linux-btrfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anand Jain <anand.jain@oracle.com>
To: "dsterba@suse.com" <dsterba@suse.com>
Cc: Su Yue <l@damenly.su>, linux-btrfs@vger.kernel.org
Subject: Re: [PATCH v2] btrfs: fix lockdep warning while mounting sprout fs
Date: Sat, 6 Mar 2021 16:37:19 +0800	[thread overview]
Message-ID: <b0caf058-3bb5-2ceb-d1d4-d352deee636e@oracle.com> (raw)
In-Reply-To: <23a8830f3be500995e74b45f18862e67c0634c3d.1614793362.git.anand.jain@oracle.com>


David,

  Ping?

Thanks, Anand


On 04/03/2021 02:10, Anand Jain wrote:
> Following test case reproduces lockdep warning.
> 
> Test case:
> DEV1=/dev/vdb
> DEV2=/dev/vdc
> umount /btrfs
> run mkfs.btrfs -f $DEV1
> run btrfstune -S 1 $DEV1
> run mount $DEV1 /btrfs
> run btrfs device add $DEV2 /btrfs -f
> run umount /btrfs
> run mount $DEV2 /btrfs
> run umount /btrfs
> 
> The warning claims a possible ABBA deadlock between the threads initiated by
> [#1] btrfs device add and [#0] the mount.
> 
> ======================================================
> [ 540.743122] WARNING: possible circular locking dependency detected
> [ 540.743129] 5.11.0-rc7+ #5 Not tainted
> [ 540.743135] ------------------------------------------------------
> [ 540.743142] mount/2515 is trying to acquire lock:
> [ 540.743149] ffffa0c5544c2ce0 (&fs_devs->device_list_mutex){+.+.}-{4:4}, at: clone_fs_devices+0x6d/0x210 [btrfs]
> [ 540.743458] but task is already holding lock:
> [ 540.743461] ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs]
> [ 540.743541] which lock already depends on the new lock.
> [ 540.743543] the existing dependency chain (in reverse order) is:
> 
> [ 540.743546] -> #1 (btrfs-chunk-00){++++}-{4:4}:
> [ 540.743566] down_read_nested+0x48/0x2b0
> [ 540.743585] __btrfs_tree_read_lock+0x32/0x200 [btrfs]
> [ 540.743650] btrfs_read_lock_root_node+0x70/0x200 [btrfs]
> [ 540.743733] btrfs_search_slot+0x6c6/0xe00 [btrfs]
> [ 540.743785] btrfs_update_device+0x83/0x260 [btrfs]
> [ 540.743849] btrfs_finish_chunk_alloc+0x13f/0x660 [btrfs] <--- device_list_mutex
> [ 540.743911] btrfs_create_pending_block_groups+0x18d/0x3f0 [btrfs]
> [ 540.743982] btrfs_commit_transaction+0x86/0x1260 [btrfs]
> [ 540.744037] btrfs_init_new_device+0x1600/0x1dd0 [btrfs]
> [ 540.744101] btrfs_ioctl+0x1c77/0x24c0 [btrfs]
> [ 540.744166] __x64_sys_ioctl+0xe4/0x140
> [ 540.744170] do_syscall_64+0x4b/0x80
> [ 540.744174] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> 
> [ 540.744180] -> #0 (&fs_devs->device_list_mutex){+.+.}-{4:4}:
> [ 540.744184] __lock_acquire+0x155f/0x2360
> [ 540.744188] lock_acquire+0x10b/0x5c0
> [ 540.744190] __mutex_lock+0xb1/0xf80
> [ 540.744193] mutex_lock_nested+0x27/0x30
> [ 540.744196] clone_fs_devices+0x6d/0x210 [btrfs]
> [ 540.744270] btrfs_read_chunk_tree+0x3c7/0xbb0 [btrfs]
> [ 540.744336] open_ctree+0xf6e/0x2074 [btrfs]
> [ 540.744406] btrfs_mount_root.cold.72+0x16/0x127 [btrfs]
> [ 540.744472] legacy_get_tree+0x38/0x90
> [ 540.744475] vfs_get_tree+0x30/0x140
> [ 540.744478] fc_mount+0x16/0x60
> [ 540.744482] vfs_kern_mount+0x91/0x100
> [ 540.744484] btrfs_mount+0x1e6/0x670 [btrfs]
> [ 540.744536] legacy_get_tree+0x38/0x90
> [ 540.744537] vfs_get_tree+0x30/0x140
> [ 540.744539] path_mount+0x8d8/0x1070
> [ 540.744541] do_mount+0x8d/0xc0
> [ 540.744543] __x64_sys_mount+0x125/0x160
> [ 540.744545] do_syscall_64+0x4b/0x80
> [ 540.744547] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> 
> [ 540.744551] other info that might help us debug this:
> [ 540.744552] Possible unsafe locking scenario:
> 
> [ 540.744553] CPU0 				CPU1
> [ 540.744554] ---- 				----
> [ 540.744555] lock(btrfs-chunk-00);
> [ 540.744557] 					lock(&fs_devs->device_list_mutex);
> [ 540.744560] 					lock(btrfs-chunk-00);
> [ 540.744562] lock(&fs_devs->device_list_mutex);
> [ 540.744564]
>   *** DEADLOCK ***
> 
> [ 540.744565] 3 locks held by mount/2515:
> [ 540.744567] #0: ffffa0c56bf7a0e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.isra.16+0xdf/0x450
> [ 540.744574] #1: ffffffffc05a9628 (uuid_mutex){+.+.}-{4:4}, at: btrfs_read_chunk_tree+0x63/0xbb0 [btrfs]
> [ 540.744640] #2: ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs]
> [ 540.744708]
>   stack backtrace:
> [ 540.744712] CPU: 2 PID: 2515 Comm: mount Not tainted 5.11.0-rc7+ #5
> 
> 
> But the device_list_mutex in clone_fs_devices() is redundant, as explained
> below.
> Two threads [1]  and [2] (below) could lead to clone_fs_device().
> 
> [1]
> open_ctree <== mount sprout fs
>   btrfs_read_chunk_tree()
>    mutex_lock(&uuid_mutex) <== global lock
>    read_one_dev()
>     open_seed_devices()
>      clone_fs_devices() <== seed fs_devices
>       mutex_lock(&orig->device_list_mutex) <== seed fs_devices
> 
> [2]
> btrfs_init_new_device() <== sprouting
>   mutex_lock(&uuid_mutex); <== global lock
>   btrfs_prepare_sprout()
>     lockdep_assert_held(&uuid_mutex)
>     clone_fs_devices(seed_fs_device) <== seed fs_devices
> 
> Both of these threads hold uuid_mutex which is sufficient to protect
> getting the seed device(s) freed while we are trying to clone it for
> sprouting [2] or mounting a sprout [1] (as above). A mounted seed
> device can not free/write/replace because it is read-only. An unmounted
> seed device can free by btrfs_free_stale_devices(), but it needs uuid_mutex.
> So this patch removes the unnecessary device_list_mutex in clone_fs_devices().
> And adds a lockdep_assert_held(&uuid_mutex) in clone_fs_devices().
> 
> Reported-by: Su Yue <l@damenly.su>
> Signed-off-by: Anand Jain <anand.jain@oracle.com>
> ---
> v2: Remove Martin's Reported-by and Tested-by.
>      Add Su's Reported-by.
>      Add lockdep_assert_held check.
>      Update the changelog, make it relevant to the current misc-next
> 
>   fs/btrfs/volumes.c | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
> index bc3b33efddc5..4188edbad2ef 100644
> --- a/fs/btrfs/volumes.c
> +++ b/fs/btrfs/volumes.c
> @@ -570,6 +570,8 @@ static int btrfs_free_stale_devices(const char *path,
>   	struct btrfs_device *device, *tmp_device;
>   	int ret = 0;
>   
> +	lockdep_assert_held(&uuid_mutex);
> +
>   	if (path)
>   		ret = -ENOENT;
>   
> @@ -1000,11 +1002,12 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
>   	struct btrfs_device *orig_dev;
>   	int ret = 0;
>   
> +	lockdep_assert_held(&uuid_mutex);
> +
>   	fs_devices = alloc_fs_devices(orig->fsid, NULL);
>   	if (IS_ERR(fs_devices))
>   		return fs_devices;
>   
> -	mutex_lock(&orig->device_list_mutex);
>   	fs_devices->total_devices = orig->total_devices;
>   
>   	list_for_each_entry(orig_dev, &orig->devices, dev_list) {
> @@ -1036,10 +1039,8 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
>   		device->fs_devices = fs_devices;
>   		fs_devices->num_devices++;
>   	}
> -	mutex_unlock(&orig->device_list_mutex);
>   	return fs_devices;
>   error:
> -	mutex_unlock(&orig->device_list_mutex);
>   	free_fs_devices(fs_devices);
>   	return ERR_PTR(ret);
>   }
> 


  reply	other threads:[~2021-03-06  8:45 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-03 18:10 [PATCH v2] btrfs: fix lockdep warning while mounting sprout fs Anand Jain
2021-03-06  8:37 ` Anand Jain [this message]
2021-04-05  8:38   ` Anand Jain
2021-04-05  9:18     ` Su Yue
2021-04-05  9:30       ` Anand Jain
2021-04-06 16:48       ` David Sterba
2021-04-06 23:01         ` Anand Jain
2021-04-07  8:24         ` Su Yue
2021-06-21 15:52 ` Anand Jain
2021-08-23 11:00   ` Anand Jain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b0caf058-3bb5-2ceb-d1d4-d352deee636e@oracle.com \
    --to=anand.jain@oracle.com \
    --cc=dsterba@suse.com \
    --cc=l@damenly.su \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).