Re: [PATCH v2 16/22] btrfs: Use alloc_ordered_workqueue() to create ordered workqueues

[Wang Yugui <wangyugui@e16-tech.com>]

Hi,

> BACKGROUND
> ==========
> 
> When multiple work items are queued to a workqueue, their execution order
> doesn't match the queueing order. They may get executed in any order and
> simultaneously. When fully serialized execution - one by one in the queueing
> order - is needed, an ordered workqueue should be used which can be created
> with alloc_ordered_workqueue().
> 
> However, alloc_ordered_workqueue() was a later addition. Before it, an
> ordered workqueue could be obtained by creating an UNBOUND workqueue with
> @max_active==1. This originally was an implementation side-effect which was
> broken by 4c16bd327c74 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
> ordered"). Because there were users that depended on the ordered execution,
> 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
> made workqueue allocation path to implicitly promote UNBOUND workqueues w/
> @max_active==1 to ordered workqueues.
> 
> While this has worked okay, overloading the UNBOUND allocation interface
> this way creates other issues. It's difficult to tell whether a given
> workqueue actually needs to be ordered and users that legitimately want a
> min concurrency level wq unexpectedly gets an ordered one instead. With
> planned UNBOUND workqueue updates to improve execution locality and more
> prevalence of chiplet designs which can benefit from such improvements, this
> isn't a state we wanna be in forever.
> 
> This patch series audits all callsites that create an UNBOUND workqueue w/
> @max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
> 
> WHAT TO LOOK FOR
> ================
> 
> The conversions are from
> 
>   alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
> 
> to 
> 
>   alloc_ordered_workqueue(flags, args...)
> 
> which don't cause any functional changes. If you know that fully ordered
> execution is not ncessary, please let me know. I'll drop the conversion and
> instead add a comment noting the fact to reduce confusion while conversion
> is in progress.
> 
> If you aren't fully sure, it's completely fine to let the conversion
> through. The behavior will stay exactly the same and we can always
> reconsider later.
> 
> As there are follow-up workqueue core changes, I'd really appreciate if the
> patch can be routed through the workqueue tree w/ your acks. Thanks.
> 
> v2: btrfs_alloc_workqueue() updated too as suggested by Wang.
> 
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Wang Yugui <wangyugui@e16-tech.com>
> Cc: Chris Mason <clm@fb.com>
> Cc: Josef Bacik <josef@toxicpanda.com>
> Cc: David Sterba <dsterba@suse.com>
> Cc: linux-btrfs@vger.kernel.org
> ---
> Hello,
> 
> Wang, yeah, that's a helper that can't tell whether the caller wants an
> ordered wq or not, so it needs to be updated too. How does this look?
> 
> Thanks.
> 
>  fs/btrfs/async-thread.c |    7 +++++--
>  fs/btrfs/disk-io.c      |    2 +-
>  fs/btrfs/scrub.c        |    6 ++++--
>  3 files changed, 10 insertions(+), 5 deletions(-)
> 
> --- a/fs/btrfs/async-thread.c
> +++ b/fs/btrfs/async-thread.c
> @@ -99,8 +99,11 @@ struct btrfs_workqueue *btrfs_alloc_work
>  		ret->thresh = thresh;
>  	}
>  
> -	ret->normal_wq = alloc_workqueue("btrfs-%s", flags, ret->current_active,
> -					 name);
> +	if (ret->current_active == 1)
> +		ret->normal_wq = alloc_ordered_workqueue("btrfs-%s", flags, name);
> +	else
> +		ret->normal_wq = alloc_workqueue("btrfs-%s", flags,
> +						 ret->current_active, name);
>  	if (!ret->normal_wq) {
>  		kfree(ret);
>  		return NULL;

by test, I noticed some warning caused by
void workqueue_set_max_active(struct workqueue_struct *wq, int max_active)
	if (WARN_ON(wq->flags & __WQ_ORDERED_EXPLICIT))
		return;

so I tested again  with the flowing fix

diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 43c8995..e4b68e9 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -99,8 +99,11 @@ struct btrfs_workqueue *btrfs_alloc_workqueue(struct btrfs_fs_info *fs_info,
 		ret->thresh = thresh;
 	}
 
-	ret->normal_wq = alloc_workqueue("btrfs-%s", flags, ret->current_active,
-					 name);
+	if(limit_active == 1)
+		ret->normal_wq = alloc_ordered_workqueue("btrfs-%s", flags, name);
+	else
+		ret->normal_wq = alloc_workqueue("btrfs-%s", flags,
+					 ret->current_active, name);
 	if (!ret->normal_wq) {
 		kfree(ret);
 		return NULL;
@@ -139,7 +139,7 @@ static inline void thresh_exec_hook(struct btrfs_workqueue *wq)
 	long pending;
 	int need_change = 0;
 
-	if (wq->thresh == NO_THRESHOLD)
+	if (wq->thresh == NO_THRESHOLD || wq->limit_active == 1)
 		return;
 
 	atomic_dec(&wq->pending);

we need 'limit_active' at 2nd postition, so I used 'limit_active' and 1st
postition too.

Best Regards
Wang Yugui (wangyugui@e16-tech.com)
2023/05/06



> --- a/fs/btrfs/disk-io.c
> +++ b/fs/btrfs/disk-io.c
> @@ -2218,7 +2218,7 @@ static int btrfs_init_workqueues(struct
>  	fs_info->qgroup_rescan_workers =
>  		btrfs_alloc_workqueue(fs_info, "qgroup-rescan", flags, 1, 0);
>  	fs_info->discard_ctl.discard_workers =
> -		alloc_workqueue("btrfs_discard", WQ_UNBOUND | WQ_FREEZABLE, 1);
> +		alloc_ordered_workqueue("btrfs_discard", WQ_FREEZABLE);
>  
>  	if (!(fs_info->workers && fs_info->hipri_workers &&
>  	      fs_info->delalloc_workers && fs_info->flush_workers &&
> --- a/fs/btrfs/scrub.c
> +++ b/fs/btrfs/scrub.c
> @@ -4245,8 +4245,10 @@ static noinline_for_stack int scrub_work
>  	if (refcount_inc_not_zero(&fs_info->scrub_workers_refcnt))
>  		return 0;
>  
> -	scrub_workers = alloc_workqueue("btrfs-scrub", flags,
> -					is_dev_replace ? 1 : max_active);
> +	if (is_dev_replace)
> +		scrub_workers = alloc_ordered_workqueue("btrfs-scrub", flags);
> +	else
> +		scrub_workers = alloc_workqueue("btrfs-scrub", flags, max_active);
>  	if (!scrub_workers)
>  		goto fail_scrub_workers;
>