=1131 audit(1615530027.423:177): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapperd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 113.837220] audit: type=1101 audit(1615530037.882:178): pid=14706 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 113.855459] audit: type=1101 audit(1615530037.902:179): pid=14707 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 113.856328] audit: type=1110 audit(1615530037.902:180): pid=14707 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 113.857395] audit: type=1105 audit(1615530037.902:181): pid=14707 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 113.860908] audit: type=1106 audit(1615530037.902:182): pid=14707 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 113.860959] audit: type=1104 audit(1615530037.902:183): pid=14707 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 132.793247] audit: type=1101 audit(1615530056.842:184): pid=14734 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 132.810380] audit: type=1101 audit(1615530056.852:185): pid=14735 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 132.810555] audit: type=1110 audit(1615530056.852:186): pid=14735 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 132.811262] audit: type=1105 audit(1615530056.852:187): pid=14735 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 133.549715] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
[ 133.553580] audit: type=1106 audit(1615530057.602:188): pid=14735 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 133.553584] audit: type=1104 audit(1615530057.602:189): pid=14735 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 142.050471] audit: type=1131 audit(1615530066.092:190): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=libvirtd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 168.042220] audit: type=1101 audit(1615530092.092:191): pid=14818 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 168.058823] audit: type=1101 audit(1615530092.102:192): pid=14819 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 168.059090] audit: type=1110 audit(1615530092.102:193): pid=14819 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 168.060059] audit: type=1105 audit(1615530092.102:194): pid=14819 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 175.877323] audit: type=1106 audit(1615530099.922:195): pid=14819 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 175.877330] audit: type=1104 audit(1615530099.922:196): pid=14819 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 180.927054] handle_bad_sector: 17 callbacks suppressed
[ 180.927057] attempt to access beyond end of device
sdb1: rw=524288, want=496239584, limit=496091703
[ 180.927283] attempt to access beyond end of device
sdb1: rw=2049, want=496239584, limit=496091703
[ 180.927290] btrfs_dev_stat_print_on_error: 17 callbacks suppressed
[ 180.927294] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702126, rd 2719030, flush 0, corrupt 6, gen 0
[ 180.948865] attempt to access beyond end of device
sdb1: rw=524288, want=496239720, limit=496091703
[ 180.957841] attempt to access beyond end of device
sdb1: rw=2049, want=496239720, limit=496091703
[ 180.957848] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702127, rd 2719030, flush 0, corrupt 6, gen 0
[ 180.980486] attempt to access beyond end of device
sdb1: rw=524288, want=497027224, limit=496091703
[ 180.980846] attempt to access beyond end of device
sdb1: rw=2049, want=497027224, limit=496091703
[ 180.980856] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702128, rd 2719030, flush 0, corrupt 6, gen 0
[ 180.989001] attempt to access beyond end of device
sdb1: rw=524288, want=497027160, limit=496091703
[ 180.989015] attempt to access beyond end of device
sdb1: rw=524288, want=497027096, limit=496091703
[ 180.989024] attempt to access beyond end of device
sdb1: rw=524288, want=497027152, limit=496091703
[ 180.989048] attempt to access beyond end of device
sdb1: rw=524288, want=497027280, limit=496091703
[ 180.992157] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702129, rd 2719030, flush 0, corrupt 6, gen 0
[ 180.992169] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702130, rd 2719030, flush 0, corrupt 6, gen 0
[ 180.992178] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702131, rd 2719030, flush 0, corrupt 6, gen 0
[ 180.992204] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702132, rd 2719030, flush 0, corrupt 6, gen 0
[ 180.995526] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702133, rd 2719030, flush 0, corrupt 6, gen 0
[ 181.007441] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702134, rd 2719030, flush 0, corrupt 6, gen 0
[ 181.007455] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702135, rd 2719030, flush 0, corrupt 6, gen 0
[ 189.746637] audit: type=1130 audit(1615530113.793:197): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pcscd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 214.905806] handle_bad_sector: 63 callbacks suppressed
[ 214.905809] attempt to access beyond end of device
sdb1: rw=2049, want=497027120, limit=496091703
[ 214.905812] btrfs_dev_stat_print_on_error: 28 callbacks suppressed
[ 214.905816] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702162, rd 2719032, flush 0, corrupt 6, gen 0
[ 235.821052] audit: type=1101 audit(1615530159.873:198): pid=15334 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 235.837726] audit: type=1101 audit(1615530159.883:199): pid=15335 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 235.839752] audit: type=1110 audit(1615530159.883:200): pid=15335 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 235.839758] audit: type=1105 audit(1615530159.883:201): pid=15335 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 235.850195] audit: type=1106 audit(1615530159.893:202): pid=15335 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 235.850247] audit: type=1104 audit(1615530159.893:203): pid=15335 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.329728] audit: type=1101 audit(1615530212.373:204): pid=15428 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.343139] audit: type=1101 audit(1615530212.393:205): pid=15429 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.343560] audit: type=1110 audit(1615530212.393:206): pid=15429 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.344264] audit: type=1105 audit(1615530212.393:207): pid=15429 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.724157] audit: type=1106 audit(1615530212.773:208): pid=15429 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.724215] audit: type=1104 audit(1615530212.773:209): pid=15429 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 637.036465] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79900
[ 638.705872] audit: type=1130 audit(1615530562.759:210): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapper-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 638.738221] audit: type=1130 audit(1615530562.799:211): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapperd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 640.354791] audit: type=1131 audit(1615530564.399:212): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapper-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 700.384996] audit: type=1131 audit(1615530624.439:213): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapperd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 928.732370] audit: type=1130 audit(1615530852.792:214): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 928.732375] audit: type=1131 audit(1615530852.792:215): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 928.907128] audit: type=1130 audit(1615530852.962:216): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=etckeeper comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 928.907135] audit: type=1131 audit(1615530852.962:217): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=etckeeper comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1203.736740] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/0003:1050:0407.0009/input/input40
[ 1203.799110] hid-generic 0003:1050:0407.0009: input,hidraw3: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:1a.7-1.1/input0
[ 1236.318583] attempt to access beyond end of device
sdb1: rw=2049, want=497027080, limit=496091703
[ 1236.318590] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702163, rd 2719032, flush 0, corrupt 6, gen 0
[ 1431.232415] attempt to access beyond end of device
sdb1: rw=2049, want=497027120, limit=496091703
[ 1431.232420] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702164, rd 2719032, flush 0, corrupt 6, gen 0
[ 1508.209634] perf: interrupt took too long (3130 > 3126), lowering kernel.perf_event_max_sample_rate to 63900
[ 1640.339273] attempt to access beyond end of device
sdb1: rw=2049, want=497027080, limit=496091703
[ 1640.339278] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702165, rd 2719032, flush 0, corrupt 6, gen 0
[ 2023.275538] attempt to access beyond end of device
sdb1: rw=2049, want=497027120, limit=496091703
[ 2023.275544] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702166, rd 2719032, flush 0, corrupt 6, gen 0
[ 2035.970288] attempt to access beyond end of device
sdb1: rw=2049, want=497027200, limit=496091703
[ 2035.970295] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702167, rd 2719032, flush 0, corrupt 6, gen 0
[ 2035.987838] attempt to access beyond end of device
sdb1: rw=2049, want=497027208, limit=496091703
[ 2035.987844] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702168, rd 2719032, flush 0, corrupt 6, gen 0
[ 2046.208771] attempt to access beyond end of device
sdb1: rw=2049, want=497027080, limit=496091703
[ 2046.208777] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702169, rd 2719032, flush 0, corrupt 6, gen 0
[ 2061.638792] attempt to access beyond end of device
sdb1: rw=2049, want=497027120, limit=496091703
[ 2061.638797] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702170, rd 2719032, flush 0, corrupt 6, gen 0
[ 2102.394823] attempt to access beyond end of device
sdb1: rw=2049, want=497027080, limit=496091703
[ 2102.394829] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702171, rd 2719032, flush 0, corrupt 6, gen 0
[ 2488.680322] audit: type=1130 audit(1615532412.764:218): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapper-timeline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2488.702156] audit: type=1130 audit(1615532412.784:219): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapperd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2488.705790] audit: type=1131 audit(1615532412.784:220): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapper-timeline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2536.011626] audit: type=1100 audit(1615532460.095:221): pid=18197 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_permit acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 2536.011798] audit: type=1101 audit(1615532460.095:222): pid=18197 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 2536.011835] audit: type=1103 audit(1615532460.095:223): pid=18197 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 2536.011927] audit: type=1006 audit(1615532460.095:224): pid=18197 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=7 res=1
[ 2536.011953] audit: type=1105 audit(1615532460.095:225): pid=18197 uid=0 auid=0 ses=7 msg='op=PAM:session_open grantors=pam_permit,pam_loginuid acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 2536.020808] audit: type=1104 audit(1615532460.105:226): pid=18197 uid=0 auid=0 ses=7 msg='op=PAM:setcred grantors=pam_permit acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 2536.020836] audit: type=1106 audit(1615532460.105:227): pid=18197 uid=0 auid=0 ses=7 msg='op=PAM:session_close grantors=pam_permit,pam_loginuid acct="root" exe="/usr/bin/fcron" hostname=? addr=? terminal=? res=success'
[ 2548.761897] audit: type=1131 audit(1615532472.845:228): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=snapperd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2573.912416] perf: interrupt took too long (3914 > 3912), lowering kernel.perf_event_max_sample_rate to 51100
[ 2763.239931] attempt to access beyond end of device
sdb1: rw=2049, want=497027120, limit=496091703
[ 2763.239938] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702172, rd 2719032, flush 0, corrupt 6, gen 0
[ 2944.218349] attempt to access beyond end of device
sdb1: rw=2049, want=497027080, limit=496091703
[ 2944.218355] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702173, rd 2719032, flush 0, corrupt 6, gen 0
[ 2957.644378] attempt to access beyond end of device
sdb1: rw=2049, want=497027208, limit=496091703
[ 2957.644385] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702174, rd 2719032, flush 0, corrupt 6, gen 0
[ 3297.467464] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/0003:1050:0407.000A/input/input41
[ 3297.539933] hid-generic 0003:1050:0407.000A: input,hidraw3: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:1a.7-1.1/input0
[ 3297.540297] audit: type=1100 audit(1615533221.636:229): pid=19084 uid=1001 auid=1001 ses=2 msg='op=PAM:authentication grantors=pam_yubico acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3297.540631] audit: type=1101 audit(1615533221.636:230): pid=19084 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3297.558333] audit: type=1101 audit(1615533221.656:231): pid=19094 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3297.559418] audit: type=1110 audit(1615533221.656:232): pid=19094 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3297.559422] audit: type=1105 audit(1615533221.656:233): pid=19094 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3297.857330] audit: type=1106 audit(1615533221.946:234): pid=19094 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3297.857336] audit: type=1104 audit(1615533221.946:235): pid=19094 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3301.250474] audit: type=1101 audit(1615533225.346:236): pid=19115 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3301.267280] audit: type=1101 audit(1615533225.356:237): pid=19116 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3301.267924] audit: type=1110 audit(1615533225.356:238): pid=19116 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3322.422584] attempt to access beyond end of device
sdb1: rw=2049, want=497027080, limit=496091703
[ 3322.422590] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719032, flush 0, corrupt 6, gen 0
[ 3345.702100] kauditd_printk_skb: 3 callbacks suppressed
[ 3345.702102] audit: type=1101 audit(1615533269.796:242): pid=19245 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3345.714292] audit: type=1101 audit(1615533269.806:243): pid=19246 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3345.715641] audit: type=1110 audit(1615533269.806:244): pid=19246 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3345.715649] audit: type=1105 audit(1615533269.806:245): pid=19246 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3345.728285] audit: type=1106 audit(1615533269.826:246): pid=19246 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3345.728291] audit: type=1104 audit(1615533269.826:247): pid=19246 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3358.083392] audit: type=1101 audit(1615533282.176:248): pid=19274 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3358.098735] audit: type=1101 audit(1615533282.196:249): pid=19275 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3358.098933] audit: type=1110 audit(1615533282.196:250): pid=19275 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3358.099645] audit: type=1105 audit(1615533282.196:251): pid=19275 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3358.111125] audit: type=1106 audit(1615533282.206:252): pid=19275 uid=1001 auid=1001 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3358.111151] audit: type=1104 audit(1615533282.206:253): pid=19275 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4316.340946] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/0003:1050:0407.000B/input/input42
[ 4316.402834] hid-generic 0003:1050:0407.000B: input,hidraw3: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:1a.7-1.1/input0
[ 4316.403128] audit: type=1100 audit(1615534240.511:254): pid=20270 uid=1001 auid=1001 ses=2 msg='op=PAM:authentication grantors=pam_yubico acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4316.403501] audit: type=1101 audit(1615534240.511:255): pid=20270 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4316.425832] audit: type=1101 audit(1615534240.531:256): pid=20281 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4316.426857] audit: type=1110 audit(1615534240.531:257): pid=20281 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4316.426861] audit: type=1105 audit(1615534240.531:258): pid=20281 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4317.462041] attempt to access beyond end of device
sdb1: rw=524288, want=497859712, limit=496091703
[ 4317.462065] attempt to access beyond end of device
sdb1: rw=524288, want=497859840, limit=496091703
[ 4317.462079] attempt to access beyond end of device
sdb1: rw=256, want=497859704, limit=496091703
[ 4317.462087] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
[ 4317.462090] attempt to access beyond end of device
sdb1: rw=256, want=497859720, limit=496091703
[ 4317.462092] attempt to access beyond end of device
sdb1: rw=524288, want=497859968, limit=496091703
[ 4317.462096] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719034, flush 0, corrupt 6, gen 0
[ 4317.462108] attempt to access beyond end of device
sdb1: rw=256, want=497859728, limit=496091703
[ 4317.462110] attempt to access beyond end of device
sdb1: rw=256, want=497859712, limit=496091703
[ 4317.462113] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719035, flush 0, corrupt 6, gen 0
[ 4317.462115] attempt to access beyond end of device
sdb1: rw=524288, want=497860096, limit=496091703
[ 4317.462118] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719036, flush 0, corrupt 6, gen 0
[ 4317.462126] attempt to access beyond end of device
sdb1: rw=256, want=497859736, limit=496091703
[ 4317.462128] attempt to access beyond end of device
sdb1: rw=256, want=497859848, limit=496091703
[ 4317.462131] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719037, flush 0, corrupt 6, gen 0
[ 4317.462133] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719038, flush 0, corrupt 6, gen 0
[ 4317.462142] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719039, flush 0, corrupt 6, gen 0
[ 4317.462144] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719040, flush 0, corrupt 6, gen 0
[ 4317.462151] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719041, flush 0, corrupt 6, gen 0
[ 4317.462153] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719042, flush 0, corrupt 6, gen 0
[ 4422.451691] handle_bad_sector: 200 callbacks suppressed
[ 4422.451694] attempt to access beyond end of device
sdb1: rw=2049, want=497027120, limit=496091703
[ 4422.451699] btrfs_dev_stat_print_on_error: 190 callbacks suppressed
[ 4422.451702] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702277, rd 2719132, flush 0, corrupt 6, gen 0
[ 4434.754901] attempt to access beyond end of device
sdb1: rw=2049, want=497027208, limit=496091703
[ 4434.754907] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702278, rd 2719132, flush 0, corrupt 6, gen 0
[ 4524.922812] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/0003:1050:0407.000C/input/input43
[ 4524.997891] hid-generic 0003:1050:0407.000C: input,hidraw3: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:1a.7-1.1/input0
[ 4524.998152] audit: type=1100 audit(1615534449.116:259): pid=20816 uid=1001 auid=1001 ses=2 msg='op=PAM:authentication grantors=pam_yubico acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4524.998469] audit: type=1101 audit(1615534449.116:260): pid=20816 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4525.017845] audit: type=1101 audit(1615534449.136:261): pid=20824 uid=1001 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thomas" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4525.019484] audit: type=1110 audit(1615534449.136:262): pid=20824 uid=1001 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_yubico acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4525.019488] audit: type=1105 audit(1615534449.136:263): pid=20824 uid=1001 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4525.024356] audit: type=1100 audit(1615534449.136:264): pid=20829 uid=0 auid=1001 ses=2 msg='op=PAM:authentication grantors=pam_rootok acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4525.024470] audit: type=1101 audit(1615534449.136:265): pid=20829 uid=0 auid=1001 ses=2 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4525.024834] audit: type=1103 audit(1615534449.136:266): pid=20829 uid=0 auid=1001 ses=2 msg='op=PAM:setcred grantors=pam_rootok acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4525.024957] audit: type=1105 audit(1615534449.136:267): pid=20829 uid=0 auid=1001 ses=2 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4539.476135] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4539.476141] floppy: error 10 while reading block 0
[ 4567.404964] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4567.404970] floppy: error 10 while reading block 0
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
2021-03-12 7:47 BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0 Thomas
@ 2021-03-13 6:59 ` Chris Murphy
2021-03-13 7:21 ` Wang Yugui
1 sibling, 0 replies; 8+ messages in thread
From: Chris Murphy @ 2021-03-13 6:59 UTC (permalink / raw)
To: Thomas; +Cc: Btrfs BTRFS
[ 4.365859] usb 8-1: device not accepting address 5, error -71
[ 4.365920] usb usb8-port1: unable to enumerate USB device
[ 4.433539] BTRFS info (device sda1): bdev /dev/sdb1 errs: wr
2701995, rd 2718862, flush 0, corrupt 6, gen 0
/dev/sdb is dropping a lot of reads and writes. Is /dev/sdb in a
SATA-USB enclosure of some kind?
[ 16.914959] blk_update_request: I/O error, dev fd0, sector 0 op
0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 16.914963] floppy: error 10 while reading block 0
Curious but I don't think it's related.
[ 20.685589] attempt to access beyond end of device
sdb1: rw=524288, want=496544128, limit=496091703
[ 20.685798] attempt to access beyond end of device
sdb1: rw=2049, want=496544128, limit=496091703
[ 20.685804] BTRFS error (device sda1): bdev /dev/sdb1 errs: wr
2701996, rd 2718862, flush 0, corrupt 6, gen 0
Something is definitely confused but I'm not sure what or why.
$ sudo btrfs insp dump-s /dev/sdb1 | grep dev_item.total_bytes
Compare that value with (Sectors * 512) from:
$ sudo fdisk -l /dev/sdb
The fdisk number of bytes should be the same as or more than the btrfs bytes.
$ sudo smartctl -x /dev/sdb
That might require installing the smartmontools package.
--
Chris Murphy
--
Chris Murphy
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
2021-03-12 7:47 BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0 Thomas
2021-03-13 6:59 ` Chris Murphy
@ 2021-03-13 7:21 ` Wang Yugui
2021-03-13 12:21 ` Thomas
1 sibling, 1 reply; 8+ messages in thread
From: Wang Yugui @ 2021-03-13 7:21 UTC (permalink / raw)
To: Thomas; +Cc: linux-btrfs
Hi,
If there is some partition size change after filesystem created,
'btrfs filesystem resize max' will help.
See also
https://lore.kernel.org/linux-btrfs/42d37a6393db7ad5d83bc167459c8a5c@steev.me.uk/T/#t
Best Regards
Wang Yugui (wangyugui@e16-tech.com)
2021/03/12
> Hello,
>
> I have observed this error messages in systemd journal:
> BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033,
> flush 0, corrupt 6, gen 0
>
> Here are the bottom lines of journalctl -xb:
> ?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=524288, want=497859712,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=524288, want=497859840,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=256, want=497859704,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=256, want=497859720,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=524288, want=497859968,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719034, flush 0, corrupt 6, gen 0
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=256, want=497859728,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=256, want=497859712,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719035, flush 0, corrupt 6, gen 0
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=524288, want=497860096,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719036, flush 0, corrupt 6, gen 0
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=256, want=497859736,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
> ???????????????????????????????????? sdb1: rw=256, want=497859848,
> limit=496091703
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719037, flush 0, corrupt 6, gen 0
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719038, flush 0, corrupt 6, gen 0
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719039, flush 0, corrupt 6, gen 0
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719040, flush 0, corrupt 6, gen 0
> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
> /dev/sdb1 errs: wr 2702175, rd 2719041, flush 0, corrupt 6, gen 0
>
>
> I have configured a multidrive setup with 2 identical SSDs.
>
> [root@pc1-desktop ~]# uname -a
> Linux pc1-desktop 5.10.22-2-lts #1 SMP Wed, 10 Mar 2021 10:30:57 +0000
> x86_64 GNU/Linux
> [root@pc1-desktop ~]# btrfs --version
> btrfs-progs v5.11
> [root@pc1-desktop ~]# btrfs fi show
> Label: 'archlinux'? uuid: 78462a70-55ad-4444-9d91-e71e42cce51c
> ??? Total devices 2 FS bytes used 178.93GiB
> ??? devid??? 1 size 236.55GiB used 233.50GiB path /dev/sda1
> ??? devid??? 2 size 238.47GiB used 233.50GiB path /dev/sdb1
>
> Label: 'backup'? uuid: de094dc0-58b7-4931-b948-4b920495bf94
> ??? Total devices 1 FS bytes used 210.97GiB
> ??? devid??? 1 size 232.89GiB used 228.87GiB path /dev/sdd
>
> [root@pc1-desktop ~]# btrfs fi df /
> Data, RAID1: total=229.47GiB, used=175.82GiB
> System, RAID1: total=32.00MiB, used=64.00KiB
> Metadata, RAID1: total=4.00GiB, used=3.11GiB
> GlobalReserve, single: total=512.00MiB, used=0.00B
>
>
> Can you please advise how to fix these errors?
>
>
> Regards
> Thomas
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
2021-03-13 7:21 ` Wang Yugui
@ 2021-03-13 12:21 ` Thomas
2021-03-13 18:02 ` Chris Murphy
0 siblings, 1 reply; 8+ messages in thread
From: Thomas @ 2021-03-13 12:21 UTC (permalink / raw)
To: Wang Yugui; +Cc: linux-btrfs
The partitions on both SSD are equal in size:
homas@pc1-desktop:~
$ sudo fdisk -l /dev/sda
Festplatte /dev/sda: 238,47 GiB, 256060514304 Bytes, 500118192 Sektoren
Festplattenmodell: SanDisk SD8SBAT2
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0x0914a19b
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sda1 * 2048 496093750 496091703 236,6G 83 Linux
/dev/sda2 496095232 500118191 4022960 1,9G 82 Linux Swap / Solaris
thomas@pc1-desktop:~
$ sudo fdisk -l /dev/sdb
Festplatte /dev/sdb: 238,47 GiB, 256060514304 Bytes, 500118192 Sektoren
Festplattenmodell: SanDisk SD9TB8W2
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0xf23fc590
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sdb1 2048 496093750 496091703 236,6G 83 Linux
However the output of btrfs insp dump-s <device> is different:
thomas@pc1-desktop:~
$ sudo btrfs insp dump-s /dev/sdb1 | grep dev_item.total_bytes
dev_item.total_bytes 256059465728
thomas@pc1-desktop:~
$ sudo btrfs insp dump-s /dev/sda1 | grep dev_item.total_bytes
dev_item.total_bytes 253998948352
Am 13.03.21 um 08:21 schrieb Wang Yugui:
> Hi,
>
> If there is some partition size change after filesystem created,
> 'btrfs filesystem resize max' will help.
>
> See also
> https://lore.kernel.org/linux-btrfs/42d37a6393db7ad5d83bc167459c8a5c@steev.me.uk/T/#t
>
>
> Best Regards
> Wang Yugui (wangyugui@e16-tech.com)
> 2021/03/12
>
>> Hello,
>>
>> I have observed this error messages in systemd journal:
>> BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033,
>> flush 0, corrupt 6, gen 0
>>
>> Here are the bottom lines of journalctl -xb:
>> ?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=524288, want=497859712,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=524288, want=497859840,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=256, want=497859704,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=256, want=497859720,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=524288, want=497859968,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719034, flush 0, corrupt 6, gen 0
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=256, want=497859728,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=256, want=497859712,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719035, flush 0, corrupt 6, gen 0
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=524288, want=497860096,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719036, flush 0, corrupt 6, gen 0
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=256, want=497859736,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: attempt to access beyond end of device
>> ???????????????????????????????????? sdb1: rw=256, want=497859848,
>> limit=496091703
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719037, flush 0, corrupt 6, gen 0
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719038, flush 0, corrupt 6, gen 0
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719039, flush 0, corrupt 6, gen 0
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719040, flush 0, corrupt 6, gen 0
>> M?r 12 08:30:41 pc1-desktop kernel: BTRFS error (device sda1): bdev
>> /dev/sdb1 errs: wr 2702175, rd 2719041, flush 0, corrupt 6, gen 0
>>
>>
>> I have configured a multidrive setup with 2 identical SSDs.
>>
>> [root@pc1-desktop ~]# uname -a
>> Linux pc1-desktop 5.10.22-2-lts #1 SMP Wed, 10 Mar 2021 10:30:57 +0000
>> x86_64 GNU/Linux
>> [root@pc1-desktop ~]# btrfs --version
>> btrfs-progs v5.11
>> [root@pc1-desktop ~]# btrfs fi show
>> Label: 'archlinux'? uuid: 78462a70-55ad-4444-9d91-e71e42cce51c
>> ??? Total devices 2 FS bytes used 178.93GiB
>> ??? devid??? 1 size 236.55GiB used 233.50GiB path /dev/sda1
>> ??? devid??? 2 size 238.47GiB used 233.50GiB path /dev/sdb1
>>
>> Label: 'backup'? uuid: de094dc0-58b7-4931-b948-4b920495bf94
>> ??? Total devices 1 FS bytes used 210.97GiB
>> ??? devid??? 1 size 232.89GiB used 228.87GiB path /dev/sdd
>>
>> [root@pc1-desktop ~]# btrfs fi df /
>> Data, RAID1: total=229.47GiB, used=175.82GiB
>> System, RAID1: total=32.00MiB, used=64.00KiB
>> Metadata, RAID1: total=4.00GiB, used=3.11GiB
>> GlobalReserve, single: total=512.00MiB, used=0.00B
>>
>>
>> Can you please advise how to fix these errors?
>>
>>
>> Regards
>> Thomas
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
2021-03-13 12:21 ` Thomas
@ 2021-03-13 18:02 ` Chris Murphy
2021-03-20 9:53 ` Thomas Schneider
2021-04-02 20:46 ` Thomas
0 siblings, 2 replies; 8+ messages in thread
From: Chris Murphy @ 2021-03-13 18:02 UTC (permalink / raw)
To: Thomas; +Cc: Wang Yugui, Btrfs BTRFS
On Sat, Mar 13, 2021 at 5:22 AM Thomas <74cmonty@gmail.com> wrote:
> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
> /dev/sdb1 2048 496093750 496091703 236,6G 83 Linux
> However the output of btrfs insp dump-s <device> is different:
> thomas@pc1-desktop:~
> $ sudo btrfs insp dump-s /dev/sdb1 | grep dev_item.total_bytes
> dev_item.total_bytes 256059465728
sdb1 has 253998951936 bytes which is *less* than the btrfs super block
is saying it should be. 1.919 GiB less. I'm going to guess that the
sdb1 partition was reduced without first shrinking the file system.
The most common way this happens is not realizing that each member
device of a btrfs file system must be separately shrunk. If you do not
specify a devid, then devid 1 is assumed.
man btrfs filesystem
"The devid can be found in the output of btrfs filesystem show and
defaults to 1 if not specified."
I bet that the file system was shunk one time, this shrunk only devid
1 which is also /dev/sda1. But then both partitions were shrunk
thereby truncating sdb1, resulting in these errors.
If that's correct, you need to change the sdb1 partition back to its
original size (matching the size of the sdb1 btrfs superblock). Scrub
the file system so sdb1 can be repaired from any prior damage from the
mistake. Shrink this devid to match the size of the other devid, and
then change the partition.
> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
> /dev/sda1 * 2048 496093750 496091703 236,6G 83 Linux
>
> thomas@pc1-desktop:~
> $ sudo btrfs insp dump-s /dev/sda1 | grep dev_item.total_bytes
> dev_item.total_bytes 253998948352
This is fine. The file system is 3584 bytes less than the partition.
I'm not sure why it doesn't end on a 4KiB block boundary or why
there's a gap before the start of sda2...but at least it's benign.
--
Chris Murphy
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
2021-03-13 18:02 ` Chris Murphy
@ 2021-03-20 9:53 ` Thomas Schneider
2021-04-02 20:46 ` Thomas
1 sibling, 0 replies; 8+ messages in thread
From: Thomas Schneider @ 2021-03-20 9:53 UTC (permalink / raw)
To: Chris Murphy; +Cc: Wang Yugui, Btrfs BTRFS
Hello Chris,
many thanks for your analysis.
I'm not sure how to proceed in order to fix this error.
Obviously both devices, sda and sdb, are not partitioned 100%
correct/optimal.
Therefore I consider to restart from scratch, means
- creating a file backup of OS
- deleting any partion on sda and sdb
- create 2 partitions on sda, part #1 for OS + part #2 for swap
(swapfile is not working with BTRFS on multiple drives)
- restoring the (file) backup
Question:
Would you recommend to create a swap partition on sdb, too?
Regards
Thomas
Am 13.03.2021 um 19:02 schrieb Chris Murphy:
> On Sat, Mar 13, 2021 at 5:22 AM Thomas <74cmonty@gmail.com> wrote:
>
>> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
>> /dev/sdb1 2048 496093750 496091703 236,6G 83 Linux
>> However the output of btrfs insp dump-s <device> is different:
>> thomas@pc1-desktop:~
>> $ sudo btrfs insp dump-s /dev/sdb1 | grep dev_item.total_bytes
>> dev_item.total_bytes 256059465728
> sdb1 has 253998951936 bytes which is *less* than the btrfs super block
> is saying it should be. 1.919 GiB less. I'm going to guess that the
> sdb1 partition was reduced without first shrinking the file system.
> The most common way this happens is not realizing that each member
> device of a btrfs file system must be separately shrunk. If you do not
> specify a devid, then devid 1 is assumed.
>
> man btrfs filesystem
> "The devid can be found in the output of btrfs filesystem show and
> defaults to 1 if not specified."
>
> I bet that the file system was shunk one time, this shrunk only devid
> 1 which is also /dev/sda1. But then both partitions were shrunk
> thereby truncating sdb1, resulting in these errors.
>
> If that's correct, you need to change the sdb1 partition back to its
> original size (matching the size of the sdb1 btrfs superblock). Scrub
> the file system so sdb1 can be repaired from any prior damage from the
> mistake. Shrink this devid to match the size of the other devid, and
> then change the partition.
>
>
>
>> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
>> /dev/sda1 * 2048 496093750 496091703 236,6G 83 Linux
>>
>> thomas@pc1-desktop:~
>> $ sudo btrfs insp dump-s /dev/sda1 | grep dev_item.total_bytes
>> dev_item.total_bytes 253998948352
> This is fine. The file system is 3584 bytes less than the partition.
> I'm not sure why it doesn't end on a 4KiB block boundary or why
> there's a gap before the start of sda2...but at least it's benign.
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
2021-03-13 18:02 ` Chris Murphy
2021-03-20 9:53 ` Thomas Schneider
@ 2021-04-02 20:46 ` Thomas
2021-04-03 17:28 ` Lukas Straub
1 sibling, 1 reply; 8+ messages in thread
From: Thomas @ 2021-04-02 20:46 UTC (permalink / raw)
To: Chris Murphy; +Cc: Btrfs BTRFS
Hi,
I finished repartition of devices /dev/sda + /dev/sdb now.
On both devices the first partition is equal in size:
$ sudo fdisk -l /dev/sda
Festplatte /dev/sda: 238,47 GiB, 256060514304 Bytes, 500118192 Sektoren
Festplattenmodell: SanDisk SD8SBAT2
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0x0914a19b
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sda1 2048 497027071 497025024 237G 83 Linux
/dev/sda2 497027072 500118191 3091120 1,5G 82 Linux Swap / Solaris
$ sudo fdisk -l /dev/sdb
Festplatte /dev/sdb: 238,47 GiB, 256060514304 Bytes, 500118192 Sektoren
Festplattenmodell: SanDisk SD9TB8W2
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0xf23fc590
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sdb1 2048 497027071 497025024 237G 83 Linux
However, the output of btrfs insp dump-s <device> is still different:
$ sudo btrfs insp dump-s /dev/sda1 | grep dev_item.total_bytes
dev_item.total_bytes 254476812288
$ sudo btrfs insp dump-s /dev/sdb1 | grep dev_item.total_bytes
dev_item.total_bytes 256059465728
Can you please advise how to fix this?
My understanding is that size of btrfs superblock must be equal on both
devices.
THX
Am 13.03.21 um 19:02 schrieb Chris Murphy:
> On Sat, Mar 13, 2021 at 5:22 AM Thomas <74cmonty@gmail.com> wrote:
>
>> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
>> /dev/sdb1 2048 496093750 496091703 236,6G 83 Linux
>> However the output of btrfs insp dump-s <device> is different:
>> thomas@pc1-desktop:~
>> $ sudo btrfs insp dump-s /dev/sdb1 | grep dev_item.total_bytes
>> dev_item.total_bytes 256059465728
> sdb1 has 253998951936 bytes which is *less* than the btrfs super block
> is saying it should be. 1.919 GiB less. I'm going to guess that the
> sdb1 partition was reduced without first shrinking the file system.
> The most common way this happens is not realizing that each member
> device of a btrfs file system must be separately shrunk. If you do not
> specify a devid, then devid 1 is assumed.
>
> man btrfs filesystem
> "The devid can be found in the output of btrfs filesystem show and
> defaults to 1 if not specified."
>
> I bet that the file system was shunk one time, this shrunk only devid
> 1 which is also /dev/sda1. But then both partitions were shrunk
> thereby truncating sdb1, resulting in these errors.
>
> If that's correct, you need to change the sdb1 partition back to its
> original size (matching the size of the sdb1 btrfs superblock). Scrub
> the file system so sdb1 can be repaired from any prior damage from the
> mistake. Shrink this devid to match the size of the other devid, and
> then change the partition.
>
>
>
>> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
>> /dev/sda1 * 2048 496093750 496091703 236,6G 83 Linux
>>
>> thomas@pc1-desktop:~
>> $ sudo btrfs insp dump-s /dev/sda1 | grep dev_item.total_bytes
>> dev_item.total_bytes 253998948352
> This is fine. The file system is 3584 bytes less than the partition.
> I'm not sure why it doesn't end on a 4KiB block boundary or why
> there's a gap before the start of sda2...but at least it's benign.
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0
2021-04-02 20:46 ` Thomas
@ 2021-04-03 17:28 ` Lukas Straub
0 siblings, 0 replies; 8+ messages in thread
From: Lukas Straub @ 2021-04-03 17:28 UTC (permalink / raw)
To: Thomas; +Cc: Chris Murphy, Btrfs BTRFS
[-- Attachment #1: Type: text/plain, Size: 4273 bytes --]
On Fri, 2 Apr 2021 22:46:25 +0200
Thomas <74cmonty@gmail.com> wrote:
> Hi,
>
> I finished repartition of devices /dev/sda + /dev/sdb now.
> On both devices the first partition is equal in size:
> $ sudo fdisk -l /dev/sda
> Festplatte /dev/sda: 238,47 GiB, 256060514304 Bytes, 500118192 Sektoren
> Festplattenmodell: SanDisk SD8SBAT2
> Einheiten: Sektoren von 1 * 512 = 512 Bytes
> Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
> E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
> Festplattenbezeichnungstyp: dos
> Festplattenbezeichner: 0x0914a19b
>
> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
> /dev/sda1 2048 497027071 497025024 237G 83 Linux
> /dev/sda2 497027072 500118191 3091120 1,5G 82 Linux Swap / Solaris
>
>
> $ sudo fdisk -l /dev/sdb
> Festplatte /dev/sdb: 238,47 GiB, 256060514304 Bytes, 500118192 Sektoren
> Festplattenmodell: SanDisk SD9TB8W2
> Einheiten: Sektoren von 1 * 512 = 512 Bytes
> Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
> E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
> Festplattenbezeichnungstyp: dos
> Festplattenbezeichner: 0xf23fc590
>
> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
> /dev/sdb1 2048 497027071 497025024 237G 83 Linux
>
>
> However, the output of btrfs insp dump-s <device> is still different:
> $ sudo btrfs insp dump-s /dev/sda1 | grep dev_item.total_bytes
> dev_item.total_bytes 254476812288
>
> $ sudo btrfs insp dump-s /dev/sdb1 | grep dev_item.total_bytes
> dev_item.total_bytes 256059465728
Interesting, this is again larger than the partition!
Did you actually run mkfs.btrfs after formating? Else it might still be
reading the old filesystem's superblock (just repartitioning does not
erase that).
>
> Can you please advise how to fix this?
> My understanding is that size of btrfs superblock must be equal on both
> devices.
No, it's not a problem if the disks have different sizes. You have a
different problem here.
Regards,
Lukas Straub
>
> THX
>
>
> Am 13.03.21 um 19:02 schrieb Chris Murphy:
> > On Sat, Mar 13, 2021 at 5:22 AM Thomas <74cmonty@gmail.com> wrote:
> >
> >> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
> >> /dev/sdb1 2048 496093750 496091703 236,6G 83 Linux
> >> However the output of btrfs insp dump-s <device> is different:
> >> thomas@pc1-desktop:~
> >> $ sudo btrfs insp dump-s /dev/sdb1 | grep dev_item.total_bytes
> >> dev_item.total_bytes 256059465728
> > sdb1 has 253998951936 bytes which is *less* than the btrfs super block
> > is saying it should be. 1.919 GiB less. I'm going to guess that the
> > sdb1 partition was reduced without first shrinking the file system.
> > The most common way this happens is not realizing that each member
> > device of a btrfs file system must be separately shrunk. If you do not
> > specify a devid, then devid 1 is assumed.
> >
> > man btrfs filesystem
> > "The devid can be found in the output of btrfs filesystem show and
> > defaults to 1 if not specified."
> >
> > I bet that the file system was shunk one time, this shrunk only devid
> > 1 which is also /dev/sda1. But then both partitions were shrunk
> > thereby truncating sdb1, resulting in these errors.
> >
> > If that's correct, you need to change the sdb1 partition back to its
> > original size (matching the size of the sdb1 btrfs superblock). Scrub
> > the file system so sdb1 can be repaired from any prior damage from the
> > mistake. Shrink this devid to match the size of the other devid, and
> > then change the partition.
> >
> >
> >
> >> Gerät Boot Anfang Ende Sektoren Größe Kn Typ
> >> /dev/sda1 * 2048 496093750 496091703 236,6G 83 Linux
> >>
> >> thomas@pc1-desktop:~
> >> $ sudo btrfs insp dump-s /dev/sda1 | grep dev_item.total_bytes
> >> dev_item.total_bytes 253998948352
> > This is fine. The file system is 3584 bytes less than the partition.
> > I'm not sure why it doesn't end on a 4KiB block boundary or why
> > there's a gap before the start of sda2...but at least it's benign.
> >
> >
>
--
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-04-03 17:29 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-03-12 7:47 BTRFS error (device sda1): bdev /dev/sdb1 errs: wr 2702175, rd 2719033, flush 0, corrupt 6, gen 0 Thomas
2021-03-13 6:59 ` Chris Murphy
2021-03-13 7:21 ` Wang Yugui
2021-03-13 12:21 ` Thomas
2021-03-13 18:02 ` Chris Murphy
2021-03-20 9:53 ` Thomas Schneider
2021-04-02 20:46 ` Thomas
2021-04-03 17:28 ` Lukas Straub
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).