[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.3-gentoo-r1 (root@Echo-boom) (gcc version 4.8.1 (Gentoo 4.8.1 p1.0, pie-0.5.6) ) #8 SMP Thu Aug 1 00:31:34 IRDT 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.3-gentoo-r1 root=/dev/sda3 ro resume=/dev/sda2 acpi_backlight=vendor net.ifnames=0 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion g7 Notebook PC /1672, BIOS F.66 01/24/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x15fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 09D000000 mask FFF000000 uncachable [ 0.000000] 3 base 09E000000 mask FFE000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 140000000 mask FE0000000 write-back [ 0.000000] 7 base 15FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01ecd000, 0x01ecdfff] PGTABLE [ 0.000000] BRK [0x01ece000, 0x01ecefff] PGTABLE [ 0.000000] BRK [0x01ecf000, 0x01ecffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x15fc00000-0x15fdfffff] [ 0.000000] [mem 0x15fc00000-0x15fdfffff] page 2M [ 0.000000] BRK [0x01ed0000, 0x01ed0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fbfffff] [ 0.000000] [mem 0x15c000000-0x15fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff] [ 0.000000] [mem 0x100000000-0x15bffffff] page 2M [ 0.000000] BRK [0x01ed1000, 0x01ed1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9ce3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x9cdfffff] page 2M [ 0.000000] [mem 0x9ce00000-0x9ce3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff] [ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00084 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfec000 0C1FF (v01 HP 1672 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 00D52 (v01 HP 1672 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 0094E (v01 HP 1672 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1672 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1672 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15fdfffff] [ 0.000000] NODE_DATA [mem 0x15fdee000-0x15fdfcfff] [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b400000-ffff88015f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x15fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x9ce3efff] [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff] [ 0.000000] node 0: [mem 0x100000000-0x15fdfffff] [ 0.000000] On node 0 totalpages: 1035228 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9977 pages used for memmap [ 0.000000] DMA32 zone: 638528 pages, LIFO batch:31 [ 0.000000] Normal zone: 6136 pages used for memmap [ 0.000000] Normal zone: 392704 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000 [ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000 [ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000 [ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000 [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015fa00000 s84032 r8192 d22464 u262144 [ 0.000000] pcpu-alloc: s84032 r8192 d22464 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1018895 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.3-gentoo-r1 root=/dev/sda3 ro resume=/dev/sda2 acpi_backlight=vendor net.ifnames=0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3992428k/5765120k available (6719k kernel code, 1624208k absent, 148484k reserved, 6452k data, 984k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2195.028 MHz processor [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.05 BogoMIPS (lpj=2195028) [ 0.000204] pid_max: default: 32768 minimum: 301 [ 0.001048] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003623] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004793] Mount-cache hash table entries: 256 [ 0.005283] Initializing cgroup subsys freezer [ 0.005382] Initializing cgroup subsys bfqio [ 0.005528] CPU: Physical Processor ID: 0 [ 0.005623] CPU: Processor Core ID: 0 [ 0.005742] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.005901] mce: CPU supports 7 MCE banks [ 0.006015] CPU0: Thermal monitoring handled by SMI [ 0.006038] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.006549] Freeing SMP alternatives: 24k freed [ 0.010076] ACPI: Core revision 20130328 [ 0.025120] ACPI: All ACPI Tables successfully acquired [ 0.040791] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050917] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (fam: 06, model: 2a, stepping: 07) [ 0.051215] TSC deadline timer enabled [ 0.051236] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.051576] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.051719] ... version: 3 [ 0.051815] ... bit width: 48 [ 0.051911] ... generic registers: 4 [ 0.052006] ... value mask: 0000ffffffffffff [ 0.052106] ... max period: 000000007fffffff [ 0.052205] ... fixed-purpose events: 3 [ 0.052305] ... event mask: 000000070000000f [ 0.064355] CPU1: Thermal monitoring handled by SMI [ 0.077969] CPU2: Thermal monitoring handled by SMI [ 0.091546] CPU3: Thermal monitoring handled by SMI [ 0.052901] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.093657] Brought up 4 CPUs [ 0.093840] smpboot: Total of 4 processors activated (17560.22 BogoMIPS) [ 0.102590] devtmpfs: initialized [ 0.103165] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) [ 0.103554] kworker/u16:0 (26) used greatest stack depth: 5952 bytes left [ 0.103824] xor: automatically using best checksumming function: [ 0.113135] avx : 6064.000 MB/sec [ 0.113260] RTC time: 0:55:40, date: 08/05/13 [ 0.113449] NET: Registered protocol family 16 [ 0.114489] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.114633] ACPI: bus type PCI registered [ 0.114918] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.115067] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.169505] PCI: Using configuration type 1 for base access [ 0.185122] bio: create slab at 0 [ 0.201553] raid6: sse2x1 2144 MB/s [ 0.218592] raid6: sse2x2 2656 MB/s [ 0.235676] raid6: sse2x4 3085 MB/s [ 0.235772] raid6: using algorithm sse2x4 (3085 MB/s) [ 0.235872] raid6: using ssse3x2 recovery algorithm [ 0.236190] ACPI: Added _OSI(Module Device) [ 0.236289] ACPI: Added _OSI(Processor Device) [ 0.236386] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.236484] ACPI: Added _OSI(Processor Aggregator Device) [ 0.240345] ACPI: EC: Look up EC in DSDT [ 0.244027] ACPI: Executed 1 blocks of module-level executable AML code [ 0.256813] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.258001] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.259220] ACPI: Dynamic OEM Table Load: [ 0.259413] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.262359] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.263651] ACPI: Dynamic OEM Table Load: [ 0.263849] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.267058] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.268259] ACPI: Dynamic OEM Table Load: [ 0.268450] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.279731] ACPI: Interpreter enabled [ 0.279844] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.280103] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.280378] ACPI: (supports S0 S3 S4 S5) [ 0.280475] ACPI: Using IOAPIC for interrupt routing [ 0.280710] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.281096] ACPI: No dock devices found. [ 0.298845] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.299049] \_SB_.PCI0:_OSC invalid UUID [ 0.299053] _OSC request data:1 8 0 [ 0.300448] PCI host bridge to bus 0000:00 [ 0.300554] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.300656] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.300761] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.300864] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.300969] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.301092] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.301337] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.301420] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.301495] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.301732] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.301761] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.301777] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.301789] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] [ 0.302074] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.302125] pci 0000:00:16.0: reg 10: [mem 0xc3604000-0xc360400f 64bit] [ 0.302291] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.302516] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.302991] pci 0000:00:1a.0: reg 10: [mem 0xc3609000-0xc36093ff] [ 0.305578] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.305863] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.306114] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.306154] pci 0000:00:1b.0: reg 10: [mem 0xc3600000-0xc3603fff 64bit] [ 0.306335] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.306403] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.306629] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.306806] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.306878] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.307103] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.307280] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.307373] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.307598] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.307774] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.307852] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.308092] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.308555] pci 0000:00:1d.0: reg 10: [mem 0xc3608000-0xc36083ff] [ 0.311112] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.311380] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.311630] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.311975] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.312026] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f] [ 0.312047] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097] [ 0.312067] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087] [ 0.312087] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093] [ 0.312108] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] [ 0.312129] pci 0000:00:1f.2: reg 24: [mem 0xc3607000-0xc36077ff] [ 0.312250] pci 0000:00:1f.2: PME# supported from D3hot [ 0.312435] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.312474] pci 0000:00:1f.3: reg 10: [mem 0xc3605000-0xc36050ff 64bit] [ 0.312535] pci 0000:00:1f.3: reg 20: [io 0x5040-0x505f] [ 0.312910] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000 [ 0.312945] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.312972] pci 0000:01:00.0: reg 18: [mem 0xc2600000-0xc261ffff 64bit] [ 0.312991] pci 0000:01:00.0: reg 20: [io 0x4000-0x40ff] [ 0.313025] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.313105] pci 0000:01:00.0: supports D1 D2 [ 0.313149] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.314528] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.314632] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.314639] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff] [ 0.314648] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.314880] pci 0000:02:00.0: [1814:5390] type 00 class 0x028000 [ 0.314941] pci 0000:02:00.0: reg 10: [mem 0xc2500000-0xc250ffff] [ 0.316564] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.316676] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff] [ 0.316894] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000 [ 0.316930] pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff] [ 0.316989] pci 0000:03:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.317026] pci 0000:03:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.317177] pci 0000:03:00.0: supports D1 D2 [ 0.317182] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317284] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.319565] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.319671] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.319690] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.319909] pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.319946] pci 0000:04:00.0: reg 10: [mem 0xc1500000-0xc1500fff] [ 0.320185] pci 0000:04:00.0: supports D1 D2 [ 0.320189] pci 0000:04:00.0: PME# supported from D1 D2 D3hot [ 0.321574] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.321681] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.321691] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff] [ 0.321704] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.321859] \_SB_.PCI0:_OSC invalid UUID [ 0.321863] _OSC request data:1 1f 0 [ 0.321873] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.322016] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.323197] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.324018] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.324821] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.325623] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.326416] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.327353] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.328286] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.329084] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.330632] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.330861] acpi root: \_SB_.PCI0 notify handler is installed [ 0.330969] Found 1 acpi root devices [ 0.331078] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.331459] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.331612] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.331756] vgaarb: loaded [ 0.331855] vgaarb: bridge control possible 0000:01:00.0 [ 0.331955] vgaarb: no bridge control possible 0000:00:02.0 [ 0.332360] SCSI subsystem initialized [ 0.332460] ACPI: bus type ATA registered [ 0.332810] libata version 3.00 loaded. [ 0.332893] ACPI: bus type USB registered [ 0.333136] usbcore: registered new interface driver usbfs [ 0.333305] usbcore: registered new interface driver hub [ 0.333507] usbcore: registered new device driver usb [ 0.334076] PCI: Using ACPI for IRQ routing [ 0.351388] PCI: pci_cache_line_size set to 64 bytes [ 0.351518] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.351523] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff] [ 0.351527] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.351532] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff] [ 0.352187] cfg80211: Calling CRDA to update world regulatory domain [ 0.352829] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.353373] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.355500] Switching to clocksource hpet [ 0.370770] pnp: PnP ACPI init [ 0.370882] ACPI: bus type PNP registered [ 0.371339] pnp 00:00: [dma 4] [ 0.371455] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.371579] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.371943] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.372078] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.372255] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.372361] system 00:04: [io 0x1004-0x1013] has been reserved [ 0.372465] system 00:04: [io 0xffff] has been reserved [ 0.372567] system 00:04: [io 0xffff] has been reserved [ 0.372690] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.372793] system 00:04: [io 0x0454-0x0457] has been reserved [ 0.372896] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.372998] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.373101] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.373203] system 00:04: [io 0x0380-0x0387] has been reserved [ 0.373308] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.373440] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.373594] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.373770] pnp 00:07: Plug and Play ACPI device, IDs SYN1e40 SYN1e00 SYN0002 PNP0f13 (active) [ 0.374196] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.374304] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.374407] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.374513] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.374618] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.374743] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.374849] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.374954] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 0.375061] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.375167] system 00:08: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.375273] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.375950] system 00:09: [mem 0x20000000-0x201fffff] could not be reserved [ 0.376058] system 00:09: [mem 0x40000000-0x401fffff] could not be reserved [ 0.376165] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.376211] pnp: PnP ACPI: found 10 devices [ 0.376307] ACPI: bus type PNP unregistered [ 0.381126] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.381338] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2620000-0xc263ffff pref] [ 0.381482] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.381582] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.381706] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff] [ 0.381813] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.381961] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.382068] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff] [ 0.382186] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.382288] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.382402] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.382554] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.382667] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.382777] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff] [ 0.382887] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.383691] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.383698] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.383703] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.383708] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.383713] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.383718] pci_bus 0000:01: resource 1 [mem 0xc2600000-0xc35fffff] [ 0.383723] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 0.383728] pci_bus 0000:02: resource 1 [mem 0xc2500000-0xc25fffff] [ 0.383733] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.383738] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.383743] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.383748] pci_bus 0000:04: resource 1 [mem 0xc1500000-0xc24fffff] [ 0.383753] pci_bus 0000:04: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.383812] NET: Registered protocol family 2 [ 0.384281] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.384734] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.385013] TCP: Hash tables configured (established 32768 bind 32768) [ 0.385162] TCP: reno registered [ 0.385271] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.385419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.385686] NET: Registered protocol family 1 [ 0.385812] pci 0000:00:02.0: Boot video device [ 0.386011] pci 0000:00:1a.0: EHCI: BIOS handoff [ 0.397040] pci 0000:00:1d.0: EHCI: BIOS handoff [ 0.407896] PCI: CLS 64 bytes, default 64 [ 0.407923] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.408030] software IO TLB [mem 0x98e3f000-0x9ce3f000] (64MB) mapped at [ffff880098e3f000-ffff88009ce3efff] [ 0.408263] Simple Boot Flag at 0x44 set to 0x1 [ 0.409979] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 0.410095] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 0.410215] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 0.410338] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 0.410557] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.410725] Scanning for low memory corruption every 60 seconds [ 0.455031] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.462097] VFS: Disk quotas dquot_6.5.2 [ 0.462363] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.463845] bio: create slab at 1 [ 0.464593] Btrfs loaded [ 0.464694] msgmni has been set to 7797 [ 0.465815] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.465958] io scheduler noop registered [ 0.466054] io scheduler deadline registered [ 0.466269] io scheduler cfq registered [ 0.466479] io scheduler bfq registered (default) [ 0.466809] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.467376] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.467602] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.469334] Non-volatile memory driver v1.3 [ 0.469434] Linux agpgart interface v0.103 [ 0.470462] ACPI: AC Adapter [ACAD] (on-line) [ 0.471032] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.471456] ACPI: Lid Switch [LID0] [ 0.471689] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.471864] ACPI: Power Button [PWRB] [ 0.472112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.472857] ACPI: Power Button [PWRF] [ 0.473245] ACPI: Requesting acpi_cpufreq [ 0.474121] Monitor-Mwait will be used to enter C-1 state [ 0.474134] Monitor-Mwait will be used to enter C-2 state [ 0.474145] ACPI: acpi_idle registered with cpuidle [ 0.481272] [Firmware Bug]: Invalid critical threshold (0) [ 0.483118] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.483223] ACPI: Thermal Zone [TZ01] (81 C) [ 0.483591] [drm] Initialized drm 1.1.0 20060810 [ 0.485774] [drm] Memory usable by graphics device = 2048M [ 0.485887] i915 0000:00:02.0: setting latency timer to 64 [ 0.545242] ACPI: Battery Slot [BAT0] (battery present) [ 0.545993] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 0.546012] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.546116] [drm] Driver supports precise vblank timestamp query. [ 0.548595] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 0.548743] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 0.576500] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 0.576604] [drm] This can cause pipe underruns and display issues. [ 0.576706] [drm] Please upgrade your BIOS to fix this. [ 0.590931] fbcon: inteldrmfb (fb0) is primary device [ 1.347703] Console: switching to colour frame buffer device 200x56 [ 1.357831] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.357905] i915 0000:00:02.0: registered panic notifier [ 1.358645] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.358911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input3 [ 1.365335] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.365586] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 1.365797] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.368454] loop: module loaded [ 1.369021] ahci 0000:00:1f.2: version 3.0 [ 1.369288] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.379732] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode [ 1.379833] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.379930] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.383493] scsi0 : ahci [ 1.383809] scsi1 : ahci [ 1.384079] scsi2 : ahci [ 1.384360] scsi3 : ahci [ 1.384638] scsi4 : ahci [ 1.384928] scsi5 : ahci [ 1.385193] ata1: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607100 irq 42 [ 1.385282] ata2: DUMMY [ 1.385315] ata3: DUMMY [ 1.385349] ata4: DUMMY [ 1.385384] ata5: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607300 irq 42 [ 1.385469] ata6: DUMMY [ 1.386209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.386291] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 1.386298] ehci-pci: EHCI PCI platform driver [ 1.386565] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1.386582] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.386799] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.386909] ehci-pci 0000:00:1a.0: debug port 2 [ 1.386972] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 1.386979] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 1.387026] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.390910] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.390915] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 1.390945] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc3609000 [ 1.391020] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.396731] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.396835] usb usb1: default language 0x0409 [ 1.396849] usb usb1: udev 1, busnum 1, minor = 0 [ 1.396855] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.398796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.400776] usb usb1: Product: EHCI Host Controller [ 1.402770] usb usb1: Manufacturer: Linux 3.10.3-gentoo-r1 ehci_hcd [ 1.404834] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.407154] usb usb1: usb_probe_device [ 1.407162] usb usb1: configuration #1 chosen from 1 choice [ 1.407178] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.407290] hub 1-0:1.0: usb_probe_interface [ 1.407296] hub 1-0:1.0: usb_probe_interface - got id [ 1.407300] hub 1-0:1.0: USB hub found [ 1.409469] hub 1-0:1.0: 2 ports detected [ 1.411623] hub 1-0:1.0: standalone hub [ 1.411627] hub 1-0:1.0: no power switching (usb 1.0) [ 1.411631] hub 1-0:1.0: individual port over-current protection [ 1.411636] hub 1-0:1.0: power on to power good time: 20ms [ 1.411645] hub 1-0:1.0: local power source is good [ 1.411714] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 1.411731] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.411743] tsc: Refined TSC clocksource calibration: 2195.012 MHz [ 1.411991] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1.412003] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.412197] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.412219] ehci-pci 0000:00:1d.0: debug port 2 [ 1.412227] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 1.412233] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 1.412258] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.416146] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.416148] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 1.416178] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc3608000 [ 1.416185] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.421754] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.421783] usb usb2: default language 0x0409 [ 1.421794] usb usb2: udev 1, busnum 2, minor = 128 [ 1.421798] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.421801] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.421804] usb usb2: Product: EHCI Host Controller [ 1.421808] usb usb2: Manufacturer: Linux 3.10.3-gentoo-r1 ehci_hcd [ 1.421810] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.422042] usb usb2: usb_probe_device [ 1.422046] usb usb2: configuration #1 chosen from 1 choice [ 1.422058] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.422176] hub 2-0:1.0: usb_probe_interface [ 1.422179] hub 2-0:1.0: usb_probe_interface - got id [ 1.422182] hub 2-0:1.0: USB hub found [ 1.422189] hub 2-0:1.0: 2 ports detected [ 1.422191] hub 2-0:1.0: standalone hub [ 1.422193] hub 2-0:1.0: no power switching (usb 1.0) [ 1.422195] hub 2-0:1.0: individual port over-current protection [ 1.422198] hub 2-0:1.0: power on to power good time: 20ms [ 1.422204] hub 2-0:1.0: local power source is good [ 1.422262] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 1.422265] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.422417] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.422419] ohci_hcd: block sizes: ed 80 td 96 [ 1.422517] uhci_hcd: USB Universal Host Controller Interface driver [ 1.422747] usbcore: registered new interface driver usblp [ 1.422859] usbcore: registered new interface driver usb-storage [ 1.423073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.433509] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.433518] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.433924] mousedev: PS/2 mouse device common for all mice [ 1.434866] rtc_cmos 00:05: RTC can wake from S4 [ 1.435146] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.435188] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.435474] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251) [ 1.435476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.436397] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 1.436568] cpuidle: using governor ladder [ 1.487922] hpet1: lost 2 rtc interrupts [ 1.488008] cpuidle: using governor menu [ 1.488345] hidraw: raw HID events driver (C) Jiri Kosina [ 1.490532] usbcore: registered new interface driver usbhid [ 1.490533] usbhid: USB HID core driver [ 1.491133] Netfilter messages via NETLINK v0.30. [ 1.491161] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.491444] ctnetlink v0.93: registering with nfnetlink. [ 1.523339] Switching to clocksource tsc [ 1.523353] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.527978] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.528037] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.528058] hub 2-0:1.0: port 1: status 0501 change 0001 [ 1.528174] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.531432] TCP: cubic registered [ 1.534534] Initializing XFRM netlink socket [ 1.537928] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.538402] NET: Registered protocol family 10 [ 1.539197] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.552455] sit: IPv6 over IPv4 tunneling driver [ 1.556130] NET: Registered protocol family 17 [ 1.559242] Key type dns_resolver registered [ 1.563536] PM: Checking hibernation image partition /dev/sda2 [ 1.628035] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.628057] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.679349] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 1.679363] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.690082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.693257] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.696578] ata1.00: ATA-8: WDC WD5000BPVT-60HXZT1, 01.01A01, max UDMA/133 [ 1.699698] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.705189] ata1.00: configured for UDMA/133 [ 1.708671] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-6 01.0 PQ: 0 ANSI: 5 [ 1.708797] ata5.00: ATAPI: hp DVD-RAM UJ8B1, H.02, max UDMA/100 [ 1.715992] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.716318] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.722535] ata5.00: configured for UDMA/100 [ 1.723825] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8B1 H.02 PQ: 0 ANSI: 5 [ 1.727619] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.727622] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.728142] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.728526] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.730110] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.737283] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 1.746114] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.749555] sd 0:0:0:0: [sda] Write Protect is off [ 1.752866] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.752912] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.781332] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 1.781347] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.794259] sda: sda1 sda2 sda3 [ 1.798881] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.845004] usb 1-1: udev 2, busnum 1, minor = 1 [ 1.845015] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.848435] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.852319] usb 1-1: usb_probe_device [ 1.852331] usb 1-1: configuration #1 chosen from 1 choice [ 1.852500] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 1.852813] hub 1-1:1.0: usb_probe_interface [ 1.852823] hub 1-1:1.0: usb_probe_interface - got id [ 1.852828] hub 1-1:1.0: USB hub found [ 1.856427] hub 1-1:1.0: 6 ports detected [ 1.859813] hub 1-1:1.0: standalone hub [ 1.859817] hub 1-1:1.0: individual port power switching [ 1.859821] hub 1-1:1.0: individual port over-current protection [ 1.859825] hub 1-1:1.0: Single TT [ 1.859830] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.859834] hub 1-1:1.0: power on to power good time: 100ms [ 1.860078] hub 1-1:1.0: local power source is good [ 1.860318] usb 1-1: usb port3's DeviceRemovable is changed to 1 according to platform information. [ 1.860325] usb 1-1: usb port5's DeviceRemovable is changed to 1 according to platform information. [ 1.860330] usb 1-1: usb port6's DeviceRemovable is changed to 1 according to platform information. [ 1.860335] hub 1-1:1.0: enabling power on all ports [ 1.861132] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.861148] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.911592] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.911606] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.961115] usb 1-1: link qh256-0001/ffff88015a638d00 start 1 [1/0 us] [ 1.962360] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.016699] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 2.016714] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.080243] usb 2-1: udev 2, busnum 2, minor = 129 [ 2.080253] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.083701] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.087556] usb 2-1: usb_probe_device [ 2.087568] usb 2-1: configuration #1 chosen from 1 choice [ 2.087736] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 2.088049] hub 2-1:1.0: usb_probe_interface [ 2.088058] hub 2-1:1.0: usb_probe_interface - got id [ 2.088064] hub 2-1:1.0: USB hub found [ 2.091668] hub 2-1:1.0: 6 ports detected [ 2.095087] hub 2-1:1.0: standalone hub [ 2.095092] hub 2-1:1.0: individual port power switching [ 2.095096] hub 2-1:1.0: individual port over-current protection [ 2.095100] hub 2-1:1.0: Single TT [ 2.095104] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.095108] hub 2-1:1.0: power on to power good time: 100ms [ 2.095363] hub 2-1:1.0: local power source is good [ 2.095536] usb 2-1: usb port5's DeviceRemovable is changed to 1 according to platform information. [ 2.095542] hub 2-1:1.0: enabling power on all ports [ 2.096356] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 2.196208] hub 2-1:1.0: port 5: status 0101 change 0001 [ 2.295719] usb 2-1: link qh256-0001/ffff88015a7f4480 start 1 [1/0 us] [ 2.295796] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.295951] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.306799] hub 2-1:1.0: port 5 not reset yet, waiting 10ms [ 2.368864] usb 2-1.5: new high-speed USB device number 3 using ehci-pci [ 2.385056] hub 2-1:1.0: port 5 not reset yet, waiting 10ms [ 2.499892] usb 2-1.5: skipped 1 descriptor after configuration [ 2.499902] usb 2-1.5: skipped 5 descriptors after interface [ 2.499908] usb 2-1.5: skipped 1 descriptor after endpoint [ 2.499913] usb 2-1.5: skipped 7 descriptors after interface [ 2.500926] usb 2-1.5: default language 0x0409 [ 2.506181] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.506192] usb 2-1.5: New USB device found, idVendor=0c45, idProduct=6321 [ 2.509669] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.513106] usb 2-1.5: Product: HP Webcam-101 [ 2.516441] usb 2-1.5: Manufacturer: DC01901LO0XN3F [ 2.520093] usb 2-1.5: usb_probe_device [ 2.520104] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.520575] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.522940] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1678, fw id: 706628 [ 2.523541] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.526216] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.576654] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.584209] PM: Hibernation image partition 8:2 present [ 2.584217] PM: Looking for hibernation image. [ 2.584684] PM: Image not found (code -22) [ 2.584691] PM: Hibernation image not present or could not be loaded. [ 2.584721] registered taskstats version 1 [ 2.588966] Magic number: 9:274:910 [ 2.592620] md: Waiting for all devices to be available before autodetect [ 2.596070] md: If you don't use raid, use raid=noautodetect [ 2.600028] md: Autodetecting RAID arrays. [ 2.603444] md: Scanned 0 and added 0 devices. [ 2.606834] md: autorun ... [ 2.610183] md: ... autorun DONE. [ 2.647984] device fsid e31cf52a-b1f0-4b8b-9089-6e7422cccb4c devid 1 transid 46545 /dev/sda3 [ 2.652843] btrfs: disk space caching is enabled [ 6.182469] VFS: Mounted root (btrfs filesystem) readonly on device 0:13. [ 6.187184] Freeing unused kernel memory: 984k freed [ 6.190928] Write protecting the kernel read-only data: 12288k [ 6.203179] Freeing unused kernel memory: 1460k freed [ 6.217627] Freeing unused kernel memory: 1984k freed [ 7.475913] kbd_mode (925) used greatest stack depth: 4600 bytes left [ 7.535352] init-early.sh (924) used greatest stack depth: 4272 bytes left [ 11.400751] dmesg (1124) used greatest stack depth: 3744 bytes left [ 11.871169] systemd-udevd[1200]: starting version 206 [ 13.738590] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 14.225699] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 14.228024] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected [ 14.228189] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 15.088284] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 15.088294] Disabling lock debugging due to kernel taint [ 15.107927] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3742 MBytes. [ 15.108372] <6>[fglrx] vendor: 1002 device: 6760 count: 1 [ 15.108915] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100 [ 15.108935] pci 0000:01:00.0: enabling device (0000 -> 0003) [ 15.109280] <6>[fglrx] Kernel PAT support is enabled [ 15.109328] <6>[fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors [ 15.757165] device fsid e31cf52a-b1f0-4b8b-9089-6e7422cccb4c devid 1 transid 46545 /dev/sda3 [ 15.810590] Linux video capture interface: v2.00 [ 15.850391] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 15.850738] r8169 0000:03:00.0: irq 44 for MSI/MSI-X [ 15.851068] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc90010a7e000, 10:1f:74:c3:dd:33, XID 00a00000 IRQ 44 [ 15.956974] uvcvideo 2-1.5:1.0: usb_probe_interface [ 15.956986] uvcvideo 2-1.5:1.0: usb_probe_interface - got id [ 15.957025] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0c45:6321) [ 15.970899] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7 [ 15.971060] usbcore: registered new interface driver uvcvideo [ 15.971065] USB Video Class driver (1.1.1) [ 16.389583] usb 2-1.5: link qh4-0001/ffff880157818680 start 2 [1/0 us] [ 16.389676] usb 2-1.5: unlink qh4-0001/ffff880157818680 start 2 [1/0 us] [ 17.413167] Adding 5242876k swap on /dev/sda2. Priority:-1 extents:1 across:5242876k [ 17.572045] btrfs: disk space caching is enabled [ 22.819984] NetworkManager (1788) used greatest stack depth: 3600 bytes left [ 24.668291] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 24.738087] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 24.763987] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.124545] r8169 0000:03:00.0 eth0: link down [ 25.124562] r8169 0000:03:00.0 eth0: link down [ 25.124579] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.694997] r8169 0000:03:00.0 eth0: link up [ 26.695014] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 28.872663] fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X [ 28.873139] <6>[fglrx] Firegl kernel thread PID: 1934 [ 28.873222] <6>[fglrx] Firegl kernel thread PID: 1935 [ 28.873304] <6>[fglrx] Firegl kernel thread PID: 1936 [ 28.873428] <6>[fglrx] IRQ 45 Enabled [ 28.921700] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 28.921703] <6>[fglrx] Reserved FB block: Unshared offset:f8b2000, size:44e000 [ 28.921705] <6>[fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000 [ 41.999931] BTRFS error (device sda3): trying to drop 2 refs but we only have 1 for bytenr 11723980800 [ 41.999935] ------------[ cut here ]------------ [ 41.999941] WARNING: at fs/btrfs/super.c:254 __btrfs_abort_transaction+0xcd/0xe0() [ 41.999942] btrfs: Transaction aborted (error -22) [ 41.999943] Modules linked in: kvm_intel kvm uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core r8169 mii videodev fglrx(PO) snd_hda_codec_hdmi snd_hda_codec_idt rt2800pci eeprom_93cx6 rt2x00pci rt2800lib crc_ccitt rt2x00mmio rt2x00lib snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore [ 41.999963] CPU: 2 PID: 919 Comm: btrfs-cleaner Tainted: P O 3.10.3-gentoo-r1 #8 [ 41.999965] Hardware name: Hewlett-Packard HP Pavilion g7 Notebook PC /1672, BIOS F.66 01/24/2013 [ 41.999966] 0000000000000009 ffff88015992ba70 ffffffff8167ca26 ffff88015992baa8 [ 41.999969] ffffffff8103a6ac 00000000ffffffea ffff8801597ae280 ffff88015a0cf000 [ 41.999971] ffffffff81827ba0 00000000000015be ffff88015992bb08 ffffffff8103a717 [ 41.999974] Call Trace: [ 41.999980] [] dump_stack+0x19/0x1b [ 41.999983] [] warn_slowpath_common+0x5c/0x80 [ 41.999985] [] warn_slowpath_fmt+0x47/0x50 [ 41.999987] [] __btrfs_abort_transaction+0xcd/0xe0 [ 41.999991] [] __btrfs_free_extent+0x6dd/0xa00 [ 41.999994] [] run_clustered_refs+0x372/0xdd0 [ 41.999998] [] ? btrfs_add_delayed_tree_ref+0x10c/0x150 [ 42.000002] [] btrfs_run_delayed_refs+0xd0/0x4f0 [ 42.000005] [] ? walk_up_tree+0xc0/0x1f0 [ 42.000009] [] ? read_extent_buffer+0xb4/0x110 [ 42.000012] [] btrfs_should_end_transaction+0x3d/0x70 [ 42.000015] [] btrfs_drop_snapshot+0x38a/0x660 [ 42.000018] [] btrfs_clean_one_deleted_snapshot+0xdc/0x130 [ 42.000020] [] cleaner_kthread+0x130/0x170 [ 42.000023] [] ? btrfs_cleanup_transaction+0x4b0/0x4b0 [ 42.000026] [] kthread+0xbb/0xc0 [ 42.000028] [] ? kthread_create_on_node+0x110/0x110 [ 42.000032] [] ret_from_fork+0x7c/0xb0 [ 42.000034] [] ? kthread_create_on_node+0x110/0x110 [ 42.000036] ---[ end trace 61e1bcd93de9360c ]--- [ 42.000038] BTRFS error (device sda3) in __btrfs_free_extent:5566: errno=-22 unknown [ 42.000040] BTRFS info (device sda3): forced readonly [ 42.000042] BTRFS debug (device sda3): run_one_delayed_ref returned -22 [ 42.000044] BTRFS error (device sda3) in btrfs_run_delayed_refs:2630: errno=-22 unknown [ 61.979004] r8169 0000:03:00.0 eth0: link down [ 111.914767] r8169 0000:03:00.0 eth0: link up [ 142.338517] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0002 [ 142.338794] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 142.443184] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 142.454180] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 142.516260] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 142.584327] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 142.708009] usb 1-1.1: default language 0x0409 [ 142.709140] usb 1-1.1: udev 3, busnum 1, minor = 2 [ 142.709151] usb 1-1.1: New USB device found, idVendor=054c, idProduct=02a5 [ 142.709156] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 142.709161] usb 1-1.1: Product: Storage Media [ 142.709166] usb 1-1.1: Manufacturer: Sony [ 142.709170] usb 1-1.1: SerialNumber: 9B3001202290004637 [ 142.709301] usb 1-1.1: usb_probe_device [ 142.709304] usb 1-1.1: configuration #1 chosen from 1 choice [ 142.709429] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 142.709474] usb-storage 1-1.1:1.0: usb_probe_interface [ 142.709482] usb-storage 1-1.1:1.0: usb_probe_interface - got id [ 142.709485] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 142.709544] scsi6 : usb-storage 1-1.1:1.0 [ 142.709606] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0002 [ 144.133709] scsi 6:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS [ 144.133850] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 144.134442] sd 6:0:0:0: [sdb] 15624192 512-byte logical blocks: (7.99 GB/7.45 GiB) [ 144.135286] sd 6:0:0:0: [sdb] Write Protect is off [ 144.135289] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 144.136056] sd 6:0:0:0: [sdb] No Caching mode page present [ 144.136063] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 144.140000] sd 6:0:0:0: [sdb] No Caching mode page present [ 144.140008] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 144.141720] sdb: sdb1 [ 144.145428] sd 6:0:0:0: [sdb] No Caching mode page present [ 144.145436] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 144.147080] sd 6:0:0:0: [sdb] Attached SCSI removable disk