From: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
To: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>,
"linux-btrfs@vger.kernel.org" <linux-btrfs@vger.kernel.org>
Subject: Re: BTRFS: space_info 4 has 18446742286429913088 free, is not full
Date: Fri, 7 Oct 2016 16:07:07 +0800 [thread overview]
Message-ID: <57F757AB.4010609@cn.fujitsu.com> (raw)
In-Reply-To: <fd198a26-2330-3965-94c4-cca0d08a55d8@profihost.ag>
hello,
On 10/07/2016 04:06 PM, Stefan Priebe - Profihost AG wrote:
> and it shows:
>
> PAG | scan 33829e5 | steal 1968e3 | stall 0 | |
> | | swin 257071 | swout 346960 |
>
> but the highest user space prog uses only 190MB.
If you don't apply my patches, there will be no OOMs in your test
environment?
I want to confirm whether this OOM is caused by my patches...
Regards,
Xiaoguang Wang
>
> greets,
> Stefan
>
> Am 07.10.2016 um 09:17 schrieb Wang Xiaoguang:
>> Hi,
>>
>> On 10/07/2016 03:03 PM, Stefan Priebe - Profihost AG wrote:
>>> Dear Wang,
>>>
>>> can't use v4.8.0 as i always get OOMs and total machine crashes.
>>>
>>> Complete traces with your patch and some more btrfs patches applied (in
>>> the hope in fixes the OOM but it did not):
>>> http://pastebin.com/raw/6vmRSDm1
>> I didn't see any such OOMs...
>> Can you try holger's tree with my patches.
>>
>> Regards,
>> Xiaoguang Wang
>>> Greets,
>>> Stefan
>>> Am 06.10.2016 um 05:04 schrieb Wang Xiaoguang:
>>>> Hi,
>>>>
>>>> On 09/29/2016 03:27 PM, Stefan Priebe - Profihost AG wrote:
>>>>> Am 29.09.2016 um 09:13 schrieb Wang Xiaoguang:
>>>>>>>> I found that compress sometime report ENOSPC error even in 4.8-rc8,
>>>>>>>> currently
>>>>>>> I cannot confirm that as i do not have anough space to test this
>>>>>>> without
>>>>>>> compression ;-( But yes i've compression enabled.
>>>>>> I might not get you, my poor english :)
>>>>>> You mean that you only get ENOSPC error when compression is enabled?
>>>>>>
>>>>>> And when compression is not enabled, you do not get ENOSPC error?
>>>>> I can't tell you. I cannot test with compression not enabled. I do not
>>>>> have anough free space on this disk.
>>>> I had just sent two patches to fix false enospc error for compression,
>>>> please have a try, they fix false enospc error in my test environment.
>>>> btrfs: fix false enospc for compression
>>>> btrfs: improve inode's outstanding_extents computation
>>>>
>>>> I apply these two patchs in linux upstream tree, the latest commit
>>>> is 41844e36206be90cd4d962ea49b0abc3612a99d0.
>>>>
>>>> Regards,
>>>> Xiaoguang Wang
>>>>
>>>>>>>> I'm trying to fix it.
>>>>>>> That sounds good but do you also get the
>>>>>>> BTRFS: space_info 4 has 18446742286429913088 free, is not full
>>>>>>>
>>>>>>> kernel messages on umount? if not you might have found another
>>>>>>> problem.
>>>>>> Yes, I seem similar messages, you can paste you whole dmesg info here.
>>>>> ------------[ cut here ]------------
>>>>> WARNING: CPU: 2 PID: 5187 at fs/btrfs/extent-tree.c:5790
>>>>> btrfs_free_block_groups+0x346/0x430 [btrfs]()
>>>>> Modules linked in: netconsole xt_multiport iptable_filter ip_tables
>>>>> x_tables 8021q garp bonding x86_pkg_temp_thermal coretemp kvm_intel kvm
>>>>> irqbypass sb_edac crc32_pclmul edac_core i2c_i801 i40e(O) vxlan
>>>>> ip6_udp_tunnel udp_tunnel shpchp ipmi_si ipmi_msghandler button loop
>>>>> btrfs dm_mod raid10 raid0 multipath linear raid456 async_raid6_recov
>>>>> async_memcpy async_pq async_xor async_tx xor raid6_pq igb i2c_algo_bit
>>>>> i2c_core usbhid raid1 md_mod xhci_pci sg ehci_pci xhci_hcd ehci_hcd
>>>>> sd_mod ahci usbcore ptp libahci usb_common pps_core aacraid
>>>>> CPU: 2 PID: 5187 Comm: umount Tainted: G O 4.4.22+63-ph #1
>>>>> Hardware name: Supermicro Super Server/X10SRi-F, BIOS 2.0 12/17/2015
>>>>> 0000000000000000 ffff880fda777d00 ffffffff813b69c3 0000000000000000
>>>>> ffffffffc067a099 ffff880fda777d38 ffffffff810821c6 0000000000000000
>>>>> ffff880074bf0a00 ffff88103c10c088 ffff88103c10c000 ffff88103c10c098
>>>>> Call Trace:
>>>>> [<ffffffff813b69c3>] dump_stack+0x63/0x90
>>>>> [<ffffffff810821c6>] warn_slowpath_common+0x86/0xc0
>>>>> [<ffffffff810822ba>] warn_slowpath_null+0x1a/0x20
>>>>> [<ffffffffc05de9a6>] btrfs_free_block_groups+0x346/0x430 [btrfs]
>>>>> [<ffffffffc05f0bad>] close_ctree+0x15d/0x330 [btrfs]
>>>>> [<ffffffffc05bf409>] btrfs_put_super+0x19/0x20 [btrfs]
>>>>> [<ffffffff811c85af>] generic_shutdown_super+0x6f/0x100
>>>>> [<ffffffff811c8652>] kill_anon_super+0x12/0x20
>>>>> [<ffffffffc05c0376>] btrfs_kill_super+0x16/0xa0 [btrfs]
>>>>> [<ffffffff811c7ff3>] deactivate_locked_super+0x43/0x70
>>>>> [<ffffffff811c807c>] deactivate_super+0x5c/0x60
>>>>> [<ffffffff811e3b5f>] cleanup_mnt+0x3f/0x90
>>>>> [<ffffffff811e3bf2>] __cleanup_mnt+0x12/0x20
>>>>> [<ffffffff8109dad1>] task_work_run+0x81/0xa0
>>>>> [<ffffffff810021c0>] exit_to_usermode_loop+0xb0/0xc0
>>>>> [<ffffffff81002b44>] syscall_return_slowpath+0xd4/0x130
>>>>> [<ffffffff8169dc0c>] int_ret_from_sys_call+0x25/0x8f
>>>>> ---[ end trace cee6ace13018e13e ]---
>>>>> ------------[ cut here ]------------
>>>>> WARNING: CPU: 2 PID: 5187 at fs/btrfs/extent-tree.c:5791
>>>>> btrfs_free_block_groups+0x365/0x430 [btrfs]()
>>>>> Modules linked in: netconsole xt_multiport iptable_filter ip_tables
>>>>> x_tables 8021q garp bonding x86_pkg_temp_thermal coretemp kvm_intel kvm
>>>>> irqbypass sb_edac crc32_pclmul edac_core i2c_i801 i40e(O) vxlan
>>>>> ip6_udp_tunnel udp_tunnel shpchp ipmi_si ipmi_msghandler button loop
>>>>> btrfs dm_mod raid10 raid0 multipath linear raid456 async_raid6_recov
>>>>> async_memcpy async_pq async_xor async_tx xor raid6_pq igb i2c_algo_bit
>>>>> i2c_core usbhid raid1 md_mod xhci_pci sg ehci_pci xhci_hcd ehci_hcd
>>>>> sd_mod ahci usbcore ptp libahci usb_common pps_core aacraid
>>>>> CPU: 2 PID: 5187 Comm: umount Tainted: G W O 4.4.22+63-ph #1
>>>>> Hardware name: Supermicro Super Server/X10SRi-F, BIOS 2.0 12/17/2015
>>>>> 0000000000000000 ffff880fda777d00 ffffffff813b69c3 0000000000000000
>>>>> ffffffffc067a099 ffff880fda777d38 ffffffff810821c6 0000000000000000
>>>>> ffff880074bf0a00 ffff88103c10c088 ffff88103c10c000 ffff88103c10c098
>>>>> Call Trace:
>>>>> [<ffffffff813b69c3>] dump_stack+0x63/0x90
>>>>> [<ffffffff810821c6>] warn_slowpath_common+0x86/0xc0
>>>>> [<ffffffff810822ba>] warn_slowpath_null+0x1a/0x20
>>>>> [<ffffffffc05de9c5>] btrfs_free_block_groups+0x365/0x430 [btrfs]
>>>>> [<ffffffffc05f0bad>] close_ctree+0x15d/0x330 [btrfs]
>>>>> [<ffffffffc05bf409>] btrfs_put_super+0x19/0x20 [btrfs]
>>>>> [<ffffffff811c85af>] generic_shutdown_super+0x6f/0x100
>>>>> [<ffffffff811c8652>] kill_anon_super+0x12/0x20
>>>>> [<ffffffffc05c0376>] btrfs_kill_super+0x16/0xa0 [btrfs]
>>>>> [<ffffffff811c7ff3>] deactivate_locked_super+0x43/0x70
>>>>> [<ffffffff811c807c>] deactivate_super+0x5c/0x60
>>>>> [<ffffffff811e3b5f>] cleanup_mnt+0x3f/0x90
>>>>> [<ffffffff811e3bf2>] __cleanup_mnt+0x12/0x20
>>>>> [<ffffffff8109dad1>] task_work_run+0x81/0xa0
>>>>> [<ffffffff810021c0>] exit_to_usermode_loop+0xb0/0xc0
>>>>> [<ffffffff81002b44>] syscall_return_slowpath+0xd4/0x130
>>>>> [<ffffffff8169dc0c>] int_ret_from_sys_call+0x25/0x8f
>>>>> ---[ end trace cee6ace13018e13f ]---
>>>>> ------------[ cut here ]------------
>>>>> WARNING: CPU: 2 PID: 5187 at fs/btrfs/extent-tree.c:10151
>>>>> btrfs_free_block_groups+0x291/0x430 [btrfs]()
>>>>> Modules linked in: netconsole xt_multiport iptable_filter ip_tables
>>>>> x_tables 8021q garp bonding x86_pkg_temp_thermal coretemp kvm_intel kvm
>>>>> irqbypass sb_edac crc32_pclmul edac_core i2c_i801 i40e(O) vxlan
>>>>> ip6_udp_tunnel udp_tunnel shpchp ipmi_si ipmi_msghandler button loop
>>>>> btrfs dm_mod raid10 raid0 multipath linear raid456 async_raid6_recov
>>>>> async_memcpy async_pq async_xor async_tx xor raid6_pq igb i2c_algo_bit
>>>>> i2c_core usbhid raid1 md_mod xhci_pci sg ehci_pci xhci_hcd ehci_hcd
>>>>> sd_mod ahci usbcore ptp libahci usb_common pps_core aacraid
>>>>> CPU: 2 PID: 5187 Comm: umount Tainted: G W O 4.4.22+63-ph #1
>>>>> Hardware name: Supermicro Super Server/X10SRi-F, BIOS 2.0 12/17/2015
>>>>> 0000000000000000 ffff880fda777d00 ffffffff813b69c3 0000000000000000
>>>>> ffffffffc067a099 ffff880fda777d38 ffffffff810821c6 ffff880074bf0000
>>>>> ffff880074bf0088 ffff880074bf0df8 ffff88103c10c000 0000000000000000
>>>>> Call Trace:
>>>>> [<ffffffff813b69c3>] dump_stack+0x63/0x90
>>>>> [<ffffffff810821c6>] warn_slowpath_common+0x86/0xc0
>>>>> [<ffffffff810822ba>] warn_slowpath_null+0x1a/0x20
>>>>> [<ffffffffc05de8f1>] btrfs_free_block_groups+0x291/0x430 [btrfs]
>>>>> [<ffffffffc05f0bad>] close_ctree+0x15d/0x330 [btrfs]
>>>>> [<ffffffffc05bf409>] btrfs_put_super+0x19/0x20 [btrfs]
>>>>> [<ffffffff811c85af>] generic_shutdown_super+0x6f/0x100
>>>>> [<ffffffff811c8652>] kill_anon_super+0x12/0x20
>>>>> [<ffffffffc05c0376>] btrfs_kill_super+0x16/0xa0 [btrfs]
>>>>> [<ffffffff811c7ff3>] deactivate_locked_super+0x43/0x70
>>>>> [<ffffffff811c807c>] deactivate_super+0x5c/0x60
>>>>> [<ffffffff811e3b5f>] cleanup_mnt+0x3f/0x90
>>>>> [<ffffffff811e3bf2>] __cleanup_mnt+0x12/0x20
>>>>> [<ffffffff8109dad1>] task_work_run+0x81/0xa0
>>>>> [<ffffffff810021c0>] exit_to_usermode_loop+0xb0/0xc0
>>>>> [<ffffffff81002b44>] syscall_return_slowpath+0xd4/0x130
>>>>> [<ffffffff8169dc0c>] int_ret_from_sys_call+0x25/0x8f
>>>>> ---[ end trace cee6ace13018e140 ]---
>>>>> BTRFS: space_info 4 has 18446742182612910080 free, is not full
>>>>> BTRFS: space_info total=82678120448, used=64784695296, pinned=0,
>>>>> reserved=0, may_use=1908990066688, readonly=0
>>>>>
>>>>> Greets,
>>>>> Stefan
>>>>>
>>>>>> Regards,
>>>>>> Xiaoguang Wang
>>>>>>
>>>>>>> Stefan
>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Xiaoguang Wang
>>>>>>>>
>>>>>>>>> I tried hard to reproduce it but i can't get it to reproduce with a
>>>>>>>>> test
>>>>>>>>> script. Any ideas?
>>>>>>>>>
>>>>>>>>> Stefan
>>>>>>>>>
>>>>>>>>>> Reagrds,
>>>>>>>>>> Xiaoguang Wang
>>>>>>>>>>
>>>>>>>>>>> Greets,
>>>>>>>>>>> Stefan
>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>> Xiaoguang Wang
>>>>>>>>>>>>> Greets,
>>>>>>>>>>>>> Stefan
>>>>>>>>>>>>> --
>>>>>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>>>>>>>> linux-btrfs" in
>>>>>>>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>>>>>>>> More majordomo info at
>>>>>>>>>>>>> http://vger.kernel.org/majordomo-info.html
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>
>>
>>
>
next prev parent reply other threads:[~2016-10-07 8:13 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-28 11:15 BTRFS: space_info 4 has 18446742286429913088 free, is not full Stefan Priebe - Profihost AG
2016-09-28 11:35 ` Wang Xiaoguang
2016-09-28 12:02 ` Stefan Priebe - Profihost AG
2016-09-28 12:10 ` Wang Xiaoguang
2016-09-28 12:25 ` Stefan Priebe - Profihost AG
2016-09-29 6:49 ` Stefan Priebe - Profihost AG
2016-09-29 6:55 ` Wang Xiaoguang
2016-09-29 7:09 ` Stefan Priebe - Profihost AG
2016-09-29 7:13 ` Wang Xiaoguang
2016-09-29 7:27 ` Stefan Priebe - Profihost AG
2016-09-29 10:03 ` Adam Borowski
2016-09-29 10:05 ` Stefan Priebe - Profihost AG
2016-10-06 3:04 ` Wang Xiaoguang
2016-10-06 7:32 ` Stefan Priebe - Profihost AG
2016-10-06 7:35 ` Stefan Priebe - Profihost AG
2016-10-07 7:03 ` Stefan Priebe - Profihost AG
2016-10-07 7:17 ` Wang Xiaoguang
2016-10-07 7:47 ` Paul Jones
2016-10-07 7:48 ` Paul Jones
2016-10-07 7:59 ` Stefan Priebe - Profihost AG
2016-10-07 8:05 ` Stefan Priebe - Profihost AG
2016-10-07 8:06 ` Stefan Priebe - Profihost AG
2016-10-07 8:07 ` Wang Xiaoguang [this message]
2016-10-07 8:16 ` Stefan Priebe - Profihost AG
2016-10-07 8:19 ` Wang Xiaoguang
2016-10-07 9:33 ` Holger Hoffstätte
2016-10-08 5:56 ` Stefan Priebe - Profihost AG
2016-10-08 20:49 ` Stefan Priebe - Profihost AG
2016-10-08 6:05 ` Stefan Priebe - Profihost AG
2016-10-10 20:06 ` Stefan Priebe - Profihost AG
2016-10-11 3:16 ` Wang Xiaoguang
2016-10-23 17:47 ` Stefan Priebe - Profihost AG
2016-10-25 10:48 ` Wang Xiaoguang
2016-09-28 12:47 ` Holger Hoffstätte
2016-09-28 13:06 ` Stefan Priebe - Profihost AG
2016-09-28 13:44 ` Holger Hoffstätte
2016-09-28 13:59 ` Stefan Priebe - Profihost AG
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57F757AB.4010609@cn.fujitsu.com \
--to=wangxg.fnst@cn.fujitsu.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=s.priebe@profihost.ag \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).