From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Fedyk Subject: Re: Oops while attempting to mount degraded multi-device raid1 data/metadata btrfs filesystem Date: Fri, 26 Mar 2010 10:49:57 -0700 Message-ID: <93cdabd21003261049h4a468bf6ubd7bb8be1ac68d41@mail.gmail.com> References: <93cdabd21003051219m6238b1b8nd88ca7fc3724d67a@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 To: linux-btrfs Return-path: In-Reply-To: <93cdabd21003051219m6238b1b8nd88ca7fc3724d67a@mail.gmail.com> List-ID: I still get this oops with the latest btrfs kernel code from git (as of 2010-03-21) compiled against 2.6.32.9-70.fc12.x86_64 btrfs: failed to read the system array on sda7 btrfs: open_ctree failed device fsid 3546a1a7a4563c4b-2b1289f58c64988c devid 1 transid 974 /dev/= sda7 btrfs: allowing degraded mounts Error searching slot for orphan: -5 BUG: sleeping function called from invalid context at arch/x86/mm/fault= =2Ec:1071 in_atomic(): 0, irqs_disabled(): 1, pid: 15434, name: mount Pid: 15434, comm: mount Not tainted 2.6.32.9-70.fc12.x86_64 #1 Call Trace: [] __might_sleep+0xed/0xef [] do_page_fault+0x172/0x2a0 [] page_fault+0x25/0x30 [] ? _spin_lock_irq+0x15/0x2c [] __down_read+0x17/0xaa [] ? block_group_cache_tree_search+0x24/0x95 [btrfs] [] down_read+0x31/0x35 [] find_free_extent+0x2bb/0x828 [btrfs] [] ? __wait_on_bit+0x69/0x7b [] ? wake_bit_function+0x0/0x33 [] btrfs_reserve_extent+0xc8/0x17d [btrfs] [] ? test_range_bit+0x59/0xeb [btrfs] [] btrfs_alloc_free_block+0x5e/0x198 [btrfs] [] __btrfs_cow_block+0x103/0x30d [btrfs] [] ? btrfs_find_ref_cluster+0x35/0x145 [btrfs] [] ? btrfs_header_generation+0x17/0x2c [btrfs] [] btrfs_cow_block+0x101/0x110 [btrfs] [] commit_cowonly_roots+0x59/0x198 [btrfs] [] ? process_timeout+0x0/0x10 [] btrfs_commit_transaction+0x36a/0x603 [btrfs] [] ? autoremove_wake_function+0x0/0x39 [] ? start_transaction+0x122/0x12e [btrfs] [] btrfs_sync_fs+0x65/0x69 [btrfs] [] sync_quota_sb+0x53/0x101 [] __sync_filesystem+0x46/0x77 [] sync_filesystem+0x4b/0x4f [] generic_shutdown_super+0x27/0xc9 [] kill_anon_super+0x16/0x4f [] deactivate_super+0x56/0x6b [] mntput_no_expire+0xb4/0xec [] do_add_mount+0x107/0x117 [] do_mount+0x755/0x793 [] ? alloc_pages_current+0x95/0x9e [] sys_mount+0x88/0xc2 [] system_call_fastpath+0x16/0x1b BUG: unable to handle kernel NULL pointer dereference at 00000000000000= c4 IP: [] _spin_lock_irq+0x15/0x2c PGD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq CPU 0 Modules linked in: fuse nls_utf8 cifs sunrpc cpufreq_ondemand powernow_k8 freq_table ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 uinput arc4 ecb ath5k snd_hda_codec_realtek mac80211 sky2 snd_hda_intel snd_hda_codec ath snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq ppdev k8temp i2c_nforce2 snd_seq_device snd_pcm_oss snd_mixer_oss parport_pc edac_core snd_pcm parport snd_timer wmi snd soundcore joydev edac_mce_amd cfg80211 snd_page_alloc rfkill btrfs zlib_deflate libcrc32c dm_multipath pata_acpi pata_artop firewire_ohci firewire_core crc_itu_t usb_storage ata_generic pata_amd sata_nv radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan] Pid: 15434, comm: mount Not tainted 2.6.32.9-70.fc12.x86_64 #1 ASE380/AST180/APM8 RIP: 0010:[] [] _spin_lock_irq+0x1= 5/0x2c RSP: 0018:ffff88002f579858 EFLAGS: 00010082 RAX: 0000000000010000 RBX: 00000000000000c0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000015 RDI: 00000000000000c4 RBP: ffff88002f579858 R08: 0000000000000000 R09: ffffffffffffffff R10: ffff8800056157b0 R11: ffff88002f579c78 R12: 00000000000000c0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 =46S: 00007feb33a9d7e0(0000) GS:ffff880005600000(0000) knlGS:00000000f= 66f67a0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000000c4 CR3: 000000002f7a9000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 15434, threadinfo ffff88002f578000, task ffff88001a= 759760) Stack: ffff88002f579898 ffffffff814559f3 0000000000000000 0000000000002a7f <0> ffff88002f5798a8 ffffffffa0159dac 00000000000000c0 ffff88003244a118 <0> ffff88002f5798b8 ffffffff81455121 ffff88002f5798b8 0000000000000000 Call Trace: [] __down_read+0x17/0xaa [] ? block_group_cache_tree_search+0x24/0x95 [btrfs] [] down_read+0x31/0x35 [] find_free_extent+0x2bb/0x828 [btrfs] [] ? __wait_on_bit+0x69/0x7b [] ? wake_bit_function+0x0/0x33 [] btrfs_reserve_extent+0xc8/0x17d [btrfs] [] ? test_range_bit+0x59/0xeb [btrfs] [] btrfs_alloc_free_block+0x5e/0x198 [btrfs] [] __btrfs_cow_block+0x103/0x30d [btrfs] [] ? btrfs_find_ref_cluster+0x35/0x145 [btrfs] [] ? btrfs_header_generation+0x17/0x2c [btrfs] [] btrfs_cow_block+0x101/0x110 [btrfs] [] commit_cowonly_roots+0x59/0x198 [btrfs] [] ? process_timeout+0x0/0x10 [] btrfs_commit_transaction+0x36a/0x603 [btrfs] [] ? autoremove_wake_function+0x0/0x39 [] ? start_transaction+0x122/0x12e [btrfs] [] btrfs_sync_fs+0x65/0x69 [btrfs] [] sync_quota_sb+0x53/0x101 [] __sync_filesystem+0x46/0x77 [] sync_filesystem+0x4b/0x4f [] generic_shutdown_super+0x27/0xc9 [] kill_anon_super+0x16/0x4f [] deactivate_super+0x56/0x6b [] mntput_no_expire+0xb4/0xec [] do_add_mount+0x107/0x117 [] do_mount+0x755/0x793 [] ? alloc_pages_current+0x95/0x9e [] sys_mount+0x88/0xc2 [] system_call_fastpath+0x16/0x1b Code: 0f b7 c8 c1 e8 10 39 c1 74 07 f3 90 0f b7 0f eb f5 48 89 d0 c9 c3 55 48 89 e5 0f 1f 44 00 00 fa 66 66 90 66 66 90 b8 00 00 01 00 0f c1 07 0f b7 d0 c1 e8 10 39 c2 74 07 f3 90 0f b7 17 eb f5 RIP [] _spin_lock_irq+0x15/0x2c RSP CR2: 00000000000000c4 ---[ end trace bd703f7acdf6e999 ]--- On Fri, Mar 5, 2010 at 1:19 PM, Mike Fedyk wrote= : > Hi, > > I get an oops with 2.6.33-0.46.rc8.git1.fc13.x86_64 while trying to > mount a degraded raid1 btrfs filesystem. > > Here are the steps I performed to get to this stage. > > - Install fedora12 btrfs / on sda2 > - mkfs.btrfs -m raid1 -d raid1 /dev/sda7 > - cp -a from sda2 to sda7 > - reboot into sda7 as / > - btrfs-vol -a /dev/sda2 / > - btrfs-vol -b / =C2=A0(system hangs here) > - reboot (boot fails with ctree error) [1] > - boot into fedora 12 recovery cd (based on 2.6.31). =C2=A0after runn= ing > btrfsctl -a, the filesystem is mountable. > - umount > - dd bs=3D1M count=3D2000 < /dev/zero > /dev/sda2 > - mount /dev/sda7, get oops (on 2.6.31) > - install fedora12 btrfs / on sda2 > - update to 2.6.33-0.46.rc8.git1.fc13.x86_64 > - btrfsctl -a > - mount /dev/sda7 (get oops below) > > > 1. Turns out that fedora12 doesn't have a call to btrfsctl -a in the > boot process. =C2=A0Working on a patch for that... > > > > > > > > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.33-0.46.rc8.git1.fc13.x86_64 > (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.4.3 20100211 > (Red Hat 4.4.3-6) (GCC) ) #1 SMP Tue Feb 16 19:47:00 UTC 2010 > Command line: ro root=3DUUID=3D7d23c60c-c072-431d-971a-87bcf61ac6a2 > LANG=3Den_US.UTF-8 SYSFONT=3Dlatarcyrheb-sun16 KEYBOARDTYPE=3Dpc KEYT= ABLE=3Dus > rhgb quiet > BIOS-provided physical RAM map: > =C2=A0BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > =C2=A0BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > =C2=A0BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > =C2=A0BIOS-e820: 0000000000100000 - 00000000afff0000 (usable) > =C2=A0BIOS-e820: 00000000afff0000 - 00000000afff3000 (ACPI NVS) > =C2=A0BIOS-e820: 00000000afff3000 - 00000000b0000000 (ACPI data) > =C2=A0BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved) > =C2=A0BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > =C2=A0BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > =C2=A0BIOS-e820: 0000000100000000 - 0000000140000000 (usable) > NX (Execute Disable) protection: active > DMI 2.3 present. > Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. > e820 update range: 0000000000000000 - 0000000000010000 (usable) =3D=3D= > (reserved) > No AGP bridge found > last_pfn =3D 0x140000 max_arch_pfn =3D 0x400000000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > =C2=A000000-9FFFF write-back > =C2=A0A0000-BFFFF uncachable > =C2=A0C0000-C7FFF write-protect > =C2=A0C8000-FFFFF uncachable > MTRR variable ranges enabled: > =C2=A00 base 0000000000 mask FF80000000 write-back > =C2=A01 base 0080000000 mask FFC0000000 write-back > =C2=A02 base 0100000000 mask FFC0000000 write-back > =C2=A03 disabled > =C2=A04 disabled > =C2=A05 disabled > =C2=A06 disabled > =C2=A07 disabled > TOM2: 0000000140000000 aka 5120M > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > e820 update range: 00000000c0000000 - 0000000100000000 (usable) =3D=3D= > (reserved) > last_pfn =3D 0xafff0 max_arch_pfn =3D 0x400000000 > initial memory mapped : 0 - 20000000 > found SMP MP-table at [ffff8800000f3c90] f3c90 > init_memory_mapping: 0000000000000000-00000000afff0000 > =C2=A00000000000 - 00afe00000 page 2M > =C2=A000afe00000 - 00afff0000 page 4k > kernel direct mapping tables up to afff0000 @ 16000-1b000 > init_memory_mapping: 0000000100000000-0000000140000000 > =C2=A00100000000 - 0140000000 page 2M > kernel direct mapping tables up to 140000000 @ 19000-1f000 > RAMDISK: 37435000 - 37fefbfc > ACPI: RSDP 00000000000f8370 00014 (v00 Nvidia) > ACPI: RSDT 00000000afff3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD = 00000000) > ACPI: FACP 00000000afff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD = 00000000) > ACPI: DSDT 00000000afff3180 0631A (v01 NVIDIA AWRDACPI 00001000 MSFT = 0100000E) > ACPI: FACS 00000000afff0000 00040 > ACPI: SSDT 00000000afff95c0 00248 (v01 PTLTD =C2=A0POWERNOW 00000001 = =C2=A0LTP 00000001) > ACPI: HPET 00000000afff9880 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD = 00000098) > ACPI: MCFG 00000000afff9900 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD = 00000000) > ACPI: APIC 00000000afff9500 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD = 00000000) > ACPI: Local APIC address 0xfee00000 > Scanning NUMA topology in Northbridge 24 > No NUMA configuration found > Faking a node at 0000000000000000-0000000140000000 > Bootmem setup node 0 0000000000000000-0000000140000000 > =C2=A0NODE_DATA [000000000001a000 - 0000000000032fff] > =C2=A0bootmap [0000000000033000 - =C2=A0000000000005afff] pages 28 > (13 early reservations) =3D=3D> bootmem [0000000000 - 0140000000] > =C2=A0#0 [0000000000 - 0000001000] =C2=A0 BIOS data page =3D=3D> [000= 0000000 - 0000001000] > =C2=A0#1 [0001000000 - 00029b9138] =C2=A0 =C2=A0TEXT DATA BSS =3D=3D>= [0001000000 - 00029b9138] > =C2=A0#2 [0037435000 - 0037fefbfc] =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= RAMDISK =3D=3D> [0037435000 - 0037fefbfc] > =C2=A0#3 [00029ba000 - 00029ba0b9] =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= =C2=A0 =C2=A0BRK =3D=3D> [00029ba000 - 00029ba0b9] > =C2=A0#4 [00000f3ca0 - 0000100000] =C2=A0 =C2=A0BIOS reserved =3D=3D>= [00000f3ca0 - 0000100000] > =C2=A0#5 [00000f3c90 - 00000f3ca0] =C2=A0 =C2=A0 MP-table mpf =3D=3D>= [00000f3c90 - 00000f3ca0] > =C2=A0#6 [000009f000 - 00000f1fe4] =C2=A0 =C2=A0BIOS reserved =3D=3D>= [000009f000 - 00000f1fe4] > =C2=A0#7 [00000f2140 - 00000f3c90] =C2=A0 =C2=A0BIOS reserved =3D=3D>= [00000f2140 - 00000f3c90] > =C2=A0#8 [00000f1fe4 - 00000f2140] =C2=A0 =C2=A0 MP-table mpc =3D=3D>= [00000f1fe4 - 00000f2140] > =C2=A0#9 [0000010000 - 0000012000] =C2=A0 =C2=A0 =C2=A0 TRAMPOLINE =3D= =3D> [0000010000 - 0000012000] > =C2=A0#10 [0000012000 - 0000016000] =C2=A0 =C2=A0 =C2=A0ACPI WAKEUP =3D= =3D> [0000012000 - 0000016000] > =C2=A0#11 [0000016000 - 0000019000] =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= PGTABLE =3D=3D> [0000016000 - 0000019000] > =C2=A0#12 [0000019000 - 000001a000] =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= PGTABLE =3D=3D> [0000019000 - 000001a000] > =C2=A0[ffffea0000000000-ffffea00045fffff] PMD -> > [ffff880002a00000-ffff880005ffffff] on node 0 > Zone PFN ranges: > =C2=A0DMA =C2=A0 =C2=A0 =C2=A00x00000010 -> 0x00001000 > =C2=A0DMA32 =C2=A0 =C2=A00x00001000 -> 0x00100000 > =C2=A0Normal =C2=A0 0x00100000 -> 0x00140000 > Movable zone start PFN for each node > early_node_map[3] active PFN ranges > =C2=A0 =C2=A00: 0x00000010 -> 0x0000009f > =C2=A0 =C2=A00: 0x00000100 -> 0x000afff0 > =C2=A0 =C2=A00: 0x00100000 -> 0x00140000 > On node 0 totalpages: 982911 > =C2=A0DMA zone: 56 pages used for memmap > =C2=A0DMA zone: 106 pages reserved > =C2=A0DMA zone: 3821 pages, LIFO batch:0 > =C2=A0DMA32 zone: 14280 pages used for memmap > =C2=A0DMA32 zone: 702504 pages, LIFO batch:31 > =C2=A0Normal zone: 3584 pages used for memmap > =C2=A0Normal zone: 258560 pages, LIFO batch:31 > Detected use of extended apic ids on hypertransport bus > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) > ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > ACPI: IRQ14 used by override. > ACPI: IRQ15 used by override. > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x10de8201 base: 0xfeff0000 > SMP: Allowing 2 CPUs, 0 hotplug CPUs > nr_irqs_gsi: 24 > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > PM: Registered nosave memory: 00000000afff0000 - 00000000afff3000 > PM: Registered nosave memory: 00000000afff3000 - 00000000b0000000 > PM: Registered nosave memory: 00000000b0000000 - 00000000c0000000 > PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000 > PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 > PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 > PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 > Allocating PCI resources starting at c0000000 (gap: c0000000:30000000= ) > Booting paravirtualized kernel on bare hardware > setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_id= s:1 > PERCPU: Embedded 478 pages/cpu @ffff880006200000 s1927384 r8192 d2231= 2 u2097152 > pcpu-alloc: s1927384 r8192 d22312 u2097152 alloc=3D1*2097152 > pcpu-alloc: [0] 0 [0] 1 > Built 1 zonelists in Node order, mobility grouping on. =C2=A0Total pa= ges: 964885 > Policy zone: Normal > Kernel command line: ro root=3DUUID=3D7d23c60c-c072-431d-971a-87bcf61= ac6a2 > =C2=A0LANG=3Den_US.UTF-8 SYSFONT=3Dlatarcyrheb-sun16 KEYBOARDTYPE=3Dp= c > KEYTABLE=3Dus rhgb quiet > PID hash table entries: 4096 (order: 3, 32768 bytes) > Checking aperture... > No AGP bridge found > Node 0: aperture @ 4000000 size 32 MB > Aperture pointing to e820 RAM. Ignoring. > Your BIOS doesn't leave a aperture memory hole > Please enable the IOMMU option in the BIOS setup > This costs you 64 MB of RAM > Mapping aperture over 65536 KB of RAM @ 20000000 > PM: Registered nosave memory: 0000000020000000 - 0000000024000000 > Memory: 3701504k/5242880k available (4608k kernel code, 1311236k > absent, 230140k reserved, 7333k data, 2752k init) > SLUB: Genslabs=3D14, HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D= 2, Nodes=3D1 > Hierarchical RCU implementation. > NR_IRQS:4352 nr_irqs:424 > spurious 8259A interrupt: IRQ7. > Console: colour VGA+ 80x25 > console [tty0] enabled > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Mol= nar > ... MAX_LOCKDEP_SUBCLASSES: =C2=A08 > ... MAX_LOCK_DEPTH: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A048 > ... MAX_LOCKDEP_KEYS: =C2=A0 =C2=A0 =C2=A0 =C2=A08191 > ... CLASSHASH_SIZE: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A04096 > ... MAX_LOCKDEP_ENTRIES: =C2=A0 =C2=A0 16384 > ... MAX_LOCKDEP_CHAINS: =C2=A0 =C2=A0 =C2=A032768 > ... CHAINHASH_SIZE: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A016384 > =C2=A0memory used by lock dependency info: 6367 kB > =C2=A0per task-struct memory footprint: 2688 bytes > allocated 39321600 bytes of page_cgroup > please try 'cgroup_disable=3Dmemory' option if you don't want memory = cgroups > ODEBUG: 11 of 11 active objects replaced > hpet clockevent registered > Fast TSC calibration using PIT > Detected 2310.370 MHz processor. > Calibrating delay loop (skipped), value calculated using timer > frequency.. 4620.74 BogoMIPS (lpj=3D2310370) > Security Framework initialized > SELinux: =C2=A0Initializing. > SELinux: =C2=A0Starting in permissive mode > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys memory > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys net_cls > Initializing cgroup subsys blkio > tseg: 0000000000 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 5 MCE banks > using C1E aware idle routine > Performance Events: AMD PMU driver. > ... version: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A00 > ... bit width: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A048 > ... generic registers: =C2=A0 =C2=A0 =C2=A04 > ... value mask: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 0000fffffff= fffff > ... max period: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 00007ffffff= fffff > ... fixed-purpose events: =C2=A0 0 > ... event mask: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 00000000000= 0000f > ACPI: Core revision 20091214 > ftrace: converting mcount calls to 0f 1f 44 00 00 > ftrace: allocating 21578 entries in 85 pages > Setting APIC routing to flat > ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 > CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 > lockdep: fixing up alternatives. > Booting Node =C2=A0 0, Processors =C2=A0#1 Ok. > Brought up 2 CPUs > Total of 2 processors activated (9241.05 BogoMIPS). > sizeof(vma)=3D176 bytes > sizeof(page)=3D56 bytes > sizeof(inode)=3D1168 bytes > sizeof(dentry)=3D256 bytes > sizeof(ext3inode)=3D1592 bytes > sizeof(buffer_head)=3D104 bytes > sizeof(skbuff)=3D232 bytes > sizeof(task_struct)=3D9272 bytes > devtmpfs: initialized > regulator: core version 0.5 > Time: 22:31:18 =C2=A0Date: 03/03/10 > NET: Registered protocol family 16 > node 0 link 0: io port [7000, ffff] > TOM: 00000000c0000000 aka 3072M > node 0 link 0: mmio [a0000, bffff] > node 0 link 0: mmio [c0000000, efffffff] > node 0 link 0: mmio [f4000000, fe02ffff] > node 0 link 0: mmio [f0000000, f03fffff] > TOM2: 0000000140000000 aka 5120M > bus: [00, 04] on node 0 link 0 > bus: 00 index 0 io port: [0, ffff] > bus: 00 index 1 mmio: [a0000, bffff] > bus: 00 index 2 mmio: [c0000000, f3ffffff] > bus: 00 index 3 mmio: [f4000000, ffffffff] > bus: 00 index 4 mmio: [140000000, fcffffffff] > ACPI: bus type pci registered > PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem > 0xf0000000-0xf3ffffff] (base 0xf0000000) > PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 > PCI: Using configuration type 1 for base access > bio: create slab at 0 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot wit= h > "pci=3Duse_crs" to use them > pci_root PNP0A08:00: host bridge window [io =C2=A00x0000-0x03af] (ign= ored) > pci_root PNP0A08:00: host bridge window [io =C2=A00x03e0-0x0cf7] (ign= ored) > pci_root PNP0A08:00: host bridge window [io =C2=A00x7000-0xffff] (ign= ored) > pci_root PNP0A08:00: host bridge window [io =C2=A00x03b0-0x03df] (ign= ored) > pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (= ignored) > pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff] (= ignored) > pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (= ignored) > pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (= ignored) > pci_root PNP0A08:00: host bridge window [io =C2=A00x4700-0x470b] (ign= ored) > pci_root PNP0A08:00: host bridge window [io =C2=A00x1c00-0x1c7e] inva= lid; > aligning end to 4-byte boundary > pci_root PNP0A08:00: host bridge window [io =C2=A00x1c00-0x1c7f] (ign= ored) > pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (= ignored) > pci 0000:00:01.1: reg 10: [io =C2=A00xfc00-0xfc3f] > pci 0000:00:01.1: reg 20: [io =C2=A00x1c00-0x1c3f] > pci 0000:00:01.1: reg 24: [io =C2=A00xf400-0xf43f] > pci 0000:00:01.1: PME# supported from D3hot D3cold > pci 0000:00:01.1: PME# disabled > pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] > pci 0000:00:02.0: supports D1 D2 > pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.0: PME# disabled > pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] > pci 0000:00:02.1: supports D1 D2 > pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.1: PME# disabled > pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff] > pci 0000:00:05.0: PME# supported from D3hot D3cold > pci 0000:00:05.0: PME# disabled > pci 0000:00:06.0: reg 20: [io =C2=A00xf000-0xf00f] > pci 0000:00:08.0: reg 10: [io =C2=A00x09f0-0x09f7] > pci 0000:00:08.0: reg 14: [io =C2=A00x0bf0-0x0bf3] > pci 0000:00:08.0: reg 18: [io =C2=A00x0970-0x0977] > pci 0000:00:08.0: reg 1c: [io =C2=A00x0b70-0x0b73] > pci 0000:00:08.0: reg 20: [io =C2=A00xdc00-0xdc0f] > pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff] > pci 0000:00:08.1: reg 10: [io =C2=A00x09e0-0x09e7] > pci 0000:00:08.1: reg 14: [io =C2=A00x0be0-0x0be3] > pci 0000:00:08.1: reg 18: [io =C2=A00x0960-0x0967] > pci 0000:00:08.1: reg 1c: [io =C2=A00x0b60-0x0b63] > pci 0000:00:08.1: reg 20: [io =C2=A00xc800-0xc80f] > pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff] > pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:09.0: PME# disabled > pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0b.0: PME# disabled > pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0c.0: PME# disabled > pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff] > pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] > pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] > pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref] > pci 0000:01:05.0: reg 10: [mem 0xfdfe0000-0xfdfeffff] > pci 0000:01:06.0: reg 10: [io =C2=A00xbc00-0xbc07] > pci 0000:01:06.0: reg 14: [io =C2=A00xb800-0xb803] > pci 0000:01:06.0: reg 18: [io =C2=A00xb400-0xb407] > pci 0000:01:06.0: reg 1c: [io =C2=A00xb000-0xb003] > pci 0000:01:06.0: reg 20: [io =C2=A00xac00-0xac0f] > pci 0000:01:06.0: reg 30: [mem 0x00000000-0x0000ffff pref] > pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff] > pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff] > pci 0000:01:09.0: supports D1 D2 > pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot > pci 0000:01:09.0: PME# disabled > pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) > pci 0000:00:04.0: =C2=A0 bridge window [io =C2=A00xa000-0xbfff] > pci 0000:00:04.0: =C2=A0 bridge window [mem 0xfdf00000-0xfdffffff] > pci 0000:00:04.0: =C2=A0 bridge window [mem 0xfd800000-0xfd8fffff pre= f] > pci 0000:00:09.0: PCI bridge to [bus 02-02] > pci 0000:00:09.0: =C2=A0 bridge window [io =C2=A00x9000-0x9fff] > pci 0000:00:09.0: =C2=A0 bridge window [mem 0xfde00000-0xfdefffff] > pci 0000:00:09.0: =C2=A0 bridge window [mem 0xfdd00000-0xfddfffff 64b= it pref] > pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit] > pci 0000:03:00.0: reg 18: [io =C2=A00x8c00-0x8cff] > pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] > pci 0000:03:00.0: supports D1 D2 > pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:03:00.0: PME# disabled > pci 0000:00:0b.0: PCI bridge to [bus 03-03] > pci 0000:00:0b.0: =C2=A0 bridge window [io =C2=A00x8000-0x8fff] > pci 0000:00:0b.0: =C2=A0 bridge window [mem 0xfdc00000-0xfdcfffff] > pci 0000:00:0b.0: =C2=A0 bridge window [mem 0xfdb00000-0xfdbfffff 64b= it pref] > pci 0000:00:0c.0: PCI bridge to [bus 04-04] > pci 0000:00:0c.0: =C2=A0 bridge window [io =C2=A00x7000-0x7fff] > pci 0000:00:0c.0: =C2=A0 bridge window [mem 0xfda00000-0xfdafffff] > pci 0000:00:0c.0: =C2=A0 bridge window [mem 0xfd900000-0xfd9fffff 64b= it pref] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) > ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled= =2E > ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) > ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled= =2E > ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) > ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled= =2E > ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled= =2E > ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) > ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled= =2E > ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled= =2E > ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled= =2E > ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) > ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) > ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled= =2E > ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) > ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 > ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 > ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. > ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 > ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 > ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 > vgaarb: device added: PCI:0000:00:0d.0,decodes=3Dio+mem,owns=3Dio+mem= ,locks=3Dnone > vgaarb: loaded > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: pci_cache_line_size set to 64 bytes > NetLabel: Initializing > NetLabel: =C2=A0domain hash size =3D 128 > NetLabel: =C2=A0protocols =3D UNLABELED CIPSOv4 > NetLabel: =C2=A0unlabeled traffic allowed by default > HPET: 3 timers in total, 0 timers will be used for per-cpu timer > hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 > hpet0: 3 comparators, 32-bit 25.000000 MHz counter > Switching to clocksource hpet > kstop/0 used greatest stack depth: 6424 bytes left > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 15 devices > ACPI: ACPI bus type pnp unregistered > system 00:01: [io =C2=A00x1000-0x107f] has been reserved > system 00:01: [io =C2=A00x1080-0x10ff] has been reserved > system 00:01: [io =C2=A00x1400-0x147f] has been reserved > system 00:01: [io =C2=A00x1480-0x14ff] has been reserved > system 00:01: [io =C2=A00x1800-0x187f] has been reserved > system 00:01: [io =C2=A00x1880-0x18ff] has been reserved > system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved > system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved > system 00:01: [mem 0xb0000000-0xbfffffff] has been reserved > system 00:02: [io =C2=A00x04d0-0x04d1] has been reserved > system 00:02: [io =C2=A00x0800-0x087f] has been reserved > system 00:02: [io =C2=A00x0290-0x0297] has been reserved > system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved > system 00:0e: [mem 0x000d3000-0x000d3fff] has been reserved > system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved > system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved > system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved > system 00:0e: [mem 0xfeff0000-0xfeff00ff] has been reserved > system 00:0e: [mem 0xafff0000-0xafffffff] could not be reserved > system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved > system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved > system 00:0e: [mem 0x00100000-0xaffeffff] could not be reserved > system 00:0e: [mem 0xb0000000-0xbfffffff] has been reserved > system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved > system 00:0e: [mem 0xfee00000-0xfeefffff] has been reserved > system 00:0e: [mem 0xfefff000-0xfeffffff] has been reserved > system 00:0e: [mem 0xfff80000-0xfff80fff] has been reserved > system 00:0e: [mem 0xfff90000-0xfffbffff] has been reserved > system 00:0e: [mem 0xfffed000-0xfffeffff] has been reserved > pci 0000:00:0d.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] > pci 0000:01:06.0: BAR 6: assigned [mem 0xfd800000-0xfd80ffff pref] > pci 0000:00:04.0: PCI bridge to [bus 01-01] > pci 0000:00:04.0: =C2=A0 bridge window [io =C2=A00xa000-0xbfff] > pci 0000:00:04.0: =C2=A0 bridge window [mem 0xfdf00000-0xfdffffff] > pci 0000:00:04.0: =C2=A0 bridge window [mem 0xfd800000-0xfd8fffff pre= f] > pci 0000:00:09.0: PCI bridge to [bus 02-02] > pci 0000:00:09.0: =C2=A0 bridge window [io =C2=A00x9000-0x9fff] > pci 0000:00:09.0: =C2=A0 bridge window [mem 0xfde00000-0xfdefffff] > pci 0000:00:09.0: =C2=A0 bridge window [mem 0xfdd00000-0xfddfffff 64b= it pref] > pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref] > pci 0000:00:0b.0: PCI bridge to [bus 03-03] > pci 0000:00:0b.0: =C2=A0 bridge window [io =C2=A00x8000-0x8fff] > pci 0000:00:0b.0: =C2=A0 bridge window [mem 0xfdc00000-0xfdcfffff] > pci 0000:00:0b.0: =C2=A0 bridge window [mem 0xfdb00000-0xfdbfffff 64b= it pref] > pci 0000:00:0c.0: PCI bridge to [bus 04-04] > pci 0000:00:0c.0: =C2=A0 bridge window [io =C2=A00x7000-0x7fff] > pci 0000:00:0c.0: =C2=A0 bridge window [mem 0xfda00000-0xfdafffff] > pci 0000:00:0c.0: =C2=A0 bridge window [mem 0xfd900000-0xfd9fffff 64b= it pref] > pci 0000:00:04.0: setting latency timer to 64 > pci 0000:00:09.0: setting latency timer to 64 > pci 0000:00:0b.0: setting latency timer to 64 > pci 0000:00:0c.0: setting latency timer to 64 > pci_bus 0000:00: resource 0 [io =C2=A00x0000-0xffff] > pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] > pci_bus 0000:01: resource 0 [io =C2=A00xa000-0xbfff] > pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] > pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref] > pci_bus 0000:01: resource 3 [io =C2=A00x0000-0xffff] > pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff] > pci_bus 0000:02: resource 0 [io =C2=A00x9000-0x9fff] > pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] > pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] > pci_bus 0000:03: resource 0 [io =C2=A00x8000-0x8fff] > pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] > pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] > pci_bus 0000:04: resource 0 [io =C2=A00x7000-0x7fff] > pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff] > pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) > TCP: Hash tables configured (established 524288 bind 65536) > TCP reno registered > UDP hash table entries: 2048 (order: 6, 327680 bytes) > UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) > NET: Registered protocol family 1 > pci 0000:00:00.0: Found enabled HT MSI Mapping > pci 0000:00:00.0: Found enabled HT MSI Mapping > pci 0000:00:00.0: Found enabled HT MSI Mapping > pci 0000:00:00.0: Found enabled HT MSI Mapping > pci 0000:00:00.0: Found enabled HT MSI Mapping > pci 0000:00:00.0: Found enabled HT MSI Mapping > pci 0000:00:00.0: Found enabled HT MSI Mapping > pci 0000:00:0d.0: Boot video device > PCI: CLS 64 bytes, default 64 > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 12010k freed > DMA-API: preallocated 32768 debug entries > DMA-API: debugging enabled by kernel config > PCI-DMA: Disabling AGP. > PCI-DMA: aperture base @ 20000000 size 65536 KB > PCI-DMA: using GART IOMMU. > PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture > Intel PCLMULQDQ-NI instructions are not detected. > audit: initializing netlink socket (disabled) > type=3D2000 audit(1267655479.576:1): initialized > HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > msgmni has been set to 7381 > SELinux: =C2=A0Registering netfilter hooks > cryptomgr_test used greatest stack depth: 5880 bytes left > cryptomgr_test used greatest stack depth: 5688 bytes left > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport 0000:00:09.0: setting latency timer to 64 > =C2=A0alloc irq_desc for 24 on node 0 > =C2=A0alloc kstat_irqs on node 0 > pcieport 0000:00:09.0: irq 24 for MSI/MSI-X > pcieport 0000:00:0b.0: setting latency timer to 64 > =C2=A0alloc irq_desc for 25 on node 0 > =C2=A0alloc kstat_irqs on node 0 > pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X > pcieport 0000:00:0c.0: setting latency timer to 64 > =C2=A0alloc irq_desc for 26 on node 0 > =C2=A0alloc kstat_irqs on node 0 > pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > pci-stub: invalid id string "" > input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/in= put/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > ACPI: Fan [FAN] (on) > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THRM] (39 C) > Non-volatile memory driver v1.3 > Linux agpgart interface v0.103 > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A > 00:08: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A > 00:09: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A > brd: module loaded > loop: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/inp= ut2 > Fixed MDIO Bus: probed > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 > =C2=A0alloc irq_desc for 23 on node 0 > =C2=A0alloc kstat_irqs on node 0 > ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low)= -> IRQ 23 > ehci_hcd 0000:00:02.1: setting latency timer to 64 > ehci_hcd 0000:00:02.1: EHCI Host Controller > ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:02.1: debug port 1 > ehci_hcd 0000:00:02.1: cache line size of 64 is not supported > ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 > ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=3D1d6b, idProduct=3D0002 > usb usb1: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D= 1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.33-0.46.rc8.git1.fc13.x86_64 ehci_h= cd > usb usb1: SerialNumber: 0000:00:02.1 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 10 ports detected > work_for_cpu used greatest stack depth: 4448 bytes left > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 > =C2=A0alloc irq_desc for 22 on node 0 > =C2=A0alloc kstat_irqs on node 0 > ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low)= -> IRQ 22 > ohci_hcd 0000:00:02.0: setting latency timer to 64 > ohci_hcd 0000:00:02.0: OHCI Host Controller > ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 > usb usb2: New USB device found, idVendor=3D1d6b, idProduct=3D0001 > usb usb2: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D= 1 > usb usb2: Product: OHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.33-0.46.rc8.git1.fc13.x86_64 ohci_h= cd > usb usb2: SerialNumber: 0000:00:02.0 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 10 ports detected > uhci_hcd: USB Universal Host Controller Interface driver > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,1= 2 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > rtc_cmos 00:05: RTC can wake from S4 > rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel= @redhat.com > cpuidle: using governor ladder > cpuidle: using governor menu > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > nf_conntrack.acct=3D1 kernel parameter, acct=3D1 nf_conntrack module = option or > sysctl net.netfilter.nf_conntrack_acct=3D1 to enable it. > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > PM: Resume from disk failed. > registered taskstats version 1 > No TPM chip found, activating TPM-bypass! > =C2=A0Magic number: 2:19:552 > pci_link PNP0C0F:03: hash matches > rtc_cmos 00:05: setting system clock to 2010-03-03 22:31:20 UTC (1267= 655480) > Initalizing network drop monitor service > Freeing unused kernel memory: 2752k freed > Write protecting the kernel read-only data: 10240k > Freeing unused kernel memory: 1516k freed > Freeing unused kernel memory: 1832k freed > input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input3 > dracut: dracut-002-13.4.git8f397a9b.fc12 > udev: starting version 145 > [drm] Initialized drm 1.1.0 20060810 > ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21 > =C2=A0alloc irq_desc for 21 on node 0 > =C2=A0alloc kstat_irqs on node 0 > nouveau 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 21 (level, low) = -> IRQ 21 > nouveau 0000:00:0d.0: setting latency timer to 64 > [drm] nouveau 0000:00:0d.0: failed to evaluate _DSM: 5 > [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c00= 0a2) > [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PROM > [drm] nouveau 0000:00:0d.0: ... BIOS signature not found > [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN > [drm] nouveau 0000:00:0d.0: ... appears to be valid > [drm] nouveau 0000:00:0d.0: BIT BIOS found > [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.20 > [drm] nouveau 0000:00:0d.0: BIT table 'd' not found > [drm] nouveau 0000:00:0d.0: Found Display Configuration Block version= 3.0 > [drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2 > [drm] nouveau 0000:00:0d.0: =C2=A0 0: 0x00000000: type 0x00 idx 0 tag= 0xff > [drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023 > [drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 97dd0000 > [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDC= AA > [drm] nouveau 0000:00:0d.0: =3D=3D=3D=3D=3D=3D=3D misaligned reg 0x00= 60081D =3D=3D=3D=3D=3D=3D=3D > [drm] nouveau 0000:00:0d.0: =3D=3D=3D=3D=3D=3D=3D misaligned reg 0x00= 60081D =3D=3D=3D=3D=3D=3D=3D > [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDE= 01 > [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDE= 02 > [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDF= 84 > [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDF= CD > usb 1-8: new high speed USB device using ehci_hcd and address 5 > [TTM] Zone =C2=A0kernel: Available graphics memory: 1892784 kiB. > [drm] nouveau 0000:00:0d.0: 256 MiB VRAM > [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture) > [drm] nouveau 0000:00:0d.0: Allocating FIFO number 0 > [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0 > [drm] nouveau 0000:00:0d.0: Initial CRTC_OWNER is 0 > [drm] nouveau 0000:00:0d.0: Saving VGA fonts > [drm] nouveau 0000:00:0d.0: DCB type 4 not known > [drm] nouveau 0000:00:0d.0: Detected a VGA connector > [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (outpu= t 0) > usb 1-8: New USB device found, idVendor=3D0bda, idProduct=3D0111 > usb 1-8: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D= 3 > usb 1-8: Product: USB2.0-CRW > usb 1-8: Manufacturer: Generic > usb 1-8: SerialNumber: 20021111153705700 > Initializing USB Mass Storage driver... > scsi0 : usb-storage 1-8:1.0 > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > [drm] nouveau 0000:00:0d.0: allocated 1024x768 fb: 0x49000, bo ffff88= 0135040448 > fbcon: nouveaufb (fb0) is primary device > [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (outpu= t 0) > [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using o= utput A > Console: switching to colour frame buffer device 128x48 > fb0: nouveaufb frame buffer device > registered panic notifier > [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:0d.0 on minor 0 > work_for_cpu used greatest stack depth: 3952 bytes left > dracut: Starting plymouth daemon > usb 2-5: new full speed USB device using ohci_hcd and address 2 > input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/i= nput/input4 > usb 2-5: New USB device found, idVendor=3D0fca, idProduct=3D0004 > usb 2-5: New USB device strings: Mfr=3D1, Product=3D5, SerialNumber=3D= 3 > usb 2-5: Product: RIM Composite Device > usb 2-5: Manufacturer: Research In Motion > usb 2-5: SerialNumber: 1879BE860E27CCE2ECBF21BD4E6ADA3C436A38CB > scsi1 : usb-storage 2-5:1.1 > pata_artop 0000:01:06.0: version 0.4.5 > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > =C2=A0alloc irq_desc for 17 on node 0 > =C2=A0alloc kstat_irqs on node 0 > pata_artop 0000:01:06.0: PCI INT A -> Link[APC2] -> GSI 17 (level, > low) -> IRQ 17 > pata_amd 0000:00:06.0: version 0.4.1 > pata_amd 0000:00:06.0: setting latency timer to 64 > scsi2 : pata_artop > scsi3 : pata_amd > scsi5 : pata_amd > scsi4 : pata_artop > ata1: PATA max UDMA/100 cmd 0xbc00 ctl 0xb800 bmdma 0xac00 irq 17 > ata2: PATA max UDMA/100 cmd 0xb400 ctl 0xb000 bmdma 0xac08 irq 17 > ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 > ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 > sata_nv 0000:00:08.0: version 3.5 > ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 > =C2=A0alloc irq_desc for 20 on node 0 > =C2=A0alloc kstat_irqs on node 0 > sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) = -> IRQ 20 > sata_nv 0000:00:08.0: setting latency timer to 64 > scsi6 : sata_nv > scsi7 : sata_nv > ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 20 > ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 20 > ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 > sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) = -> IRQ 23 > sata_nv 0000:00:08.1: setting latency timer to 64 > scsi8 : sata_nv > scsi9 : sata_nv > ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 23 > ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 23 > usb 2-6: new low speed USB device using ohci_hcd and address 3 > ata1.00: ATA-7: Maxtor 6L200P0, BAJ41G20, max UDMA/133 > ata1.00: 398297088 sectors, multi 16: LBA48 > ata1.00: configured for UDMA/100 > scsi 2:0:0:0: Direct-Access =C2=A0 =C2=A0 ATA =C2=A0 =C2=A0 =C2=A0Max= tor 6L200P0 =C2=A0 BAJ4 PQ: 0 ANSI: 5 > sd 2:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB) > sd 2:0:0:0: [sda] Write Protect is off > sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sd 2:0:0:0: Attached scsi generic sg0 type 0 > =C2=A0sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > > sd 2:0:0:0: [sda] Attached SCSI disk > usb 2-6: New USB device found, idVendor=3D045e, idProduct=3D0040 > usb 2-6: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D= 0 > usb 2-6: Product: Microsoft Wheel Mouse Optical=C2=AE > usb 2-6: Manufacturer: Microsoft > ata4: port disabled. ignoring. > input: Microsoft Microsoft Wheel Mouse Optical=C2=AE as > /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5 > generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse > [Microsoft Microsoft Wheel Mouse Optical=C2=AE] on > usb-0000:00:02.0-6/input0 > ata5: SATA link down (SStatus 0 SControl 300) > ata7: SATA link down (SStatus 0 SControl 300) > usb 2-7: new low speed USB device using ohci_hcd and address 4 > ata6: SATA link down (SStatus 0 SControl 300) > usb 2-7: New USB device found, idVendor=3D147a, idProduct=3De00d > usb 2-7: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D= 0 > usb 2-7: Product: IR =C2=A0Receiver > usb 2-7: Manufacturer: Acer > input: Acer IR =C2=A0Receiver as > /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input6 > generic-usb 0003:147A:E00D.0002: input,hiddev96,hidraw1: USB HID v1.1= 0 > Keyboard [Acer IR =C2=A0Receiver] on usb-0000:00:02.0-7/input0 > ata8: SATA link down (SStatus 0 SControl 300) > async/0 used greatest stack depth: 3912 bytes left > Btrfs loaded > device fsid 1d4372c00cc6237d-a2c61af6bc871a97 devid 1 transid 669 /de= v/sda2 > dracut: Mounted root filesystem /dev/sda2 > dracut: Loading SELinux policy > type=3D1404 audit(1267655483.974:2): enforcing=3D1 old_enforcing=3D0 > auid=3D4294967295 ses=3D4294967295 > SELinux: 8192 avtab hash slots, 144734 rules. > SELinux: 8192 avtab hash slots, 144734 rules. > SELinux: =C2=A08 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024= cats > SELinux: =C2=A075 classes, 144734 rules > SELinux: =C2=A0Completing initialization. > SELinux: =C2=A0Setting up existing superblocks. > SELinux: initialized (dev sda2, type btrfs), uses xattr > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev securityfs, type securityfs), uses genfs_co= ntexts > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_cont= exts > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition= SIDs > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_cont= exts > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genf= s_contexts > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition S= IDs > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > type=3D1403 audit(1267655484.977:3): policy loaded auid=3D4294967295 = ses=3D4294967295 > load_policy used greatest stack depth: 2976 bytes left > dracut: Switching root > scsi 0:0:0:0: Direct-Access =C2=A0 =C2=A0 Generic- Compact Flash =C2=A0= =C2=A01.00 PQ: 0 ANSI: 0 CCS > scsi 0:0:0:1: Direct-Access =C2=A0 =C2=A0 Generic- SM/xD-Picture =C2=A0= =C2=A01.00 PQ: 0 ANSI: 0 CCS > scsi 0:0:0:2: Direct-Access =C2=A0 =C2=A0 Generic- SD/MMC =C2=A0 =C2=A0= =C2=A0 =C2=A0 =C2=A0 1.00 PQ: 0 ANSI: 0 CCS > scsi 0:0:0:3: Direct-Access =C2=A0 =C2=A0 Generic- MS/MS-Pro =C2=A0 =C2= =A0 =C2=A0 =C2=A01.00 PQ: 0 ANSI: 0 CCS > sd 0:0:0:0: Attached scsi generic sg1 type 0 > sd 0:0:0:1: Attached scsi generic sg2 type 0 > sd 0:0:0:2: Attached scsi generic sg3 type 0 > sd 0:0:0:0: [sdb] Attached SCSI removable disk > sd 0:0:0:3: Attached scsi generic sg4 type 0 > sd 0:0:0:1: [sdc] Attached SCSI removable disk > sd 0:0:0:2: [sdd] Attached SCSI removable disk > sd 0:0:0:3: [sde] Attached SCSI removable disk > scsi 1:0:0:0: Direct-Access =C2=A0 =C2=A0 RIM =C2=A0 =C2=A0 =C2=A0Bla= ckberry SD =C2=A0 =C2=A00001 PQ: 0 ANSI: 4 CCS > sd 1:0:0:0: Attached scsi generic sg5 type 0 > sd 1:0:0:0: [sdf] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB) > sd 1:0:0:0: [sdf] Write Protect is off > sd 1:0:0:0: [sdf] Mode Sense: 43 00 00 53 > sd 1:0:0:0: [sdf] Assuming drive cache: write through > sd 1:0:0:0: [sdf] Assuming drive cache: write through > =C2=A0sdf: sdf1 > sd 1:0:0:0: [sdf] Assuming drive cache: write through > sd 1:0:0:0: [sdf] Attached SCSI removable disk > udev: starting version 145 > type=3D1400 audit(1267655489.723:4): avc: =C2=A0denied =C2=A0{ mmap_z= ero } for > pid=3D428 comm=3D"vbetool" > scontext=3Dsystem_u:system_r:vbetool_t:s0-s0:c0.c1023 > tcontext=3Dsystem_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=3Dmempro= tect > i2c i2c-1: nForce2 SMBus adapter at 0x1c00 > i2c i2c-2: nForce2 SMBus adapter at 0xf400 > sky2 driver version 1.26 > ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 > =C2=A0alloc irq_desc for 16 on node 0 > =C2=A0alloc kstat_irqs on node 0 > sky2 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> = IRQ 16 > sky2 0000:03:00.0: setting latency timer to 64 > sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2 > =C2=A0alloc irq_desc for 27 on node 0 > =C2=A0alloc kstat_irqs on node 0 > sky2 0000:03:00.0: irq 27 for MSI/MSI-X > sky2 eth0: addr 00:19:21:57:98:36 > EDAC MC: Ver: 2.1.0 Feb 16 2010 > usbcore: registered new interface driver berry_charge > cfg80211: Calling CRDA to update world regulatory domain > parport_pc 00:0a: reported by Plug and Play ACPI > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > EDAC amd64_edac: =C2=A0Ver: 3.3.0 Feb 16 2010 > EDAC amd64: This node reports that Memory ECC is currently disabled, > set F3x44[22] (0000:00:18.3). > EDAC amd64: ECC disabled in the BIOS or no ECC capability, module wil= l not load. > =C2=A0Either enable ECC checking or force module loading by setting > 'ecc_enable_override'. > =C2=A0(Note that use of the override may cause unknown side effects.) > amd64_edac: probe of 0000:00:18.2 failed with error -22 > ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 > =C2=A0alloc irq_desc for 19 on node 0 > =C2=A0alloc kstat_irqs on node 0 > firewire_ohci 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, > low) -> IRQ 19 > firewire_ohci 0000:01:09.0: setting latency timer to 64 > firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI version 1.10 > k8temp 0000:00:18.3: Temperature readouts might be wrong - check erra= tum #141 > ppdev: user-space parallel port driver > firewire_core: created device fw0: GUID 00001921ff14c1cf, S400 > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > ath5k 0000:01:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) ->= IRQ 16 > ath5k 0000:01:05.0: registered as 'phy0' > cfg80211: World regulatory domain updated: > =C2=A0 =C2=A0(start_freq - end_freq @ bandwidth), (max_antenna_gain, = max_eirp) > =C2=A0 =C2=A0(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm) > =C2=A0 =C2=A0(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 = mBm) > =C2=A0 =C2=A0(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 = mBm) > =C2=A0 =C2=A0(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm) > =C2=A0 =C2=A0(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm) > ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 > HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low= ) -> IRQ 22 > =C2=A0alloc irq_desc for 28 on node 0 > =C2=A0alloc kstat_irqs on node 0 > HDA Intel 0000:00:05.0: irq 28 for MSI/MSI-X > HDA Intel 0000:00:05.0: setting latency timer to 64 > ath: EEPROM regdomain: 0x10 > ath: EEPROM indicates we should expect a direct regpair map > ath: Country alpha2 being used: CO > ath: Regpair used: 0x10 > hda_codec: ALC888: BIOS auto-probing. > ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=3D4 > (0x14/0x15/0x16/0x17/0x0) > ALSA sound/pci/hda/hda_codec.c:4288: =C2=A0 =C2=A0speaker_outs=3D0 (0= x0/0x0/0x0/0x0/0x0) > ALSA sound/pci/hda/hda_codec.c:4292: =C2=A0 =C2=A0hp_outs=3D1 (0x1b/0= x0/0x0/0x0/0x0) > ALSA sound/pci/hda/hda_codec.c:4293: =C2=A0 =C2=A0mono: mono_out=3D0x= 0 > ALSA sound/pci/hda/hda_codec.c:4296: =C2=A0 =C2=A0dig-out=3D0x1e/0x0 > ALSA sound/pci/hda/hda_codec.c:4304: =C2=A0 =C2=A0inputs: mic=3D0x18,= fmic=3D0x19, > line=3D0x1a, fline=3D0x0, cd=3D0x0, aux=3D0x1c > ALSA sound/pci/hda/patch_realtek.c:1309: realtek: Enabling init > ASM_ID=3D0xe619 CODEC_ID=3D10ec0888 > phy0: Selected rate control algorithm 'minstrel' > ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) > cfg80211: Calling CRDA for country: CO > cfg80211: Regulatory domain changed to country: CO > =C2=A0 =C2=A0(start_freq - end_freq @ bandwidth), (max_antenna_gain, = max_eirp) > =C2=A0 =C2=A0(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 = mBm) > =C2=A0 =C2=A0(5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 = mBm) > =C2=A0 =C2=A0(5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 = mBm) > =C2=A0 =C2=A0(5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 = mBm) > cfg80211: Calling CRDA for country: US > cfg80211: Regulatory domain changed to country: US > =C2=A0 =C2=A0(start_freq - end_freq @ bandwidth), (max_antenna_gain, = max_eirp) > =C2=A0 =C2=A0(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 = mBm) > =C2=A0 =C2=A0(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 = mBm) > =C2=A0 =C2=A0(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm) > =C2=A0 =C2=A0(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm) > =C2=A0 =C2=A0(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 = mBm) > device-mapper: multipath: version 1.1.1 loaded > EXT4-fs (sda6): mounted filesystem with ordered data mode > SELinux: initialized (dev sda6, type ext4), uses xattr > Adding 1052248k swap on /dev/sda3. =C2=A0Priority:-1 extents:1 across= :1052248k > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_= contexts > powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ > processors (2 cpu cores) (version 2.20.00) > powernow-k8: =C2=A0 =C2=A00 : fid 0xf (2300 MHz), vid 0xa > powernow-k8: =C2=A0 =C2=A01 : fid 0xe (2200 MHz), vid 0xb > powernow-k8: =C2=A0 =C2=A02 : fid 0xc (2000 MHz), vid 0xd > powernow-k8: =C2=A0 =C2=A03 : fid 0xa (1800 MHz), vid 0xf > powernow-k8: =C2=A0 =C2=A04 : fid 0x2 (1000 MHz), vid 0x12 > Clocksource tsc unstable (delta =3D -88295025 ns) > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip6_tables: (C) 2000-2006 Netfilter Core Team > ADDRCONF(NETDEV_UP): wlan0: link is not ready > sky2 eth0: enabling interface > ADDRCONF(NETDEV_UP): eth0: link is not ready > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_co= ntexts > sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [drm] nouveau 0000:00:0d.0: unknown parameter -2401039834048102397 > [drm] nouveau 0000:00:0d.0: Allocating FIFO number 1 > [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 1 > eth0: no IPv6 routers present > fuse init (API version 7.13) > SELinux: initialized (dev fuse, type fuse), uses genfs_contexts > SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts > usb 2-9: new full speed USB device using ohci_hcd and address 5 > usb 2-9: New USB device found, idVendor=3D0d8c, idProduct=3D000c > usb 2-9: New USB device strings: Mfr=3D0, Product=3D0, SerialNumber=3D= 0 > input: HID 0d8c:000c as > /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.3/input/input7 > generic-usb 0003:0D8C:000C.0003: input,hidraw2: USB HID v1.00 Device > [HID 0d8c:000c] on usb-0000:00:02.0-9/input3 > usbcore: registered new interface driver snd-usb-audio > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D > [ INFO: possible circular locking dependency detected ] > 2.6.33-0.46.rc8.git1.fc13.x86_64 #1 > ------------------------------------------------------- > pulseaudio/1760 is trying to acquire lock: > =C2=A0(sysfs_mutex){+.+.+.}, at: [] sysfs_get_diren= t+0x20/0x4a > > but task is already holding lock: > =C2=A0(&pcm->open_mutex){+.+.+.}, at: [] > snd_pcm_release+0x65/0xbd [snd_pcm] > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #2 (&pcm->open_mutex){+.+.+.}: > =C2=A0 =C2=A0 =C2=A0 [] __lock_acquire+0xb87/0xd36 > =C2=A0 =C2=A0 =C2=A0 [] lock_acquire+0xdc/0x102 > =C2=A0 =C2=A0 =C2=A0 [] __mutex_lock_common+0x4b/0x= 392 > =C2=A0 =C2=A0 =C2=A0 [] mutex_lock_nested+0x3e/0x43 > =C2=A0 =C2=A0 =C2=A0 [] snd_pcm_release+0x65/0xbd [= snd_pcm] > =C2=A0 =C2=A0 =C2=A0 [] __fput+0x12a/0x1df > =C2=A0 =C2=A0 =C2=A0 [] fput+0x1a/0x1c > =C2=A0 =C2=A0 =C2=A0 [] remove_vma+0x56/0x8c > =C2=A0 =C2=A0 =C2=A0 [] do_munmap+0x310/0x332 > =C2=A0 =C2=A0 =C2=A0 [] sys_munmap+0x46/0x5d > =C2=A0 =C2=A0 =C2=A0 [] system_call_fastpath+0x16/0= x1b > > -> #1 (&mm->mmap_sem){++++++}: > =C2=A0 =C2=A0 =C2=A0 [] __lock_acquire+0xb87/0xd36 > =C2=A0 =C2=A0 =C2=A0 [] lock_acquire+0xdc/0x102 > =C2=A0 =C2=A0 =C2=A0 [] might_fault+0x89/0xac > =C2=A0 =C2=A0 =C2=A0 [] filldir+0x75/0xd0 > =C2=A0 =C2=A0 =C2=A0 [] sysfs_readdir+0x10f/0x149 > =C2=A0 =C2=A0 =C2=A0 [] vfs_readdir+0x79/0xb6 > =C2=A0 =C2=A0 =C2=A0 [] sys_getdents+0x81/0xd1 > =C2=A0 =C2=A0 =C2=A0 [] system_call_fastpath+0x16/0= x1b > > -> #0 (sysfs_mutex){+.+.+.}: > =C2=A0 =C2=A0 =C2=A0 [] __lock_acquire+0xa31/0xd36 > =C2=A0 =C2=A0 =C2=A0 [] lock_acquire+0xdc/0x102 > =C2=A0 =C2=A0 =C2=A0 [] __mutex_lock_common+0x4b/0x= 392 > =C2=A0 =C2=A0 =C2=A0 [] mutex_lock_nested+0x3e/0x43 > =C2=A0 =C2=A0 =C2=A0 [] sysfs_get_dirent+0x20/0x4a > =C2=A0 =C2=A0 =C2=A0 [] sysfs_remove_group+0x2a/0xc= a > =C2=A0 =C2=A0 =C2=A0 [] dpm_sysfs_remove+0x19/0x1b > =C2=A0 =C2=A0 =C2=A0 [] device_del+0x4c/0x1ab > =C2=A0 =C2=A0 =C2=A0 [] device_unregister+0x34/0x5b > =C2=A0 =C2=A0 =C2=A0 [] usb_remove_ep_devs+0x23/0x2= f > =C2=A0 =C2=A0 =C2=A0 [] remove_intf_ep_devs+0x37/0x= 4d > =C2=A0 =C2=A0 =C2=A0 [] usb_set_interface+0x1cd/0x2= dc > =C2=A0 =C2=A0 =C2=A0 [] snd_usb_capture_close+0x33/= 0x4f [snd_usb_audio] > =C2=A0 =C2=A0 =C2=A0 [] snd_pcm_release_substream+0= x53/0x82 [snd_pcm] > =C2=A0 =C2=A0 =C2=A0 [] snd_pcm_release+0x6d/0xbd [= snd_pcm] > =C2=A0 =C2=A0 =C2=A0 [] __fput+0x12a/0x1df > =C2=A0 =C2=A0 =C2=A0 [] fput+0x1a/0x1c > =C2=A0 =C2=A0 =C2=A0 [] remove_vma+0x56/0x8c > =C2=A0 =C2=A0 =C2=A0 [] do_munmap+0x310/0x332 > =C2=A0 =C2=A0 =C2=A0 [] sys_munmap+0x46/0x5d > =C2=A0 =C2=A0 =C2=A0 [] system_call_fastpath+0x16/0= x1b > > other info that might help us debug this: > > 2 locks held by pulseaudio/1760: > =C2=A0#0: =C2=A0(&mm->mmap_sem){++++++}, at: [] sys= _munmap+0x38/0x5d > =C2=A0#1: =C2=A0(&pcm->open_mutex){+.+.+.}, at: [] > snd_pcm_release+0x65/0xbd [snd_pcm] > > stack backtrace: > Pid: 1760, comm: pulseaudio Not tainted 2.6.33-0.46.rc8.git1.fc13.x86= _64 #1 > Call Trace: > =C2=A0[] print_circular_bug+0xaf/0xbd > =C2=A0[] __lock_acquire+0xa31/0xd36 > =C2=A0[] lock_acquire+0xdc/0x102 > =C2=A0[] ? sysfs_get_dirent+0x20/0x4a > =C2=A0[] ? sched_clock+0x9/0xd > =C2=A0[] ? sched_clock_local+0x1c/0x82 > =C2=A0[] ? sysfs_get_dirent+0x20/0x4a > =C2=A0[] __mutex_lock_common+0x4b/0x392 > =C2=A0[] ? sysfs_get_dirent+0x20/0x4a > =C2=A0[] ? mark_held_locks+0x52/0x70 > =C2=A0[] ? _raw_spin_unlock_irq+0x30/0x3c > =C2=A0[] ? trace_hardirqs_on_caller+0x111/0x135 > =C2=A0[] mutex_lock_nested+0x3e/0x43 > =C2=A0[] sysfs_get_dirent+0x20/0x4a > =C2=A0[] sysfs_remove_group+0x2a/0xca > =C2=A0[] dpm_sysfs_remove+0x19/0x1b > =C2=A0[] device_del+0x4c/0x1ab > =C2=A0[] device_unregister+0x34/0x5b > =C2=A0[] usb_remove_ep_devs+0x23/0x2f > =C2=A0[] remove_intf_ep_devs+0x37/0x4d > =C2=A0[] usb_set_interface+0x1cd/0x2dc > =C2=A0[] snd_usb_capture_close+0x33/0x4f [snd_usb_a= udio] > =C2=A0[] snd_pcm_release_substream+0x53/0x82 [snd_p= cm] > =C2=A0[] snd_pcm_release+0x6d/0xbd [snd_pcm] > =C2=A0[] __fput+0x12a/0x1df > =C2=A0[] fput+0x1a/0x1c > =C2=A0[] remove_vma+0x56/0x8c > =C2=A0[] do_munmap+0x310/0x332 > =C2=A0[] sys_munmap+0x46/0x5d > =C2=A0[] system_call_fastpath+0x16/0x1b > device fsid 3546a1a7a4563c4b-2b1289f58c64988c devid 1 transid 974 /de= v/sda7 > btrfs: failed to read the system array on sda7 > btrfs: open_ctree failed > device fsid 3546a1a7a4563c4b-2b1289f58c64988c devid 1 transid 974 /de= v/sda7 > device fsid 1d4372c00cc6237d-a2c61af6bc871a97 devid 1 transid 679 /de= v/sda2 > device fsid 3546a1a7a4563c4b-2b1289f58c64988c devid 1 transid 974 /de= v/sda7 > btrfs: failed to read the system array on sda7 > btrfs: open_ctree failed > device fsid 3546a1a7a4563c4b-2b1289f58c64988c devid 1 transid 974 /de= v/sda7 > btrfs: allowing degraded mounts > Error searching slot for orphan: -5 > SELinux: (dev sda7, type btrfs) getxattr errno 5 > BUG: unable to handle kernel NULL pointer dereference at 000000000000= 0170 > IP: [] do_raw_spin_trylock+0x4/0x3d > PGD 0 > Oops: 0000 [#1] SMP > last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_fre= q > CPU 1 > Pid: 2172, comm: mount Not tainted 2.6.33-0.46.rc8.git1.fc13.x86_64 #= 1 > EM61SM/EM61PM =C2=A0 =C2=A0 =C2=A0 =C2=A0 /ASE380/AST180/APM8 > RIP: 0010:[] =C2=A0[] > do_raw_spin_trylock+0x4/0x3d > RSP: 0018:ffff88011bf35808 =C2=A0EFLAGS: 00010092 > RAX: 0000000000000000 RBX: 0000000000000170 RCX: 0000000000000000 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000170 > RBP: ffff88011bf35808 R08: 0000000000000002 R09: 0000000000000001 > R10: 0000000000000188 R11: 0000000000000000 R12: 0000000000000188 > R13: 0000000000000296 R14: 0000000000000000 R15: 0000000000000000 > FS: =C2=A000007f559f17e7e0(0000) GS:ffff880006400000(0000) knlGS:0000= 000000000000 > CS: =C2=A00010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 0000000000000170 CR3: 000000011b159000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process mount (pid: 2172, threadinfo ffff88011bf34000, task ffff88011= b198000) > Stack: > =C2=A0ffff88011bf35848 ffffffff81478537 ffffffff8122cf5b 00000009c000= 0000 > <0> ffff88011b1bc0a8 0000000000000170 0000000000000168 ffff880126e6a0= 90 > <0> ffff88011bf35868 ffffffff8122cf5b 0000000000000168 00000000000001= c0 > Call Trace: > =C2=A0[] _raw_spin_lock_irqsave+0x56/0x88 > =C2=A0[] ? __down_read_trylock+0x16/0x4e > =C2=A0[] __down_read_trylock+0x16/0x4e > =C2=A0[] down_read+0x59/0x84 > =C2=A0[] ? find_free_extent+0x2aa/0x872 [btrfs] > =C2=A0[] find_free_extent+0x2aa/0x872 [btrfs] > =C2=A0[] ? trace_hardirqs_on+0xd/0xf > =C2=A0[] ? __bitmap_weight+0x40/0x8f > =C2=A0[] btrfs_reserve_extent+0xc8/0x156 [btrfs] > =C2=A0[] btrfs_alloc_free_block+0x5e/0x1a0 [btrfs] > =C2=A0[] __btrfs_cow_block+0x103/0x34a [btrfs] > =C2=A0[] ? print_lock_contention_bug+0x1b/0xe0 > =C2=A0[] btrfs_cow_block+0x101/0x110 [btrfs] > =C2=A0[] commit_cowonly_roots+0x59/0x198 [btrfs] > =C2=A0[] btrfs_commit_transaction+0x391/0x633 [btrf= s] > =C2=A0[] ? autoremove_wake_function+0x0/0x39 > =C2=A0[] ? start_transaction+0x124/0x130 [btrfs] > =C2=A0[] btrfs_sync_fs+0x65/0x69 [btrfs] > =C2=A0[] sync_quota_sb+0x53/0x108 > =C2=A0[] __sync_filesystem+0x46/0x77 > =C2=A0[] sync_filesystem+0x52/0x56 > =C2=A0[] ? _atomic_dec_and_lock+0x41/0x64 > =C2=A0[] generic_shutdown_super+0x27/0xce > =C2=A0[] kill_anon_super+0x16/0x55 > =C2=A0[] deactivate_locked_super+0x64/0x84 > =C2=A0[] vfs_kern_mount+0x132/0x168 > =C2=A0[] do_kern_mount+0x4d/0xed > =C2=A0[] do_mount+0x787/0x7fe > =C2=A0[] ? alloc_pages_current+0x95/0x9e > =C2=A0[] sys_mount+0x88/0xc2 > =C2=A0[] system_call_fastpath+0x16/0x1b > Code: 5f c9 c3 55 48 89 e5 eb 12 8a 07 ff ca 3a 06 74 04 31 c0 eb 0f > 48 ff c7 48 ff c6 85 d2 75 ea b8 01 00 00 00 c9 c3 90 55 48 89 e5 <8b= > > 07 89 c2 c1 c0 10 39 c2 8d 90 00 00 01 00 75 04 f0 0f b1 17 > RIP =C2=A0[] do_raw_spin_trylock+0x4/0x3d > =C2=A0RSP > CR2: 0000000000000170 > ---[ end trace 78570ae6fbb00237 ]--- > -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" = in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html