linux-btrfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Josef Bacik <josef@redhat.com>
To: Craig Johnson <crajohns@gmail.com>
Cc: linux-btrfs@vger.kernel.org
Subject: Re: parent transid verify failures on 2.6.39
Date: Wed, 25 May 2011 15:28:18 -0400	[thread overview]
Message-ID: <4DDD5852.3070501@redhat.com> (raw)
In-Reply-To: <BANLkTikbunJJTxutLGfs0R_rSfbqWmBf=A@mail.gmail.com>

On 05/25/2011 03:06 PM, Craig Johnson wrote:
> After doing an upgrade to 2.6.39 from 2.6.39-rc7, I am unable to mount
> my 3 disk btrfs volume.  It was a clean reboot, which makes it all the
> more puzzling.  This is what I'm getting:
> 
> 
> [68808.339109] device fsid a941511a96bcbfb8-8c123cb07aa6aaa1 devid 2
> transid 339584 /dev/sdc1
> [68808.340354] device fsid a941511a96bcbfb8-8c123cb07aa6aaa1 devid 1
> transid 339584 /dev/sda1
> [68808.340774] device fsid a941511a96bcbfb8-8c123cb07aa6aaa1 devid 3
> transid 339584 /dev/sdb1
> 
> [70106.913668] btrfs: disk space caching is enabled
> [70106.968648] parent transid verify failed on 6038227976192 wanted
> 337418 found 337853
> [70106.969031] parent transid verify failed on 6038227976192 wanted
> 337418 found 337853
> [70106.969403] parent transid verify failed on 6038227976192 wanted
> 337418 found 337853
> [70106.969671] parent transid verify failed on 6038227976192 wanted
> 337418 found 337853
> [70106.969691] parent transid verify failed on 6038227976192 wanted
> 337418 found 337853
> [70106.969704] Failed to read block groups: -5
> [70107.050658] btrfs: open_ctree failed
> 
> I went to run a btrfsck, but found out that I needed to compile with
> the tmp branch or I would get an unsupported features message (lzo and
> space_cache).  After compiling that, when I run btrfsck, I get this:
> 
> parent transid verify failed on 6038227976192 wanted 337418 found 337853
> parent transid verify failed on 6038227976192 wanted 337418 found 337853
> parent transid verify failed on 6038227976192 wanted 337418 found 337853
> 
> And then it stops.  This happens with btrfs-debug-tree, or
> btrfs-select-super.  I've tried it on sda1, sdb1, and sdc1 and also
> with -s 0, -s 1, and -s 2.  Dmesg shows a segfault:
> 
> [71775.589462] btrfsck[14453]: segfault at c4 ip 000000000040e477 sp
> 00007fffa9eb4d30 error 4 in btrfsck[400000+21000]
> 
> For fun, I ran it through gdb and I got this:
> 
> Program received signal SIGSEGV, Segmentation fault.
> find_first_block_group (root=0x61d1b0, path=0x61ef10, key=0x7fffffffe240)
>     at extent-tree.c:3028
> 3028                    if (slot >= btrfs_header_nritems(leaf)) {
> 
> 
> 
> Is there any hope of recovery here?  Not the end of the world if the
> volume is lost, but it would be a bit of a pain and I'm at a loss as
> to why it happened.  I tried mounting with the new integration-test
> branch just for fun, but there's no difference on the mounting.  Any
> help that could be provided would be immensely appreciated.  Thanks!
> 

So I have a patch I can give you that will possibly help you recover
your data if you don't have backups, or you can wait a couple of days
(hopefully) for the new btrfsck tool that will be much better than the
hack I can give you.  Thanks,

Josef

  reply	other threads:[~2011-05-25 19:28 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-25 19:06 parent transid verify failures on 2.6.39 Craig Johnson
2011-05-25 19:28 ` Josef Bacik [this message]
2011-05-25 19:32   ` Craig Johnson
2011-07-03  7:09     ` Skylar
  -- strict thread matches above, loose matches on Subject: below --
2011-06-22 22:42 Andrej Podzimek
2011-06-23  1:45 ` Chris Mason
2011-06-23 18:26   ` Daniel Witzel
2011-06-23 19:54   ` Josef Bacik
2011-06-23 21:11     ` Daniel Witzel
2011-06-23 21:35       ` Josef Bacik
2011-06-24 15:46         ` Daniel Witzel
2011-06-24  1:30     ` Andrej Podzimek
2011-06-28 15:46       ` Daniel Witzel
2011-06-28 16:44         ` Mitch Harder
2011-06-28 17:04           ` Daniel Witzel
2011-06-28 17:31           ` Daniel Witzel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DDD5852.3070501@redhat.com \
    --to=josef@redhat.com \
    --cc=crajohns@gmail.com \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).