* btrfs-transacti:1014 blocked for more than 120 seconds.
@ 2013-06-11 18:50 Michał Sawicz
0 siblings, 0 replies; 2+ messages in thread
From: Michał Sawicz @ 2013-06-11 18:50 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 919 bytes --]
Hey,
I've a 2x4TB RAID1 setup with btrfs on kernel 3.8.0. Under high I/O load
(BackupPC dump or writing a large file over gigabit) I get messages in
syslog such as the one mentioned in the subject.
The full non-logcheck-ignored log is under [1].
A BackupPC dump between the same exact machines onto a 2TB ext4 volume
take 90 minutes on average, the process on the btrfs volume took 465
minutes... BackupPC uses hard links for unchanged files between backups,
if that's relevant.
When copying a large file over gigabit, I'm getting around 50MB/s burst
speed for about 30s, followed by a minute of 0B/s when btrfs-submit and
btrfs-transaction are at 99% IO in iotop but minimal READ/WRITE.
Is there anything I can do to relieve that? If more details can help,
I'll gladly provide them.
[1] http://pastebin.ubuntu.com/5755800/
Thanks,
--
Michał (Saviq) Sawicz <michal@sawicz.net>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 899 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* btrfs-transacti:1014 blocked for more than 120 seconds.
@ 2013-06-11 18:42 Michał Sawicz
0 siblings, 0 replies; 2+ messages in thread
From: Michał Sawicz @ 2013-06-11 18:42 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 915 bytes --]
Hey,
I've a 2x4TB RAID1 setup with btrfs on kernel 3.8.0. Under high I/O load
(BackupPC dump or writing a large file over gigabit) I get messages in
syslog such as the one mentioned in the subject.
The full non-logcheck-ignored log is under [1].
A BackupPC dump between the same exact machines onto a 2TB ext4 volume
take 90 minutes on average, the process on the btrfs volume took 465
minutes... BackupPC uses hard links for unchanged files between backups,
if that's relevant.
When copying a large file over gigabit, I'm getting around 50MB/s burst
speed for about 30s, followed by a minute of 0B/s when btrfs-submit and
btrfs-transaction are at 99% IO in iotop but minimal READ/WRITE.
Is there anything I can do to relieve that? If more details can help,
I'll gladly provide them.
[1] http://pastebin.ubuntu.com/5755800/
Thanks,
--
Michał (Saviq) Sawicz <michal@sawicz.net>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 899 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-06-11 19:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-11 18:50 btrfs-transacti:1014 blocked for more than 120 seconds Michał Sawicz
-- strict thread matches above, loose matches on Subject: below --
2013-06-11 18:42 Michał Sawicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).