From: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
To: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>,
"linux-btrfs@vger.kernel.org" <linux-btrfs@vger.kernel.org>
Subject: Re: BTRFS: space_info 4 has 18446742286429913088 free, is not full
Date: Thu, 6 Oct 2016 11:04:06 +0800 [thread overview]
Message-ID: <57F5BF26.9090409@cn.fujitsu.com> (raw)
In-Reply-To: <85f85ca6-95c0-1394-9b09-93dcc00c2319@profihost.ag>
Hi,
On 09/29/2016 03:27 PM, Stefan Priebe - Profihost AG wrote:
> Am 29.09.2016 um 09:13 schrieb Wang Xiaoguang:
>>>> I found that compress sometime report ENOSPC error even in 4.8-rc8,
>>>> currently
>>> I cannot confirm that as i do not have anough space to test this without
>>> compression ;-( But yes i've compression enabled.
>> I might not get you, my poor english :)
>> You mean that you only get ENOSPC error when compression is enabled?
>>
>> And when compression is not enabled, you do not get ENOSPC error?
> I can't tell you. I cannot test with compression not enabled. I do not
> have anough free space on this disk.
I had just sent two patches to fix false enospc error for compression,
please have a try, they fix false enospc error in my test environment.
btrfs: fix false enospc for compression
btrfs: improve inode's outstanding_extents computation
I apply these two patchs in linux upstream tree, the latest commit
is 41844e36206be90cd4d962ea49b0abc3612a99d0.
Regards,
Xiaoguang Wang
>
>>>> I'm trying to fix it.
>>> That sounds good but do you also get the
>>> BTRFS: space_info 4 has 18446742286429913088 free, is not full
>>>
>>> kernel messages on umount? if not you might have found another problem.
>> Yes, I seem similar messages, you can paste you whole dmesg info here.
> ------------[ cut here ]------------
> WARNING: CPU: 2 PID: 5187 at fs/btrfs/extent-tree.c:5790
> btrfs_free_block_groups+0x346/0x430 [btrfs]()
> Modules linked in: netconsole xt_multiport iptable_filter ip_tables
> x_tables 8021q garp bonding x86_pkg_temp_thermal coretemp kvm_intel kvm
> irqbypass sb_edac crc32_pclmul edac_core i2c_i801 i40e(O) vxlan
> ip6_udp_tunnel udp_tunnel shpchp ipmi_si ipmi_msghandler button loop
> btrfs dm_mod raid10 raid0 multipath linear raid456 async_raid6_recov
> async_memcpy async_pq async_xor async_tx xor raid6_pq igb i2c_algo_bit
> i2c_core usbhid raid1 md_mod xhci_pci sg ehci_pci xhci_hcd ehci_hcd
> sd_mod ahci usbcore ptp libahci usb_common pps_core aacraid
> CPU: 2 PID: 5187 Comm: umount Tainted: G O 4.4.22+63-ph #1
> Hardware name: Supermicro Super Server/X10SRi-F, BIOS 2.0 12/17/2015
> 0000000000000000 ffff880fda777d00 ffffffff813b69c3 0000000000000000
> ffffffffc067a099 ffff880fda777d38 ffffffff810821c6 0000000000000000
> ffff880074bf0a00 ffff88103c10c088 ffff88103c10c000 ffff88103c10c098
> Call Trace:
> [<ffffffff813b69c3>] dump_stack+0x63/0x90
> [<ffffffff810821c6>] warn_slowpath_common+0x86/0xc0
> [<ffffffff810822ba>] warn_slowpath_null+0x1a/0x20
> [<ffffffffc05de9a6>] btrfs_free_block_groups+0x346/0x430 [btrfs]
> [<ffffffffc05f0bad>] close_ctree+0x15d/0x330 [btrfs]
> [<ffffffffc05bf409>] btrfs_put_super+0x19/0x20 [btrfs]
> [<ffffffff811c85af>] generic_shutdown_super+0x6f/0x100
> [<ffffffff811c8652>] kill_anon_super+0x12/0x20
> [<ffffffffc05c0376>] btrfs_kill_super+0x16/0xa0 [btrfs]
> [<ffffffff811c7ff3>] deactivate_locked_super+0x43/0x70
> [<ffffffff811c807c>] deactivate_super+0x5c/0x60
> [<ffffffff811e3b5f>] cleanup_mnt+0x3f/0x90
> [<ffffffff811e3bf2>] __cleanup_mnt+0x12/0x20
> [<ffffffff8109dad1>] task_work_run+0x81/0xa0
> [<ffffffff810021c0>] exit_to_usermode_loop+0xb0/0xc0
> [<ffffffff81002b44>] syscall_return_slowpath+0xd4/0x130
> [<ffffffff8169dc0c>] int_ret_from_sys_call+0x25/0x8f
> ---[ end trace cee6ace13018e13e ]---
> ------------[ cut here ]------------
> WARNING: CPU: 2 PID: 5187 at fs/btrfs/extent-tree.c:5791
> btrfs_free_block_groups+0x365/0x430 [btrfs]()
> Modules linked in: netconsole xt_multiport iptable_filter ip_tables
> x_tables 8021q garp bonding x86_pkg_temp_thermal coretemp kvm_intel kvm
> irqbypass sb_edac crc32_pclmul edac_core i2c_i801 i40e(O) vxlan
> ip6_udp_tunnel udp_tunnel shpchp ipmi_si ipmi_msghandler button loop
> btrfs dm_mod raid10 raid0 multipath linear raid456 async_raid6_recov
> async_memcpy async_pq async_xor async_tx xor raid6_pq igb i2c_algo_bit
> i2c_core usbhid raid1 md_mod xhci_pci sg ehci_pci xhci_hcd ehci_hcd
> sd_mod ahci usbcore ptp libahci usb_common pps_core aacraid
> CPU: 2 PID: 5187 Comm: umount Tainted: G W O 4.4.22+63-ph #1
> Hardware name: Supermicro Super Server/X10SRi-F, BIOS 2.0 12/17/2015
> 0000000000000000 ffff880fda777d00 ffffffff813b69c3 0000000000000000
> ffffffffc067a099 ffff880fda777d38 ffffffff810821c6 0000000000000000
> ffff880074bf0a00 ffff88103c10c088 ffff88103c10c000 ffff88103c10c098
> Call Trace:
> [<ffffffff813b69c3>] dump_stack+0x63/0x90
> [<ffffffff810821c6>] warn_slowpath_common+0x86/0xc0
> [<ffffffff810822ba>] warn_slowpath_null+0x1a/0x20
> [<ffffffffc05de9c5>] btrfs_free_block_groups+0x365/0x430 [btrfs]
> [<ffffffffc05f0bad>] close_ctree+0x15d/0x330 [btrfs]
> [<ffffffffc05bf409>] btrfs_put_super+0x19/0x20 [btrfs]
> [<ffffffff811c85af>] generic_shutdown_super+0x6f/0x100
> [<ffffffff811c8652>] kill_anon_super+0x12/0x20
> [<ffffffffc05c0376>] btrfs_kill_super+0x16/0xa0 [btrfs]
> [<ffffffff811c7ff3>] deactivate_locked_super+0x43/0x70
> [<ffffffff811c807c>] deactivate_super+0x5c/0x60
> [<ffffffff811e3b5f>] cleanup_mnt+0x3f/0x90
> [<ffffffff811e3bf2>] __cleanup_mnt+0x12/0x20
> [<ffffffff8109dad1>] task_work_run+0x81/0xa0
> [<ffffffff810021c0>] exit_to_usermode_loop+0xb0/0xc0
> [<ffffffff81002b44>] syscall_return_slowpath+0xd4/0x130
> [<ffffffff8169dc0c>] int_ret_from_sys_call+0x25/0x8f
> ---[ end trace cee6ace13018e13f ]---
> ------------[ cut here ]------------
> WARNING: CPU: 2 PID: 5187 at fs/btrfs/extent-tree.c:10151
> btrfs_free_block_groups+0x291/0x430 [btrfs]()
> Modules linked in: netconsole xt_multiport iptable_filter ip_tables
> x_tables 8021q garp bonding x86_pkg_temp_thermal coretemp kvm_intel kvm
> irqbypass sb_edac crc32_pclmul edac_core i2c_i801 i40e(O) vxlan
> ip6_udp_tunnel udp_tunnel shpchp ipmi_si ipmi_msghandler button loop
> btrfs dm_mod raid10 raid0 multipath linear raid456 async_raid6_recov
> async_memcpy async_pq async_xor async_tx xor raid6_pq igb i2c_algo_bit
> i2c_core usbhid raid1 md_mod xhci_pci sg ehci_pci xhci_hcd ehci_hcd
> sd_mod ahci usbcore ptp libahci usb_common pps_core aacraid
> CPU: 2 PID: 5187 Comm: umount Tainted: G W O 4.4.22+63-ph #1
> Hardware name: Supermicro Super Server/X10SRi-F, BIOS 2.0 12/17/2015
> 0000000000000000 ffff880fda777d00 ffffffff813b69c3 0000000000000000
> ffffffffc067a099 ffff880fda777d38 ffffffff810821c6 ffff880074bf0000
> ffff880074bf0088 ffff880074bf0df8 ffff88103c10c000 0000000000000000
> Call Trace:
> [<ffffffff813b69c3>] dump_stack+0x63/0x90
> [<ffffffff810821c6>] warn_slowpath_common+0x86/0xc0
> [<ffffffff810822ba>] warn_slowpath_null+0x1a/0x20
> [<ffffffffc05de8f1>] btrfs_free_block_groups+0x291/0x430 [btrfs]
> [<ffffffffc05f0bad>] close_ctree+0x15d/0x330 [btrfs]
> [<ffffffffc05bf409>] btrfs_put_super+0x19/0x20 [btrfs]
> [<ffffffff811c85af>] generic_shutdown_super+0x6f/0x100
> [<ffffffff811c8652>] kill_anon_super+0x12/0x20
> [<ffffffffc05c0376>] btrfs_kill_super+0x16/0xa0 [btrfs]
> [<ffffffff811c7ff3>] deactivate_locked_super+0x43/0x70
> [<ffffffff811c807c>] deactivate_super+0x5c/0x60
> [<ffffffff811e3b5f>] cleanup_mnt+0x3f/0x90
> [<ffffffff811e3bf2>] __cleanup_mnt+0x12/0x20
> [<ffffffff8109dad1>] task_work_run+0x81/0xa0
> [<ffffffff810021c0>] exit_to_usermode_loop+0xb0/0xc0
> [<ffffffff81002b44>] syscall_return_slowpath+0xd4/0x130
> [<ffffffff8169dc0c>] int_ret_from_sys_call+0x25/0x8f
> ---[ end trace cee6ace13018e140 ]---
> BTRFS: space_info 4 has 18446742182612910080 free, is not full
> BTRFS: space_info total=82678120448, used=64784695296, pinned=0,
> reserved=0, may_use=1908990066688, readonly=0
>
> Greets,
> Stefan
>
>> Regards,
>> Xiaoguang Wang
>>
>>> Stefan
>>>
>>>> Regards,
>>>> Xiaoguang Wang
>>>>
>>>>> I tried hard to reproduce it but i can't get it to reproduce with a
>>>>> test
>>>>> script. Any ideas?
>>>>>
>>>>> Stefan
>>>>>
>>>>>> Reagrds,
>>>>>> Xiaoguang Wang
>>>>>>
>>>>>>> Greets,
>>>>>>> Stefan
>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Xiaoguang Wang
>>>>>>>>> Greets,
>>>>>>>>> Stefan
>>>>>>>>> --
>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>>>> linux-btrfs" in
>>>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>>>>
>>>>>>>>>
>>>>
>>
>>
>
next prev parent reply other threads:[~2016-10-06 3:09 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-28 11:15 BTRFS: space_info 4 has 18446742286429913088 free, is not full Stefan Priebe - Profihost AG
2016-09-28 11:35 ` Wang Xiaoguang
2016-09-28 12:02 ` Stefan Priebe - Profihost AG
2016-09-28 12:10 ` Wang Xiaoguang
2016-09-28 12:25 ` Stefan Priebe - Profihost AG
2016-09-29 6:49 ` Stefan Priebe - Profihost AG
2016-09-29 6:55 ` Wang Xiaoguang
2016-09-29 7:09 ` Stefan Priebe - Profihost AG
2016-09-29 7:13 ` Wang Xiaoguang
2016-09-29 7:27 ` Stefan Priebe - Profihost AG
2016-09-29 10:03 ` Adam Borowski
2016-09-29 10:05 ` Stefan Priebe - Profihost AG
2016-10-06 3:04 ` Wang Xiaoguang [this message]
2016-10-06 7:32 ` Stefan Priebe - Profihost AG
2016-10-06 7:35 ` Stefan Priebe - Profihost AG
2016-10-07 7:03 ` Stefan Priebe - Profihost AG
2016-10-07 7:17 ` Wang Xiaoguang
2016-10-07 7:47 ` Paul Jones
2016-10-07 7:48 ` Paul Jones
2016-10-07 7:59 ` Stefan Priebe - Profihost AG
2016-10-07 8:05 ` Stefan Priebe - Profihost AG
2016-10-07 8:06 ` Stefan Priebe - Profihost AG
2016-10-07 8:07 ` Wang Xiaoguang
2016-10-07 8:16 ` Stefan Priebe - Profihost AG
2016-10-07 8:19 ` Wang Xiaoguang
2016-10-07 9:33 ` Holger Hoffstätte
2016-10-08 5:56 ` Stefan Priebe - Profihost AG
2016-10-08 20:49 ` Stefan Priebe - Profihost AG
2016-10-08 6:05 ` Stefan Priebe - Profihost AG
2016-10-10 20:06 ` Stefan Priebe - Profihost AG
2016-10-11 3:16 ` Wang Xiaoguang
2016-10-23 17:47 ` Stefan Priebe - Profihost AG
2016-10-25 10:48 ` Wang Xiaoguang
2016-09-28 12:47 ` Holger Hoffstätte
2016-09-28 13:06 ` Stefan Priebe - Profihost AG
2016-09-28 13:44 ` Holger Hoffstätte
2016-09-28 13:59 ` Stefan Priebe - Profihost AG
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57F5BF26.9090409@cn.fujitsu.com \
--to=wangxg.fnst@cn.fujitsu.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=s.priebe@profihost.ag \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).