From: Johannes Thumshirn <jth@kernel.org>
To: Chris Mason <clm@fb.com>, Josef Bacik <josef@toxicpanda.com>,
David Sterba <dsterba@suse.com>
Cc: linux-btrfs@vger.kernel.org, linux-kernel@vger.kernel.org,
Johannes Thumshirn <johannes.thumshirn@wdc.com>
Subject: [PATCH v3 4/5] btrfs: don't hold dev_replace rwsem over whole of btrfs_map_block
Date: Mon, 01 Jul 2024 12:25:18 +0200 [thread overview]
Message-ID: <20240701-b4-rst-updates-v3-4-e0437e1e04a6@kernel.org> (raw)
In-Reply-To: <20240701-b4-rst-updates-v3-0-e0437e1e04a6@kernel.org>
From: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Don't hold the dev_replace rwsem for the entirety of btrfs_map_block().
It is only needed to protect
a) calls to find_live_mirror() and
b) calling into handle_ops_on_dev_replace().
But there is no need to hold the rwsem for any kind of set_io_stripe()
calls.
So relax taking the dev_replace rwsem to only protect both cases and check
if the device replace status has changed in the meantime, for which we have
to re-do the find_live_mirror() calls.
This fixes a deadlock on raid-stripe-tree where device replace performs a
scrub operation, which in turn calls into btrfs_map_block() to find the
physical location of the block.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
fs/btrfs/volumes.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index fcedc43ef291..4209419244a1 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -6650,14 +6650,9 @@ int btrfs_map_block(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
max_len = btrfs_max_io_len(map, map_offset, &io_geom);
*length = min_t(u64, map->chunk_len - map_offset, max_len);
+again:
down_read(&dev_replace->rwsem);
dev_replace_is_ongoing = btrfs_dev_replace_is_ongoing(dev_replace);
- /*
- * Hold the semaphore for read during the whole operation, write is
- * requested at commit time but must wait.
- */
- if (!dev_replace_is_ongoing)
- up_read(&dev_replace->rwsem);
switch (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) {
case BTRFS_BLOCK_GROUP_RAID0:
@@ -6695,6 +6690,7 @@ int btrfs_map_block(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
"stripe index math went horribly wrong, got stripe_index=%u, num_stripes=%u",
io_geom.stripe_index, map->num_stripes);
ret = -EINVAL;
+ up_read(&dev_replace->rwsem);
goto out;
}
@@ -6710,6 +6706,8 @@ int btrfs_map_block(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
*/
num_alloc_stripes += 2;
+ up_read(&dev_replace->rwsem);
+
/*
* If this I/O maps to a single device, try to return the device and
* physical block information on the stack instead of allocating an
@@ -6782,6 +6780,18 @@ int btrfs_map_block(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
goto out;
}
+ /*
+ * Check if something changed the dev_replace state since
+ * we've checked it for the last time and if redo the whole
+ * mapping operation.
+ */
+ down_read(&dev_replace->rwsem);
+ if (dev_replace_is_ongoing !=
+ btrfs_dev_replace_is_ongoing(dev_replace)) {
+ up_read(&dev_replace->rwsem);
+ goto again;
+ }
+
if (op != BTRFS_MAP_READ)
io_geom.max_errors = btrfs_chunk_max_errors(map);
@@ -6789,6 +6799,7 @@ int btrfs_map_block(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
op != BTRFS_MAP_READ) {
handle_ops_on_dev_replace(bioc, dev_replace, logical, &io_geom);
}
+ up_read(&dev_replace->rwsem);
*bioc_ret = bioc;
bioc->num_stripes = io_geom.num_stripes;
@@ -6796,11 +6807,6 @@ int btrfs_map_block(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
bioc->mirror_num = io_geom.mirror_num;
out:
- if (dev_replace_is_ongoing) {
- lockdep_assert_held(&dev_replace->rwsem);
- /* Unlock and let waiting writers proceed */
- up_read(&dev_replace->rwsem);
- }
btrfs_free_chunk_map(map);
return ret;
}
--
2.43.0
next prev parent reply other threads:[~2024-07-01 10:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-01 10:25 [PATCH v3 0/5] btrfs: rst: updates for RAID stripe tree Johannes Thumshirn
2024-07-01 10:25 ` [PATCH v3 1/5] btrfs: replace stripe extents Johannes Thumshirn
2024-07-01 13:57 ` Josef Bacik
2024-07-01 15:08 ` Johannes Thumshirn
2024-07-01 20:34 ` Josef Bacik
2024-07-01 20:37 ` Josef Bacik
2024-07-02 5:41 ` Johannes Thumshirn
2024-07-01 10:25 ` [PATCH v3 2/5] btrfs: split RAID stripes on deletion Johannes Thumshirn
2024-07-01 14:07 ` Josef Bacik
2024-07-03 15:47 ` Johannes Thumshirn
2024-07-01 10:25 ` [PATCH v3 3/5] btrfs: stripe-tree: add selftests Johannes Thumshirn
2024-07-01 14:08 ` Josef Bacik
2024-07-01 15:09 ` Johannes Thumshirn
2024-07-01 10:25 ` Johannes Thumshirn [this message]
2024-07-01 14:13 ` [PATCH v3 4/5] btrfs: don't hold dev_replace rwsem over whole of btrfs_map_block Josef Bacik
2024-07-01 10:25 ` [PATCH v3 5/5] btrfs: rst: don't print tree dump in case lookup fails Johannes Thumshirn
2024-07-01 14:12 ` Josef Bacik
2024-07-01 15:03 ` Johannes Thumshirn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240701-b4-rst-updates-v3-4-e0437e1e04a6@kernel.org \
--to=jth@kernel.org \
--cc=clm@fb.com \
--cc=dsterba@suse.com \
--cc=johannes.thumshirn@wdc.com \
--cc=josef@toxicpanda.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox