From: Moby <moby@mobsternet.com>
To: linux-btrfs@vger.kernel.org
Subject: Re: BTRFS balance fails with -dusage=100
Date: Wed, 24 Jun 2015 12:33:57 -0500 [thread overview]
Message-ID: <558AEA05.2070901@mobsternet.com> (raw)
In-Reply-To: <5588D855.2080701@mobsternet.com>
On 06/22/2015 10:53 PM, Moby wrote:
> OpenSuSE 13.2 system with single BTRFS / mounted on top of /dev/md1.
> /dev/md1 is md raid5 across 4 SATA disks.
>
> System details are:
>
> Linux suse132 4.0.5-4.g56152db-default #1 SMP Thu Jun 18 15:11:06 UTC
> 2015 (56152db) x86_64 x86_64 x86_64 GNU/Linux
>
> btrfs-progs v4.1+20150622
>
> Label: none uuid: 33b98d97-606b-4968-a266-24a48a9fe50d
> Total devices 1 FS bytes used 884.21GiB
> devid 1 size 1.36TiB used 889.06GiB path /dev/md1
>
>
> Data, single: total=885.00GiB, used=883.12GiB
> System, DUP: total=32.00MiB, used=144.00KiB
> Metadata, DUP: total=2.00GiB, used=1.09GiB
> GlobalReserve, single: total=384.00MiB, used=0.00B
>
>
> Relevant entries from log are:
> 2015-06-22T22:46:32.238011-05:00 suse132 kernel: [90193.446128] BTRFS:
> bdev /dev/md1 errs: wr 9977, rd 0, flush 0, corrupt 0, gen 0
> 2015-06-22T22:46:32.238050-05:00 suse132 kernel: [90193.446158] BTRFS:
> bdev /dev/md1 errs: wr 9978, rd 0, flush 0, corrupt 0, gen 0
> 2015-06-22T22:46:32.238054-05:00 suse132 kernel: [90193.446179] BTRFS:
> bdev /dev/md1 errs: wr 9979, rd 0, flush 0, corrupt 0, gen 0
>
> System was (still is - other than btrfs balance) running fine. Then I
> did massive data I/O, copying and deleting and massive amounts of data
> to bring the system into it's present state. Once I was done with the
> I/O, kicked off btrfs balance start /.
> Above command failed. Then I started doing btrfs balance -dusage=XX /
> This command succeeds with XX upto and including 99. It fails when I
> set XX to 100. btrfs balance also fails if I omit the -dusage option.
> The errors in the log make no sense to me since the md raid device is
> not reporting any errors at all. Also running btrfs scrub reports no
> errors at all.
>
> Any ideas on how to get btrfs balance to succeed without errors would
> be welcome.
>
> Regards,
>
> --Moby
> --
> To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
>
>
On another run with -duage=95, I am now seeing the following (negative
percentage left value!)
Every 15.0s: sh -c date;btrfs balance status -v / Wed Jun 24
12:29:12 2015
Wed Jun 24 12:29:12 CDT 2015
Balance on '/' is running
306 out of about 145 chunks balanced (312 considered), -111% left
Dumping filters: flags 0x1, state 0x1, force is off
DATA (flags 0x2): balancing, usage=95
--Moby
next prev parent reply other threads:[~2015-06-24 17:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-23 3:53 BTRFS balance fails with -dusage=100 Moby
2015-06-24 17:33 ` Moby [this message]
2015-06-25 14:41 ` Moby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558AEA05.2070901@mobsternet.com \
--to=moby@mobsternet.com \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox