From: Hendrik Friedel <hendrik@friedels.name>
To: Donald Pearson <donaldwhpearson@gmail.com>
Cc: osandov@fb.com, Hugo Mills <hugo@carfax.org.uk>,
Btrfs BTRFS <linux-btrfs@vger.kernel.org>
Subject: Re: size 2.73TiB used 240.97GiB after balance
Date: Tue, 07 Jul 2015 07:42:33 +0200 [thread overview]
Message-ID: <559B66C9.6060606@friedels.name> (raw)
In-Reply-To: <CAC=t97AcztZ9vKvMe8o70F3VsGR-_9TdFO4t=Rdt8q=9hDYm8A@mail.gmail.com>
Hello,
while mounting works with the recovery option, the system locks after
reading.
dmesg shows:
[ 684.258246] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 684.258249] ata6.00: irq_stat 0x40000001
[ 684.258252] ata6.00: failed command: DATA SET MANAGEMENT
[ 684.258255] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 26
dma 512 out
[ 684.258255] res 51/04:01:01:00:00/00:00:00:00:00/a0 Emask
0x1 (device error)
[ 684.258256] ata6.00: status: { DRDY ERR }
[ 684.258258] ata6.00: error: { ABRT }
[ 684.258266] sd 5:0:0:0: [sdd] tag#26 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 684.258268] sd 5:0:0:0: [sdd] tag#26 Sense Key : Illegal Request
[current] [descriptor]
[ 684.258270] sd 5:0:0:0: [sdd] tag#26 Add. Sense: Unaligned write command
[ 684.258272] sd 5:0:0:0: [sdd] tag#26 CDB: Write same(16) 93 08 00 00
00 00 00 01 d3 80 00 00 00 80 00 00
So, also this drive is failing?!
Regards,
Hendrik
On 07.07.2015 00:59, Donald Pearson wrote:
> Anything in dmesg?
>
> On Mon, Jul 6, 2015 at 5:07 PM, hendrik@friedels.name
> <hendrik@friedels.name> wrote:
>> Hallo,
>>
>> It seems, that mounting works, but the System locks completely soon after I
>> backing up.
>>
>>
>> Greetings,
>>
>> Hendrik
>>
>>
>> ------ Originalnachricht------
>>
>> Von: Donald Pearson
>>
>> Datum: Mo., 6. Juli 2015 23:49
>>
>> An: Hendrik Friedel;
>>
>> Cc: Omar Sandoval;Hugo Mills;Btrfs BTRFS;
>>
>> Betreff:Re: size 2.73TiB used 240.97GiB after balance
>>
>>
>> If you can mount it RO, first thing to do is back up any data that youcare
>> about.According to the bug that Omar posted you should not try a
>> devicereplace and you should not try a scrub with a missing device.You may
>> be able to just do a device delete missing, then separately doa device add
>> of a new drive, or rebalance back in to raid1.On Mon, Jul 6, 2015 at 4:12
>> PM, Hendrik Friedel wrote:> Hello,>> oh dear, I fear I am in trouble:>
>> recovery-mounted, I tried to save some data, but the system hung.> So I
>> re-booted and sdc is now physically disconnected.>> Label: none uuid:
>> b4a6cce6-dc9c-4a13-80a4-ed6bc5b40bb8> Total devices 3 FS bytes used
>> 4.67TiB> devid 1 size 2.73TiB used 2.67TiB path /dev/sdc>
>> devid 2 size 2.73TiB used 2.67TiB path /dev/sdb> *** Some devices
>> missing>> I try to mount the rest again:> mount -o recovery,ro /dev/sdb
>> /mnt/__Complete_Disk> mount: wrong fs type, bad option, bad superblock on
>> /dev/sdb,> missing codepage or helper program, or other error>
>> In some cases useful info is found in syslog - try> dmesg | tail or
>> so>> root@homeserver:~# dmesg | tail> [ 447.059275] BTRFS info (device
>> sdc): enabling auto recovery> [ 447.059280] BTRFS info (device sdc): disk
>> space caching is enabled> [ 447.086844] BTRFS: failed to read chunk tree on
>> sdc> [ 447.110588] BTRFS: open_ctree failed> [ 474.496778] BTRFS info
>> (device sdc): enabling auto recovery> [ 474.496781] BTRFS info (device
>> sdc): disk space caching is enabled> [ 474.519005] BTRFS: failed to read
>> chunk tree on sdc> [ 474.540627] BTRFS: open_ctree failed>>> mount -o
>> degraded,ro /dev/sdb /mnt/__Complete_Disk> Does work now though.>> So, how
>> can I remove the reference to the failed disk and check the data for>
>> consistency (scrub I suppose, but is it safe?)?>> Regards,> Hendrik>>>>> On
>> 06.07.2015 22:52, Omar Sandoval wrote:>>>> On 07/06/2015 01:01 PM, Donald
>> Pearson wrote:>>>>>> Based on my experience Hugo's advice is critical, get
>> the bad drive>>> out of the pool when in raid56 and do not try to replace or
>> delete it>>> while it's still attached and recognized.>>>>>> If you add a
>> new device, mount degraded and rebalance. If you don't,>>> mount degraded
>> then device delete missing.>>>>>>> Watch out, replacing a missing device in
>> RAID 5/6 currently doesn't work>> and will cause a kernel BUG(). See my
>> patch series here:>>
>> http://www.spinics.net/lists/linux-btrfs/msg44874.html>>>>> --> Hendrik
>> Friedel> Auf dem Brink 12> 28844 Weyhe> Tel. 04203 8394854> Mobil 0178
>> 1874363>>> ---> Diese E-Mail wurde von Avast Antivirus-Software auf Viren
>> geprüft.> https://www.avast.com/antivirus>
--
Hendrik Friedel
Auf dem Brink 12
28844 Weyhe
Tel. 04203 8394854
Mobil 0178 1874363
---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus
next prev parent reply other threads:[~2015-07-07 5:42 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <000f4242.05e425492a977c7b@friedels.name>
2015-07-06 22:59 ` size 2.73TiB used 240.97GiB after balance Donald Pearson
2015-07-07 5:42 ` Hendrik Friedel [this message]
2015-07-07 13:14 ` Donald Pearson
2015-07-08 18:56 ` Hendrik Friedel
2015-07-08 19:06 ` Donald Pearson
2015-07-08 21:29 ` Hendrik Friedel
2015-07-08 22:16 ` Donald Pearson
2015-07-09 12:02 ` Austin S Hemmelgarn
2015-07-09 11:59 ` Austin S Hemmelgarn
2015-07-06 19:20 Hendrik Friedel
2015-07-06 19:44 ` Hendrik Friedel
2015-07-06 19:49 ` Hugo Mills
2015-07-06 20:01 ` Donald Pearson
2015-07-06 20:52 ` Omar Sandoval
2015-07-06 21:12 ` Hendrik Friedel
2015-07-06 21:49 ` Donald Pearson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559B66C9.6060606@friedels.name \
--to=hendrik@friedels.name \
--cc=donaldwhpearson@gmail.com \
--cc=hugo@carfax.org.uk \
--cc=linux-btrfs@vger.kernel.org \
--cc=osandov@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).