* btrfs error after using kernel 3.0-rc1 @ 2011-06-01 6:06 Fajar A. Nugraha 2011-06-01 12:22 ` Fajar A. Nugraha 0 siblings, 1 reply; 5+ messages in thread From: Fajar A. Nugraha @ 2011-06-01 6:06 UTC (permalink / raw) To: linux-btrfs While using btrfs as root on kernel 3.0-rc1, there was some errors (I wasn't able to capture the error) that forced me to do hard reset. Now during startup system drops to busybox shell because it's unable to mount root partition. Is there a way to recover the data, as at least grub2 was still happy enough to load kernel and initrd (both of which located on the same btrfs partition)? This is what dmesg says [ 4.536798] device label SSD-ROOT devid 1 transid 38245 /dev/sda2 [ 9.552086] device label SSD-ROOT devid 1 transid 38245 /dev/disk/by-label/SSD-ROOT [ 9.554563] btrfs: disk space caching is enabled [ 9.564301] parent transid verify failed on 44040192 wanted 38240 found 32526 [ 9.564535] parent transid verify failed on 44040192 wanted 38240 found 32526 [ 9.564778] parent transid verify failed on 44040192 wanted 38240 found 32526 [ 9.575679] parent transid verify failed on 44052480 wanted 38240 found 31547 [ 9.575904] parent transid verify failed on 44052480 wanted 38240 found 31547 [ 9.576176] parent transid verify failed on 44052480 wanted 38240 found 31547 [ 9.586121] parent transid verify failed on 44064768 wanted 38240 found 34145 [ 9.586319] parent transid verify failed on 44064768 wanted 38240 found 34145 [ 9.586515] parent transid verify failed on 44064768 wanted 38240 found 34145 [ 9.587027] parent transid verify failed on 44068864 wanted 38240 found 34476 [ 9.589732] Btrfs detected SSD devices, enabling SSD mode [ 9.592923] block group 29360128 has an wrong amount of free space [ 9.592959] btrfs: failed to load free space cache for block group 29360128 [ 9.601802] ------------[ cut here ]------------ [ 9.601835] kernel BUG at fs/btrfs/inode.c:4582! [ 9.601867] invalid opcode: 0000 [#1] SMP [ 9.601896] Modules linked in: nbd btrfs zlib_deflate libcrc32c i915 drm_kms_helper drm tg3 i2c_algo_bit video ahci libahci [ 9.601983] [ 9.601996] Pid: 319, comm: exe Not tainted 3.0.0-rc1 #2 Hewlett-Packard HP Compaq 2210b/0ABC [ 9.602054] EIP: 0060:[<f89dae88>] EFLAGS: 00010282 CPU: 0 [ 9.602104] EIP is at btrfs_add_link+0x1b8/0x240 [btrfs] [ 9.602140] EAX: ffffffef EBX: f4baeb44 ECX: 0000007d EDX: 0000007c [ 9.602176] ESI: 000000b5 EDI: f4052b44 EBP: f46bbba0 ESP: f46bbb40 [ 9.602212] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 9.602245] Process exe (pid: 319, ti=f46ba000 task=f7052610 task.ti=f46ba000) [ 9.602288] Stack: [ 9.602303] 0000000a f4baeb44 f46bbb83 00000001 000000b5 00000000 f89f58af f46bbba0 [ 9.602359] f89e4910 f46bbb90 00000982 00000000 f4018000 f4563800 f4baea20 f4052b44 [ 9.602415] 7e000001 000002ee 01000000 00000000 00000000 f4444df0 f482f2a0 00000000 [ 9.602471] Call Trace: [ 9.602499] [<f89f58af>] ? unmap_extent_buffer+0xf/0x20 [btrfs] [ 9.602551] [<f89e4910>] ? btrfs_inode_ref_index+0xe0/0xf0 [btrfs] [ 9.602598] [<f8a058e9>] add_inode_ref+0x2d9/0x380 [btrfs] [ 9.602642] [<f8a07216>] replay_one_buffer+0x226/0x2f0 [btrfs] [ 9.602687] [<f8a04859>] walk_down_log_tree+0x1d9/0x370 [btrfs] [ 9.602737] [<f8a04a91>] walk_log_tree+0xa1/0x1c0 [btrfs] [ 9.602778] [<c127712a>] ? radix_tree_lookup+0xa/0x10 [ 9.602823] [<f8a08ec4>] btrfs_recover_log_trees+0x1e4/0x2b0 [btrfs] [ 9.602872] [<f8a06ff0>] ? replay_one_extent+0x6b0/0x6b0 [btrfs] [ 9.602918] [<f89cc311>] open_ctree+0x1261/0x15e0 [btrfs] [ 9.602957] [<c1279389>] ? strlcpy+0x39/0x50 [ 9.604434] [<f89ab692>] btrfs_mount+0x4a2/0x5d0 [btrfs] [ 9.605678] [<c12741ce>] ? ida_get_new_above+0x11e/0x1a0 [ 9.605678] [<c11296aa>] mount_fs+0x3a/0x180 [ 9.605678] [<c10f877f>] ? __alloc_percpu+0xf/0x20 [ 9.605678] [<c113fd8b>] vfs_kern_mount+0x4b/0xa0 [ 9.605678] [<c11402fe>] do_kern_mount+0x3e/0xe0 [ 9.605678] [<c1141ae6>] do_mount+0x596/0x6c0 [ 9.605678] [<c11414a8>] ? copy_mount_options+0xa8/0x110 [ 9.605678] [<c1141f5b>] sys_mount+0x6b/0xa0 [ 9.605678] [<c1524e1f>] sysenter_do_call+0x12/0x28 [ 9.605678] Code: 24 14 8b 45 d0 89 7c 24 08 89 54 24 0c 8b 55 d4 89 0c 24 8b 4d 08 e8 d8 ab fe ff 85 c0 0f 84 e4 fe ff ff 83 c4 54 5b 5e 5f 5d c3 <0f> 0b 8b 55 dc 8d 7d e3 b9 11 00 00 00 8b b2 dc fe ff ff 8b 55 [ 9.605678] EIP: [<f89dae88>] btrfs_add_link+0x1b8/0x240 [btrfs] SS:ESP 0068:f46bbb40 [ 9.622016] ---[ end trace d5d085f53c746e86 ]--- -- Fajar ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: btrfs error after using kernel 3.0-rc1 2011-06-01 6:06 btrfs error after using kernel 3.0-rc1 Fajar A. Nugraha @ 2011-06-01 12:22 ` Fajar A. Nugraha 2011-06-01 21:48 ` Chris Mason 2011-06-02 0:35 ` liubo 0 siblings, 2 replies; 5+ messages in thread From: Fajar A. Nugraha @ 2011-06-01 12:22 UTC (permalink / raw) To: linux-btrfs On Wed, Jun 1, 2011 at 6:06 AM, Fajar A. Nugraha <list@fajar.net> wrote= : > While using btrfs as root on kernel 3.0-rc1, there was some errors (I > wasn't able to capture the error) that forced me to do hard reset. > > Now during startup system drops to busybox shell because it's unable > to mount root partition. > Is there a way to recover the data, as at least grub2 was still happy > enough to load kernel and initrd (both of which located on the same > btrfs partition)? > > This is what dmesg says > > [ =A0 =A04.536798] device label SSD-ROOT devid 1 transid 38245 /dev/s= da2 > [ =A0 =A09.552086] device label SSD-ROOT devid 1 transid 38245 > /dev/disk/by-label/SSD-ROOT > [ =A0 =A09.554563] btrfs: disk space caching is enabled > [ =A0 =A09.564301] parent transid verify failed on 44040192 wanted 38= 240 found 32526 > [ =A0 =A09.564535] parent transid verify failed on 44040192 wanted 38= 240 found 32526 > [ =A0 =A09.564778] parent transid verify failed on 44040192 wanted 38= 240 found 32526 > [ =A0 =A09.575679] parent transid verify failed on 44052480 wanted 38= 240 found 31547 > [ =A0 =A09.575904] parent transid verify failed on 44052480 wanted 38= 240 found 31547 > [ =A0 =A09.576176] parent transid verify failed on 44052480 wanted 38= 240 found 31547 > [ =A0 =A09.586121] parent transid verify failed on 44064768 wanted 38= 240 found 34145 > [ =A0 =A09.586319] parent transid verify failed on 44064768 wanted 38= 240 found 34145 > [ =A0 =A09.586515] parent transid verify failed on 44064768 wanted 38= 240 found 34145 > [ =A0 =A09.587027] parent transid verify failed on 44068864 wanted 38= 240 found 34476 > [ =A0 =A09.589732] Btrfs detected SSD devices, enabling SSD mode > [ =A0 =A09.592923] block group 29360128 has an wrong amount of free s= pace > [ =A0 =A09.592959] btrfs: failed to load free space cache for block g= roup 29360128 =46or anyone who got the same problem, I was finally able to mount the fs using Ubuntu Natty's 2.6.38-8-generic (the one on live CD). Previously I tried using 2.6.38-9-generic and and 3.0-rc1, none works. Now I'm copying the files somewhere else before reinstalling this system. On another note, does anybody know how btrfs allocates ID for subvols? It doesn't seem to reuse deleted subvol's ID. What happens when the last subvol ID is 999? --=20 =46ajar -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" = in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: btrfs error after using kernel 3.0-rc1 2011-06-01 12:22 ` Fajar A. Nugraha @ 2011-06-01 21:48 ` Chris Mason 2011-06-02 1:14 ` Fajar A. Nugraha 2011-06-02 0:35 ` liubo 1 sibling, 1 reply; 5+ messages in thread From: Chris Mason @ 2011-06-01 21:48 UTC (permalink / raw) To: Fajar A. Nugraha; +Cc: linux-btrfs Excerpts from Fajar A. Nugraha's message of 2011-06-01 08:22:40 -0400: > On Wed, Jun 1, 2011 at 6:06 AM, Fajar A. Nugraha <list@fajar.net> wro= te: > > While using btrfs as root on kernel 3.0-rc1, there was some errors = (I > > wasn't able to capture the error) that forced me to do hard reset. > > > > Now during startup system drops to busybox shell because it's unabl= e > > to mount root partition. > > Is there a way to recover the data, as at least grub2 was still hap= py > > enough to load kernel and initrd (both of which located on the same > > btrfs partition)? > > > > This is what dmesg says > > > > [ =C2=A0 =C2=A04.536798] device label SSD-ROOT devid 1 transid 3824= 5 /dev/sda2 > > [ =C2=A0 =C2=A09.552086] device label SSD-ROOT devid 1 transid 3824= 5 > > /dev/disk/by-label/SSD-ROOT > > [ =C2=A0 =C2=A09.554563] btrfs: disk space caching is enabled > > [ =C2=A0 =C2=A09.564301] parent transid verify failed on 44040192 w= anted 38240 found 32526 > > [ =C2=A0 =C2=A09.564535] parent transid verify failed on 44040192 w= anted 38240 found 32526 > > [ =C2=A0 =C2=A09.564778] parent transid verify failed on 44040192 w= anted 38240 found 32526 > > [ =C2=A0 =C2=A09.575679] parent transid verify failed on 44052480 w= anted 38240 found 31547 > > [ =C2=A0 =C2=A09.575904] parent transid verify failed on 44052480 w= anted 38240 found 31547 > > [ =C2=A0 =C2=A09.576176] parent transid verify failed on 44052480 w= anted 38240 found 31547 > > [ =C2=A0 =C2=A09.586121] parent transid verify failed on 44064768 w= anted 38240 found 34145 > > [ =C2=A0 =C2=A09.586319] parent transid verify failed on 44064768 w= anted 38240 found 34145 > > [ =C2=A0 =C2=A09.586515] parent transid verify failed on 44064768 w= anted 38240 found 34145 > > [ =C2=A0 =C2=A09.587027] parent transid verify failed on 44068864 w= anted 38240 found 34476 > > [ =C2=A0 =C2=A09.589732] Btrfs detected SSD devices, enabling SSD m= ode > > [ =C2=A0 =C2=A09.592923] block group 29360128 has an wrong amount o= f free space > > [ =C2=A0 =C2=A09.592959] btrfs: failed to load free space cache for= block group 29360128 >=20 >=20 > For anyone who got the same problem, >=20 > I was finally able to mount the fs using Ubuntu Natty's > 2.6.38-8-generic (the one on live CD). > Previously I tried using 2.6.38-9-generic and and 3.0-rc1, none works= =2E > Now I'm copying the files somewhere else before reinstalling this > system. The tools have a command to zero out the btrfs log tree, that would hav= e allowed you to mount. Do you still have the busted FS? Thanks a lot for this bug report, I'll try to reproduce it. >=20 > On another note, does anybody know how btrfs allocates ID for subvols= ? > It doesn't seem to reuse deleted subvol's ID. What happens when the > last subvol ID is 999? >=20 We don't reuse the ids for subvols or snapshots, but we can have a little less than 2^64 of them. An id can be reused as long as there ar= e no blocks with refs for it in the extent allocation tree, but that need= s to be checked before we reuse it. -chris -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" = in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: btrfs error after using kernel 3.0-rc1 2011-06-01 21:48 ` Chris Mason @ 2011-06-02 1:14 ` Fajar A. Nugraha 0 siblings, 0 replies; 5+ messages in thread From: Fajar A. Nugraha @ 2011-06-02 1:14 UTC (permalink / raw) To: Chris Mason; +Cc: linux-btrfs On Thu, Jun 2, 2011 at 4:48 AM, Chris Mason <chris.mason@oracle.com> wr= ote: > Excerpts from Fajar A. Nugraha's message of 2011-06-01 08:22:40 -0400= : >> On Wed, Jun 1, 2011 at 6:06 AM, Fajar A. Nugraha <list@fajar.net> wr= ote: >> > While using btrfs as root on kernel 3.0-rc1, there was some errors= (I >> > wasn't able to capture the error) that forced me to do hard reset. >> > >> > Now during startup system drops to busybox shell because it's unab= le >> > to mount root partition. >> For anyone who got the same problem, >> >> I was finally able to mount the fs using Ubuntu Natty's >> 2.6.38-8-generic (the one on live CD). > The tools have a command to zero out the btrfs log tree, that would h= ave > allowed you to mount. Do you mean btrfs-zero-log? It's not compiled by default, is it? I didn't know about that until I read another thread that mentions it, and by that time I was already able to mount it. > =A0Do you still have the busted FS? Yup. Made an image, put it in an external disk (which also use btrfs), and created a snapshot. Here's what I get using btrfs-progs-unstable tmp branch: $ btrfsck sda2.img parent transid verify failed on 44040192 wanted 38240 found 32526 parent transid verify failed on 44040192 wanted 38240 found 32526 parent transid verify failed on 44052480 wanted 38240 found 31547 parent transid verify failed on 44052480 wanted 38240 found 31547 parent transid verify failed on 44064768 wanted 38240 found 34145 parent transid verify failed on 44064768 wanted 38240 found 34145 parent transid verify failed on 44068864 wanted 38240 found 34476 parent transid verify failed on 44068864 wanted 38240 found 34476 leaf parent key incorrect 44032000 bad block 44032000 warning, start mismatch 10833383424 10833408000 Aborted $ btrfs-zero-log sda2.img parent transid verify failed on 44040192 wanted 38240 found 32526 parent transid verify failed on 44040192 wanted 38240 found 32526 parent transid verify failed on 44052480 wanted 38240 found 31547 parent transid verify failed on 44052480 wanted 38240 found 31547 parent transid verify failed on 44064768 wanted 38240 found 34145 parent transid verify failed on 44064768 wanted 38240 found 34145 parent transid verify failed on 44068864 wanted 38240 found 34476 parent transid verify failed on 44068864 wanted 38240 found 34476 After that the filesystem is mountable again, although syslog still shows this entry: Jun 2 07:50:26 HP kernel: [ 2095.290057] parent transid verify failed on 44032000 wanted 38240 found 24586 When copying some of the files, these logs appear on syslog (the same logs appear whether I use the image mounted on kernel 2.6.38-9-generic, or the one fixed with btrfs-zero-log): Jun 2 07:50:26 HP kernel: [ 2095.756842] btrfs no csum found for inode 61485 start 743616512 Jun 2 07:50:26 HP kernel: [ 2095.756950] btrfs csum failed ino 61485 extent 23713038336 csum 1645309641 wanted 0 mirror 1 What does "wanted 0" mean here? During the copy of that particular file, the system would consistently lockup at some point (there was no call trace availabe). I was able to copy it with the help of "mount -o nodatasum,ro" and "rsync --append". This particular file also appears undamaged (it's a Virtualbox disk image, and the OS & application on it ran fine). It'd be great if we can find out what's causing these errors, but for the time being I'm happy enough to get my data back :D Thanks, =46ajar -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" = in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: btrfs error after using kernel 3.0-rc1 2011-06-01 12:22 ` Fajar A. Nugraha 2011-06-01 21:48 ` Chris Mason @ 2011-06-02 0:35 ` liubo 1 sibling, 0 replies; 5+ messages in thread From: liubo @ 2011-06-02 0:35 UTC (permalink / raw) To: Fajar A. Nugraha; +Cc: linux-btrfs On 06/01/2011 08:22 PM, Fajar A. Nugraha wrote: > On Wed, Jun 1, 2011 at 6:06 AM, Fajar A. Nugraha <list@fajar.net> wrote: >> While using btrfs as root on kernel 3.0-rc1, there was some errors (I >> wasn't able to capture the error) that forced me to do hard reset. >> >> Now during startup system drops to busybox shell because it's unable >> to mount root partition. >> Is there a way to recover the data, as at least grub2 was still happy >> enough to load kernel and initrd (both of which located on the same >> btrfs partition)? >> >> This is what dmesg says >> >> [ 4.536798] device label SSD-ROOT devid 1 transid 38245 /dev/sda2 >> [ 9.552086] device label SSD-ROOT devid 1 transid 38245 >> /dev/disk/by-label/SSD-ROOT >> [ 9.554563] btrfs: disk space caching is enabled >> [ 9.564301] parent transid verify failed on 44040192 wanted 38240 found 32526 >> [ 9.564535] parent transid verify failed on 44040192 wanted 38240 found 32526 >> [ 9.564778] parent transid verify failed on 44040192 wanted 38240 found 32526 >> [ 9.575679] parent transid verify failed on 44052480 wanted 38240 found 31547 >> [ 9.575904] parent transid verify failed on 44052480 wanted 38240 found 31547 >> [ 9.576176] parent transid verify failed on 44052480 wanted 38240 found 31547 >> [ 9.586121] parent transid verify failed on 44064768 wanted 38240 found 34145 >> [ 9.586319] parent transid verify failed on 44064768 wanted 38240 found 34145 >> [ 9.586515] parent transid verify failed on 44064768 wanted 38240 found 34145 >> [ 9.587027] parent transid verify failed on 44068864 wanted 38240 found 34476 >> [ 9.589732] Btrfs detected SSD devices, enabling SSD mode >> [ 9.592923] block group 29360128 has an wrong amount of free space >> [ 9.592959] btrfs: failed to load free space cache for block group 29360128 > > > For anyone who got the same problem, > > I was finally able to mount the fs using Ubuntu Natty's > 2.6.38-8-generic (the one on live CD). > Previously I tried using 2.6.38-9-generic and and 3.0-rc1, none works. > Now I'm copying the files somewhere else before reinstalling this > system. > > On another note, does anybody know how btrfs allocates ID for subvols? > It doesn't seem to reuse deleted subvol's ID. What happens when the > last subvol ID is 999? > Yes, no reuse. a new subvol will be 1000, one large than 999. thanks, liubo ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-06-02 1:14 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-06-01 6:06 btrfs error after using kernel 3.0-rc1 Fajar A. Nugraha 2011-06-01 12:22 ` Fajar A. Nugraha 2011-06-01 21:48 ` Chris Mason 2011-06-02 1:14 ` Fajar A. Nugraha 2011-06-02 0:35 ` liubo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).