* system crash on replace
@ 2016-06-23 17:44 Steven Haigh
2016-06-23 18:35 ` Austin S. Hemmelgarn
0 siblings, 1 reply; 5+ messages in thread
From: Steven Haigh @ 2016-06-23 17:44 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1.1: Type: text/plain, Size: 8668 bytes --]
Hi all,
Relative newbie to BTRFS, but long time linux user. I pass the full
disks from a Xen Dom0 -> guest DomU and run BTRFS within the DomU.
I've migrated my existing mdadm RAID6 to a BTRFS raid6 layout. I have a
drive that threw a few UNC errors during a subsequent balance, so I've
pulled that drive, dd /dev/zero to it, then trying to add it back in to
the BTRFS system via:
btrfs replace start 4 /dev/xvdf /mnt/fileshare
The command gets accepted and the replace starts - however apart from it
being at a glacial pace, it seems to hang the system hard with the
following output:
zeus login: BTRFS info (device xvdc): not using ssd allocation scheme
BTRFS info (device xvdc): disk space caching is enabled
BUG: unable to handle kernel paging request at ffffc90040eed000
IP: [<ffffffff81332292>] __memcpy+0x12/0x20
PGD 7fbc6067 PUD 7ce9e067 PMD 7b6d6067 PTE 0
Oops: 0002 [#1] SMP
Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs
aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper cryptd
pcspkr raid6_pq nfsd auth
_rpcgss nfs_acl lockd grace sunrpc ip_tables xen_netfront crc32c_intel
xen_gntalloc xen_evtchn ipv6 autofs4
CPU: 1 PID: 2271 Comm: kworker/u4:4 Not tainted 4.4.13-1.el7xen.x86_64 #1
Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: ffff88005b978000
RIP: e030:[<ffffffff81332292>] [<ffffffff81332292>] __memcpy+0x12/0x20
RSP: e02b:ffff88005b97bc60 EFLAGS: 00010246
RAX: ffffc90040eecff8 RBX: 0000000000001000 RCX: 00000000000001ff
RDX: 0000000000000000 RSI: ffff88004e4ec008 RDI: ffffc90040eed000
RBP: ffff88005b97bd28 R08: ffffc90040eeb000 R09: 00000000607a06e1
R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000000000
R13: 00000000607a26d9 R14: 00000000607a26e1 R15: ffff880062c613d8
FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc90040eed000 CR3: 0000000056004000 CR4: 0000000000042660
Stack:
ffffffffa05afc77 ffff88005b97bc90 ffffffff81190a14 0000160000000000
ffff88005ba01900 0000000000000000 00000000607a06e1 ffffc90040eeb000
0000000000000002 000000000000001b 0000000000000000 0000002000000001
Call Trace:
[<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs]
[<ffffffff81190a14>] ? vmalloc+0x54/0x60
[<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs]
[<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0
[<ffffffff812f40c0>] bio_endio+0x40/0x60
[<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs]
[<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs]
[<ffffffff810a1352>] ? finish_task_switch+0x82/0x280
[<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs]
[<ffffffff81093844>] process_one_work+0x154/0x400
[<ffffffff8109438a>] worker_thread+0x11a/0x460
[<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0
[<ffffffff810993f9>] kthread+0xc9/0xe0
[<ffffffff81099330>] ? kthread_park+0x60/0x60
[<ffffffff8165e14f>] ret_from_fork+0x3f/0x70
[<ffffffff81099330>] ? kthread_park+0x60/0x60
Code: 74 0e 48 8b 43 60 48 2b 43 50 88 43 4e 5b 5d c3 e8 b4 fc ff ff eb
eb 90 90 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48
a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3
RIP [<ffffffff81332292>] __memcpy+0x12/0x20
RSP <ffff88005b97bc60>
CR2: ffffc90040eed000
---[ end trace 001cc830ec804da7 ]---
BUG: unable to handle kernel paging request at ffffffffffffffd8
IP: [<ffffffff81099b60>] kthread_data+0x10/0x20
PGD 188d067 PUD 188f067 PMD 0
Oops: 0000 [#2] SMP
Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs
aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper cryptd
pcspkr raid6_pq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables
xen_netfront crc32c_intel xen_gntalloc xen_evtchn ipv6 autofs4
CPU: 1 PID: 2271 Comm: kworker/u4:4 Tainted: G D
4.4.13-1.el7xen.x86_64 #1
task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: ffff88005b978000
RIP: e030:[<ffffffff81099b60>] [<ffffffff81099b60>] kthread_data+0x10/0x20
RSP: e02b:ffff88005b97b980 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
RDX: ffffffff81bd5080 RSI: 0000000000000001 RDI: ffff88007c5c83c0
RBP: ffff88005b97b980 R08: 0000000000000001 R09: 000013f6a632677e
R10: 000000000000001f R11: 0000000000000000 R12: ffff88007c5c83c0
R13: 0000000000000000 R14: 00000000000163c0 R15: 0000000000000001
FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000056004000 CR4: 0000000000042660
Stack:
ffff88005b97b998 ffffffff81094751 ffff88007f5163c0 ffff88005b97b9e0
ffffffff8165a34f ffff88007b678448 ffff88007c5c83c0 ffff88005b97c000
ffff88007c5c8710 0000000000000000 ffff88007c5c83c0 ffff88007cffacc0
Call Trace:
[<ffffffff81094751>] wq_worker_sleeping+0x11/0x90
[<ffffffff8165a34f>] __schedule+0x3bf/0x880
[<ffffffff8165a845>] schedule+0x35/0x80
[<ffffffff8107fc3f>] do_exit+0x65f/0xad0
[<ffffffff8101a5ea>] oops_end+0x9a/0xd0
[<ffffffff8105f7ad>] no_context+0x10d/0x360
[<ffffffff8105fb09>] __bad_area_nosemaphore+0x109/0x210
[<ffffffff8105fc23>] bad_area_nosemaphore+0x13/0x20
[<ffffffff81060200>] __do_page_fault+0x80/0x3f0
[<ffffffff8118e3a4>] ? vmap_page_range_noflush+0x284/0x390
[<ffffffff81060592>] do_page_fault+0x22/0x30
[<ffffffff8165fea8>] page_fault+0x28/0x30
[<ffffffff81332292>] ? __memcpy+0x12/0x20
[<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs]
[<ffffffff81190a14>] ? vmalloc+0x54/0x60
[<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs]
[<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0
[<ffffffff812f40c0>] bio_endio+0x40/0x60
[<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs]
[<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs]
[<ffffffff810a1352>] ? finish_task_switch+0x82/0x280
[<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs]
[<ffffffff81093844>] process_one_work+0x154/0x400
[<ffffffff8109438a>] worker_thread+0x11a/0x460
[<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0
[<ffffffff810993f9>] kthread+0xc9/0xe0
[<ffffffff81099330>] ? kthread_park+0x60/0x60
[<ffffffff8165e14f>] ret_from_fork+0x3f/0x70
[<ffffffff81099330>] ? kthread_park+0x60/0x60
Code: ff ff eb 92 be 3a 02 00 00 48 c7 c7 de 81 7a 81 e8 d6 34 fe ff e9
d5 fe ff ff 90 66 66 66 66 90 55 48 8b 87 00 04 00 00 48 89 e5 <48> 8b
40 d8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90
RIP [<ffffffff81099b60>] kthread_data+0x10/0x20
RSP <ffff88005b97b980>
CR2: ffffffffffffffd8
---[ end trace 001cc830ec804da8 ]---
Fixing recursive fault but reboot is needed!
Current details:
$ btrfs fi show
Label: 'BTRFS' uuid: 41cda023-1c96-4174-98ba-f29a3d38cd85
Total devices 5 FS bytes used 4.81TiB
devid 1 size 2.73TiB used 1.66TiB path /dev/xvdc
devid 2 size 2.73TiB used 1.67TiB path /dev/xvdd
devid 3 size 1.82TiB used 1.82TiB path /dev/xvde
devid 5 size 1.82TiB used 1.82TiB path /dev/xvdg
*** Some devices missing
$ btrfs fi df /mnt/fileshare
Data, RAID6: total=5.14TiB, used=4.81TiB
System, RAID6: total=160.00MiB, used=608.00KiB
Metadata, RAID6: total=6.19GiB, used=5.19GiB
GlobalReserve, single: total=512.00MiB, used=0.00B
[ 12.833431] Btrfs loaded
[ 12.834339] BTRFS: device label BTRFS devid 1 transid 46614 /dev/xvdc
[ 12.861109] BTRFS: device label BTRFS devid 0 transid 46614 /dev/xvdf
[ 12.861357] BTRFS: device label BTRFS devid 3 transid 46614 /dev/xvde
[ 12.862859] BTRFS: device label BTRFS devid 2 transid 46614 /dev/xvdd
[ 12.863372] BTRFS: device label BTRFS devid 5 transid 46614 /dev/xvdg
[ 379.629911] BTRFS info (device xvdg): allowing degraded mounts
[ 379.630028] BTRFS info (device xvdg): not using ssd allocation scheme
[ 379.630120] BTRFS info (device xvdg): disk space caching is enabled
[ 379.630207] BTRFS: has skinny extents
[ 379.631024] BTRFS warning (device xvdg): devid 4 uuid
61ccce61-9787-453e-b793-1b86f8015ee1 is missing
[ 383.675967] BTRFS info (device xvdg): continuing dev_replace from
<missing disk> (devid 4) to /dev/xvdf @0%
I've currently cancelled the replace with a btrfs replace cancel
/mnt/fileshare - so at least the system doesn't crash completely in the
meantime - and mounted it with -o degraded until I can see what the deal
is here.
Any suggestions?
--
Steven Haigh
Email: netwiz@crc.id.au
Web: https://www.crc.id.au
Phone: (03) 9001 6090 - 0412 935 897
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: system crash on replace 2016-06-23 17:44 system crash on replace Steven Haigh @ 2016-06-23 18:35 ` Austin S. Hemmelgarn 2016-06-23 18:55 ` Steven Haigh 0 siblings, 1 reply; 5+ messages in thread From: Austin S. Hemmelgarn @ 2016-06-23 18:35 UTC (permalink / raw) To: Steven Haigh, linux-btrfs On 2016-06-23 13:44, Steven Haigh wrote: > Hi all, > > Relative newbie to BTRFS, but long time linux user. I pass the full > disks from a Xen Dom0 -> guest DomU and run BTRFS within the DomU. > > I've migrated my existing mdadm RAID6 to a BTRFS raid6 layout. I have a > drive that threw a few UNC errors during a subsequent balance, so I've > pulled that drive, dd /dev/zero to it, then trying to add it back in to > the BTRFS system via: > btrfs replace start 4 /dev/xvdf /mnt/fileshare > > The command gets accepted and the replace starts - however apart from it > being at a glacial pace, it seems to hang the system hard with the > following output: > > zeus login: BTRFS info (device xvdc): not using ssd allocation scheme > BTRFS info (device xvdc): disk space caching is enabled > BUG: unable to handle kernel paging request at ffffc90040eed000 > IP: [<ffffffff81332292>] __memcpy+0x12/0x20 > PGD 7fbc6067 PUD 7ce9e067 PMD 7b6d6067 PTE 0 > Oops: 0002 [#1] SMP > Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs > aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper cryptd > pcspkr raid6_pq nfsd auth > _rpcgss nfs_acl lockd grace sunrpc ip_tables xen_netfront crc32c_intel > xen_gntalloc xen_evtchn ipv6 autofs4 > CPU: 1 PID: 2271 Comm: kworker/u4:4 Not tainted 4.4.13-1.el7xen.x86_64 #1 > Workqueue: btrfs-endio btrfs_endio_helper [btrfs] > task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: ffff88005b978000 > RIP: e030:[<ffffffff81332292>] [<ffffffff81332292>] __memcpy+0x12/0x20 > RSP: e02b:ffff88005b97bc60 EFLAGS: 00010246 > RAX: ffffc90040eecff8 RBX: 0000000000001000 RCX: 00000000000001ff > RDX: 0000000000000000 RSI: ffff88004e4ec008 RDI: ffffc90040eed000 > RBP: ffff88005b97bd28 R08: ffffc90040eeb000 R09: 00000000607a06e1 > R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000000000 > R13: 00000000607a26d9 R14: 00000000607a26e1 R15: ffff880062c613d8 > FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) knlGS:0000000000000000 > CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: ffffc90040eed000 CR3: 0000000056004000 CR4: 0000000000042660 > Stack: > ffffffffa05afc77 ffff88005b97bc90 ffffffff81190a14 0000160000000000 > ffff88005ba01900 0000000000000000 00000000607a06e1 ffffc90040eeb000 > 0000000000000002 000000000000001b 0000000000000000 0000002000000001 > Call Trace: > [<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs] > [<ffffffff81190a14>] ? vmalloc+0x54/0x60 > [<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs] > [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 > [<ffffffff812f40c0>] bio_endio+0x40/0x60 > [<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs] > [<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs] > [<ffffffff810a1352>] ? finish_task_switch+0x82/0x280 > [<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs] > [<ffffffff81093844>] process_one_work+0x154/0x400 > [<ffffffff8109438a>] worker_thread+0x11a/0x460 > [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 > [<ffffffff810993f9>] kthread+0xc9/0xe0 > [<ffffffff81099330>] ? kthread_park+0x60/0x60 > [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 > [<ffffffff81099330>] ? kthread_park+0x60/0x60 > Code: 74 0e 48 8b 43 60 48 2b 43 50 88 43 4e 5b 5d c3 e8 b4 fc ff ff eb > eb 90 90 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 > a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 > RIP [<ffffffff81332292>] __memcpy+0x12/0x20 > RSP <ffff88005b97bc60> > CR2: ffffc90040eed000 > ---[ end trace 001cc830ec804da7 ]--- > BUG: unable to handle kernel paging request at ffffffffffffffd8 > IP: [<ffffffff81099b60>] kthread_data+0x10/0x20 > PGD 188d067 PUD 188f067 PMD 0 > Oops: 0000 [#2] SMP > Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs > aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper cryptd > pcspkr raid6_pq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables > xen_netfront crc32c_intel xen_gntalloc xen_evtchn ipv6 autofs4 > CPU: 1 PID: 2271 Comm: kworker/u4:4 Tainted: G D > 4.4.13-1.el7xen.x86_64 #1 > task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: ffff88005b978000 > RIP: e030:[<ffffffff81099b60>] [<ffffffff81099b60>] kthread_data+0x10/0x20 > RSP: e02b:ffff88005b97b980 EFLAGS: 00010002 > RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 > RDX: ffffffff81bd5080 RSI: 0000000000000001 RDI: ffff88007c5c83c0 > RBP: ffff88005b97b980 R08: 0000000000000001 R09: 000013f6a632677e > R10: 000000000000001f R11: 0000000000000000 R12: ffff88007c5c83c0 > R13: 0000000000000000 R14: 00000000000163c0 R15: 0000000000000001 > FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) knlGS:0000000000000000 > CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000000000028 CR3: 0000000056004000 CR4: 0000000000042660 > Stack: > ffff88005b97b998 ffffffff81094751 ffff88007f5163c0 ffff88005b97b9e0 > ffffffff8165a34f ffff88007b678448 ffff88007c5c83c0 ffff88005b97c000 > ffff88007c5c8710 0000000000000000 ffff88007c5c83c0 ffff88007cffacc0 > Call Trace: > [<ffffffff81094751>] wq_worker_sleeping+0x11/0x90 > [<ffffffff8165a34f>] __schedule+0x3bf/0x880 > [<ffffffff8165a845>] schedule+0x35/0x80 > [<ffffffff8107fc3f>] do_exit+0x65f/0xad0 > [<ffffffff8101a5ea>] oops_end+0x9a/0xd0 > [<ffffffff8105f7ad>] no_context+0x10d/0x360 > [<ffffffff8105fb09>] __bad_area_nosemaphore+0x109/0x210 > [<ffffffff8105fc23>] bad_area_nosemaphore+0x13/0x20 > [<ffffffff81060200>] __do_page_fault+0x80/0x3f0 > [<ffffffff8118e3a4>] ? vmap_page_range_noflush+0x284/0x390 > [<ffffffff81060592>] do_page_fault+0x22/0x30 > [<ffffffff8165fea8>] page_fault+0x28/0x30 > [<ffffffff81332292>] ? __memcpy+0x12/0x20 > [<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs] > [<ffffffff81190a14>] ? vmalloc+0x54/0x60 > [<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs] > [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 > [<ffffffff812f40c0>] bio_endio+0x40/0x60 > [<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs] > [<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs] > [<ffffffff810a1352>] ? finish_task_switch+0x82/0x280 > [<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs] > [<ffffffff81093844>] process_one_work+0x154/0x400 > [<ffffffff8109438a>] worker_thread+0x11a/0x460 > [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 > [<ffffffff810993f9>] kthread+0xc9/0xe0 > [<ffffffff81099330>] ? kthread_park+0x60/0x60 > [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 > [<ffffffff81099330>] ? kthread_park+0x60/0x60 > Code: ff ff eb 92 be 3a 02 00 00 48 c7 c7 de 81 7a 81 e8 d6 34 fe ff e9 > d5 fe ff ff 90 66 66 66 66 90 55 48 8b 87 00 04 00 00 48 89 e5 <48> 8b > 40 d8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 > RIP [<ffffffff81099b60>] kthread_data+0x10/0x20 > RSP <ffff88005b97b980> > CR2: ffffffffffffffd8 > ---[ end trace 001cc830ec804da8 ]--- > Fixing recursive fault but reboot is needed! > > Current details: > $ btrfs fi show > Label: 'BTRFS' uuid: 41cda023-1c96-4174-98ba-f29a3d38cd85 > Total devices 5 FS bytes used 4.81TiB > devid 1 size 2.73TiB used 1.66TiB path /dev/xvdc > devid 2 size 2.73TiB used 1.67TiB path /dev/xvdd > devid 3 size 1.82TiB used 1.82TiB path /dev/xvde > devid 5 size 1.82TiB used 1.82TiB path /dev/xvdg > *** Some devices missing > > $ btrfs fi df /mnt/fileshare > Data, RAID6: total=5.14TiB, used=4.81TiB > System, RAID6: total=160.00MiB, used=608.00KiB > Metadata, RAID6: total=6.19GiB, used=5.19GiB > GlobalReserve, single: total=512.00MiB, used=0.00B > > [ 12.833431] Btrfs loaded > [ 12.834339] BTRFS: device label BTRFS devid 1 transid 46614 /dev/xvdc > [ 12.861109] BTRFS: device label BTRFS devid 0 transid 46614 /dev/xvdf > [ 12.861357] BTRFS: device label BTRFS devid 3 transid 46614 /dev/xvde > [ 12.862859] BTRFS: device label BTRFS devid 2 transid 46614 /dev/xvdd > [ 12.863372] BTRFS: device label BTRFS devid 5 transid 46614 /dev/xvdg > [ 379.629911] BTRFS info (device xvdg): allowing degraded mounts > [ 379.630028] BTRFS info (device xvdg): not using ssd allocation scheme > [ 379.630120] BTRFS info (device xvdg): disk space caching is enabled > [ 379.630207] BTRFS: has skinny extents > [ 379.631024] BTRFS warning (device xvdg): devid 4 uuid > 61ccce61-9787-453e-b793-1b86f8015ee1 is missing > [ 383.675967] BTRFS info (device xvdg): continuing dev_replace from > <missing disk> (devid 4) to /dev/xvdf @0% > > I've currently cancelled the replace with a btrfs replace cancel > /mnt/fileshare - so at least the system doesn't crash completely in the > meantime - and mounted it with -o degraded until I can see what the deal > is here. > > Any suggestions? > The first thing I would suggest is to follow the suggestion at the bottom of the back-trace you got, and reboot your system. If you've hit a recursive page fault, then something is going seriously wrong, and you really can't trust the state of the system afterwards. Now, with that out of the way, I think you've actually hit two bugs. The first is a known issue with a currently unknown cause in the BTRFS raid6 code which causes rebuilds to take extremely long amounts of time (the only time I've seen this happen myself it took 8 hours to rebuild a FS with only a few hundred GB of data on it, when the same operation with a raid1 profile took only about 20 minutes). The second appears to be a previously unreported (at least, I've never seen anything like this reported) issue in the in-line compression code. You may be able to work around the second bug short term by turning off compression in the mount options, but I'm not 100% certain if this will help. Expanding further on this all though, after rebooting, see if you get the same BUG output after rebooting the system (before turning off compression in the mount options). If it doesn't happen again, then I'd seriously suggest checking your hardware, as certain types of RAM and/or CPU issues can trigger things like this, and while this particular symptom only shows up intermittently, the primary symptom is data corruption in RAM. As far as the raid6 rebuild issue, there's currently not any known method to fix it, let alone any known way to reliably reproduce it (multiple people have reported it, but I don't know of anyone who has been able to reliably reproduce it starting with a new filesystem). Given this and the couple of other known issues in the raid5/6 code (one being a slightly different form of the traditional 'write hole', and the other being an issue with scrub parsing device stats), general advice here is to avoid using raid5/6 for production systems for the time being. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: system crash on replace 2016-06-23 18:35 ` Austin S. Hemmelgarn @ 2016-06-23 18:55 ` Steven Haigh 2016-06-23 19:13 ` Scott Talbert 0 siblings, 1 reply; 5+ messages in thread From: Steven Haigh @ 2016-06-23 18:55 UTC (permalink / raw) To: linux-btrfs [-- Attachment #1.1: Type: text/plain, Size: 13415 bytes --] On 24/06/16 04:35, Austin S. Hemmelgarn wrote: > On 2016-06-23 13:44, Steven Haigh wrote: >> Hi all, >> >> Relative newbie to BTRFS, but long time linux user. I pass the full >> disks from a Xen Dom0 -> guest DomU and run BTRFS within the DomU. >> >> I've migrated my existing mdadm RAID6 to a BTRFS raid6 layout. I have a >> drive that threw a few UNC errors during a subsequent balance, so I've >> pulled that drive, dd /dev/zero to it, then trying to add it back in to >> the BTRFS system via: >> btrfs replace start 4 /dev/xvdf /mnt/fileshare >> >> The command gets accepted and the replace starts - however apart from it >> being at a glacial pace, it seems to hang the system hard with the >> following output: >> >> zeus login: BTRFS info (device xvdc): not using ssd allocation scheme >> BTRFS info (device xvdc): disk space caching is enabled >> BUG: unable to handle kernel paging request at ffffc90040eed000 >> IP: [<ffffffff81332292>] __memcpy+0x12/0x20 >> PGD 7fbc6067 PUD 7ce9e067 PMD 7b6d6067 PTE 0 >> Oops: 0002 [#1] SMP >> Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs >> aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper cryptd >> pcspkr raid6_pq nfsd auth >> _rpcgss nfs_acl lockd grace sunrpc ip_tables xen_netfront crc32c_intel >> xen_gntalloc xen_evtchn ipv6 autofs4 >> CPU: 1 PID: 2271 Comm: kworker/u4:4 Not tainted 4.4.13-1.el7xen.x86_64 #1 >> Workqueue: btrfs-endio btrfs_endio_helper [btrfs] >> task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: ffff88005b978000 >> RIP: e030:[<ffffffff81332292>] [<ffffffff81332292>] __memcpy+0x12/0x20 >> RSP: e02b:ffff88005b97bc60 EFLAGS: 00010246 >> RAX: ffffc90040eecff8 RBX: 0000000000001000 RCX: 00000000000001ff >> RDX: 0000000000000000 RSI: ffff88004e4ec008 RDI: ffffc90040eed000 >> RBP: ffff88005b97bd28 R08: ffffc90040eeb000 R09: 00000000607a06e1 >> R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000000000 >> R13: 00000000607a26d9 R14: 00000000607a26e1 R15: ffff880062c613d8 >> FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) >> knlGS:0000000000000000 >> CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 >> CR2: ffffc90040eed000 CR3: 0000000056004000 CR4: 0000000000042660 >> Stack: >> ffffffffa05afc77 ffff88005b97bc90 ffffffff81190a14 0000160000000000 >> ffff88005ba01900 0000000000000000 00000000607a06e1 ffffc90040eeb000 >> 0000000000000002 000000000000001b 0000000000000000 0000002000000001 >> Call Trace: >> [<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs] >> [<ffffffff81190a14>] ? vmalloc+0x54/0x60 >> [<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs] >> [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 >> [<ffffffff812f40c0>] bio_endio+0x40/0x60 >> [<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs] >> [<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs] >> [<ffffffff810a1352>] ? finish_task_switch+0x82/0x280 >> [<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs] >> [<ffffffff81093844>] process_one_work+0x154/0x400 >> [<ffffffff8109438a>] worker_thread+0x11a/0x460 >> [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 >> [<ffffffff810993f9>] kthread+0xc9/0xe0 >> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >> [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 >> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >> Code: 74 0e 48 8b 43 60 48 2b 43 50 88 43 4e 5b 5d c3 e8 b4 fc ff ff eb >> eb 90 90 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 >> a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 >> RIP [<ffffffff81332292>] __memcpy+0x12/0x20 >> RSP <ffff88005b97bc60> >> CR2: ffffc90040eed000 >> ---[ end trace 001cc830ec804da7 ]--- >> BUG: unable to handle kernel paging request at ffffffffffffffd8 >> IP: [<ffffffff81099b60>] kthread_data+0x10/0x20 >> PGD 188d067 PUD 188f067 PMD 0 >> Oops: 0000 [#2] SMP >> Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs >> aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper cryptd >> pcspkr raid6_pq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables >> xen_netfront crc32c_intel xen_gntalloc xen_evtchn ipv6 autofs4 >> CPU: 1 PID: 2271 Comm: kworker/u4:4 Tainted: G D >> 4.4.13-1.el7xen.x86_64 #1 >> task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: ffff88005b978000 >> RIP: e030:[<ffffffff81099b60>] [<ffffffff81099b60>] >> kthread_data+0x10/0x20 >> RSP: e02b:ffff88005b97b980 EFLAGS: 00010002 >> RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 >> RDX: ffffffff81bd5080 RSI: 0000000000000001 RDI: ffff88007c5c83c0 >> RBP: ffff88005b97b980 R08: 0000000000000001 R09: 000013f6a632677e >> R10: 000000000000001f R11: 0000000000000000 R12: ffff88007c5c83c0 >> R13: 0000000000000000 R14: 00000000000163c0 R15: 0000000000000001 >> FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) >> knlGS:0000000000000000 >> CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 >> CR2: 0000000000000028 CR3: 0000000056004000 CR4: 0000000000042660 >> Stack: >> ffff88005b97b998 ffffffff81094751 ffff88007f5163c0 ffff88005b97b9e0 >> ffffffff8165a34f ffff88007b678448 ffff88007c5c83c0 ffff88005b97c000 >> ffff88007c5c8710 0000000000000000 ffff88007c5c83c0 ffff88007cffacc0 >> Call Trace: >> [<ffffffff81094751>] wq_worker_sleeping+0x11/0x90 >> [<ffffffff8165a34f>] __schedule+0x3bf/0x880 >> [<ffffffff8165a845>] schedule+0x35/0x80 >> [<ffffffff8107fc3f>] do_exit+0x65f/0xad0 >> [<ffffffff8101a5ea>] oops_end+0x9a/0xd0 >> [<ffffffff8105f7ad>] no_context+0x10d/0x360 >> [<ffffffff8105fb09>] __bad_area_nosemaphore+0x109/0x210 >> [<ffffffff8105fc23>] bad_area_nosemaphore+0x13/0x20 >> [<ffffffff81060200>] __do_page_fault+0x80/0x3f0 >> [<ffffffff8118e3a4>] ? vmap_page_range_noflush+0x284/0x390 >> [<ffffffff81060592>] do_page_fault+0x22/0x30 >> [<ffffffff8165fea8>] page_fault+0x28/0x30 >> [<ffffffff81332292>] ? __memcpy+0x12/0x20 >> [<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs] >> [<ffffffff81190a14>] ? vmalloc+0x54/0x60 >> [<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs] >> [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 >> [<ffffffff812f40c0>] bio_endio+0x40/0x60 >> [<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs] >> [<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs] >> [<ffffffff810a1352>] ? finish_task_switch+0x82/0x280 >> [<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs] >> [<ffffffff81093844>] process_one_work+0x154/0x400 >> [<ffffffff8109438a>] worker_thread+0x11a/0x460 >> [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 >> [<ffffffff810993f9>] kthread+0xc9/0xe0 >> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >> [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 >> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >> Code: ff ff eb 92 be 3a 02 00 00 48 c7 c7 de 81 7a 81 e8 d6 34 fe ff e9 >> d5 fe ff ff 90 66 66 66 66 90 55 48 8b 87 00 04 00 00 48 89 e5 <48> 8b >> 40 d8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 >> RIP [<ffffffff81099b60>] kthread_data+0x10/0x20 >> RSP <ffff88005b97b980> >> CR2: ffffffffffffffd8 >> ---[ end trace 001cc830ec804da8 ]--- >> Fixing recursive fault but reboot is needed! >> >> Current details: >> $ btrfs fi show >> Label: 'BTRFS' uuid: 41cda023-1c96-4174-98ba-f29a3d38cd85 >> Total devices 5 FS bytes used 4.81TiB >> devid 1 size 2.73TiB used 1.66TiB path /dev/xvdc >> devid 2 size 2.73TiB used 1.67TiB path /dev/xvdd >> devid 3 size 1.82TiB used 1.82TiB path /dev/xvde >> devid 5 size 1.82TiB used 1.82TiB path /dev/xvdg >> *** Some devices missing >> >> $ btrfs fi df /mnt/fileshare >> Data, RAID6: total=5.14TiB, used=4.81TiB >> System, RAID6: total=160.00MiB, used=608.00KiB >> Metadata, RAID6: total=6.19GiB, used=5.19GiB >> GlobalReserve, single: total=512.00MiB, used=0.00B >> >> [ 12.833431] Btrfs loaded >> [ 12.834339] BTRFS: device label BTRFS devid 1 transid 46614 /dev/xvdc >> [ 12.861109] BTRFS: device label BTRFS devid 0 transid 46614 /dev/xvdf >> [ 12.861357] BTRFS: device label BTRFS devid 3 transid 46614 /dev/xvde >> [ 12.862859] BTRFS: device label BTRFS devid 2 transid 46614 /dev/xvdd >> [ 12.863372] BTRFS: device label BTRFS devid 5 transid 46614 /dev/xvdg >> [ 379.629911] BTRFS info (device xvdg): allowing degraded mounts >> [ 379.630028] BTRFS info (device xvdg): not using ssd allocation scheme >> [ 379.630120] BTRFS info (device xvdg): disk space caching is enabled >> [ 379.630207] BTRFS: has skinny extents >> [ 379.631024] BTRFS warning (device xvdg): devid 4 uuid >> 61ccce61-9787-453e-b793-1b86f8015ee1 is missing >> [ 383.675967] BTRFS info (device xvdg): continuing dev_replace from >> <missing disk> (devid 4) to /dev/xvdf @0% >> >> I've currently cancelled the replace with a btrfs replace cancel >> /mnt/fileshare - so at least the system doesn't crash completely in the >> meantime - and mounted it with -o degraded until I can see what the deal >> is here. >> >> Any suggestions? >> > The first thing I would suggest is to follow the suggestion at the > bottom of the back-trace you got, and reboot your system. If you've hit > a recursive page fault, then something is going seriously wrong, and you > really can't trust the state of the system afterwards. It doesn't give me a choice here - the entire VM becomes unresponsive :) > Now, with that out of the way, I think you've actually hit two bugs. The > first is a known issue with a currently unknown cause in the BTRFS raid6 > code which causes rebuilds to take extremely long amounts of time (the > only time I've seen this happen myself it took 8 hours to rebuild a FS > with only a few hundred GB of data on it, when the same operation with a > raid1 profile took only about 20 minutes). The second appears to be a > previously unreported (at least, I've never seen anything like this > reported) issue in the in-line compression code. You may be able to > work around the second bug short term by turning off compression in the > mount options, but I'm not 100% certain if this will help. > > Expanding further on this all though, after rebooting, see if you get > the same BUG output after rebooting the system (before turning off > compression in the mount options). If it doesn't happen again, then I'd > seriously suggest checking your hardware, as certain types of RAM and/or > CPU issues can trigger things like this, and while this particular > symptom only shows up intermittently, the primary symptom is data > corruption in RAM. What seems to happen is that the system will boot again, I mount the filesystem, it says "Cool! I was doing a replace. I should resume it" and then promptly die with a similar crash again. > As far as the raid6 rebuild issue, there's currently not any known > method to fix it, let alone any known way to reliably reproduce it > (multiple people have reported it, but I don't know of anyone who has > been able to reliably reproduce it starting with a new filesystem). > Given this and the couple of other known issues in the raid5/6 code (one > being a slightly different form of the traditional 'write hole', and the > other being an issue with scrub parsing device stats), general advice > here is to avoid using raid5/6 for production systems for the time being. Right now, I've cancelled the replace via 'btrfs replace cancel', which freed up the device. I this did: $ btrfs device add /dev/xvdf /mnt/fileshare $ btrfs device delete missing /mnt/fileshare This seems to be rebalancing the data from all drives (and I assume recalculating anything that is missing) onto the 'new' target. ie: $ btrfs fi show /mnt/fileshare/ Label: 'BTRFS' uuid: 41cda023-1c96-4174-98ba-f29a3d38cd85 Total devices 6 FS bytes used 4.81TiB devid 1 size 2.73TiB used 1.66TiB path /dev/xvdc devid 2 size 2.73TiB used 1.67TiB path /dev/xvdd devid 3 size 1.82TiB used 1.82TiB path /dev/xvde devid 5 size 1.82TiB used 1.82TiB path /dev/xvdg devid 6 size 1.82TiB used 27.97GiB path /dev/xvdf *** Some devices missing The theory being that eventually what was known as devid 4 will have no data and we practically get the same end result as the replace - but via a different method. Interestingly, this method is travelling along *MUCH* faster than the replace (ignoring the crashes!) - but will still take a while (as expected). An iostat -m 5 shows me this as an update: avg-cpu: %user %nice %system %iowait %steal %idle 0.00 0.00 9.56 74.51 0.62 15.31 Device: tps MB_read/s MB_wrtn/s MB_read MB_wrtn xvda 0.00 0.00 0.00 0 0 xvdc 417.60 20.20 17.32 101 86 xvdd 416.60 20.20 17.32 101 86 xvde 415.80 20.12 17.78 100 88 xvdf 147.00 0.00 17.32 0 86 xvdg 413.00 20.13 17.35 100 86 -- Steven Haigh Email: netwiz@crc.id.au Web: https://www.crc.id.au Phone: (03) 9001 6090 - 0412 935 897 [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: system crash on replace 2016-06-23 18:55 ` Steven Haigh @ 2016-06-23 19:13 ` Scott Talbert 2016-06-24 1:12 ` Steven Haigh 0 siblings, 1 reply; 5+ messages in thread From: Scott Talbert @ 2016-06-23 19:13 UTC (permalink / raw) To: Steven Haigh; +Cc: linux-btrfs On Thu, 23 Jun 2016, Steven Haigh wrote: > On 24/06/16 04:35, Austin S. Hemmelgarn wrote: >> On 2016-06-23 13:44, Steven Haigh wrote: >>> Hi all, >>> >>> Relative newbie to BTRFS, but long time linux user. I pass the full >>> disks from a Xen Dom0 -> guest DomU and run BTRFS within the DomU. >>> >>> I've migrated my existing mdadm RAID6 to a BTRFS raid6 layout. I have a >>> drive that threw a few UNC errors during a subsequent balance, so I've >>> pulled that drive, dd /dev/zero to it, then trying to add it back in to >>> the BTRFS system via: >>> btrfs replace start 4 /dev/xvdf /mnt/fileshare >>> >>> The command gets accepted and the replace starts - however apart from it >>> being at a glacial pace, it seems to hang the system hard with the >>> following output: >>> >>> zeus login: BTRFS info (device xvdc): not using ssd allocation scheme >>> BTRFS info (device xvdc): disk space caching is enabled >>> BUG: unable to handle kernel paging request at ffffc90040eed000 >>> IP: [<ffffffff81332292>] __memcpy+0x12/0x20 >>> PGD 7fbc6067 PUD 7ce9e067 PMD 7b6d6067 PTE 0 >>> Oops: 0002 [#1] SMP >>> Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs >>> aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper cryptd >>> pcspkr raid6_pq nfsd auth >>> _rpcgss nfs_acl lockd grace sunrpc ip_tables xen_netfront crc32c_intel >>> xen_gntalloc xen_evtchn ipv6 autofs4 >>> CPU: 1 PID: 2271 Comm: kworker/u4:4 Not tainted 4.4.13-1.el7xen.x86_64 #1 >>> Workqueue: btrfs-endio btrfs_endio_helper [btrfs] >>> task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: ffff88005b978000 >>> RIP: e030:[<ffffffff81332292>] [<ffffffff81332292>] __memcpy+0x12/0x20 >>> RSP: e02b:ffff88005b97bc60 EFLAGS: 00010246 >>> RAX: ffffc90040eecff8 RBX: 0000000000001000 RCX: 00000000000001ff >>> RDX: 0000000000000000 RSI: ffff88004e4ec008 RDI: ffffc90040eed000 >>> RBP: ffff88005b97bd28 R08: ffffc90040eeb000 R09: 00000000607a06e1 >>> R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000000000 >>> R13: 00000000607a26d9 R14: 00000000607a26e1 R15: ffff880062c613d8 >>> FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) >>> knlGS:0000000000000000 >>> CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 >>> CR2: ffffc90040eed000 CR3: 0000000056004000 CR4: 0000000000042660 >>> Stack: >>> ffffffffa05afc77 ffff88005b97bc90 ffffffff81190a14 0000160000000000 >>> ffff88005ba01900 0000000000000000 00000000607a06e1 ffffc90040eeb000 >>> 0000000000000002 000000000000001b 0000000000000000 0000002000000001 >>> Call Trace: >>> [<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs] >>> [<ffffffff81190a14>] ? vmalloc+0x54/0x60 >>> [<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs] >>> [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 >>> [<ffffffff812f40c0>] bio_endio+0x40/0x60 >>> [<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs] >>> [<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs] >>> [<ffffffff810a1352>] ? finish_task_switch+0x82/0x280 >>> [<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs] >>> [<ffffffff81093844>] process_one_work+0x154/0x400 >>> [<ffffffff8109438a>] worker_thread+0x11a/0x460 >>> [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 >>> [<ffffffff810993f9>] kthread+0xc9/0xe0 >>> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >>> [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 >>> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >>> Code: 74 0e 48 8b 43 60 48 2b 43 50 88 43 4e 5b 5d c3 e8 b4 fc ff ff eb >>> eb 90 90 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 >>> a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 >>> RIP [<ffffffff81332292>] __memcpy+0x12/0x20 >>> RSP <ffff88005b97bc60> >>> CR2: ffffc90040eed000 >>> ---[ end trace 001cc830ec804da7 ]--- >>> BUG: unable to handle kernel paging request at ffffffffffffffd8 >>> IP: [<ffffffff81099b60>] kthread_data+0x10/0x20 >>> PGD 188d067 PUD 188f067 PMD 0 >>> Oops: 0000 [#2] SMP >>> Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs >>> aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper cryptd >>> pcspkr raid6_pq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables >>> xen_netfront crc32c_intel xen_gntalloc xen_evtchn ipv6 autofs4 >>> CPU: 1 PID: 2271 Comm: kworker/u4:4 Tainted: G D >>> 4.4.13-1.el7xen.x86_64 #1 >>> task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: ffff88005b978000 >>> RIP: e030:[<ffffffff81099b60>] [<ffffffff81099b60>] >>> kthread_data+0x10/0x20 >>> RSP: e02b:ffff88005b97b980 EFLAGS: 00010002 >>> RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 >>> RDX: ffffffff81bd5080 RSI: 0000000000000001 RDI: ffff88007c5c83c0 >>> RBP: ffff88005b97b980 R08: 0000000000000001 R09: 000013f6a632677e >>> R10: 000000000000001f R11: 0000000000000000 R12: ffff88007c5c83c0 >>> R13: 0000000000000000 R14: 00000000000163c0 R15: 0000000000000001 >>> FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) >>> knlGS:0000000000000000 >>> CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 >>> CR2: 0000000000000028 CR3: 0000000056004000 CR4: 0000000000042660 >>> Stack: >>> ffff88005b97b998 ffffffff81094751 ffff88007f5163c0 ffff88005b97b9e0 >>> ffffffff8165a34f ffff88007b678448 ffff88007c5c83c0 ffff88005b97c000 >>> ffff88007c5c8710 0000000000000000 ffff88007c5c83c0 ffff88007cffacc0 >>> Call Trace: >>> [<ffffffff81094751>] wq_worker_sleeping+0x11/0x90 >>> [<ffffffff8165a34f>] __schedule+0x3bf/0x880 >>> [<ffffffff8165a845>] schedule+0x35/0x80 >>> [<ffffffff8107fc3f>] do_exit+0x65f/0xad0 >>> [<ffffffff8101a5ea>] oops_end+0x9a/0xd0 >>> [<ffffffff8105f7ad>] no_context+0x10d/0x360 >>> [<ffffffff8105fb09>] __bad_area_nosemaphore+0x109/0x210 >>> [<ffffffff8105fc23>] bad_area_nosemaphore+0x13/0x20 >>> [<ffffffff81060200>] __do_page_fault+0x80/0x3f0 >>> [<ffffffff8118e3a4>] ? vmap_page_range_noflush+0x284/0x390 >>> [<ffffffff81060592>] do_page_fault+0x22/0x30 >>> [<ffffffff8165fea8>] page_fault+0x28/0x30 >>> [<ffffffff81332292>] ? __memcpy+0x12/0x20 >>> [<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs] >>> [<ffffffff81190a14>] ? vmalloc+0x54/0x60 >>> [<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs] >>> [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 >>> [<ffffffff812f40c0>] bio_endio+0x40/0x60 >>> [<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs] >>> [<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs] >>> [<ffffffff810a1352>] ? finish_task_switch+0x82/0x280 >>> [<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs] >>> [<ffffffff81093844>] process_one_work+0x154/0x400 >>> [<ffffffff8109438a>] worker_thread+0x11a/0x460 >>> [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 >>> [<ffffffff810993f9>] kthread+0xc9/0xe0 >>> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >>> [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 >>> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >>> Code: ff ff eb 92 be 3a 02 00 00 48 c7 c7 de 81 7a 81 e8 d6 34 fe ff e9 >>> d5 fe ff ff 90 66 66 66 66 90 55 48 8b 87 00 04 00 00 48 89 e5 <48> 8b >>> 40 d8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 >>> RIP [<ffffffff81099b60>] kthread_data+0x10/0x20 >>> RSP <ffff88005b97b980> >>> CR2: ffffffffffffffd8 >>> ---[ end trace 001cc830ec804da8 ]--- >>> Fixing recursive fault but reboot is needed! >>> >>> Current details: >>> $ btrfs fi show >>> Label: 'BTRFS' uuid: 41cda023-1c96-4174-98ba-f29a3d38cd85 >>> Total devices 5 FS bytes used 4.81TiB >>> devid 1 size 2.73TiB used 1.66TiB path /dev/xvdc >>> devid 2 size 2.73TiB used 1.67TiB path /dev/xvdd >>> devid 3 size 1.82TiB used 1.82TiB path /dev/xvde >>> devid 5 size 1.82TiB used 1.82TiB path /dev/xvdg >>> *** Some devices missing >>> >>> $ btrfs fi df /mnt/fileshare >>> Data, RAID6: total=5.14TiB, used=4.81TiB >>> System, RAID6: total=160.00MiB, used=608.00KiB >>> Metadata, RAID6: total=6.19GiB, used=5.19GiB >>> GlobalReserve, single: total=512.00MiB, used=0.00B >>> >>> [ 12.833431] Btrfs loaded >>> [ 12.834339] BTRFS: device label BTRFS devid 1 transid 46614 /dev/xvdc >>> [ 12.861109] BTRFS: device label BTRFS devid 0 transid 46614 /dev/xvdf >>> [ 12.861357] BTRFS: device label BTRFS devid 3 transid 46614 /dev/xvde >>> [ 12.862859] BTRFS: device label BTRFS devid 2 transid 46614 /dev/xvdd >>> [ 12.863372] BTRFS: device label BTRFS devid 5 transid 46614 /dev/xvdg >>> [ 379.629911] BTRFS info (device xvdg): allowing degraded mounts >>> [ 379.630028] BTRFS info (device xvdg): not using ssd allocation scheme >>> [ 379.630120] BTRFS info (device xvdg): disk space caching is enabled >>> [ 379.630207] BTRFS: has skinny extents >>> [ 379.631024] BTRFS warning (device xvdg): devid 4 uuid >>> 61ccce61-9787-453e-b793-1b86f8015ee1 is missing >>> [ 383.675967] BTRFS info (device xvdg): continuing dev_replace from >>> <missing disk> (devid 4) to /dev/xvdf @0% >>> >>> I've currently cancelled the replace with a btrfs replace cancel >>> /mnt/fileshare - so at least the system doesn't crash completely in the >>> meantime - and mounted it with -o degraded until I can see what the deal >>> is here. >>> >>> Any suggestions? >>> >> The first thing I would suggest is to follow the suggestion at the >> bottom of the back-trace you got, and reboot your system. If you've hit >> a recursive page fault, then something is going seriously wrong, and you >> really can't trust the state of the system afterwards. > > It doesn't give me a choice here - the entire VM becomes unresponsive :) > >> Now, with that out of the way, I think you've actually hit two bugs. The >> first is a known issue with a currently unknown cause in the BTRFS raid6 >> code which causes rebuilds to take extremely long amounts of time (the >> only time I've seen this happen myself it took 8 hours to rebuild a FS >> with only a few hundred GB of data on it, when the same operation with a >> raid1 profile took only about 20 minutes). The second appears to be a >> previously unreported (at least, I've never seen anything like this >> reported) issue in the in-line compression code. You may be able to >> work around the second bug short term by turning off compression in the >> mount options, but I'm not 100% certain if this will help. >> >> Expanding further on this all though, after rebooting, see if you get >> the same BUG output after rebooting the system (before turning off >> compression in the mount options). If it doesn't happen again, then I'd >> seriously suggest checking your hardware, as certain types of RAM and/or >> CPU issues can trigger things like this, and while this particular >> symptom only shows up intermittently, the primary symptom is data >> corruption in RAM. > > What seems to happen is that the system will boot again, I mount the > filesystem, it says "Cool! I was doing a replace. I should resume it" > and then promptly die with a similar crash again. > >> As far as the raid6 rebuild issue, there's currently not any known >> method to fix it, let alone any known way to reliably reproduce it >> (multiple people have reported it, but I don't know of anyone who has >> been able to reliably reproduce it starting with a new filesystem). >> Given this and the couple of other known issues in the raid5/6 code (one >> being a slightly different form of the traditional 'write hole', and the >> other being an issue with scrub parsing device stats), general advice >> here is to avoid using raid5/6 for production systems for the time being. > > Right now, I've cancelled the replace via 'btrfs replace cancel', which > freed up the device. I this did: > $ btrfs device add /dev/xvdf /mnt/fileshare > $ btrfs device delete missing /mnt/fileshare > > This seems to be rebalancing the data from all drives (and I assume > recalculating anything that is missing) onto the 'new' target. Indeed, device replace seems to be broken with raid5/6, but device add / device delete missing seems to work (and is much faster, as you've noted). Scott ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: system crash on replace 2016-06-23 19:13 ` Scott Talbert @ 2016-06-24 1:12 ` Steven Haigh 0 siblings, 0 replies; 5+ messages in thread From: Steven Haigh @ 2016-06-24 1:12 UTC (permalink / raw) To: linux-btrfs On 2016-06-24 05:13, Scott Talbert wrote: > On Thu, 23 Jun 2016, Steven Haigh wrote: > >> On 24/06/16 04:35, Austin S. Hemmelgarn wrote: >>> On 2016-06-23 13:44, Steven Haigh wrote: >>>> Hi all, >>>> >>>> Relative newbie to BTRFS, but long time linux user. I pass the full >>>> disks from a Xen Dom0 -> guest DomU and run BTRFS within the DomU. >>>> >>>> I've migrated my existing mdadm RAID6 to a BTRFS raid6 layout. I >>>> have a >>>> drive that threw a few UNC errors during a subsequent balance, so >>>> I've >>>> pulled that drive, dd /dev/zero to it, then trying to add it back in >>>> to >>>> the BTRFS system via: >>>> btrfs replace start 4 /dev/xvdf /mnt/fileshare >>>> >>>> The command gets accepted and the replace starts - however apart >>>> from it >>>> being at a glacial pace, it seems to hang the system hard with the >>>> following output: >>>> >>>> zeus login: BTRFS info (device xvdc): not using ssd allocation >>>> scheme >>>> BTRFS info (device xvdc): disk space caching is enabled >>>> BUG: unable to handle kernel paging request at ffffc90040eed000 >>>> IP: [<ffffffff81332292>] __memcpy+0x12/0x20 >>>> PGD 7fbc6067 PUD 7ce9e067 PMD 7b6d6067 PTE 0 >>>> Oops: 0002 [#1] SMP >>>> Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul >>>> btrfs >>>> aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper >>>> cryptd >>>> pcspkr raid6_pq nfsd auth >>>> _rpcgss nfs_acl lockd grace sunrpc ip_tables xen_netfront >>>> crc32c_intel >>>> xen_gntalloc xen_evtchn ipv6 autofs4 >>>> CPU: 1 PID: 2271 Comm: kworker/u4:4 Not tainted >>>> 4.4.13-1.el7xen.x86_64 #1 >>>> Workqueue: btrfs-endio btrfs_endio_helper [btrfs] >>>> task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: >>>> ffff88005b978000 >>>> RIP: e030:[<ffffffff81332292>] [<ffffffff81332292>] >>>> __memcpy+0x12/0x20 >>>> RSP: e02b:ffff88005b97bc60 EFLAGS: 00010246 >>>> RAX: ffffc90040eecff8 RBX: 0000000000001000 RCX: 00000000000001ff >>>> RDX: 0000000000000000 RSI: ffff88004e4ec008 RDI: ffffc90040eed000 >>>> RBP: ffff88005b97bd28 R08: ffffc90040eeb000 R09: 00000000607a06e1 >>>> R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000000000 >>>> R13: 00000000607a26d9 R14: 00000000607a26e1 R15: ffff880062c613d8 >>>> FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) >>>> knlGS:0000000000000000 >>>> CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>> CR2: ffffc90040eed000 CR3: 0000000056004000 CR4: 0000000000042660 >>>> Stack: >>>> ffffffffa05afc77 ffff88005b97bc90 ffffffff81190a14 0000160000000000 >>>> ffff88005ba01900 0000000000000000 00000000607a06e1 ffffc90040eeb000 >>>> 0000000000000002 000000000000001b 0000000000000000 0000002000000001 >>>> Call Trace: >>>> [<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs] >>>> [<ffffffff81190a14>] ? vmalloc+0x54/0x60 >>>> [<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs] >>>> [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 >>>> [<ffffffff812f40c0>] bio_endio+0x40/0x60 >>>> [<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs] >>>> [<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs] >>>> [<ffffffff810a1352>] ? finish_task_switch+0x82/0x280 >>>> [<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs] >>>> [<ffffffff81093844>] process_one_work+0x154/0x400 >>>> [<ffffffff8109438a>] worker_thread+0x11a/0x460 >>>> [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 >>>> [<ffffffff810993f9>] kthread+0xc9/0xe0 >>>> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >>>> [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 >>>> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >>>> Code: 74 0e 48 8b 43 60 48 2b 43 50 88 43 4e 5b 5d c3 e8 b4 fc ff ff >>>> eb >>>> eb 90 90 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> >>>> 48 >>>> a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 >>>> RIP [<ffffffff81332292>] __memcpy+0x12/0x20 >>>> RSP <ffff88005b97bc60> >>>> CR2: ffffc90040eed000 >>>> ---[ end trace 001cc830ec804da7 ]--- >>>> BUG: unable to handle kernel paging request at ffffffffffffffd8 >>>> IP: [<ffffffff81099b60>] kthread_data+0x10/0x20 >>>> PGD 188d067 PUD 188f067 PMD 0 >>>> Oops: 0000 [#2] SMP >>>> Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul >>>> btrfs >>>> aesni_intel aes_x86_64 lrw gf128mul xor glue_helper ablk_helper >>>> cryptd >>>> pcspkr raid6_pq nfsd auth_rpcgss nfs_acl lockd grace sunrpc >>>> ip_tables >>>> xen_netfront crc32c_intel xen_gntalloc xen_evtchn ipv6 autofs4 >>>> CPU: 1 PID: 2271 Comm: kworker/u4:4 Tainted: G D >>>> 4.4.13-1.el7xen.x86_64 #1 >>>> task: ffff88007c5c83c0 ti: ffff88005b978000 task.ti: >>>> ffff88005b978000 >>>> RIP: e030:[<ffffffff81099b60>] [<ffffffff81099b60>] >>>> kthread_data+0x10/0x20 >>>> RSP: e02b:ffff88005b97b980 EFLAGS: 00010002 >>>> RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 >>>> RDX: ffffffff81bd5080 RSI: 0000000000000001 RDI: ffff88007c5c83c0 >>>> RBP: ffff88005b97b980 R08: 0000000000000001 R09: 000013f6a632677e >>>> R10: 000000000000001f R11: 0000000000000000 R12: ffff88007c5c83c0 >>>> R13: 0000000000000000 R14: 00000000000163c0 R15: 0000000000000001 >>>> FS: 00007fd08feb88c0(0000) GS:ffff88007f500000(0000) >>>> knlGS:0000000000000000 >>>> CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>> CR2: 0000000000000028 CR3: 0000000056004000 CR4: 0000000000042660 >>>> Stack: >>>> ffff88005b97b998 ffffffff81094751 ffff88007f5163c0 ffff88005b97b9e0 >>>> ffffffff8165a34f ffff88007b678448 ffff88007c5c83c0 ffff88005b97c000 >>>> ffff88007c5c8710 0000000000000000 ffff88007c5c83c0 ffff88007cffacc0 >>>> Call Trace: >>>> [<ffffffff81094751>] wq_worker_sleeping+0x11/0x90 >>>> [<ffffffff8165a34f>] __schedule+0x3bf/0x880 >>>> [<ffffffff8165a845>] schedule+0x35/0x80 >>>> [<ffffffff8107fc3f>] do_exit+0x65f/0xad0 >>>> [<ffffffff8101a5ea>] oops_end+0x9a/0xd0 >>>> [<ffffffff8105f7ad>] no_context+0x10d/0x360 >>>> [<ffffffff8105fb09>] __bad_area_nosemaphore+0x109/0x210 >>>> [<ffffffff8105fc23>] bad_area_nosemaphore+0x13/0x20 >>>> [<ffffffff81060200>] __do_page_fault+0x80/0x3f0 >>>> [<ffffffff8118e3a4>] ? vmap_page_range_noflush+0x284/0x390 >>>> [<ffffffff81060592>] do_page_fault+0x22/0x30 >>>> [<ffffffff8165fea8>] page_fault+0x28/0x30 >>>> [<ffffffff81332292>] ? __memcpy+0x12/0x20 >>>> [<ffffffffa05afc77>] ? lzo_decompress_biovec+0x237/0x2b0 [btrfs] >>>> [<ffffffff81190a14>] ? vmalloc+0x54/0x60 >>>> [<ffffffffa05b0b24>] end_compressed_bio_read+0x1d4/0x2a0 [btrfs] >>>> [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 >>>> [<ffffffff812f40c0>] bio_endio+0x40/0x60 >>>> [<ffffffffa055fa6c>] end_workqueue_fn+0x3c/0x40 [btrfs] >>>> [<ffffffffa05993f1>] normal_work_helper+0xc1/0x300 [btrfs] >>>> [<ffffffff810a1352>] ? finish_task_switch+0x82/0x280 >>>> [<ffffffffa0599702>] btrfs_endio_helper+0x12/0x20 [btrfs] >>>> [<ffffffff81093844>] process_one_work+0x154/0x400 >>>> [<ffffffff8109438a>] worker_thread+0x11a/0x460 >>>> [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 >>>> [<ffffffff810993f9>] kthread+0xc9/0xe0 >>>> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >>>> [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 >>>> [<ffffffff81099330>] ? kthread_park+0x60/0x60 >>>> Code: ff ff eb 92 be 3a 02 00 00 48 c7 c7 de 81 7a 81 e8 d6 34 fe ff >>>> e9 >>>> d5 fe ff ff 90 66 66 66 66 90 55 48 8b 87 00 04 00 00 48 89 e5 <48> >>>> 8b >>>> 40 d8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 >>>> RIP [<ffffffff81099b60>] kthread_data+0x10/0x20 >>>> RSP <ffff88005b97b980> >>>> CR2: ffffffffffffffd8 >>>> ---[ end trace 001cc830ec804da8 ]--- >>>> Fixing recursive fault but reboot is needed! >>>> >>>> Current details: >>>> $ btrfs fi show >>>> Label: 'BTRFS' uuid: 41cda023-1c96-4174-98ba-f29a3d38cd85 >>>> Total devices 5 FS bytes used 4.81TiB >>>> devid 1 size 2.73TiB used 1.66TiB path /dev/xvdc >>>> devid 2 size 2.73TiB used 1.67TiB path /dev/xvdd >>>> devid 3 size 1.82TiB used 1.82TiB path /dev/xvde >>>> devid 5 size 1.82TiB used 1.82TiB path /dev/xvdg >>>> *** Some devices missing >>>> >>>> $ btrfs fi df /mnt/fileshare >>>> Data, RAID6: total=5.14TiB, used=4.81TiB >>>> System, RAID6: total=160.00MiB, used=608.00KiB >>>> Metadata, RAID6: total=6.19GiB, used=5.19GiB >>>> GlobalReserve, single: total=512.00MiB, used=0.00B >>>> >>>> [ 12.833431] Btrfs loaded >>>> [ 12.834339] BTRFS: device label BTRFS devid 1 transid 46614 >>>> /dev/xvdc >>>> [ 12.861109] BTRFS: device label BTRFS devid 0 transid 46614 >>>> /dev/xvdf >>>> [ 12.861357] BTRFS: device label BTRFS devid 3 transid 46614 >>>> /dev/xvde >>>> [ 12.862859] BTRFS: device label BTRFS devid 2 transid 46614 >>>> /dev/xvdd >>>> [ 12.863372] BTRFS: device label BTRFS devid 5 transid 46614 >>>> /dev/xvdg >>>> [ 379.629911] BTRFS info (device xvdg): allowing degraded mounts >>>> [ 379.630028] BTRFS info (device xvdg): not using ssd allocation >>>> scheme >>>> [ 379.630120] BTRFS info (device xvdg): disk space caching is >>>> enabled >>>> [ 379.630207] BTRFS: has skinny extents >>>> [ 379.631024] BTRFS warning (device xvdg): devid 4 uuid >>>> 61ccce61-9787-453e-b793-1b86f8015ee1 is missing >>>> [ 383.675967] BTRFS info (device xvdg): continuing dev_replace from >>>> <missing disk> (devid 4) to /dev/xvdf @0% >>>> >>>> I've currently cancelled the replace with a btrfs replace cancel >>>> /mnt/fileshare - so at least the system doesn't crash completely in >>>> the >>>> meantime - and mounted it with -o degraded until I can see what the >>>> deal >>>> is here. >>>> >>>> Any suggestions? >>>> >>> The first thing I would suggest is to follow the suggestion at the >>> bottom of the back-trace you got, and reboot your system. If you've >>> hit >>> a recursive page fault, then something is going seriously wrong, and >>> you >>> really can't trust the state of the system afterwards. >> >> It doesn't give me a choice here - the entire VM becomes unresponsive >> :) >> >>> Now, with that out of the way, I think you've actually hit two bugs. >>> The >>> first is a known issue with a currently unknown cause in the BTRFS >>> raid6 >>> code which causes rebuilds to take extremely long amounts of time >>> (the >>> only time I've seen this happen myself it took 8 hours to rebuild a >>> FS >>> with only a few hundred GB of data on it, when the same operation >>> with a >>> raid1 profile took only about 20 minutes). The second appears to be >>> a >>> previously unreported (at least, I've never seen anything like this >>> reported) issue in the in-line compression code. You may be able to >>> work around the second bug short term by turning off compression in >>> the >>> mount options, but I'm not 100% certain if this will help. >>> >>> Expanding further on this all though, after rebooting, see if you get >>> the same BUG output after rebooting the system (before turning off >>> compression in the mount options). If it doesn't happen again, then >>> I'd >>> seriously suggest checking your hardware, as certain types of RAM >>> and/or >>> CPU issues can trigger things like this, and while this particular >>> symptom only shows up intermittently, the primary symptom is data >>> corruption in RAM. >> >> What seems to happen is that the system will boot again, I mount the >> filesystem, it says "Cool! I was doing a replace. I should resume it" >> and then promptly die with a similar crash again. >> >>> As far as the raid6 rebuild issue, there's currently not any known >>> method to fix it, let alone any known way to reliably reproduce it >>> (multiple people have reported it, but I don't know of anyone who has >>> been able to reliably reproduce it starting with a new filesystem). >>> Given this and the couple of other known issues in the raid5/6 code >>> (one >>> being a slightly different form of the traditional 'write hole', and >>> the >>> other being an issue with scrub parsing device stats), general advice >>> here is to avoid using raid5/6 for production systems for the time >>> being. >> >> Right now, I've cancelled the replace via 'btrfs replace cancel', >> which >> freed up the device. I this did: >> $ btrfs device add /dev/xvdf /mnt/fileshare >> $ btrfs device delete missing /mnt/fileshare >> >> This seems to be rebalancing the data from all drives (and I assume >> recalculating anything that is missing) onto the 'new' target. > > Indeed, device replace seems to be broken with raid5/6, but device add > / device delete missing seems to work (and is much faster, as you've > noted). As a side note, I got another full system hang this morning after quite a few hours of running. Messages below: BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 5339602026496 csum 399817615 wanted 3840371950 mirror 3 BTRFS info (device xvdg): csum failed ino 12521 extent 8902017024 csum 3887811728 wanted 2315444503 mirror 0 BTRFS info (device xvdg): csum failed ino 12521 extent 8902344704 csum 2798881146 wanted 1587371870 mirror 0 BTRFS info (device xvdg): csum failed ino 12521 extent 8902344704 csum 2488608519 wanted 1587371870 mirror 1 BTRFS info (device xvdg): csum failed ino 12521 extent 8902344704 csum 184164728 wanted 1587371870 mirror 1 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:2401! invalid opcode: 0000 [#1] SMP Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs aesni_intel xor aes_x86_64 lrw gf128mul glue_helper ablk_helper pcspkr cryptd raid6_pq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xen_netfront crc32c_inte l xen_gntalloc xen_evtchn ipv6 autofs4 CPU: 1 PID: 3497 Comm: kworker/u4:2 Not tainted 4.4.13-1.el7xen.x86_64 #1 Workqueue: btrfs-endio btrfs_endio_helper [btrfs] task: ffff880079f6cd00 ti: ffff880061a38000 task.ti: ffff880061a38000 RIP: e030:[<ffffffffa031d0e0>] [<ffffffffa031d0e0>] btrfs_check_repairable+0x100/0x110 [btrfs] RSP: e02b:ffff880061a3bcc8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88004b2c1300 RCX: 0000000000000003 RDX: 0000000000000003 RSI: 000004db396b0000 RDI: ffff880078006f38 RBP: ffff880061a3bce0 R08: 000004db01c00000 R09: 000004dbc1c00000 R10: ffff88004d60e978 R11: 0000000047cc409e R12: 0000000047cc409e R13: ffff88005f1ebd68 R14: 0000000000001000 R15: 0000000000000000 FS: 00007fc2fc088840(0000) GS:ffff88007f500000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcfb3bea000 CR3: 000000007bc9e000 CR4: 0000000000042660 Stack: ffffea0000d6e540 0000000000081000 ffff88005f1ebdf0 ffff880061a3bd88 ffffffffa031f808 ffff88005a87c500 ffff880061a3bd18 ffff880079f6cd00 ffff88005f1ebd00 000000000000001f ffff880047cc409e ffff88004d60e808 Call Trace: [<ffffffffa031f808>] end_bio_extent_readpage+0x428/0x560 [btrfs] [<ffffffff812f40c0>] bio_endio+0x40/0x60 [<ffffffffa02f4a6c>] end_workqueue_fn+0x3c/0x40 [btrfs] [<ffffffffa032e3f1>] normal_work_helper+0xc1/0x300 [btrfs] [<ffffffff810917ce>] ? pwq_activate_delayed_work+0x3e/0x90 [<ffffffffa032e702>] btrfs_endio_helper+0x12/0x20 [btrfs] [<ffffffff81093844>] process_one_work+0x154/0x400 [<ffffffff8109438a>] worker_thread+0x11a/0x460 [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff810993f9>] kthread+0xc9/0xe0 [<ffffffff81099330>] ? kthread_park+0x60/0x60 [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 [<ffffffff81099330>] ? kthread_park+0x60/0x60 Code: 00 31 c0 eb d5 8d 48 02 eb d9 31 c0 45 89 e0 48 c7 c6 a0 e8 37 a0 48 c7 c7 00 f5 38 a0 e8 c9 02 03 e1 31 c0 e9 70 ff ff ff 0f 0b <0f> 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 RIP [<ffffffffa031d0e0>] btrfs_check_repairable+0x100/0x110 [btrfs] RSP <ffff880061a3bcc8> ---[ end trace a276532fe6a90864 ]--- BUG: unable to handle kernel paging request at ffffffffffffffd8 IP: [<ffffffff81099b60>] kthread_data+0x10/0x20 PGD 188d067 PUD 188f067 PMD 0 Oops: 0000 [#2] SMP Modules linked in: x86_pkg_temp_thermal coretemp crct10dif_pclmul btrfs aesni_intel xor aes_x86_64 lrw gf128mul glue_helper ablk_helper pcspkr cryptd raid6_pq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xen_netfront crc32c_intel xen_gntalloc xen_evtchn ipv6 autofs4 CPU: 1 PID: 3497 Comm: kworker/u4:2 Tainted: G D 4.4.13-1.el7xen.x86_64 #1 task: ffff880079f6cd00 ti: ffff880061a38000 task.ti: ffff880061a38000 RIP: e030:[<ffffffff81099b60>] [<ffffffff81099b60>] kthread_data+0x10/0x20 RSP: e02b:ffff880061a3b9c0 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 RDX: ffffffff81bd5080 RSI: 0000000000000001 RDI: ffff880079f6cd00 RBP: ffff880061a3b9c0 R08: 0000000000000001 R09: 000018381d96494d R10: 000000000000001f R11: 0000000000000000 R12: ffff880079f6cd00 R13: 0000000000000000 R14: 00000000000163c0 R15: 0000000000000001 FS: 00007fc2fc088840(0000) GS:ffff88007f500000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 000000007bc9e000 CR4: 0000000000042660 Stack: ffff880061a3b9d8 ffffffff81094751 ffff88007f5163c0 ffff880061a3ba20 ffffffff8165a34f ffff88000283e580 ffff880079f6cd00 ffff880061a3c000 ffff880079f6d050 0000000000000200 ffff880079f6cd00 ffff88007cffacc0 Call Trace: [<ffffffff81094751>] wq_worker_sleeping+0x11/0x90 [<ffffffff8165a34f>] __schedule+0x3bf/0x880 [<ffffffff8165a845>] schedule+0x35/0x80 [<ffffffff8107fc3f>] do_exit+0x65f/0xad0 [<ffffffff8101a5ea>] oops_end+0x9a/0xd0 [<ffffffff8101aa4b>] die+0x4b/0x70 [<ffffffff81017c8d>] do_trap+0x13d/0x150 [<ffffffff81018337>] do_error_trap+0x77/0xe0 [<ffffffffa031d0e0>] ? btrfs_check_repairable+0x100/0x110 [btrfs] [<ffffffff8115b9f4>] ? free_hot_cold_page+0x104/0x160 [<ffffffff811a877c>] ? kmem_cache_free+0xcc/0x2c0 [<ffffffff8115bb25>] ? __free_pages+0x25/0x30 [<ffffffff8115bd0e>] ? __free_kmem_pages+0xe/0x10 [<ffffffff810184d0>] do_invalid_op+0x20/0x30 [<ffffffff8165f8ce>] invalid_op+0x1e/0x30 [<ffffffffa031d0e0>] ? btrfs_check_repairable+0x100/0x110 [btrfs] [<ffffffffa031d012>] ? btrfs_check_repairable+0x32/0x110 [btrfs] [<ffffffffa031f808>] end_bio_extent_readpage+0x428/0x560 [btrfs] [<ffffffff812f40c0>] bio_endio+0x40/0x60 [<ffffffffa02f4a6c>] end_workqueue_fn+0x3c/0x40 [btrfs] [<ffffffffa032e3f1>] normal_work_helper+0xc1/0x300 [btrfs] [<ffffffff810917ce>] ? pwq_activate_delayed_work+0x3e/0x90 [<ffffffffa032e702>] btrfs_endio_helper+0x12/0x20 [btrfs] [<ffffffff81093844>] process_one_work+0x154/0x400 [<ffffffff8109438a>] worker_thread+0x11a/0x460 [<ffffffff81094270>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff810993f9>] kthread+0xc9/0xe0 [<ffffffff81099330>] ? kthread_park+0x60/0x60 [<ffffffff8165e14f>] ret_from_fork+0x3f/0x70 [<ffffffff81099330>] ? kthread_park+0x60/0x60 Code: ff ff eb 92 be 3a 02 00 00 48 c7 c7 de 81 7a 81 e8 d6 34 fe ff e9 d5 fe ff ff 90 66 66 66 66 90 55 48 8b 87 00 04 00 00 48 89 e5 <48> 8b 40 d8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 RIP [<ffffffff81099b60>] kthread_data+0x10/0x20 RSP <ffff880061a3b9c0> CR2: ffffffffffffffd8 ---[ end trace a276532fe6a90865 ]--- Fixing recursive fault but reboot is needed -- Steven Haigh Email: netwiz@crc.id.au Web: https://www.crc.id.au Phone: (03) 9001 6090 - 0412 935 897 ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-06-24 1:13 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-06-23 17:44 system crash on replace Steven Haigh 2016-06-23 18:35 ` Austin S. Hemmelgarn 2016-06-23 18:55 ` Steven Haigh 2016-06-23 19:13 ` Scott Talbert 2016-06-24 1:12 ` Steven Haigh
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).