[PATCH v2 0/6] btrfs: simple quotas fstests

[PATCH v2 0/6] btrfs: simple quotas fstests

[Boris Burkov]

Add new tests (btrfs/400 for now, but intend to grab a real number
before the last version)

Also made modifications for passing existing qgroups tests when possible
and for passing all tests with simple quota enabled via mkfs and with
squota-aware `btrfs check`. Since this required reading sysfs files of
scratch fses, did a bit of refactoring to make those checks target a
device rather than assuming TEST_DEV.

btrfs/400 depends on the kernel patchset:
https://lore.kernel.org/linux-btrfs/cover.1694563454.git.boris@bur.io/
and the btrfs-progs patchset:
https://lore.kernel.org/linux-btrfs/cover.1695836680.git.boris@bur.io/
(and config appropriate binaries to use squota-aware versions)
---
Changelog:
v2:
- new sysfs helpers in common
- better gating for the new squota test
- fix various formatting issues
- get rid of noisy dmesg logging

Boris Burkov (6):
  common: refactor sysfs_attr functions
  btrfs: quota mode helpers
  btrfs/400: new test for simple quotas
  btrfs: quota rescan helpers
  btrfs: use new rescan wrapper
  btrfs: skip squota incompatible tests

 common/btrfs        |  56 ++++++
 common/rc           | 127 ++++++++-----
 tests/btrfs/017     |   1 +
 tests/btrfs/022     |   1 +
 tests/btrfs/028     |   2 +-
 tests/btrfs/057     |   1 +
 tests/btrfs/091     |   3 +-
 tests/btrfs/104     |   2 +-
 tests/btrfs/123     |   2 +-
 tests/btrfs/126     |   2 +-
 tests/btrfs/139     |   2 +-
 tests/btrfs/153     |   2 +-
 tests/btrfs/171     |   6 +-
 tests/btrfs/179     |   2 +-
 tests/btrfs/180     |   2 +-
 tests/btrfs/190     |   2 +-
 tests/btrfs/193     |   2 +-
 tests/btrfs/210     |   2 +-
 tests/btrfs/224     |   6 +-
 tests/btrfs/230     |   2 +-
 tests/btrfs/232     |   2 +-
 tests/btrfs/400     | 423 ++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/400.out |   2 +
 23 files changed, 587 insertions(+), 65 deletions(-)
 create mode 100755 tests/btrfs/400
 create mode 100644 tests/btrfs/400.out

-- 
2.42.0

[PATCH v2 1/6] common: refactor sysfs_attr functions

[Boris Burkov]

Expand the has/get/require functions to allow passing a dev by
parameter, and implement the test_dev specific one in terms of the new
generic one.

Signed-off-by: Boris Burkov <boris@bur.io>
---
 common/rc | 127 +++++++++++++++++++++++++++++++++++-------------------
 1 file changed, 82 insertions(+), 45 deletions(-)

diff --git a/common/rc b/common/rc
index 1618ded54..c3cd53546 100644
--- a/common/rc
+++ b/common/rc
@@ -4689,47 +4689,33 @@ run_fsx()
 	rm -f $tmp.fsx
 }
 
-# Test for the existence of a sysfs entry at /sys/fs/$FSTYP/DEV/$ATTR
+_require_statx()
+{
+	$here/src/stat_test --check-statx ||
+	_notrun "This test requires the statx system call"
+}
+
+# Get the path to the sysfs directory for the fs on a device
 #
 # Only one argument is needed:
-#  - attr: path name under /sys/fs/$FSTYP/DEV
+#  - dev: mounted block device for the fs
 #
 # Usage example:
-#   _require_fs_sysfs error/fail_at_unmount
-_has_fs_sysfs()
+#   _fs_sysfs_dname /dev/mapper/scratch-dev
+_fs_sysfs_dname()
 {
-	local attr=$1
-	local dname
+	local dev=$1
+
+	if [ ! -b "$dev" ]; then
+		_fail "Usage: _fs_sysfs_dname <mounted_device>"
+	fi
 
 	case "$FSTYP" in
 	btrfs)
-		dname=$(findmnt -n -o UUID $TEST_DEV) ;;
+		findmnt -n -o UUID ${dev} ;;
 	*)
-		dname=$(_short_dev $TEST_DEV) ;;
+		_short_dev $dev ;;
 	esac
-
-	if [ -z "$attr" -o -z "$dname" ];then
-		_fail "Usage: _require_fs_sysfs <sysfs_attr_path>"
-	fi
-
-	test -e /sys/fs/${FSTYP}/${dname}/${attr}
-}
-
-# Require the existence of a sysfs entry at /sys/fs/$FSTYP/DEV/$ATTR
-_require_fs_sysfs()
-{
-	_has_fs_sysfs "$@" && return
-
-	local attr=$1
-	local dname=$(_short_dev $TEST_DEV)
-
-	_notrun "This test requires /sys/fs/${FSTYP}/${dname}/${attr}"
-}
-
-_require_statx()
-{
-	$here/src/stat_test --check-statx ||
-	_notrun "This test requires the statx system call"
 }
 
 # Write "content" into /sys/fs/$FSTYP/$DEV/$ATTR
@@ -4753,13 +4739,7 @@ _set_fs_sysfs_attr()
 		_fail "Usage: _set_fs_sysfs_attr <mounted_device> <attr> <content>"
 	fi
 
-	local dname
-	case "$FSTYP" in
-	btrfs)
-		dname=$(findmnt -n -o UUID ${dev}) ;;
-	*)
-		dname=$(_short_dev $dev) ;;
-	esac
+	local dname=$(_fs_sysfs_dname $dev)
 
 	echo "$content" > /sys/fs/${FSTYP}/${dname}/${attr}
 }
@@ -4781,17 +4761,74 @@ _get_fs_sysfs_attr()
 		_fail "Usage: _get_fs_sysfs_attr <mounted_device> <attr>"
 	fi
 
-	local dname
-	case "$FSTYP" in
-	btrfs)
-		dname=$(findmnt -n -o UUID ${dev}) ;;
-	*)
-		dname=$(_short_dev $dev) ;;
-	esac
+	local dname=$(_fs_sysfs_dname $dev)
 
 	cat /sys/fs/${FSTYP}/${dname}/${attr}
 }
 
+# Test for the existence of a sysfs entry at /sys/fs/$FSTYP/$DEV/$ATTR
+#
+# All arguments are necessary, and in this order:
+#  - dev: device name, e.g. $SCRATCH_DEV
+#  - attr: path name under /sys/fs/$FSTYP/$dev
+#
+# Usage example:
+#   _has_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount
+_has_fs_sysfs_attr()
+{
+	local dev=$1
+	local attr=$2
+
+	if [ ! -b "$dev" -o -z "$attr" ];then
+		_fail "Usage: _get_fs_sysfs_attr <mounted_device> <attr>"
+	fi
+
+	local dname=$(_fs_sysfs_dname $dev)
+
+	test -e /sys/fs/${FSTYP}/${dname}/${attr}
+}
+
+# Require the existence of a sysfs entry at /sys/fs/$FSTYP/$DEV/$ATTR
+# All arguments are necessary, and in this order:
+#  - dev: device name, e.g. $SCRATCH_DEV
+#  - attr: path name under /sys/fs/$FSTYP/$dev
+#
+# Usage example:
+#   _require_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount
+_require_fs_sysfs_attr()
+{
+	_has_fs_sysfs_attr "$@" && return
+
+	local dev=$1
+	local attr=$2
+	local dname=$(_fs_sysfs_dname $dev)
+
+	_notrun "This test requires /sys/fs/${FSTYP}/${dname}/${attr}"
+}
+
+# Test for the existence of a sysfs entry at /sys/fs/$FSTYP/DEV/$ATTR
+#
+# Only one argument is needed:
+#  - attr: path name under /sys/fs/$FSTYP/DEV
+#
+# Usage example:
+#   _has_fs_sysfs error/fail_at_unmount
+_has_fs_sysfs()
+{
+	_has_fs_sysfs_attr $TEST_DEV "$@"
+}
+
+# Require the existence of a sysfs entry at /sys/fs/$FSTYP/DEV/$ATTR
+_require_fs_sysfs()
+{
+	_has_fs_sysfs "$@" && return
+
+	local attr=$1
+	local dname=$(_short_dev $TEST_DEV)
+
+	_notrun "This test requires /sys/fs/${FSTYP}/${dname}/${attr}"
+}
+
 # Generic test for specific filesystem feature.
 # Currently only implemented to test overlayfs features.
 _require_scratch_feature()
-- 
2.42.0

[PATCH v2 2/6] btrfs: quota mode helpers

[Boris Burkov]

To facilitate skipping tests depending on the qgroup mode after mkfs,
add support for figuring out the mode. This cannot just rely on the new
sysfs file, since it might not be present on older kernels.

Signed-off-by: Boris Burkov <boris@bur.io>
---
 common/btrfs | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/common/btrfs b/common/btrfs
index c9903a413..37796cc6e 100644
--- a/common/btrfs
+++ b/common/btrfs
@@ -689,3 +689,41 @@ _require_btrfs_scratch_logical_resolve_v2()
 	fi
 	_scratch_unmount
 }
+
+_qgroup_mode()
+{
+	local dev=$1
+
+	if [ ! -b "$dev" ]; then
+		_fail "Usage: _qgroup_mode <mounted_device>"
+	fi
+
+	if _has_fs_sysfs_attr $dev /qgroups/mode; then
+		_get_fs_sysfs_attr $dev qgroups/mode
+	else
+		echo "disabled"
+	fi
+}
+
+_check_regular_qgroup()
+{
+	_qgroup_mode "$@" | grep -q 'qgroup'
+}
+
+_require_scratch_qgroup()
+{
+	_scratch_mkfs >>$seqres.full 2>&1
+	_scratch_mount
+	_run_btrfs_util_prog quota enable $SCRATCH_MNT
+	_check_regular_qgroup $SCRATCH_DEV || _notrun "not running normal qgroups"
+	_scratch_unmount
+}
+
+_require_scratch_enable_simple_quota()
+{
+    _scratch_mkfs >>$seqres.full 2>&1
+    _scratch_mount
+	_qgroup_mode $SCRATCH_DEV | grep 'squota' && _notrun "cannot enable simple quota; on by default"
+    $BTRFS_UTIL_PROG quota enable --simple $SCRATCH_MNT || _notrun "simple quotas not available"
+	_scratch_unmount
+}
-- 
2.42.0

[PATCH v2 3/6] btrfs/400: new test for simple quotas

[Boris Burkov]

Test some interesting basic and edge cases of simple quotas.

To some extent, this is redundant with the alternate testing strategy of
using MKFS_OPTIONS to enable simple quotas, running the full suite and
relying on kernel warnings and fsck to surface issues.

Signed-off-by: Boris Burkov <boris@bur.io>
---
 tests/btrfs/400     | 418 ++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/400.out |   2 +
 2 files changed, 420 insertions(+)
 create mode 100755 tests/btrfs/400
 create mode 100644 tests/btrfs/400.out

diff --git a/tests/btrfs/400 b/tests/btrfs/400
new file mode 100755
index 000000000..a6d59ba5e
--- /dev/null
+++ b/tests/btrfs/400
@@ -0,0 +1,418 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2023 Meta Platforms, Inc.  All Rights Reserved.
+#
+# FS QA Test 400
+#
+# Test common btrfs simple quotas scenarios involving sharing extents and
+# removing them in various orders.
+#
+. ./common/preamble
+_begin_fstest auto quick qgroup copy_range snapshot
+
+# Import common functions.
+# . ./common/filter
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_require_scratch
+_require_scratch_enable_simple_quota
+
+subv=$SCRATCH_MNT/subv
+nested=$SCRATCH_MNT/subv/nested
+snap=$SCRATCH_MNT/snap
+k=1024
+m=$(($k * $k))
+nr_fill=1024
+fill_sz=$((8 * $k))
+total_fill=$(($nr_fill * $fill_sz))
+eb_sz=$((16 * $k))
+ext_sz=$((128 * m))
+limit_nr=8
+limit=$(($ext_sz * $limit_nr))
+
+get_qgroup_usage()
+{
+	local qgroupid=$1
+
+	$BTRFS_UTIL_PROG qgroup show --sync --raw $SCRATCH_MNT | grep "$qgroupid" | $AWK_PROG '{print $3}'
+}
+
+get_subvol_usage()
+{
+	local subvolid=$1
+	get_qgroup_usage "0/$subvolid"
+}
+
+count_subvol_owned_metadata()
+{
+	local subvolid=$1
+	# find nodes and leaves owned by the subvol, then get unique offsets
+	# to account for snapshots sharing metadata.
+	count=$($BTRFS_UTIL_PROG inspect-internal dump-tree $SCRATCH_DEV | \
+		grep "owner $subvolid" | awk '{print $2}' | sort | uniq | wc -l)
+	# output bytes rather than number of metadata blocks
+	echo $(($count * $eb_sz))
+}
+
+check_qgroup_usage()
+{
+	local qgroupid=$1
+	local expected=$2
+	local actual=$(get_qgroup_usage $qgroupid)
+
+	[ $expected -eq $actual ] || _fail "qgroup $qgroupid mismatched usage $actual vs $expected"
+}
+
+check_subvol_usage()
+{
+	local subvolid=$1
+	local expected_data=$2
+	# need to sync to see updated usage numbers.
+	# could probably improve by placing syncs only where they are strictly
+	# needed after actual operations, but it is more error prone.
+	sync
+
+	local expected_meta=$(count_subvol_owned_metadata $subvolid)
+	local actual=$(get_subvol_usage $subvolid)
+	local expected=$(($expected_data + $expected_meta))
+
+	[ $expected -eq $actual ] || _fail "subvol $subvolid mismatched usage $actual vs $expected (expected data $expected_data expected meta $expected_meta diff $(($actual - $expected)))"
+	echo "OK $subvolid $expected_data $expected_meta $actual" >> $seqres.full
+}
+
+set_subvol_limit()
+{
+	local subvolid=$1
+	local limit=$2
+
+	$BTRFS_UTIL_PROG qgroup limit $2 0/$1 $SCRATCH_MNT
+}
+
+sync_check_subvol_usage()
+{
+	sync
+	check_subvol_usage $@
+}
+
+trigger_cleaner()
+{
+	$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT
+	sleep 1
+	$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT
+}
+
+cycle_mount_check_subvol_usage()
+{
+	_scratch_cycle_mount
+	check_subvol_usage $@
+}
+
+
+do_write()
+{
+	local file=$1
+	local sz=$2
+
+	$XFS_IO_PROG -fc "pwrite -q 0 $sz" $file
+	local ret=$?
+	return $ret
+}
+
+do_enospc_write()
+{
+	local file=$1
+	local sz=$2
+
+	do_write $file $sz 2>/dev/null && _fail "write expected enospc"
+}
+
+do_falloc()
+{
+	local file=$1
+	local sz=$2
+
+	$XFS_IO_PROG -fc "falloc 0 $sz" $file
+}
+
+do_enospc_falloc()
+{
+	local file=$1
+	local sz=$2
+
+	do_falloc $file $sz 2>/dev/null && _fail "falloc expected enospc"
+}
+
+enable_quota()
+{
+	local mode=$1
+
+	[ $mode == "n" ] && return
+	arg=$([ $mode == "s" ] && echo "--simple")
+
+	$BTRFS_UTIL_PROG quota enable $arg $SCRATCH_MNT
+}
+
+prepare()
+{
+	_scratch_mkfs >> $seqres.full
+	_scratch_mount
+	enable_quota "s"
+	$BTRFS_UTIL_PROG subvolume create $subv >> $seqres.full
+	set_subvol_limit 256 $limit
+	check_subvol_usage 256 0
+
+	# Create a bunch of little filler files to generate several levels in
+	# the btree, to make snapshotting sharing scenarios complex enough.
+	$FIO_PROG --name=filler --directory=$subv --rw=randwrite --nrfiles=$nr_fill --filesize=$fill_sz >/dev/null 2>&1
+	check_subvol_usage 256 $total_fill
+
+	# Create a single file whose extents we will explicitly share/unshare.
+	do_write $subv/f $ext_sz
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+}
+
+prepare_snapshotted()
+{
+	prepare
+	$BTRFS_UTIL_PROG subvolume snapshot $subv $snap >> $seqres.full
+	echo "snapshot" >> $seqres.full
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	check_subvol_usage 257 0
+}
+
+prepare_nested()
+{
+	prepare
+	$BTRFS_UTIL_PROG qgroup create 1/100 $SCRATCH_MNT
+	$BTRFS_UTIL_PROG qgroup assign 0/256 1/100 $SCRATCH_MNT >> $seqres.full
+	$BTRFS_UTIL_PROG subvolume create $nested >> $seqres.full
+	do_write $nested/f $ext_sz
+	check_subvol_usage 257 $ext_sz
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	local subv_usage=$(get_subvol_usage 256)
+	local nested_usage=$(get_subvol_usage 257)
+	check_qgroup_usage 1/100 $(($subv_usage + $nested_usage))
+}
+
+basic_accounting()
+{
+	prepare
+	echo "basic" >> $seqres.full
+	echo "delete file" >> $seqres.full
+	rm $subv/f
+	check_subvol_usage 256 $total_fill
+	cycle_mount_check_subvol_usage 256 $total_fill
+	do_write $subv/tmp 512M
+	rm $subv/tmp
+	do_write $subv/tmp 512M
+	rm $subv/tmp
+	do_enospc_falloc $subv/large_falloc 2G
+	do_enospc_write $subv/large 2G
+	_scratch_unmount
+}
+
+reservation_accounting()
+{
+	prepare
+	for i in $(seq 10); do
+		do_write $subv/tmp 512M
+		rm $subv/tmp
+	done
+	do_enospc_write $subv/large 2G
+	_scratch_unmount
+}
+
+snapshot_accounting()
+{
+	prepare_snapshotted
+	echo "unshare snapshot metadata" >> $seqres.full
+	touch $snap/f
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	check_subvol_usage 257 0
+	echo "unshare snapshot data" >> $seqres.full
+	do_write $snap/f $ext_sz
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	check_subvol_usage 257 $ext_sz
+	echo "delete snapshot file" >> $seqres.full
+	rm $snap/f
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	check_subvol_usage 257 0
+	echo "delete original file" >> $seqres.full
+	rm $subv/f
+	check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 0
+	cycle_mount_check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 0
+	_scratch_unmount
+}
+
+delete_subvol_file()
+{
+	prepare_snapshotted
+	echo "delete subvol file first" >> $seqres.full
+	rm $subv/f
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	check_subvol_usage 257 0
+	rm $snap/f
+	trigger_cleaner
+	check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 0
+	cycle_mount_check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 0
+	_scratch_unmount
+}
+
+delete_snapshot_file()
+{
+	prepare_snapshotted
+	echo "delete snapshot file first" >> $seqres.full
+	rm $snap/f
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	check_subvol_usage 257 0
+	rm $subv/f
+	check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 0
+	cycle_mount_check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 0
+	_scratch_unmount
+}
+
+delete_subvol()
+{
+	echo "del sv" > /dev/ksmg
+	prepare_snapshotted
+	echo "delete subvol first" >> $seqres.full
+	$BTRFS_UTIL_PROG subvolume delete $subv >> $seqres.full
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	check_subvol_usage 257 0
+	rm $snap/f
+	trigger_cleaner
+	check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 0
+	$BTRFS_UTIL_PROG subvolume delete $snap >> $seqres.full
+	trigger_cleaner
+	check_subvol_usage 256 0
+	check_subvol_usage 257 0
+	cycle_mount_check_subvol_usage 256 0
+	check_subvol_usage 257 0
+	_scratch_unmount
+}
+
+delete_snapshot()
+{
+	echo "del snap" > /dev/ksmg
+	prepare_snapshotted
+	echo "delete snapshot first" >> $seqres.full
+	$BTRFS_UTIL_PROG subvolume delete $snap >> $seqres.full
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	check_subvol_usage 257 0
+	$BTRFS_UTIL_PROG subvolume delete $subv >> $seqres.full
+	trigger_cleaner
+	check_subvol_usage 256 0
+	check_subvol_usage 257 0
+	_scratch_unmount
+}
+
+nested_accounting()
+{
+	echo "nested" > /dev/ksmg
+	prepare_nested
+	echo "nested" >> $seqres.full
+	echo "delete file" >> $seqres.full
+	rm $subv/f
+	check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 $ext_sz
+	local subv_usage=$(get_subvol_usage 256)
+	local nested_usage=$(get_subvol_usage 257)
+	check_qgroup_usage 1/100 $(($subv_usage + $nested_usage))
+	rm $nested/f
+	check_subvol_usage 256 $total_fill
+	check_subvol_usage 257 0
+	subv_usage=$(get_subvol_usage 256)
+	nested_usage=$(get_subvol_usage 257)
+	check_qgroup_usage 1/100 $(($subv_usage + $nested_usage))
+	_scratch_unmount
+}
+
+enable_mature()
+{
+	echo "mature" > /dev/ksmg
+	_scratch_mkfs >> $seqres.full
+	_scratch_mount
+	$BTRFS_UTIL_PROG subvolume create $subv >> $seqres.full
+	do_write $subv/f $ext_sz
+	sync
+	enable_quota "s"
+	set_subvol_limit 256 $limit
+	_scratch_cycle_mount
+	usage=$(get_subvol_usage 256)
+	[ $usage -lt $ext_sz ] || _fail "captured usage from before enable $usage"
+	do_write $subv/g $ext_sz
+	usage=$(get_subvol_usage 256)
+	[ $usage -lt $ext_sz ] && "failed to capture usage after enable $usage"
+	check_subvol_usage 256 $ext_sz
+	rm $subv/f
+	check_subvol_usage 256 $ext_sz
+	_scratch_cycle_mount
+	rm $subv/g
+	check_subvol_usage 256 0
+	_scratch_unmount
+}
+
+reflink_accounting()
+{
+	prepare
+	# do more reflinks than would fit
+	for i in $(seq $(($limit_nr * 2))); do
+		cp --reflink=always $subv/f $subv/f.i
+	done
+	# no additional data usage from reflinks
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	_scratch_unmount
+}
+
+delete_link()
+{
+	prepare
+	cp --reflink=always $subv/f $subv/f.link
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	rm $subv/f.link
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	rm $subv/f
+	check_subvol_usage 256 $(($total_fill))
+	_scratch_unmount
+}
+
+delete_linked()
+{
+	prepare
+	cp --reflink=always $subv/f $subv/f.link
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	rm $subv/f
+	check_subvol_usage 256 $(($total_fill + $ext_sz))
+	rm $subv/f.link
+	check_subvol_usage 256 $(($total_fill))
+	_scratch_unmount
+}
+
+basic_accounting
+reservation_accounting
+snapshot_accounting
+delete_subvol_file
+delete_snapshot_file
+delete_subvol
+delete_snapshot
+nested_accounting
+enable_mature
+reflink_accounting
+delete_link
+delete_linked
+
+echo "Silence is golden"
+
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/400.out b/tests/btrfs/400.out
new file mode 100644
index 000000000..c940c6206
--- /dev/null
+++ b/tests/btrfs/400.out
@@ -0,0 +1,2 @@
+QA output created by 400
+Silence is golden
-- 
2.42.0

[PATCH v2 4/6] btrfs: quota rescan helpers

[Boris Burkov]

Many btrfs tests explicitly trigger quota rescan. This is not a
meaningful operation for simple quotas, so we wrap it in a helper that
doesn't blow up quite so badly and lets us run those tests where the
rescan is a qgroup detail.

Signed-off-by: Boris Burkov <boris@bur.io>
---
 common/btrfs | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/common/btrfs b/common/btrfs
index 37796cc6e..0053fec48 100644
--- a/common/btrfs
+++ b/common/btrfs
@@ -710,6 +710,24 @@ _check_regular_qgroup()
 	_qgroup_mode "$@" | grep -q 'qgroup'
 }
 
+_qgroup_rescan()
+{
+	local mnt=$1
+
+	_check_regular_qgroup $dev || return 1
+	_run_btrfs_util_prog quota rescan -w $mnt
+}
+
+_require_qgroup_rescan()
+{
+	_scratch_mkfs >>$seqres.full 2>&1
+	_scratch_mount
+	_run_btrfs_util_prog quota enable $SCRATCH_MNT
+	$BTRFS_UTIL_PROG quota rescan -w $SCRATCH_MNT || \
+		_notrun "not able to run quota rescan"
+	_scratch_unmount
+}
+
 _require_scratch_qgroup()
 {
 	_scratch_mkfs >>$seqres.full 2>&1
-- 
2.42.0

[PATCH v2 5/6] btrfs: use new rescan wrapper

[Boris Burkov]

These tests can pass in simple quota mode if we skip the rescans via the
wrapper.

Signed-off-by: Boris Burkov <boris@bur.io>
---
 tests/btrfs/022 | 1 +
 tests/btrfs/028 | 2 +-
 tests/btrfs/104 | 2 +-
 tests/btrfs/123 | 2 +-
 tests/btrfs/126 | 2 +-
 tests/btrfs/139 | 2 +-
 tests/btrfs/153 | 2 +-
 tests/btrfs/171 | 6 +++---
 tests/btrfs/179 | 2 +-
 tests/btrfs/180 | 2 +-
 tests/btrfs/190 | 2 +-
 tests/btrfs/193 | 2 +-
 tests/btrfs/210 | 2 +-
 tests/btrfs/224 | 6 +++---
 tests/btrfs/230 | 2 +-
 tests/btrfs/232 | 2 +-
 16 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/tests/btrfs/022 b/tests/btrfs/022
index e2d37b094..b1ef2fdf7 100755
--- a/tests/btrfs/022
+++ b/tests/btrfs/022
@@ -14,6 +14,7 @@ _begin_fstest auto qgroup limit
 
 _supported_fs btrfs
 _require_scratch
+_require_qgroup_rescan
 _require_btrfs_qgroup_report
 
 # Test to make sure we can actually turn it on and it makes sense
diff --git a/tests/btrfs/028 b/tests/btrfs/028
index fe0678f86..c4080c950 100755
--- a/tests/btrfs/028
+++ b/tests/btrfs/028
@@ -25,7 +25,7 @@ _scratch_mkfs >/dev/null
 _scratch_mount
 
 _run_btrfs_util_prog quota enable $SCRATCH_MNT
-_run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+_qgroup_rescan $SCRATCH_MNT
 
 # Increase the probability of generating de-refer extent, and decrease
 # other.
diff --git a/tests/btrfs/104 b/tests/btrfs/104
index 499de6bfb..c9528eb13 100755
--- a/tests/btrfs/104
+++ b/tests/btrfs/104
@@ -94,7 +94,7 @@ _explode_fs_tree 1 $SCRATCH_MNT/snap2/files-snap2
 # Enable qgroups now that we have our filesystem prepared. This
 # will kick off a scan which we will have to wait for.
 _run_btrfs_util_prog quota enable $SCRATCH_MNT
-_run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+_qgroup_rescan $SCRATCH_MNT
 
 # Remount to clear cache, force everything to disk
 _scratch_cycle_mount
diff --git a/tests/btrfs/123 b/tests/btrfs/123
index c179eeec9..4c5b7e116 100755
--- a/tests/btrfs/123
+++ b/tests/btrfs/123
@@ -39,7 +39,7 @@ sync
 
 # enable quota and rescan to get correct number
 _run_btrfs_util_prog quota enable $SCRATCH_MNT
-_run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+_qgroup_rescan $SCRATCH_MNT
 
 # now balance data block groups to corrupt qgroup
 _run_btrfs_balance_start -d $SCRATCH_MNT >> $seqres.full
diff --git a/tests/btrfs/126 b/tests/btrfs/126
index 2b0edb65b..1bb24e00f 100755
--- a/tests/btrfs/126
+++ b/tests/btrfs/126
@@ -28,7 +28,7 @@ _scratch_mkfs >/dev/null
 _scratch_mount "-o enospc_debug"
 
 _run_btrfs_util_prog quota enable $SCRATCH_MNT
-_run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+_qgroup_rescan $SCRATCH_MNT
 _run_btrfs_util_prog qgroup limit 512K 0/5 $SCRATCH_MNT
 
 # The amount of written data may change due to different nodesize at mkfs time,
diff --git a/tests/btrfs/139 b/tests/btrfs/139
index c4b09f9fc..f3d92ba46 100755
--- a/tests/btrfs/139
+++ b/tests/btrfs/139
@@ -30,7 +30,7 @@ SUBVOL=$SCRATCH_MNT/subvol
 
 _run_btrfs_util_prog subvolume create $SUBVOL
 _run_btrfs_util_prog quota enable $SCRATCH_MNT
-_run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+_qgroup_rescan $SCRATCH_MNT
 _run_btrfs_util_prog qgroup limit -e 1G $SUBVOL
 
 # Write and delete files within 1G limits, multiple times
diff --git a/tests/btrfs/153 b/tests/btrfs/153
index 99fab1018..4a5fe2b8c 100755
--- a/tests/btrfs/153
+++ b/tests/btrfs/153
@@ -24,7 +24,7 @@ _scratch_mkfs >/dev/null
 _scratch_mount
 
 _run_btrfs_util_prog quota enable $SCRATCH_MNT
-_run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+_qgroup_rescan $SCRATCH_MNT
 _run_btrfs_util_prog qgroup limit 100M 0/5 $SCRATCH_MNT
 
 testfile1=$SCRATCH_MNT/testfile1
diff --git a/tests/btrfs/171 b/tests/btrfs/171
index 461cdd0fa..6a1ed1c1a 100755
--- a/tests/btrfs/171
+++ b/tests/btrfs/171
@@ -35,7 +35,7 @@ $BTRFS_UTIL_PROG subvolume snapshot "$SCRATCH_MNT/subvol" \
 	"$SCRATCH_MNT/snapshot" > /dev/null
 
 $BTRFS_UTIL_PROG quota enable "$SCRATCH_MNT" > /dev/null
-$BTRFS_UTIL_PROG quota rescan -w "$SCRATCH_MNT" > /dev/null
+_qgroup_rescan $SCRATCH_MNT > /dev/null
 
 # Create high level qgroup
 $BTRFS_UTIL_PROG qgroup create 1/0 "$SCRATCH_MNT"
@@ -45,7 +45,7 @@ $BTRFS_UTIL_PROG qgroup assign "$SCRATCH_MNT/snapshot" 1/0 "$SCRATCH_MNT" \
 
 # Above assignment will mark qgroup inconsistent due to the shared extents
 # between subvol/snapshot/high level qgroup, do rescan here.
-$BTRFS_UTIL_PROG quota rescan -w "$SCRATCH_MNT" > /dev/null
+_qgroup_rescan $SCRATCH_MNT > /dev/null
 
 # Now remove the qgroup relationship and make 1/0 childless
 # Due to the shared extent outside of 1/0, we will mark qgroup inconsistent
@@ -54,7 +54,7 @@ $BTRFS_UTIL_PROG qgroup remove "$SCRATCH_MNT/snapshot" 1/0 "$SCRATCH_MNT" \
 	2>&1 | _filter_btrfs_qgroup_assign_warnings
 
 # Above removal also marks qgroup inconsistent, rescan again
-$BTRFS_UTIL_PROG quota rescan -w "$SCRATCH_MNT" > /dev/null
+_qgroup_rescan $SCRATCH_MNT > /dev/null
 
 # After the test, btrfs check will verify qgroup numbers to catch any
 # corruption.
diff --git a/tests/btrfs/179 b/tests/btrfs/179
index 479667f05..00013af0a 100755
--- a/tests/btrfs/179
+++ b/tests/btrfs/179
@@ -33,7 +33,7 @@ _scratch_mount
 mkdir -p "$SCRATCH_MNT/snapshots"
 $BTRFS_UTIL_PROG subvolume create "$SCRATCH_MNT/src" > /dev/null
 $BTRFS_UTIL_PROG quota enable "$SCRATCH_MNT" > /dev/null
-$BTRFS_UTIL_PROG quota rescan -w "$SCRATCH_MNT" > /dev/null
+_qgroup_rescan "$SCRATCH_MNT" > /dev/null
 
 fill_workload()
 {
diff --git a/tests/btrfs/180 b/tests/btrfs/180
index b7c8dac96..aa195f7b4 100755
--- a/tests/btrfs/180
+++ b/tests/btrfs/180
@@ -27,7 +27,7 @@ _scratch_mkfs > /dev/null
 _scratch_mount
 
 $BTRFS_UTIL_PROG quota enable "$SCRATCH_MNT" > /dev/null
-$BTRFS_UTIL_PROG quota rescan -w "$SCRATCH_MNT" > /dev/null
+_qgroup_rescan "$SCRATCH_MNT" > /dev/null
 $BTRFS_UTIL_PROG qgroup limit -e 1G "$SCRATCH_MNT"
 
 $XFS_IO_PROG -f -c "falloc 0 900M" "$SCRATCH_MNT/padding"
diff --git a/tests/btrfs/190 b/tests/btrfs/190
index 974438c15..f78c14fe4 100755
--- a/tests/btrfs/190
+++ b/tests/btrfs/190
@@ -30,7 +30,7 @@ _log_writes_mkfs >> $seqres.full 2>&1
 
 _log_writes_mount
 $BTRFS_UTIL_PROG quota enable $SCRATCH_MNT >> $seqres.full
-$BTRFS_UTIL_PROG quota rescan -w $SCRATCH_MNT >> $seqres.full
+_qgroup_rescan $SCRATCH_MNT >> $seqres.full
 
 # Create enough metadata for later balance
 for ((i = 0; i < $nr_files; i++)); do
diff --git a/tests/btrfs/193 b/tests/btrfs/193
index b4632ab0a..67220c7a5 100755
--- a/tests/btrfs/193
+++ b/tests/btrfs/193
@@ -26,7 +26,7 @@ _scratch_mkfs > /dev/null
 _scratch_mount
 
 $BTRFS_UTIL_PROG quota enable "$SCRATCH_MNT" > /dev/null
-$BTRFS_UTIL_PROG quota rescan -w "$SCRATCH_MNT" > /dev/null
+_qgroup_rescan "$SCRATCH_MNT" > /dev/null
 $BTRFS_UTIL_PROG qgroup limit -e 256M "$SCRATCH_MNT"
 
 # Create a file with the following layout:
diff --git a/tests/btrfs/210 b/tests/btrfs/210
index 383a307ff..f3d769fa0 100755
--- a/tests/btrfs/210
+++ b/tests/btrfs/210
@@ -29,7 +29,7 @@ _pwrite_byte 0xcd 0 16M "$SCRATCH_MNT/src/file" > /dev/null
 # by qgroup
 sync
 $BTRFS_UTIL_PROG quota enable "$SCRATCH_MNT"
-$BTRFS_UTIL_PROG quota rescan -w "$SCRATCH_MNT" > /dev/null
+_qgroup_rescan "$SCRATCH_MNT" > /dev/null
 $BTRFS_UTIL_PROG qgroup create 1/0 "$SCRATCH_MNT"
 
 # Create a snapshot with qgroup inherit
diff --git a/tests/btrfs/224 b/tests/btrfs/224
index d7ec57360..de10942fe 100755
--- a/tests/btrfs/224
+++ b/tests/btrfs/224
@@ -30,7 +30,7 @@ assign_shared_test()
 
 	echo "=== qgroup assign shared test ===" >> $seqres.full
 	$BTRFS_UTIL_PROG quota enable $SCRATCH_MNT
-	$BTRFS_UTIL_PROG quota rescan -w $SCRATCH_MNT >> $seqres.full
+	_qgroup_rescan $SCRATCH_MNT >> $seqres.full
 
 	$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a >> $seqres.full
 	$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/b >> $seqres.full
@@ -54,7 +54,7 @@ assign_no_shared_test()
 
 	echo "=== qgroup assign no shared test ===" >> $seqres.full
 	$BTRFS_UTIL_PROG quota enable $SCRATCH_MNT
-	$BTRFS_UTIL_PROG quota rescan -w $SCRATCH_MNT >> $seqres.full
+	_qgroup_rescan $SCRATCH_MNT >> $seqres.full
 
 	$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a >> $seqres.full
 	$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/b >> $seqres.full
@@ -75,7 +75,7 @@ snapshot_test()
 
 	echo "=== qgroup snapshot test ===" >> $seqres.full
 	$BTRFS_UTIL_PROG quota enable $SCRATCH_MNT
-	$BTRFS_UTIL_PROG quota rescan -w $SCRATCH_MNT >> $seqres.full
+	_qgroup_rescan $SCRATCH_MNT >> $seqres.full
 
 	$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a >> $seqres.full
 	_ddt of="$SCRATCH_MNT"/a/file1 bs=1M count=1 >> $seqres.full 2>&1
diff --git a/tests/btrfs/230 b/tests/btrfs/230
index 46b0c6369..7a4cd18e9 100755
--- a/tests/btrfs/230
+++ b/tests/btrfs/230
@@ -31,7 +31,7 @@ _pwrite_byte 0xcd 0 1G $SCRATCH_MNT/file >> $seqres.full
 sync
 
 $BTRFS_UTIL_PROG quota enable $SCRATCH_MNT
-$BTRFS_UTIL_PROG quota rescan -w $SCRATCH_MNT >> $seqres.full
+_qgroup_rescan $SCRATCH_MNT >> $seqres.full
 
 # Set the limit to just 512MiB, which is way below the existing usage
 $BTRFS_UTIL_PROG qgroup limit  512M 0/5 $SCRATCH_MNT
diff --git a/tests/btrfs/232 b/tests/btrfs/232
index 02c7e49de..debe070bb 100755
--- a/tests/btrfs/232
+++ b/tests/btrfs/232
@@ -46,7 +46,7 @@ _pwrite_byte 0xcd 0 900m $SCRATCH_MNT/file >> $seqres.full
 sync
 
 $BTRFS_UTIL_PROG quota enable $SCRATCH_MNT
-$BTRFS_UTIL_PROG quota rescan -w $SCRATCH_MNT >> $seqres.full
+_qgroup_rescan $SCRATCH_MNT >> $seqres.full
 # set the limit to 1 g, leaving us just 100mb of slack space
 $BTRFS_UTIL_PROG qgroup limit 1G 0/5 $SCRATCH_MNT
 
-- 
2.42.0

[PATCH v2 6/6] btrfs: skip squota incompatible tests

[Boris Burkov]

These tests cannot succeed if mkfs enable squotas, as they either test
the specifics of qgroups behavior or they test *enabling* squotas. Skip
these in squota mode.

Signed-off-by: Boris Burkov <boris@bur.io>
---
 tests/btrfs/017 | 1 +
 tests/btrfs/057 | 1 +
 tests/btrfs/091 | 3 ++-
 tests/btrfs/400 | 5 +++++
 4 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/tests/btrfs/017 b/tests/btrfs/017
index 622071018..496cc7df1 100755
--- a/tests/btrfs/017
+++ b/tests/btrfs/017
@@ -22,6 +22,7 @@ _begin_fstest auto quick qgroup
 
 _supported_fs btrfs
 _require_scratch
+_require_scratch_qgroup
 _require_cloner
 
 # Currently in btrfs the node/leaf size can not be smaller than the page
diff --git a/tests/btrfs/057 b/tests/btrfs/057
index 782d854a0..e932a6572 100755
--- a/tests/btrfs/057
+++ b/tests/btrfs/057
@@ -15,6 +15,7 @@ _begin_fstest auto quick
 # real QA test starts here
 _supported_fs btrfs
 _require_scratch
+_require_qgroup_rescan
 
 _scratch_mkfs_sized $((1024 * 1024 * 1024)) >> $seqres.full 2>&1
 
diff --git a/tests/btrfs/091 b/tests/btrfs/091
index f2cd00b2e..a71e03406 100755
--- a/tests/btrfs/091
+++ b/tests/btrfs/091
@@ -19,6 +19,7 @@ _begin_fstest auto quick qgroup
 _supported_fs btrfs
 _require_scratch
 _require_cp_reflink
+_require_scratch_qgroup
 
 # use largest node/leaf size (64K) to allow the test to be run on arch with
 # page size > 4k.
@@ -35,7 +36,7 @@ _run_btrfs_util_prog subvolume create $SCRATCH_MNT/subv2
 _run_btrfs_util_prog subvolume create $SCRATCH_MNT/subv3
 
 _run_btrfs_util_prog quota enable $SCRATCH_MNT
-_run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+_qgroup_rescan $SCRATCH_MNT
 
 $XFS_IO_PROG -f -c "pwrite 0 256K" $SCRATCH_MNT/subv1/file1 | _filter_xfs_io
 cp --reflink $SCRATCH_MNT/subv1/file1 $SCRATCH_MNT/subv2/file1
diff --git a/tests/btrfs/400 b/tests/btrfs/400
index a6d59ba5e..108d9602b 100755
--- a/tests/btrfs/400
+++ b/tests/btrfs/400
@@ -33,6 +33,11 @@ ext_sz=$((128 * m))
 limit_nr=8
 limit=$(($ext_sz * $limit_nr))
 
+_scratch_mkfs >> $seqres.full
+_scratch_mount
+_qgroup_mode $SCRATCH_MNT | grep 'squota' && _notrun "test relies on starting without simple quotas enabled"
+_scratch_unmount
+
 get_qgroup_usage()
 {
 	local qgroupid=$1
-- 
2.42.0