* [PATCH] xfstests: btrfs/003: regression test for subvol delete V2
@ 2013-08-13 19:34 Josef Bacik
2013-08-13 19:38 ` Eric Sandeen
0 siblings, 1 reply; 4+ messages in thread
From: Josef Bacik @ 2013-08-13 19:34 UTC (permalink / raw)
To: linux-btrfs, xfs
We were allowing users to delete their default subvolume, which is problematic.
This test is a regression test to make sure we don't let that happen in the
future. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
---
V1->V2: address the comments made by Eric Sandeen.
tests/btrfs/003 | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/003.out | 2 +
tests/btrfs/group | 1 +
3 files changed, 69 insertions(+), 0 deletions(-)
create mode 100755 tests/btrfs/003
create mode 100644 tests/btrfs/003.out
diff --git a/tests/btrfs/003 b/tests/btrfs/003
new file mode 100755
index 0000000..aba883d
--- /dev/null
+++ b/tests/btrfs/003
@@ -0,0 +1,66 @@
+#! /bin/bash
+# FS QA Test No. btrfs/003
+#
+# Regression test to make sure we can't delete the default subvol
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013 Fusion IO. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+
+status=1 # failure is the default!
+
+_cleanup()
+{
+ rm -f $tmp.*
+}
+
+trap "_cleanup ; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+
+_scratch_mkfs > /dev/null 2>&1
+_scratch_mount
+
+# This will be set to subvolid 256. If this ever changes in the future for
+# whatever reason we'll have to pull the subvolid out of the subvol list command
+# but since it's a newly mkfs'ed fs we should be fine with this.
+$BTRFS_UTIL_PROG sub create $SCRATCH_MNT/newvol >> $seqres.full 2>&1 \
+ || _fail "couldn't create subvol"
+subvolid=$($BTRFS_UTIL_PROG sub list $SCRATCH_MNT | grep newvol | awk '{ print $2 }')
+$BTRFS_UTIL_PROG sub set-default $subvolid $SCRATCH_MNT >> $seqres.full 2>&1 \
+ || _fail "couldn't set default"
+$BTRFS_UTIL_PROG sub delete $SCRATCH_MNT/newvol >> $seqres.full 2>&1
+_scratch_unmount
+_scratch_mount || _fail "mount should have succeeded"
+
+echo "Silence is golden"
+status=0 ; exit
diff --git a/tests/btrfs/003.out b/tests/btrfs/003.out
new file mode 100644
index 0000000..6895fc8
--- /dev/null
+++ b/tests/btrfs/003.out
@@ -0,0 +1,2 @@
+QA output created by 003
+Silence is golden
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 5b65068..86f5a5a 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -5,6 +5,7 @@
#
001 auto quick
002 auto quick
+003 auto quick
254 auto quick
264 auto
265 auto
--
1.7.7.6
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] xfstests: btrfs/003: regression test for subvol delete V2
2013-08-13 19:34 [PATCH] xfstests: btrfs/003: regression test for subvol delete V2 Josef Bacik
@ 2013-08-13 19:38 ` Eric Sandeen
2013-08-29 13:21 ` David Sterba
0 siblings, 1 reply; 4+ messages in thread
From: Eric Sandeen @ 2013-08-13 19:38 UTC (permalink / raw)
To: Josef Bacik; +Cc: linux-btrfs, xfs
On 8/13/13 2:34 PM, Josef Bacik wrote:
> We were allowing users to delete their default subvolume, which is problematic.
> This test is a regression test to make sure we don't let that happen in the
> future. Thanks,
>
> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
> ---
> V1->V2: address the comments made by Eric Sandeen.
>
> tests/btrfs/003 | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/003.out | 2 +
> tests/btrfs/group | 1 +
> 3 files changed, 69 insertions(+), 0 deletions(-)
> create mode 100755 tests/btrfs/003
> create mode 100644 tests/btrfs/003.out
>
> diff --git a/tests/btrfs/003 b/tests/btrfs/003
> new file mode 100755
> index 0000000..aba883d
> --- /dev/null
> +++ b/tests/btrfs/003
> @@ -0,0 +1,66 @@
> +#! /bin/bash
> +# FS QA Test No. btrfs/003
> +#
> +# Regression test to make sure we can't delete the default subvol
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2013 Fusion IO. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +
> +status=1 # failure is the default!
> +
> +_cleanup()
> +{
> + rm -f $tmp.*
> +}
> +
> +trap "_cleanup ; exit \$status" 0 1 2 3 15
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +
> +_scratch_mkfs > /dev/null 2>&1
> +_scratch_mount
> +
> +# This will be set to subvolid 256. If this ever changes in the future for
> +# whatever reason we'll have to pull the subvolid out of the subvol list command
> +# but since it's a newly mkfs'ed fs we should be fine with this.
. . . and then you grab it out of the subvol list command anyway ;)
So really this comment should go, and it sure would be nice to have
a btrfs_get_subvolid() helper for future generations...
-Eric
> +$BTRFS_UTIL_PROG sub create $SCRATCH_MNT/newvol >> $seqres.full 2>&1 \
> + || _fail "couldn't create subvol"
> +subvolid=$($BTRFS_UTIL_PROG sub list $SCRATCH_MNT | grep newvol | awk '{ print $2 }')
> +$BTRFS_UTIL_PROG sub set-default $subvolid $SCRATCH_MNT >> $seqres.full 2>&1 \
> + || _fail "couldn't set default"
> +$BTRFS_UTIL_PROG sub delete $SCRATCH_MNT/newvol >> $seqres.full 2>&1
> +_scratch_unmount
> +_scratch_mount || _fail "mount should have succeeded"
> +
> +echo "Silence is golden"
> +status=0 ; exit
> diff --git a/tests/btrfs/003.out b/tests/btrfs/003.out
> new file mode 100644
> index 0000000..6895fc8
> --- /dev/null
> +++ b/tests/btrfs/003.out
> @@ -0,0 +1,2 @@
> +QA output created by 003
> +Silence is golden
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 5b65068..86f5a5a 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -5,6 +5,7 @@
> #
> 001 auto quick
> 002 auto quick
> +003 auto quick
> 254 auto quick
> 264 auto
> 265 auto
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] xfstests: btrfs/003: regression test for subvol delete V2
2013-08-13 19:38 ` Eric Sandeen
@ 2013-08-29 13:21 ` David Sterba
2013-08-29 16:14 ` Eric Sandeen
0 siblings, 1 reply; 4+ messages in thread
From: David Sterba @ 2013-08-29 13:21 UTC (permalink / raw)
To: Eric Sandeen; +Cc: Josef Bacik, linux-btrfs, xfs
On Tue, Aug 13, 2013 at 02:38:05PM -0500, Eric Sandeen wrote:
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# real QA test starts here
> > +_supported_fs btrfs
> > +_supported_os Linux
> > +_require_scratch
> > +
> > +_scratch_mkfs > /dev/null 2>&1
> > +_scratch_mount
> > +
> > +# This will be set to subvolid 256. If this ever changes in the future for
> > +# whatever reason we'll have to pull the subvolid out of the subvol list command
> > +# but since it's a newly mkfs'ed fs we should be fine with this.
>
> . . . and then you grab it out of the subvol list command anyway ;)
>
> So really this comment should go, and it sure would be nice to have
> a btrfs_get_subvolid() helper for future generations...
This is available in the 'btrfs subvol show /subvol':
# btrfs subvol show subv1
/mnt/a15/subv1
Name: subv1
uuid: cf010ad0-38bf-7a42-88be-3360f68cd335
Parent uuid: e6543f70-5d38-1845-b976-d18095860bdf
Creation time: 2013-08-29 15:18:18
Object ID: 258
Generation (Gen): 6
Gen at creation: 6
Parent: 5
Top Level: 5
Flags: readonly
Snapshot(s):
Though it involves grep as well.
david
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] xfstests: btrfs/003: regression test for subvol delete V2
2013-08-29 13:21 ` David Sterba
@ 2013-08-29 16:14 ` Eric Sandeen
0 siblings, 0 replies; 4+ messages in thread
From: Eric Sandeen @ 2013-08-29 16:14 UTC (permalink / raw)
To: dsterba, Eric Sandeen, Josef Bacik, linux-btrfs, xfs
On 8/29/13 8:21 AM, David Sterba wrote:
> On Tue, Aug 13, 2013 at 02:38:05PM -0500, Eric Sandeen wrote:
>>> +. ./common/rc
>>> +. ./common/filter
>>> +
>>> +# real QA test starts here
>>> +_supported_fs btrfs
>>> +_supported_os Linux
>>> +_require_scratch
>>> +
>>> +_scratch_mkfs > /dev/null 2>&1
>>> +_scratch_mount
>>> +
>>> +# This will be set to subvolid 256. If this ever changes in the future for
>>> +# whatever reason we'll have to pull the subvolid out of the subvol list command
>>> +# but since it's a newly mkfs'ed fs we should be fine with this.
>>
>> . . . and then you grab it out of the subvol list command anyway ;)
>>
>> So really this comment should go, and it sure would be nice to have
>> a btrfs_get_subvolid() helper for future generations...
>
> This is available in the 'btrfs subvol show /subvol':
>
> # btrfs subvol show subv1
> /mnt/a15/subv1
> Name: subv1
> uuid: cf010ad0-38bf-7a42-88be-3360f68cd335
> Parent uuid: e6543f70-5d38-1845-b976-d18095860bdf
> Creation time: 2013-08-29 15:18:18
> Object ID: 258
> Generation (Gen): 6
> Gen at creation: 6
> Parent: 5
> Top Level: 5
> Flags: readonly
> Snapshot(s):
>
> Though it involves grep as well.
Ok, yeah, I just meant an xfstests helper routine, sorry.
I guess it could use the above, or subvol list as Josef
has done.
-Eric
> david
>
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-08-29 16:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-13 19:34 [PATCH] xfstests: btrfs/003: regression test for subvol delete V2 Josef Bacik
2013-08-13 19:38 ` Eric Sandeen
2013-08-29 13:21 ` David Sterba
2013-08-29 16:14 ` Eric Sandeen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).