* unable to mount multi disk volume with recovery mode
@ 2015-09-04 20:45 Ivan Petrovic
2015-09-04 21:13 ` Ivan
2015-09-14 6:25 ` Qu Wenruo
0 siblings, 2 replies; 13+ messages in thread
From: Ivan Petrovic @ 2015-09-04 20:45 UTC (permalink / raw)
To: linux-btrfs@vger.kernel.org
Hello,
I had 3 HDDs in single mode and one died. I have put a replacement but
I can't figure out how to mount recovery or degraded filesystem. First
and third partitions was sdb and sdc and I'm trying to replace second
with new hdd /dev/sdd
ivan@ipplus-dev:~$ uname -a
Linux ipplus-dev 3.13.0-63-generic #103-Ubuntu SMP Fri Aug 14 21:42:59
UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
ivan@ipplus-dev:~$ btrfs --version
Btrfs v3.12
ivan@ipplus-dev:~$ sudo btrfs device scan
Scanning for Btrfs filesystems
ivan@ipplus-dev:~$ sudo btrfs fi show
Label: none uuid: be4138ff-0dd9-48ed-9408-9dd679d4cc0b
Total devices 1 FS bytes used 109.43GiB
devid 1 size 111.79GiB used 111.79GiB path /dev/sda1
Label: none uuid: 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
Total devices 3 FS bytes used 4.50TiB
devid 1 size 1.82TiB used 1.82TiB path /dev/sdb
devid 3 size 1.82TiB used 900.00GiB path /dev/sdc
*** Some devices missing
Btrfs v3.12
ivan@ipplus-dev:~$
Now I try to mount first partition in recovery but third partition
showing open_ctree failed in dmesg.
ivan@ipplus-dev:~$ sudo mount -o recovery,ro -t btrfs /dev/sdb /mnt/ambis/
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error
Некада се корисне информације могу наћи у syslog - покушајте са
dmesg | tail или нечим сличним
ivan@ipplus-dev:~$ dmesg | tail
[ 55.865624] type=1400 audit(1441394241.545:64): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=5569 comm="apparmor_parser"
[ 55.865628] type=1400 audit(1441394241.545:65): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/sbin/cupsd" pid=5569 comm="apparmor_parser"
[ 55.865896] type=1400 audit(1441394241.545:66): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/sbin/cupsd" pid=5569 comm="apparmor_parser"
[ 92.429625] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 1 transid 34755 /dev/sdb
[ 92.429906] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 3 transid 34755 /dev/sdc
[ 182.527543] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 1 transid 34755 /dev/sdb
[ 182.528283] btrfs: enabling auto recovery
[ 182.528287] btrfs: disk space caching is enabled
[ 182.529404] btrfs: failed to read the system array on sdc
[ 182.545306] btrfs: open_ctree failed
Degraded mount showing the same
ivan@ipplus-dev:~$ sudo mount -o degraded -t btrfs /dev/sdb /mnt/ambis/
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error
Некада се корисне информације могу наћи у syslog - покушајте са
dmesg | tail или нечим сличним
ivan@ipplus-dev:~$ dmesg | tail
[ 182.529404] btrfs: failed to read the system array on sdc
[ 182.545306] btrfs: open_ctree failed
[ 437.838712] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 1 transid 34755 /dev/sdb
[ 437.839023] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 3 transid 34755 /dev/sdc
[ 655.529281] systemd-hostnamed[6532]: Warning: nss-myhostname is not
installed. Changing the local hostname might make it unresolveable.
Please install nss-myhostname!
[ 850.636389] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 1 transid 34755 /dev/sdb
[ 850.637131] btrfs: allowing degraded mounts
[ 850.637135] btrfs: disk space caching is enabled
[ 858.980371] Btrfs: too many missing devices, writeable mount is not allowed
[ 859.007281] btrfs: open_ctree failed
What I need to replace missing drive with new
dmesg.log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-63-generic (buildd@lgw01-18) (gcc
version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #103-Ubuntu SMP Fri Aug 14
21:42:59 UTC 2015 (Ubuntu 3.13.0-63.103-generic 3.13.11-ckt25)
[ 0.000000] Command line:
BOOT_IMAGE=/boot/vmlinuz-3.13.0-63-generic
root=UUID=be4138ff-0dd9-48ed-9408-9dd679d4cc0b ro quiet splash
vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000cc3c0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc3c1000-0x00000000ccac1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccac2000-0x00000000ccad2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ccad3000-0x00000000ccbf9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccbfa000-0x00000000cd80dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd80e000-0x00000000cd80efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd80f000-0x00000000cd851fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd852000-0x00000000cdc77fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cdc78000-0x00000000cdff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z77-M,
BIOS 1806 01/03/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0CF000000 mask FFF000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 16110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 16894MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f]
mapped at [ffff8800000fd810]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
[ 0.000000] [mem 0x41fc00000-0x41fdfffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fbfffff]
[ 0.000000] [mem 0x41c000000-0x41fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xcc3c0fff]
[ 0.000000] [mem 0x40200000-0xcc1fffff] page 2M
[ 0.000000] [mem 0xcc200000-0xcc3c0fff] page 4k
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcd80e000-0xcd80efff]
[ 0.000000] [mem 0xcd80e000-0xcd80efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcd852000-0xcdc77fff]
[ 0.000000] [mem 0xcd852000-0xcd9fffff] page 4k
[ 0.000000] [mem 0xcda00000-0xcdbfffff] page 2M
[ 0.000000] [mem 0xcdc00000-0xcdc77fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcdff4000-0xcdffffff]
[ 0.000000] [mem 0xcdff4000-0xcdffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x34af2000-0x36570fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000ccac5080 000074 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ccad0328 00010C (v05 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ccac5188 00B19E (v02 ALASKA A M I
00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000ccbf8080 000040
[ 0.000000] ACPI: APIC 00000000ccad0438 000092 (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000ccad04d0 000044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000ccad0518 00003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ccad0558 0007CA (v01 Intel_ AoacTabl
00001000 INTL 20091112)
[ 0.000000] ACPI: HPET 00000000ccad0d28 000038 (v01 ALASKA A M I
01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000ccad0d60 00036D (v01 SataRe SataTabl
00001000 INTL 20091112)
[ 0.000000] ACPI: DMAR 00000000ccad24e8 0000B8 (v01 INTEL SNB
00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000ccad1128 000926 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000ccad1a50 000A92 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fdfffff]
[ 0.000000] NODE_DATA [mem 0x41fdea000-0x41fdeefff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD ->
[ffff88040f800000-ffff88041f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xcc3c0fff]
[ 0.000000] node 0: [mem 0xcd80e000-0xcd80efff]
[ 0.000000] node 0: [mem 0xcd852000-0xcdc77fff]
[ 0.000000] node 0: [mem 0xcdff4000-0xcdffffff]
[ 0.000000] node 0: [mem 0x100000000-0x41fdfffff]
[ 0.000000] On node 0 totalpages: 4112784
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13008 pages used for memmap
[ 0.000000] DMA32 zone: 832500 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc3c1000-0xccac1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccac2000-0xccad2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccad3000-0xccbf9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccbfa000-0xcd80dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd80f000-0xcd851fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdc78000-0xcdff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041fa00000 s81536
r8192 d20864 u262144
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 4048364
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.13.0-63-generic
root=UUID=be4138ff-0dd9-48ed-9408-9dd679d4cc0b ro quiet splash
vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16081784K/16451136K available (7395K kernel
code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 369352K
reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 66060288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2808.402 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated
using timer frequency.. 5616.80 BogoMIPS (lpj=11233608)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000043] AppArmor: AppArmor initialized
[ 0.000044] Yama: becoming mindful.
[ 0.000997] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.003802] Inode-cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.005017] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.005034] Mountpoint-cache hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.005230] Initializing cgroup subsys memory
[ 0.005235] Initializing cgroup subsys devices
[ 0.005236] Initializing cgroup subsys freezer
[ 0.005237] Initializing cgroup subsys blkio
[ 0.005239] Initializing cgroup subsys perf_event
[ 0.005240] Initializing cgroup subsys hugetlb
[ 0.005258] CPU: Physical Processor ID: 0
[ 0.005259] CPU: Processor Core ID: 0
[ 0.005263] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005263] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005265] mce: CPU supports 9 MCE banks
[ 0.005277] CPU0: Thermal monitoring enabled (TM1)
[ 0.005282] process: using mwait in idle threads
[ 0.005285] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.005285] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.005285] tlb_flushall_shift: 5
[ 0.005378] Freeing SMP alternatives memory: 32K (ffffffff81e6e000
- ffffffff81e76000)
[ 0.006648] ACPI: Core revision 20131115
[ 0.011392] ACPI: All ACPI Tables successfully acquired
[ 0.013607] ftrace: allocating 28590 entries in 112 pages
[ 0.025852] dmar: Host address width 36
[ 0.025854] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.025860] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
c0000020e60262 ecap f0101a
[ 0.025862] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.025866] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap
c9008020660262 ecap f0105a
[ 0.025867] dmar: RMRR base: 0x000000cca44000 end: 0x000000cca55fff
[ 0.025868] dmar: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[ 0.025938] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.025939] HPET id 0 under DRHD base 0xfed91000
[ 0.026096] Enabled IRQ remapping in x2apic mode
[ 0.026097] Enabling x2apic
[ 0.026098] Enabled x2apic
[ 0.026102] Switched APIC routing to cluster x2apic.
[ 0.026510] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066235] smpboot: CPU0: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz
(fam: 06, model: 2a, stepping: 07)
[ 0.066241] TSC deadline timer enabled
[ 0.066249] Performance Events: PEBS fmt1+, 16-deep LBR,
SandyBridge events, full-width counters, Intel PMU driver.
[ 0.066256] ... version: 3
[ 0.066256] ... bit width: 48
[ 0.066257] ... generic registers: 4
[ 0.066258] ... value mask: 0000ffffffffffff
[ 0.066259] ... max period: 0000ffffffffffff
[ 0.066260] ... fixed-purpose events: 3
[ 0.066261] ... event mask: 000000070000000f
[ 0.067661] x86: Booting SMP configuration:
[ 0.080783] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.067662] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.159568] x86: Booted up 1 node, 8 CPUs
[ 0.159572] smpboot: Total of 8 processors activated (44934.43 BogoMIPS)
[ 0.167180] devtmpfs: initialized
[ 0.169776] EVM: security.selinux
[ 0.169777] EVM: security.SMACK64
[ 0.169778] EVM: security.ima
[ 0.169779] EVM: security.capability
[ 0.169815] PM: Registering ACPI NVS region [mem
0xccad3000-0xccbf9fff] (1208320 bytes)
[ 0.169831] PM: Registering ACPI NVS region [mem
0xcd80f000-0xcd851fff] (274432 bytes)
[ 0.170500] pinctrl core: initialized pinctrl subsystem
[ 0.170547] regulator-dummy: no parameters
[ 0.170576] RTC time: 19:16:25, date: 09/04/15
[ 0.170603] NET: Registered protocol family 16
[ 0.170688] cpuidle: using governor ladder
[ 0.170689] cpuidle: using governor menu
[ 0.170718] ACPI FADT declares the system doesn't support PCIe
ASPM, so disable it
[ 0.170720] ACPI: bus type PCI registered
[ 0.170721] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.170766] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.170768] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.176760] PCI: Using configuration type 1 for base access
[ 0.177601] bio: create slab <bio-0> at 0
[ 0.177722] ACPI: Added _OSI(Module Device)
[ 0.177723] ACPI: Added _OSI(Processor Device)
[ 0.177724] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.177725] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.180282] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.183313] ACPI: SSDT 00000000cca6f018 00083B (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.183607] ACPI: Dynamic OEM Table Load:
[ 0.183609] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.187225] ACPI: SSDT 00000000cca70a98 000303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.187539] ACPI: Dynamic OEM Table Load:
[ 0.187541] ACPI: SSDT (null) 000303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.191098] ACPI: SSDT 00000000cca71c18 000119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.191384] ACPI: Dynamic OEM Table Load:
[ 0.191385] ACPI: SSDT (null) 000119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.195990] ACPI: Interpreter enabled
[ 0.195995] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1_] (20131115/hwxface-580)
[ 0.195999] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20131115/hwxface-580)
[ 0.196010] ACPI: (supports S0 S3 S4 S5)
[ 0.196011] ACPI: Using IOAPIC for interrupt routing
[ 0.196034] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.196166] ACPI: No dock devices found.
[ 0.201183] ACPI: Power Resource [FN00] (off)
[ 0.201245] ACPI: Power Resource [FN01] (off)
[ 0.201304] ACPI: Power Resource [FN02] (off)
[ 0.201362] ACPI: Power Resource [FN03] (off)
[ 0.201422] ACPI: Power Resource [FN04] (off)
[ 0.201930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.201935] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.202106] acpi PNP0A08:00: _OSC: platform does not support
[PCIeHotplug PME]
[ 0.202211] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.202212] acpi PNP0A08:00: FADT indicates ASPM is unsupported,
using BIOS configuration
[ 0.202703] PCI host bridge to bus 0000:00
[ 0.202705] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.202707] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.202709] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.202710] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.202712] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.202713] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.202714] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.202716] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.202717] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.202718] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.202720] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 0.202726] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.202802] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.202828] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.202868] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.202896] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.202905] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.202910] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.202914] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.203002] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.203027] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.203096] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.203139] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.203166] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.203188] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
[ 0.203259] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.203336] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.203357] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
[ 0.203444] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.203499] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.203527] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.203541] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.203606] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.203652] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.203680] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.203808] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.203864] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.203892] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[ 0.203968] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.204015] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.204039] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.204115] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.204162] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.204190] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.204210] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
[ 0.204298] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.204352] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.204379] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[ 0.204542] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.204559] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.204566] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.204573] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.204580] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.204587] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.204594] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
[ 0.204637] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.204698] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.204712] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
[ 0.204732] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.204829] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.204911] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.205001] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.205021] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.205054] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff
64bit pref]
[ 0.205075] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff
64bit pref]
[ 0.205167] pci 0000:03:00.0: supports D1 D2
[ 0.205168] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205203] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.215059] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.215065] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.215074] pci 0000:00:1c.5: bridge window [mem
0xf0000000-0xf00fffff 64bit pref]
[ 0.215158] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.215278] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.215296] pci 0000:00:1c.6: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.215306] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.215307] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.215309] pci 0000:00:1c.6: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.215310] pci 0000:00:1c.6: bridge window [mem
0x000d0000-0x000d3fff] (subtractive decode)
[ 0.215312] pci 0000:00:1c.6: bridge window [mem
0x000d4000-0x000d7fff] (subtractive decode)
[ 0.215313] pci 0000:00:1c.6: bridge window [mem
0x000d8000-0x000dbfff] (subtractive decode)
[ 0.215314] pci 0000:00:1c.6: bridge window [mem
0x000dc000-0x000dffff] (subtractive decode)
[ 0.215316] pci 0000:00:1c.6: bridge window [mem
0x000e0000-0x000e3fff] (subtractive decode)
[ 0.215317] pci 0000:00:1c.6: bridge window [mem
0x000e4000-0x000e7fff] (subtractive decode)
[ 0.215319] pci 0000:00:1c.6: bridge window [mem
0xdf200000-0xfeafffff] (subtractive decode)
[ 0.215431] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.215452] pci 0000:04:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)
[ 0.215455] pci 0000:04:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)
[ 0.215456] pci 0000:04:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)
[ 0.215458] pci 0000:04:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)
[ 0.215459] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.215461] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.215462] pci 0000:04:00.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.215463] pci 0000:04:00.0: bridge window [mem
0x000d0000-0x000d3fff] (subtractive decode)
[ 0.215465] pci 0000:04:00.0: bridge window [mem
0x000d4000-0x000d7fff] (subtractive decode)
[ 0.215466] pci 0000:04:00.0: bridge window [mem
0x000d8000-0x000dbfff] (subtractive decode)
[ 0.215467] pci 0000:04:00.0: bridge window [mem
0x000dc000-0x000dffff] (subtractive decode)
[ 0.215469] pci 0000:04:00.0: bridge window [mem
0x000e0000-0x000e3fff] (subtractive decode)
[ 0.215470] pci 0000:04:00.0: bridge window [mem
0x000e4000-0x000e7fff] (subtractive decode)
[ 0.215472] pci 0000:04:00.0: bridge window [mem
0xdf200000-0xfeafffff] (subtractive decode)
[ 0.215914] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.215955] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.215995] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.216034] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.216073] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.216112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.216152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.216191] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.216393] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.216398] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.216444] Found 1 acpi root devices
[ 0.216516] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.216518] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.216520] vgaarb: loaded
[ 0.216521] vgaarb: bridge control possible 0000:00:02.0
[ 0.216635] SCSI subsystem initialized
[ 0.216671] libata version 3.00 loaded.
[ 0.216685] ACPI: bus type USB registered
[ 0.216696] usbcore: registered new interface driver usbfs
[ 0.216703] usbcore: registered new interface driver hub
[ 0.216728] usbcore: registered new device driver usb
[ 0.216804] PCI: Using ACPI for IRQ routing
[ 0.218291] PCI: pci_cache_line_size set to 64 bytes
[ 0.218332] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.218334] e820: reserve RAM buffer [mem 0xcc3c1000-0xcfffffff]
[ 0.218335] e820: reserve RAM buffer [mem 0xcd80f000-0xcfffffff]
[ 0.218337] e820: reserve RAM buffer [mem 0xcdc78000-0xcfffffff]
[ 0.218338] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.218339] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.218398] NetLabel: Initializing
[ 0.218400] NetLabel: domain hash size = 128
[ 0.218400] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.218411] NetLabel: unlabeled traffic allowed by default
[ 0.218453] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.218457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.220486] Switched to clocksource hpet
[ 0.223959] AppArmor: AppArmor Filesystem Enabled
[ 0.223976] pnp: PnP ACPI init
[ 0.223986] ACPI: bus type PNP registered
[ 0.224043] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.224045] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.224056] pnp 00:01: [dma 4]
[ 0.224066] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.224082] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.224152] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.224179] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.224181] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.224182] system 00:04: [io 0xffff] has been reserved
[ 0.224184] system 00:04: [io 0xffff] has been reserved
[ 0.224186] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.224187] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.224189] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.224190] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.224192] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224217] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.224250] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.224252] system 00:06: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.224311] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.224313] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224350] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.224352] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224373] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.224543] pnp 00:0a: [dma 0 disabled]
[ 0.224579] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.224772] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.224774] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.224775] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.224777] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.224779] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.224780] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.224782] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.224784] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.224787] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.224788] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.224790] system 00:0b: [mem 0xdf200000-0xdf200fff] has been reserved
[ 0.224792] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224913] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[ 0.224915] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[ 0.224917] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.224935] pnp: PnP ACPI: found 13 devices
[ 0.224936] ACPI: bus type PNP unregistered
[ 0.230714] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.230719] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.230736] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.230739] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.230745] pci 0000:00:1c.5: bridge window [mem
0xf0000000-0xf00fffff 64bit pref]
[ 0.230751] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.230770] pci 0000:00:1c.6: PCI bridge to [bus 04-05]
[ 0.230781] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.230782] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.230784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.230785] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.230786] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.230788] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.230789] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.230791] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.230792] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.230793] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[ 0.230795] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.230796] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff
64bit pref]
[ 0.230798] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.230799] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.230801] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.230802] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.230803] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.230805] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.230806] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.230807] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.230809] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.230810] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff]
[ 0.230812] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
[ 0.230813] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
[ 0.230814] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.230816] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.230817] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.230818] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.230820] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.230821] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.230822] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.230824] pci_bus 0000:05: resource 17 [mem 0xdf200000-0xfeafffff]
[ 0.230847] NET: Registered protocol family 2
[ 0.231050] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.231262] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.231372] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.231388] TCP: reno registered
[ 0.231404] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.231455] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.231528] NET: Registered protocol family 1
[ 0.231950] pci 0000:00:02.0: BIOS left Intel GPU interrupts
enabled; disabling
[ 0.231962] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.272637] PCI: CLS 64 bytes, default 64
[ 0.272677] Trying to unpack rootfs image as initramfs...
[ 0.639760] Freeing initrd memory: 27132K (ffff880034af2000 -
ffff880036571000)
[ 0.639770] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.639772] software IO TLB [mem 0xc83c1000-0xcc3c1000] (64MB)
mapped at [ffff8800c83c1000-ffff8800cc3c0fff]
[ 0.640032] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[ 0.640038] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[ 0.640042] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[ 0.640047] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[ 0.640052] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28
[ 0.640057] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28
[ 0.640062] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28
[ 0.640068] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28
[ 0.640111] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.640113] Scanning for low memory corruption every 60 seconds
[ 0.640318] Initialise system trusted keyring
[ 0.640353] audit: initializing netlink socket (disabled)
[ 0.640361] type=2000 audit(1441394185.628:1): initialized
[ 0.663041] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.663962] zbud: loaded
[ 0.664079] VFS: Disk quotas dquot_6.5.2
[ 0.664112] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.664409] fuse init (API version 7.22)
[ 0.664460] msgmni has been set to 31462
[ 0.664497] Key type big_key registered
[ 0.664816] Key type asymmetric registered
[ 0.664817] Asymmetric key parser 'x509' registered
[ 0.664837] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 252)
[ 0.664876] io scheduler noop registered
[ 0.664878] io scheduler deadline registered (default)
[ 0.664894] io scheduler cfq registered
[ 0.665052] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.665306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.665316] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.665341] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.665342] vesafb: scrolling: redraw
[ 0.665344] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.671899] vesafb: framebuffer at 0xe0000000, mapped to
0xffffc90005c00000, using 8128k, total 8128k
[ 0.675924] Console: switching to colour frame buffer device 240x67
[ 0.679867] fb0: VESA VGA frame buffer device
[ 0.679886] intel_idle: MWAIT substates: 0x1120
[ 0.679887] intel_idle: v0.4 model 0x2A
[ 0.679888] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.680013] ipmi message handler version 39.2
[ 0.680073] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.680077] ACPI: Power Button [PWRB]
[ 0.680101] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.680103] ACPI: Power Button [PWRF]
[ 0.680151] ACPI: Fan [FAN0] (off)
[ 0.680170] ACPI: Fan [FAN1] (off)
[ 0.680188] ACPI: Fan [FAN2] (off)
[ 0.680206] ACPI: Fan [FAN3] (off)
[ 0.680223] ACPI: Fan [FAN4] (off)
[ 0.685211] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.685213] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.685382] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.685383] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.685399] GHES: HEST is not enabled!
[ 0.685455] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.705899] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 0.706931] Linux agpgart interface v0.103
[ 0.707845] brd: module loaded
[ 0.708325] loop: module loaded
[ 0.708572] libphy: Fixed MDIO Bus: probed
[ 0.708632] tun: Universal TUN/TAP device driver, 1.6
[ 0.708633] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.708660] PPP generic driver version 2.4.2
[ 0.708687] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.708690] ehci-pci: EHCI PCI platform driver
[ 0.708778] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.708783] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 0.708795] ehci-pci 0000:00:1a.0: debug port 2
[ 0.712705] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.712724] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c18000
[ 0.720985] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.721014] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.721016] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.721017] usb usb1: Product: EHCI Host Controller
[ 0.721019] usb usb1: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
[ 0.721020] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.721094] hub 1-0:1.0: USB hub found
[ 0.721099] hub 1-0:1.0: 2 ports detected
[ 0.721249] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.721254] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 0.721265] ehci-pci 0000:00:1d.0: debug port 2
[ 0.725168] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.725184] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
[ 0.737005] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.737028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.737030] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.737032] usb usb2: Product: EHCI Host Controller
[ 0.737033] usb usb2: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
[ 0.737034] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.737100] hub 2-0:1.0: USB hub found
[ 0.737104] hub 2-0:1.0: 2 ports detected
[ 0.737178] ehci-platform: EHCI generic platform driver
[ 0.737183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.737184] ohci-pci: OHCI PCI platform driver
[ 0.737190] ohci-platform: OHCI generic platform driver
[ 0.737193] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.737280] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.737283] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 3
[ 0.737367] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.737386] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 0.737432] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.737434] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.737435] usb usb3: Product: xHCI Host Controller
[ 0.737437] usb usb3: Manufacturer: Linux 3.13.0-63-generic xhci_hcd
[ 0.737438] usb usb3: SerialNumber: 0000:00:14.0
[ 0.737528] hub 3-0:1.0: USB hub found
[ 0.737538] hub 3-0:1.0: 4 ports detected
[ 0.737769] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.737771] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 4
[ 0.737798] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.737799] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.737801] usb usb4: Product: xHCI Host Controller
[ 0.737802] usb usb4: Manufacturer: Linux 3.13.0-63-generic xhci_hcd
[ 0.737803] usb usb4: SerialNumber: 0000:00:14.0
[ 0.737892] hub 4-0:1.0: USB hub found
[ 0.737899] hub 4-0:1.0: 4 ports detected
[ 0.745047] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.747212] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.747218] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.747367] mousedev: PS/2 mouse device common for all mice
[ 0.747628] rtc_cmos 00:05: RTC can wake from S4
[ 0.747796] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.747826] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 0.747871] device-mapper: uevent: version 1.0.3
[ 0.747951] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30)
initialised: dm-devel@redhat.com
[ 0.747955] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.748029] TCP: cubic registered
[ 0.748081] NET: Registered protocol family 10
[ 0.748186] NET: Registered protocol family 17
[ 0.748196] Key type dns_resolver registered
[ 0.748500] Loading compiled-in X.509 certificates
[ 0.749294] Loaded X.509 cert 'Magrathea: Glacier signing key:
e253281fe265ee3ceafcaa3f292e212b95f0359a'
[ 0.749303] registered taskstats version 1
[ 0.751162] Key type trusted registered
[ 0.754598] Key type encrypted registered
[ 0.754602] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.754603] IMA: No TPM chip found, activating TPM-bypass!
[ 0.754845] regulator-dummy: disabling
[ 0.754972] Magic number: 15:54:293
[ 0.754986] tty tty26: hash matches
[ 0.755076] rtc_cmos 00:05: setting system clock to 2015-09-04
19:16:26 UTC (1441394186)
[ 0.756081] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.756083] EDD information not available.
[ 0.756122] PM: Hibernation image not present or could not be loaded.
[ 0.756775] Freeing unused kernel memory: 1336K (ffffffff81d20000 -
ffffffff81e6e000)
[ 0.756784] Write protecting the kernel read-only data: 12288k
[ 0.758453] Freeing unused kernel memory: 784K (ffff88000173c000 -
ffff880001800000)
[ 0.759791] Freeing unused kernel memory: 680K (ffff880001b56000 -
ffff880001c00000)
[ 0.768238] systemd-udevd[145]: starting version 204
[ 0.776249] wmi: Mapper loaded
[ 0.780961] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.780972] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have
ASPM control
[ 0.781239] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[ 0.781451] r8169 0000:03:00.0 eth0: RTL8168f/8111f at
0xffffc900018b6000, 08:60:6e:d8:8b:26, XID 08000800 IRQ 44
[ 0.781454] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[ 0.783054] [drm] Initialized drm 1.1.0 20060810
[ 0.787621] ahci 0000:00:1f.2: version 3.0
[ 0.787766] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.801102] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6
Gbps 0x2f impl SATA mode
[ 0.801105] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum
part ems apst
[ 0.833472] scsi0 : ahci
[ 0.833606] scsi1 : ahci
[ 0.833711] scsi2 : ahci
[ 0.833865] scsi3 : ahci
[ 0.833968] scsi4 : ahci
[ 0.834115] scsi5 : ahci
[ 0.834152] ata1: SATA max UDMA/133 abar m2048@0xf7c16000 port
0xf7c16100 irq 45
[ 0.834155] ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port
0xf7c16180 irq 45
[ 0.834156] ata3: SATA max UDMA/133 abar m2048@0xf7c16000 port
0xf7c16200 irq 45
[ 0.834158] ata4: SATA max UDMA/133 abar m2048@0xf7c16000 port
0xf7c16280 irq 45
[ 0.834159] ata5: DUMMY
[ 0.834161] ata6: SATA max UDMA/133 abar m2048@0xf7c16000 port
0xf7c16380 irq 45
[ 0.834954] [drm] Memory usable by graphics device = 2048M
[ 0.834957] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 0.834958] fb: conflicting fb hw usage inteldrmfb vs VESA VGA -
removing generic driver
[ 0.834969] Console: switching to colour dummy device 80x25
[ 0.881165] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 0.881171] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.881172] [drm] Driver supports precise vblank timestamp query.
[ 0.881235] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.894509] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 0.894511] [drm] This can cause pipe underruns and display issues.
[ 0.894512] [drm] Please upgrade your BIOS to fix this.
[ 0.963573] fbcon: inteldrmfb (fb0) is primary device
[ 1.033300] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.153439] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.153458] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.153474] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.153489] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.153514] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.153800] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.153804] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880409829a78), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.153851] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.153865] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880409829af0), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.153934] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.153937] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880409829a00), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.153950] ata3.00: ATA-9: WDC WD20EFRX-68EUZN0, 80.00A80, max UDMA/133
[ 1.153951] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.154017] ata4.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 1.154018] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.154049] ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 1.154050] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.154324] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.154326] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880409829a78), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.154421] ata3.00: configured for UDMA/133
[ 1.154464] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.154466] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880409829af0), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.154578] ata4.00: configured for UDMA/133
[ 1.155343] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.155346] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880409829988), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.155363] ata1.00: supports DRM functions and may not be fully accessible
[ 1.155398] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.155399] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
[ 1.155400] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.155457] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.155460] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880409829a00), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.155568] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.155571] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880409829988), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.155577] ata2.00: configured for UDMA/133
[ 1.155591] ata1.00: supports DRM functions and may not be fully accessible
[ 1.155632] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.155634] ata1.00: configured for UDMA/133
[ 1.155755] scsi 0:0:0:0: Direct-Access ATA Samsung SSD
840 EXT0 PQ: 0 ANSI: 5
[ 1.155881] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks:
(120 GB/111 GiB)
[ 1.155885] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.156076] scsi 1:0:0:0: Direct-Access ATA WDC
WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
[ 1.156168] sd 0:0:0:0: [sda] Write Protect is off
[ 1.156170] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.156229] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.156234] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 1.156236] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.156236] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.156328] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.156330] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.156337] scsi 2:0:0:0: Direct-Access ATA WDC
WD20EFRX-68E 80.0 PQ: 0 ANSI: 5
[ 1.156366] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.156438] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 1.156439] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.156477] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.156522] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.156524] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.156559] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.156573] scsi 3:0:0:0: Direct-Access ATA WDC
WD20EFRX-68E 82.0 PQ: 0 ANSI: 5
[ 1.156632] sda: sda1
[ 1.156698] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 1.156700] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 1.156701] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.156742] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.156744] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.156776] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.156883] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.161454] Console: switching to colour frame buffer device 240x67
[ 1.161570] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.161572] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880409829be0), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.161574] ata6.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.02, max UDMA/133
[ 1.164877] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.164878] i915 0000:00:02.0: registered panic notifier
[ 1.165707] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.165709] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.165860] hub 1-1:1.0: USB hub found
[ 1.165956] hub 1-1:1.0: 6 ports detected
[ 1.169533] ACPI Error: [DSSP] Namespace lookup failure,
AE_NOT_FOUND (20131115/psargs-359)
[ 1.169537] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880409829be0), AE_NOT_FOUND
(20131115/psparse-536)
[ 1.169543] ata6.00: configured for UDMA/133
[ 1.169873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.170697] acpi device:48: registered as cooling_device13
[ 1.170757] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.170806] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.172595] sdd: unknown partition table
[ 1.172685] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.182810] sdb: unknown partition table
[ 1.183164] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.183353] scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE
BH10LS30 1.02 PQ: 0 ANSI: 5
[ 1.192418] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.192423] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.192584] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.192637] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 1.281564] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.414120] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.414124] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.414402] hub 2-1:1.0: USB hub found
[ 1.414457] hub 2-1:1.0: 8 ports detected
[ 1.637922] tsc: Refined TSC clocksource calibration: 2808.247 MHz
[ 1.685961] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[ 1.778476] usb 2-1.6: New USB device found, idVendor=0424, idProduct=2514
[ 1.778481] usb 2-1.6: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.778762] hub 2-1.6:1.0: USB hub found
[ 1.778853] hub 2-1.6:1.0: 4 ports detected
[ 1.784297] sdc: unknown partition table
[ 1.784644] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.850125] usb 2-1.7: new high-speed USB device number 4 using ehci-pci
[ 1.942887] usb 2-1.7: New USB device found, idVendor=1a40, idProduct=0101
[ 1.942892] usb 2-1.7: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1.942895] usb 2-1.7: Product: USB 2.0 Hub [MTT]
[ 1.943117] hub 2-1.7:1.0: USB hub found
[ 1.943216] hub 2-1.7:1.0: 4 ports detected
[ 2.014276] usb 2-1.8: new high-speed USB device number 5 using ehci-pci
[ 2.109154] usb 2-1.8: New USB device found, idVendor=03f0, idProduct=3217
[ 2.109158] usb 2-1.8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.109159] usb 2-1.8: Product: HP LaserJet 3050
[ 2.109161] usb 2-1.8: Manufacturer: Hewlett-Packard
[ 2.109162] usb 2-1.8: SerialNumber: 00CNCJ258213
[ 2.182441] usb 2-1.6.2: new high-speed USB device number 6 using ehci-pci
[ 2.210457] raid6: sse2x1 8458 MB/s
[ 2.278518] raid6: sse2x2 10948 MB/s
[ 2.346585] raid6: sse2x4 12604 MB/s
[ 2.346587] raid6: using algorithm sse2x4 (12604 MB/s)
[ 2.346588] raid6: using ssse3x2 recovery algorithm
[ 2.347603] xor: automatically using best checksumming function:
[ 2.386623] avx : 25103.000 MB/sec
[ 2.396320] bio: create slab <bio-1> at 1
[ 2.396510] Btrfs loaded
[ 2.407711] random: nonblocking pool is initialized
[ 2.450547] btrfs: device fsid be4138ff-0dd9-48ed-9408-9dd679d4cc0b
devid 1 transid 329588 /dev/sda1
[ 2.480216] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 1 transid 34755 /dev/sdb
[ 2.480289] usb 2-1.6.2: New USB device found, idVendor=03f0, idProduct=e307
[ 2.480291] usb 2-1.6.2: New USB device strings: Mfr=3, Product=1,
SerialNumber=0
[ 2.480293] usb 2-1.6.2: Product: HP Webcam HD 3300
[ 2.480295] usb 2-1.6.2: Manufacturer: Hewlett Packard
[ 2.488765] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.491927] usbcore: registered new interface driver usbhid
[ 2.491928] usbhid: USB HID core driver
[ 2.493325] hid-generic 0003:03F0:E307.0001: hiddev0,hidraw0: USB
HID v1.11 Device [Hewlett Packard HP Webcam HD 3300] on
usb-0000:00:1d.0-1.6.2/input4
[ 2.519360] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 3 transid 34755 /dev/sdc
[ 2.558816] usb 2-1.7.1: new low-speed USB device number 7 using ehci-pci
[ 2.639160] Switched to clocksource tsc
[ 2.656706] usb 2-1.7.1: New USB device found, idVendor=046d, idProduct=c046
[ 2.656711] usb 2-1.7.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.656714] usb 2-1.7.1: Product: USB Optical Mouse
[ 2.656717] usb 2-1.7.1: Manufacturer: Logitech
[ 2.660756] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.1/2-1.7.1:1.0/input/input6
[ 2.661031] hid-generic 0003:046D:C046.0002: input,hidraw1: USB HID
v1.10 Mouse [Logitech USB Optical Mouse] on
usb-0000:00:1d.0-1.7.1/input0
[ 2.730985] usb 2-1.7.2: new full-speed USB device number 8 using ehci-pci
[ 2.827404] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.829501] usb 2-1.7.2: New USB device found, idVendor=08e6, idProduct=3437
[ 2.829505] usb 2-1.7.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.829508] usb 2-1.7.2: Product: USB SmartCard Reader
[ 2.829511] usb 2-1.7.2: Manufacturer: Gemplus
[ 2.899156] usb 2-1.7.3: new full-speed USB device number 9 using ehci-pci
[ 2.994892] usb 2-1.7.3: New USB device found, idVendor=046d, idProduct=c52b
[ 2.994897] usb 2-1.7.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.994900] usb 2-1.7.3: Product: USB Receiver
[ 2.994902] usb 2-1.7.3: Manufacturer: Logitech
[ 3.002708] logitech-djreceiver 0003:046D:C52B.0005:
hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:1d.0-1.7.3/input2
[ 3.006437] input: Logitech Unifying Device. Wireless PID:4011 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.2/0003:046D:C52B.0005/input/input7
[ 3.006497] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3:
USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4011]
on usb-0000:00:1d.0-1.7.3:1
[ 3.071321] usb 2-1.7.4: new low-speed USB device number 10 using ehci-pci
[ 3.181473] usb 2-1.7.4: New USB device found, idVendor=04f2, idProduct=1060
[ 3.181478] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.181480] usb 2-1.7.4: Product: USB Keyboard
[ 3.181483] usb 2-1.7.4: Manufacturer: CHICONY
[ 3.190664] input: CHICONY USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/input/input8
[ 3.190784] hid-generic 0003:04F2:1060.0007: input,hidraw4: USB HID
v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.7.4/input0
[ 3.204244] input: CHICONY USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/input/input9
[ 3.204527] hid-generic 0003:04F2:1060.0008: input,hiddev0,hidraw5:
USB HID v1.11 Device [CHICONY USB Keyboard] on
usb-0000:00:1d.0-1.7.4/input1
[ 7.529942] btrfs: device fsid be4138ff-0dd9-48ed-9408-9dd679d4cc0b
devid 1 transid 329588
/dev/disk/by-uuid/be4138ff-0dd9-48ed-9408-9dd679d4cc0b
[ 7.530202] btrfs: disk space caching is enabled
[ 7.544732] Btrfs detected SSD devices, enabling SSD mode
[ 10.074534] btrfs: disk space caching is enabled
[ 11.090076] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.112338] systemd-udevd[460]: starting version 204
[ 11.134547] lp: driver loaded but no devices found
[ 11.140748] ppdev: user-space parallel port driver
[ 11.160810] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.168309] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 11.172703] ACPI Warning: 0x0000000000000428-0x000000000000042f
SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 11.172711] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 11.172715] ACPI Warning: 0x0000000000000530-0x000000000000053f
SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 11.172720] ACPI Warning: 0x0000000000000530-0x000000000000053f
SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2
(20131115/utaddress-251)
[ 11.172723] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 11.172725] ACPI Warning: 0x0000000000000500-0x000000000000052f
SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 11.172728] ACPI Warning: 0x0000000000000500-0x000000000000052f
SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2
(20131115/utaddress-251)
[ 11.172732] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 11.172733] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.186137] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 3 transid 34755 /dev/sdc
[ 11.189275] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 1 transid 34755 /dev/sdb
[ 11.193477] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 3 transid 34755 /dev/sdc
[ 11.198249] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
devid 1 transid 34755 /dev/sdb
[ 11.205094] WARNING! power/level is deprecated; use power/control instead
[ 11.223521] systemd-udevd[486]: renamed network interface eth0 to eth1
[ 11.230527] type=1400 audit(1441394196.958:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/sbin/dhclient"
pid=710 comm="apparmor_parser"
[ 11.230533] type=1400 audit(1441394196.958:3): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710
comm="apparmor_parser"
[ 11.230536] type=1400 audit(1441394196.958:4): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=710
comm="apparmor_parser"
[ 11.230881] type=1400 audit(1441394196.958:5): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710
comm="apparmor_parser"
[ 11.230885] type=1400 audit(1441394196.958:6): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=710
comm="apparmor_parser"
[ 11.231065] type=1400 audit(1441394196.958:7): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=710
comm="apparmor_parser"
[ 11.236836] btrfs: device fsid be4138ff-0dd9-48ed-9408-9dd679d4cc0b
devid 1 transid 329588 /dev/sda1
[ 11.243628] btrfs: device fsid be4138ff-0dd9-48ed-9408-9dd679d4cc0b
devid 1 transid 329588 /dev/sda1
[ 11.244198] Linux video capture interface: v2.00
[ 11.255290] uvcvideo: Found UVC 1.00 device HP Webcam HD 3300 (03f0:e307)
[ 11.257894] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 11.267304] input: HP Webcam HD 3300 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input10
[ 11.267485] usbcore: registered new interface driver uvcvideo
[ 11.267487] USB Video Class driver (1.1.1)
[ 11.292706] SKU: Nid=0x1d sku_cfg=0x4016c629
[ 11.292709] SKU: port_connectivity=0x1
[ 11.292710] SKU: enable_pcbeep=0x1
[ 11.292711] SKU: check_sum=0x00000006
[ 11.292712] SKU: customization=0x000000c6
[ 11.292712] SKU: external_amp=0x5
[ 11.292713] SKU: platform_type=0x0
[ 11.292714] SKU: swap=0x0
[ 11.292715] SKU: override=0x1
[ 11.293346] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 11.293348] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.293349] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 11.293350] mono: mono_out=0x0
[ 11.293351] dig-out=0x11/0x1e
[ 11.293351] inputs:
[ 11.293353] Front Mic=0x19
[ 11.293354] Rear Mic=0x18
[ 11.293355] Line=0x1a
[ 11.293356] realtek: No valid SSID, checking pincfg 0x4016c629 for NID 0x1d
[ 11.293357] realtek: Enabling init ASM_ID=0xc629 CODEC_ID=10ec0887
[ 11.300526] asus_wmi: ASUS WMI generic driver loaded
[ 11.303937] asus_wmi: Initialization: 0x0
[ 11.303963] asus_wmi: BIOS WMI version: 0.9
[ 11.304009] asus_wmi: SFUN value: 0x0
[ 11.304375] input: Eee PC WMI hotkeys as
/devices/platform/eeepc-wmi/input/input11
[ 11.306312] asus_wmi: Backlight controlled by ACPI video driver
[ 11.328366] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 11.328495] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 11.328611] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 11.328832] usbcore: registered new interface driver snd-usb-audio
[ 11.329014] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 11.329138] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.329254] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.361634] init: Failed to obtain startpar-bridge instance:
Unknown parameter: INSTANCE
[ 12.340581] usblp 2-1.8:1.0: usblp3: USB Bidirectional printer dev
5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3217
[ 12.340603] usbcore: registered new interface driver usblp
[ 25.613739] FS-Cache: Loaded
[ 25.622135] RPC: Registered named UNIX socket transport module.
[ 25.622138] RPC: Registered udp transport module.
[ 25.622139] RPC: Registered tcp transport module.
[ 25.622140] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.640074] FS-Cache: Netfs 'nfs' registered for caching
[ 25.659220] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 25.671325] init: failsafe main process (945) killed by TERM signal
[ 25.723593] Bluetooth: Core ver 2.17
[ 25.723608] NET: Registered protocol family 31
[ 25.723610] Bluetooth: HCI device and connection manager initialized
[ 25.723617] Bluetooth: HCI socket layer initialized
[ 25.723620] Bluetooth: L2CAP socket layer initialized
[ 25.723625] Bluetooth: SCO socket layer initialized
[ 25.725710] init: samba-ad-dc main process (1008) terminated with status 1
[ 25.728247] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.728250] Bluetooth: BNEP filters: protocol multicast
[ 25.728257] Bluetooth: BNEP socket layer initialized
[ 25.730151] Bluetooth: RFCOMM TTY layer initialized
[ 25.730158] Bluetooth: RFCOMM socket layer initialized
[ 25.730163] Bluetooth: RFCOMM ver 1.11
[ 25.767409] type=1400 audit(1441394211.482:8): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=1115 comm="apparmor_parser"
[ 25.767415] type=1400 audit(1441394211.482:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd"
pid=1115 comm="apparmor_parser"
[ 25.767758] type=1400 audit(1441394211.482:10): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/sbin/cupsd" pid=1115 comm="apparmor_parser"
[ 25.781927] init: cups main process (1139) killed by HUP signal
[ 25.781935] init: cups main process ended, respawning
[ 25.807506] type=1400 audit(1441394211.522:11): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/sbin/dhclient"
pid=1196 comm="apparmor_parser"
[ 25.807514] type=1400 audit(1441394211.522:12): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1196
comm="apparmor_parser"
[ 25.807517] type=1400 audit(1441394211.522:13): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=1196
comm="apparmor_parser"
[ 25.807840] type=1400 audit(1441394211.522:14): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/sbin/cups-browsed" pid=1200 comm="apparmor_parser"
[ 25.807856] type=1400 audit(1441394211.522:15): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld"
pid=1202 comm="apparmor_parser"
[ 25.807863] type=1400 audit(1441394211.522:16): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1196
comm="apparmor_parser"
[ 25.807866] type=1400 audit(1441394211.522:17): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=1196
comm="apparmor_parser"
[ 25.936705] r8169 0000:03:00.0 eth1: link down
[ 25.936746] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 25.936770] r8169 0000:03:00.0 eth1: link down
[ 25.936893] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.143965] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 26.143978] NFSD: starting 90-second grace period (net ffffffff81cdab80)
[ 26.333122] vboxdrv: module verification failed: signature and/or
required key missing - tainting kernel
[ 26.335909] vboxdrv: Found 8 processor cores.
[ 26.336152] vboxdrv: fAsync=0 offMin=0x1f6 offMax=0x3a76
[ 26.336213] vboxdrv: TSC mode is 'synchronous', kernel timer mode
is 'normal'.
[ 26.336214] vboxdrv: Successfully loaded version 4.3.10_Ubuntu
(interface 0x001a0007).
[ 26.356040] vboxpci: IOMMU not found (not registered)
[ 26.425381] init: plymouth-upstart-bridge main process ended, respawning
[ 26.429145] init: plymouth-upstart-bridge main process (1733)
terminated with status 1
[ 26.429154] init: plymouth-upstart-bridge main process ended, respawning
[ 28.093691] r8169 0000:03:00.0 eth1: link up
[ 28.093698] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 29.210730] init: plexmediaserver main process (2323) terminated
with status 2
[ 29.210745] init: plexmediaserver main process ended, respawning
[ 29.222150] init: plexmediaserver main process (2349) terminated
with status 2
[ 29.222167] init: plexmediaserver main process ended, respawning
[ 29.227101] init: plexmediaserver main process (2375) terminated
with status 2
[ 29.227110] init: plexmediaserver main process ended, respawning
[ 29.231627] init: plexmediaserver main process (2381) terminated
with status 2
[ 29.231635] init: plexmediaserver main process ended, respawning
[ 29.241439] init: plexmediaserver main process (2387) terminated
with status 2
[ 29.241453] init: plexmediaserver main process ended, respawning
[ 29.247316] init: plexmediaserver main process (2401) terminated
with status 2
[ 29.247324] init: plexmediaserver main process ended, respawning
[ 29.251046] init: plexmediaserver main process (2407) terminated
with status 2
[ 29.251053] init: plexmediaserver main process ended, respawning
[ 29.254974] init: plexmediaserver main process (2410) terminated
with status 2
[ 29.254991] init: plexmediaserver main process ended, respawning
[ 29.258536] init: plexmediaserver main process (2413) terminated
with status 2
[ 29.258544] init: plexmediaserver main process ended, respawning
[ 29.262168] init: plexmediaserver main process (2416) terminated
with status 2
[ 29.262176] init: plexmediaserver main process ended, respawning
[ 29.265842] init: plexmediaserver main process (2419) terminated
with status 2
[ 29.265850] init: plexmediaserver respawning too fast, stopped
[ 46.534732] init: plymouth-stop pre-start process (5500) terminated
with status 1
[ 55.865621] audit_printk_skb: 138 callbacks suppressed
[ 55.865624] type=1400 audit(1441394241.545:64): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=5569 comm="apparmor_parser"
[ 55.865628] type=1400 audit(1441394241.545:65): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/sbin/cupsd" pid=5569 comm="apparmor_parser"
[ 55.865896] type=1400 audit(1441394241.545:66): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/sbin/cupsd" pid=5569 comm="apparmor_parser"
Thanks,
--
Ivan Petrović
--
IP PLUS STUDIO
Vojvode Stepe 403v, 11221 Beograd, Srbija
T: +381 11 630 2853
F: +381 11 630 2853
www.ipplus.rs
^ permalink raw reply [flat|nested] 13+ messages in thread
* unable to mount multi disk volume with recovery mode
@ 2015-09-04 21:07 Ivan
2015-09-04 21:17 ` Hugo Mills
0 siblings, 1 reply; 13+ messages in thread
From: Ivan @ 2015-09-04 21:07 UTC (permalink / raw)
To: linux-btrfs
Just to add this:
ivan@ipplus-dev:~$ sudo btrfs filesystem df /mnt/ambis/
Data, single: total=108.76GiB, used=107.11GiB
System, single: total=32.00MiB, used=20.00KiB
Metadata, single: total=3.00GiB, used=2.34GiB
ivan@ipplus-dev:~$
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-04 20:45 unable to mount multi disk volume with recovery mode Ivan Petrovic
@ 2015-09-04 21:13 ` Ivan
2015-09-14 6:25 ` Qu Wenruo
1 sibling, 0 replies; 13+ messages in thread
From: Ivan @ 2015-09-04 21:13 UTC (permalink / raw)
To: linux-btrfs
Just to add this:
ivan <at> ipplus-dev:~$ sudo btrfs filesystem df /mnt/ambis/
Data, single: total=108.76GiB, used=107.11GiB
System, single: total=32.00MiB, used=20.00KiB
Metadata, single: total=3.00GiB, used=2.34GiB
ivan <at> ipplus-dev:~$
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-04 21:07 Ivan
@ 2015-09-04 21:17 ` Hugo Mills
2015-09-05 10:13 ` Ivan Petrovic
0 siblings, 1 reply; 13+ messages in thread
From: Hugo Mills @ 2015-09-04 21:17 UTC (permalink / raw)
To: Ivan; +Cc: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 1154 bytes --]
On Fri, Sep 04, 2015 at 09:07:34PM +0000, Ivan wrote:
>
> Just to add this:
>
> ivan@ipplus-dev:~$ sudo btrfs filesystem df /mnt/ambis/
> Data, single: total=108.76GiB, used=107.11GiB
> System, single: total=32.00MiB, used=20.00KiB
> Metadata, single: total=3.00GiB, used=2.34GiB
> ivan@ipplus-dev:~$
(If you can't mount the FS, how did you get this output? -- In what
I say below, I'm asuming that this was the last output from btrfs fi
df on the broken filesystem before it broke).
This is the problem: You're using single for everything. That means
that with the loss of one device, approximately one part in three of
your filesystem is missing, including the metadata. If the missing
drive is truly broken, this filesystem is dead, without any good means
of recovery. You'll need to use your backups.
You would have to have RAID-1 system and metadata for the FS to be
even partly recoverable with a missing device. (Or RAID-10, -5 or -6).
Hugo.
--
Hugo Mills | "There's more than one way to do it" is not a
hugo@... carfax.org.uk | commandment. It is a dire warning.
http://carfax.org.uk/ |
PGP: E2AB1DE4 |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-04 21:17 ` Hugo Mills
@ 2015-09-05 10:13 ` Ivan Petrovic
2015-09-05 10:42 ` Hugo Mills
0 siblings, 1 reply; 13+ messages in thread
From: Ivan Petrovic @ 2015-09-05 10:13 UTC (permalink / raw)
To: Hugo Mills, Ivan, linux-btrfs
I don't know... but after btrfs-zero-log now I can't:
ivan@ipplus-dev:~$ sudo btrfs filesystem df /dev/sdb
[sudo] password for ivan:
ERROR: couldn't get space info - Inappropriate ioctl for device
ERROR: get_df failed Inappropriate ioctl for device
ivan@ipplus-dev:~$
So you're saying that I can't make first and third partition to work
with it's data? Maybe I'll try with btrfs-restore, do you think it can
rescue this 2 drives?
Thanks
2015-09-04 23:17 GMT+02:00 Hugo Mills <hugo@carfax.org.uk>:
> On Fri, Sep 04, 2015 at 09:07:34PM +0000, Ivan wrote:
>>
>> Just to add this:
>>
>> ivan@ipplus-dev:~$ sudo btrfs filesystem df /mnt/ambis/
>> Data, single: total=108.76GiB, used=107.11GiB
>> System, single: total=32.00MiB, used=20.00KiB
>> Metadata, single: total=3.00GiB, used=2.34GiB
>> ivan@ipplus-dev:~$
>
> (If you can't mount the FS, how did you get this output? -- In what
> I say below, I'm asuming that this was the last output from btrfs fi
> df on the broken filesystem before it broke).
>
> This is the problem: You're using single for everything. That means
> that with the loss of one device, approximately one part in three of
> your filesystem is missing, including the metadata. If the missing
> drive is truly broken, this filesystem is dead, without any good means
> of recovery. You'll need to use your backups.
>
> You would have to have RAID-1 system and metadata for the FS to be
> even partly recoverable with a missing device. (Or RAID-10, -5 or -6).
>
> Hugo.
>
> --
> Hugo Mills | "There's more than one way to do it" is not a
> hugo@... carfax.org.uk | commandment. It is a dire warning.
> http://carfax.org.uk/ |
> PGP: E2AB1DE4 |
--
Ivan Petrović
IP PLUS STUDIO
Vojvode Stepe 403v, 11221 Beograd, Srbija
T: +381 11 630 2853
F: +381 11 630 2853
www.ipplus.rs
--
IP PLUS STUDIO
Vojvode Stepe 403v, 11221 Beograd, Srbija
T: +381 11 630 2853
F: +381 11 630 2853
www.ipplus.rs
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-05 10:13 ` Ivan Petrovic
@ 2015-09-05 10:42 ` Hugo Mills
2015-09-07 17:58 ` Chris Murphy
0 siblings, 1 reply; 13+ messages in thread
From: Hugo Mills @ 2015-09-05 10:42 UTC (permalink / raw)
To: Ivan Petrovic; +Cc: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 2201 bytes --]
On Sat, Sep 05, 2015 at 12:13:30PM +0200, Ivan Petrovic wrote:
> I don't know... but after btrfs-zero-log now I can't:
>
> ivan@ipplus-dev:~$ sudo btrfs filesystem df /dev/sdb
> [sudo] password for ivan:
> ERROR: couldn't get space info - Inappropriate ioctl for device
> ERROR: get_df failed Inappropriate ioctl for device
> ivan@ipplus-dev:~$
You can only use this command while the FS is mounted, and you
can't give it a device, only a mountpoint.
Also, note that btrfs-zero-log won't help you at all here. It's not
a magic "fix everything for me" tool.
> So you're saying that I can't make first and third partition to work
> with it's data? Maybe I'll try with btrfs-restore, do you think it can
> rescue this 2 drives?
Unlikely. Like I said, if the FS was using single storage for
everything, a random 33% of the filesystem has gone away. There's
probably not enough of it left to make anything coherent.
Hugo.
> Thanks
>
> 2015-09-04 23:17 GMT+02:00 Hugo Mills <hugo@carfax.org.uk>:
> > On Fri, Sep 04, 2015 at 09:07:34PM +0000, Ivan wrote:
> >>
> >> Just to add this:
> >>
> >> ivan@ipplus-dev:~$ sudo btrfs filesystem df /mnt/ambis/
> >> Data, single: total=108.76GiB, used=107.11GiB
> >> System, single: total=32.00MiB, used=20.00KiB
> >> Metadata, single: total=3.00GiB, used=2.34GiB
> >> ivan@ipplus-dev:~$
> >
> > (If you can't mount the FS, how did you get this output? -- In what
> > I say below, I'm asuming that this was the last output from btrfs fi
> > df on the broken filesystem before it broke).
> >
> > This is the problem: You're using single for everything. That means
> > that with the loss of one device, approximately one part in three of
> > your filesystem is missing, including the metadata. If the missing
> > drive is truly broken, this filesystem is dead, without any good means
> > of recovery. You'll need to use your backups.
> >
> > You would have to have RAID-1 system and metadata for the FS to be
> > even partly recoverable with a missing device. (Or RAID-10, -5 or -6).
> >
> > Hugo.
> >
--
Hugo Mills | Preventing talpidian orogenesis.
hugo@... carfax.org.uk |
http://carfax.org.uk/ |
PGP: E2AB1DE4 |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-05 10:42 ` Hugo Mills
@ 2015-09-07 17:58 ` Chris Murphy
2015-09-07 18:01 ` Chris Murphy
2015-09-07 18:05 ` Hugo Mills
0 siblings, 2 replies; 13+ messages in thread
From: Chris Murphy @ 2015-09-07 17:58 UTC (permalink / raw)
To: Hugo Mills, Btrfs BTRFS
On Sat, Sep 5, 2015 at 4:42 AM, Hugo Mills <hugo@carfax.org.uk> wrote:
> On Sat, Sep 05, 2015 at 12:13:30PM +0200, Ivan Petrovic wrote:
>> So you're saying that I can't make first and third partition to work
>> with it's data? Maybe I'll try with btrfs-restore, do you think it can
>> rescue this 2 drives?
>
> Unlikely. Like I said, if the FS was using single storage for
> everything, a random 33% of the filesystem has gone away. There's
> probably not enough of it left to make anything coherent.
With single profile for everything, is metadata and data guaranteed to
be co-located on the same device? If not, then there's no way for this
to be recovered. If they are, then I think recovery would depend on
the system chunk always being device-n mirrored, which we don't have.
--
Chris Murphy
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-07 17:58 ` Chris Murphy
@ 2015-09-07 18:01 ` Chris Murphy
2015-09-07 18:05 ` Hugo Mills
1 sibling, 0 replies; 13+ messages in thread
From: Chris Murphy @ 2015-09-07 18:01 UTC (permalink / raw)
Cc: Hugo Mills, Btrfs BTRFS
On Mon, Sep 7, 2015 at 11:58 AM, Chris Murphy <lists@colorremedies.com> wrote:
> On Sat, Sep 5, 2015 at 4:42 AM, Hugo Mills <hugo@carfax.org.uk> wrote:
>> On Sat, Sep 05, 2015 at 12:13:30PM +0200, Ivan Petrovic wrote:
>
>>> So you're saying that I can't make first and third partition to work
>>> with it's data? Maybe I'll try with btrfs-restore, do you think it can
>>> rescue this 2 drives?
>>
>> Unlikely. Like I said, if the FS was using single storage for
>> everything, a random 33% of the filesystem has gone away. There's
>> probably not enough of it left to make anything coherent.
>
> With single profile for everything, is metadata and data guaranteed to
> be co-located on the same device? If not, then there's no way for this
> to be recovered. If they are, then I think recovery would depend on
> the system chunk always being device-n mirrored, which we don't have.
Sorry. In single device failure, raid1 system chunk is possible and
might help. But to be able to recover data from any surviving drive
(n-1 failures) would mean each device has a copy of the system chunk,
in addition to guaranteed co-location of data and metadata chunks.
--
Chris Murphy
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-07 17:58 ` Chris Murphy
2015-09-07 18:01 ` Chris Murphy
@ 2015-09-07 18:05 ` Hugo Mills
1 sibling, 0 replies; 13+ messages in thread
From: Hugo Mills @ 2015-09-07 18:05 UTC (permalink / raw)
To: Chris Murphy; +Cc: Btrfs BTRFS
[-- Attachment #1: Type: text/plain, Size: 1083 bytes --]
On Mon, Sep 07, 2015 at 11:58:45AM -0600, Chris Murphy wrote:
> On Sat, Sep 5, 2015 at 4:42 AM, Hugo Mills <hugo@carfax.org.uk> wrote:
> > On Sat, Sep 05, 2015 at 12:13:30PM +0200, Ivan Petrovic wrote:
>
> >> So you're saying that I can't make first and third partition to work
> >> with it's data? Maybe I'll try with btrfs-restore, do you think it can
> >> rescue this 2 drives?
> >
> > Unlikely. Like I said, if the FS was using single storage for
> > everything, a random 33% of the filesystem has gone away. There's
> > probably not enough of it left to make anything coherent.
>
> With single profile for everything, is metadata and data guaranteed to
> be co-located on the same device? If not, then there's no way for this
> to be recovered. If they are, then I think recovery would depend on
> the system chunk always being device-n mirrored, which we don't have.
No, there's no guarantee of co-location of data and metadata.
Hugo.
--
Hugo Mills | UNIX: Italian pen maker
hugo@... carfax.org.uk |
http://carfax.org.uk/ |
PGP: E2AB1DE4 |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-04 20:45 unable to mount multi disk volume with recovery mode Ivan Petrovic
2015-09-04 21:13 ` Ivan
@ 2015-09-14 6:25 ` Qu Wenruo
2015-09-14 9:44 ` Anand Jain
1 sibling, 1 reply; 13+ messages in thread
From: Qu Wenruo @ 2015-09-14 6:25 UTC (permalink / raw)
To: Ivan Petrovic, linux-btrfs@vger.kernel.org
Hi Ivan,
Ivan Petrovic wrote on 2015/09/04 22:45 +0200:
> Hello,
>
> I had 3 HDDs in single mode and one died.
Unfortunately, single mode means no duplication.
And degrade mount only works for RAID level with
duplication(DUP,RAID1/5/6/10).
So you lost all your data.
Thanks,
Qu
> I have put a replacement but
> I can't figure out how to mount recovery or degraded filesystem. First
> and third partitions was sdb and sdc and I'm trying to replace second
> with new hdd /dev/sdd
>
> ivan@ipplus-dev:~$ uname -a
> Linux ipplus-dev 3.13.0-63-generic #103-Ubuntu SMP Fri Aug 14 21:42:59
> UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
>
> ivan@ipplus-dev:~$ btrfs --version
> Btrfs v3.12
>
> ivan@ipplus-dev:~$ sudo btrfs device scan
> Scanning for Btrfs filesystems
>
> ivan@ipplus-dev:~$ sudo btrfs fi show
> Label: none uuid: be4138ff-0dd9-48ed-9408-9dd679d4cc0b
> Total devices 1 FS bytes used 109.43GiB
> devid 1 size 111.79GiB used 111.79GiB path /dev/sda1
>
> Label: none uuid: 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> Total devices 3 FS bytes used 4.50TiB
> devid 1 size 1.82TiB used 1.82TiB path /dev/sdb
> devid 3 size 1.82TiB used 900.00GiB path /dev/sdc
> *** Some devices missing
>
> Btrfs v3.12
> ivan@ipplus-dev:~$
>
> Now I try to mount first partition in recovery but third partition
> showing open_ctree failed in dmesg.
>
> ivan@ipplus-dev:~$ sudo mount -o recovery,ro -t btrfs /dev/sdb /mnt/ambis/
> mount: wrong fs type, bad option, bad superblock on /dev/sdb,
> missing codepage or helper program, or other error
> Некада се корисне информације могу наћи у syslog - покушајте са
> dmesg | tail или нечим сличним
>
> ivan@ipplus-dev:~$ dmesg | tail
> [ 55.865624] type=1400 audit(1441394241.545:64): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/cups/backend/cups-pdf" pid=5569 comm="apparmor_parser"
> [ 55.865628] type=1400 audit(1441394241.545:65): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/sbin/cupsd" pid=5569 comm="apparmor_parser"
> [ 55.865896] type=1400 audit(1441394241.545:66): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/sbin/cupsd" pid=5569 comm="apparmor_parser"
> [ 92.429625] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 1 transid 34755 /dev/sdb
> [ 92.429906] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 3 transid 34755 /dev/sdc
> [ 182.527543] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 1 transid 34755 /dev/sdb
> [ 182.528283] btrfs: enabling auto recovery
> [ 182.528287] btrfs: disk space caching is enabled
> [ 182.529404] btrfs: failed to read the system array on sdc
> [ 182.545306] btrfs: open_ctree failed
>
> Degraded mount showing the same
>
> ivan@ipplus-dev:~$ sudo mount -o degraded -t btrfs /dev/sdb /mnt/ambis/
> mount: wrong fs type, bad option, bad superblock on /dev/sdb,
> missing codepage or helper program, or other error
> Некада се корисне информације могу наћи у syslog - покушајте са
> dmesg | tail или нечим сличним
>
> ivan@ipplus-dev:~$ dmesg | tail
> [ 182.529404] btrfs: failed to read the system array on sdc
> [ 182.545306] btrfs: open_ctree failed
> [ 437.838712] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 1 transid 34755 /dev/sdb
> [ 437.839023] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 3 transid 34755 /dev/sdc
> [ 655.529281] systemd-hostnamed[6532]: Warning: nss-myhostname is not
> installed. Changing the local hostname might make it unresolveable.
> Please install nss-myhostname!
> [ 850.636389] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 1 transid 34755 /dev/sdb
> [ 850.637131] btrfs: allowing degraded mounts
> [ 850.637135] btrfs: disk space caching is enabled
> [ 858.980371] Btrfs: too many missing devices, writeable mount is not allowed
> [ 859.007281] btrfs: open_ctree failed
>
>
> What I need to replace missing drive with new
>
> dmesg.log
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.13.0-63-generic (buildd@lgw01-18) (gcc
> version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #103-Ubuntu SMP Fri Aug 14
> 21:42:59 UTC 2015 (Ubuntu 3.13.0-63.103-generic 3.13.11-ckt25)
> [ 0.000000] Command line:
> BOOT_IMAGE=/boot/vmlinuz-3.13.0-63-generic
> root=UUID=be4138ff-0dd9-48ed-9408-9dd679d4cc0b ro quiet splash
> vt.handoff=7
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000cc3c0fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000cc3c1000-0x00000000ccac1fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ccac2000-0x00000000ccad2fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000ccad3000-0x00000000ccbf9fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000ccbfa000-0x00000000cd80dfff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000cd80e000-0x00000000cd80efff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000cd80f000-0x00000000cd851fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000cd852000-0x00000000cdc77fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000cdc78000-0x00000000cdff3fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: System manufacturer System Product Name/P8Z77-M,
> BIOS 1806 01/03/2013
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-E7FFF uncachable
> [ 0.000000] E8000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask C00000000 write-back
> [ 0.000000] 1 base 400000000 mask FE0000000 write-back
> [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
> [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
> [ 0.000000] 4 base 0CF000000 mask FFF000000 uncachable
> [ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] 8 disabled
> [ 0.000000] 9 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] original variable MTRRs
> [ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
> [ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
> [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
> [ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
> [ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC
> [ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
> [ 0.000000] total RAM covered: 16110M
> [ 0.000000] Found optimal setting for mtrr clean up
> [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
> [ 0.000000] New variable MTRRs
> [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
> [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
> [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
> [ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
> [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
> [ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
> [ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
> [ 0.000000] reg 7, base: 16894MB, range: 2MB, type UC
> [ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f]
> mapped at [ffff8800000fd810]
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
> [ 0.000000] reserving inaccessible SNB gfx pages
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
> [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
> [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
> [ 0.000000] [mem 0x41fc00000-0x41fdfffff] page 2M
> [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fbfffff]
> [ 0.000000] [mem 0x41c000000-0x41fbfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
> [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
> [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x40200000-0xcc3c0fff]
> [ 0.000000] [mem 0x40200000-0xcc1fffff] page 2M
> [ 0.000000] [mem 0xcc200000-0xcc3c0fff] page 4k
> [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
> [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xcd80e000-0xcd80efff]
> [ 0.000000] [mem 0xcd80e000-0xcd80efff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xcd852000-0xcdc77fff]
> [ 0.000000] [mem 0xcd852000-0xcd9fffff] page 4k
> [ 0.000000] [mem 0xcda00000-0xcdbfffff] page 2M
> [ 0.000000] [mem 0xcdc00000-0xcdc77fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xcdff4000-0xcdffffff]
> [ 0.000000] [mem 0xcdff4000-0xcdffffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
> [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
> [ 0.000000] RAMDISK: [mem 0x34af2000-0x36570fff]
> [ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
> [ 0.000000] ACPI: XSDT 00000000ccac5080 000074 (v01 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI: FACP 00000000ccad0328 00010C (v05 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI: DSDT 00000000ccac5188 00B19E (v02 ALASKA A M I
> 00000022 INTL 20051117)
> [ 0.000000] ACPI: FACS 00000000ccbf8080 000040
> [ 0.000000] ACPI: APIC 00000000ccad0438 000092 (v03 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI: FPDT 00000000ccad04d0 000044 (v01 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI: MCFG 00000000ccad0518 00003C (v01 ALASKA A M I
> 01072009 MSFT 00000097)
> [ 0.000000] ACPI: SSDT 00000000ccad0558 0007CA (v01 Intel_ AoacTabl
> 00001000 INTL 20091112)
> [ 0.000000] ACPI: HPET 00000000ccad0d28 000038 (v01 ALASKA A M I
> 01072009 AMI. 00000005)
> [ 0.000000] ACPI: SSDT 00000000ccad0d60 00036D (v01 SataRe SataTabl
> 00001000 INTL 20091112)
> [ 0.000000] ACPI: DMAR 00000000ccad24e8 0000B8 (v01 INTEL SNB
> 00000001 INTL 00000001)
> [ 0.000000] ACPI: SSDT 00000000ccad1128 000926 (v01 PmRef Cpu0Ist
> 00003000 INTL 20051117)
> [ 0.000000] ACPI: SSDT 00000000ccad1a50 000A92 (v01 PmRef CpuPm
> 00003000 INTL 20051117)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fdfffff]
> [ 0.000000] NODE_DATA [mem 0x41fdea000-0x41fdeefff]
> [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD ->
> [ffff88040f800000-ffff88041f3fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x41fdfffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
> [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
> [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
> [ 0.000000] node 0: [mem 0x40200000-0xcc3c0fff]
> [ 0.000000] node 0: [mem 0xcd80e000-0xcd80efff]
> [ 0.000000] node 0: [mem 0xcd852000-0xcdc77fff]
> [ 0.000000] node 0: [mem 0xcdff4000-0xcdffffff]
> [ 0.000000] node 0: [mem 0x100000000-0x41fdfffff]
> [ 0.000000] On node 0 totalpages: 4112784
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 156 pages reserved
> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 13008 pages used for memmap
> [ 0.000000] DMA32 zone: 832500 pages, LIFO batch:31
> [ 0.000000] Normal zone: 51192 pages used for memmap
> [ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xcc3c1000-0xccac1fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xccac2000-0xccad2fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xccad3000-0xccbf9fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xccbfa000-0xcd80dfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xcd80f000-0xcd851fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xcdc78000-0xcdff3fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
> [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256
> nr_cpu_ids:8 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041fa00000 s81536
> r8192 d20864 u262144
> [ 0.000000] pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 4048364
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-3.13.0-63-generic
> root=UUID=be4138ff-0dd9-48ed-9408-9dd679d4cc0b ro quiet splash
> vt.handoff=7
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [ 0.000000] Memory: 16081784K/16451136K available (7395K kernel
> code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 369352K
> reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
> [ 0.000000] Offload RCU callbacks from all CPUs
> [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
> [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 66060288 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.004000] tsc: Detected 2808.402 MHz processor
> [ 0.000002] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 5616.80 BogoMIPS (lpj=11233608)
> [ 0.000005] pid_max: default: 32768 minimum: 301
> [ 0.000027] Security Framework initialized
> [ 0.000043] AppArmor: AppArmor initialized
> [ 0.000044] Yama: becoming mindful.
> [ 0.000997] Dentry cache hash table entries: 2097152 (order: 12,
> 16777216 bytes)
> [ 0.003802] Inode-cache hash table entries: 1048576 (order: 11,
> 8388608 bytes)
> [ 0.005017] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 0.005034] Mountpoint-cache hash table entries: 32768 (order: 6,
> 262144 bytes)
> [ 0.005230] Initializing cgroup subsys memory
> [ 0.005235] Initializing cgroup subsys devices
> [ 0.005236] Initializing cgroup subsys freezer
> [ 0.005237] Initializing cgroup subsys blkio
> [ 0.005239] Initializing cgroup subsys perf_event
> [ 0.005240] Initializing cgroup subsys hugetlb
> [ 0.005258] CPU: Physical Processor ID: 0
> [ 0.005259] CPU: Processor Core ID: 0
> [ 0.005263] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.005263] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> [ 0.005265] mce: CPU supports 9 MCE banks
> [ 0.005277] CPU0: Thermal monitoring enabled (TM1)
> [ 0.005282] process: using mwait in idle threads
> [ 0.005285] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
> [ 0.005285] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> [ 0.005285] tlb_flushall_shift: 5
> [ 0.005378] Freeing SMP alternatives memory: 32K (ffffffff81e6e000
> - ffffffff81e76000)
> [ 0.006648] ACPI: Core revision 20131115
> [ 0.011392] ACPI: All ACPI Tables successfully acquired
> [ 0.013607] ftrace: allocating 28590 entries in 112 pages
> [ 0.025852] dmar: Host address width 36
> [ 0.025854] dmar: DRHD base: 0x000000fed90000 flags: 0x0
> [ 0.025860] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
> c0000020e60262 ecap f0101a
> [ 0.025862] dmar: DRHD base: 0x000000fed91000 flags: 0x1
> [ 0.025866] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap
> c9008020660262 ecap f0105a
> [ 0.025867] dmar: RMRR base: 0x000000cca44000 end: 0x000000cca55fff
> [ 0.025868] dmar: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
> [ 0.025938] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
> [ 0.025939] HPET id 0 under DRHD base 0xfed91000
> [ 0.026096] Enabled IRQ remapping in x2apic mode
> [ 0.026097] Enabling x2apic
> [ 0.026098] Enabled x2apic
> [ 0.026102] Switched APIC routing to cluster x2apic.
> [ 0.026510] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.066235] smpboot: CPU0: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz
> (fam: 06, model: 2a, stepping: 07)
> [ 0.066241] TSC deadline timer enabled
> [ 0.066249] Performance Events: PEBS fmt1+, 16-deep LBR,
> SandyBridge events, full-width counters, Intel PMU driver.
> [ 0.066256] ... version: 3
> [ 0.066256] ... bit width: 48
> [ 0.066257] ... generic registers: 4
> [ 0.066258] ... value mask: 0000ffffffffffff
> [ 0.066259] ... max period: 0000ffffffffffff
> [ 0.066260] ... fixed-purpose events: 3
> [ 0.066261] ... event mask: 000000070000000f
> [ 0.067661] x86: Booting SMP configuration:
> [ 0.080783] NMI watchdog: enabled on all CPUs, permanently consumes
> one hw-PMU counter.
> [ 0.067662] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
> [ 0.159568] x86: Booted up 1 node, 8 CPUs
> [ 0.159572] smpboot: Total of 8 processors activated (44934.43 BogoMIPS)
> [ 0.167180] devtmpfs: initialized
> [ 0.169776] EVM: security.selinux
> [ 0.169777] EVM: security.SMACK64
> [ 0.169778] EVM: security.ima
> [ 0.169779] EVM: security.capability
> [ 0.169815] PM: Registering ACPI NVS region [mem
> 0xccad3000-0xccbf9fff] (1208320 bytes)
> [ 0.169831] PM: Registering ACPI NVS region [mem
> 0xcd80f000-0xcd851fff] (274432 bytes)
> [ 0.170500] pinctrl core: initialized pinctrl subsystem
> [ 0.170547] regulator-dummy: no parameters
> [ 0.170576] RTC time: 19:16:25, date: 09/04/15
> [ 0.170603] NET: Registered protocol family 16
> [ 0.170688] cpuidle: using governor ladder
> [ 0.170689] cpuidle: using governor menu
> [ 0.170718] ACPI FADT declares the system doesn't support PCIe
> ASPM, so disable it
> [ 0.170720] ACPI: bus type PCI registered
> [ 0.170721] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.170766] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
> 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.170768] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> [ 0.176760] PCI: Using configuration type 1 for base access
> [ 0.177601] bio: create slab <bio-0> at 0
> [ 0.177722] ACPI: Added _OSI(Module Device)
> [ 0.177723] ACPI: Added _OSI(Processor Device)
> [ 0.177724] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.177725] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.180282] ACPI: Executed 1 blocks of module-level executable AML code
> [ 0.183313] ACPI: SSDT 00000000cca6f018 00083B (v01 PmRef Cpu0Cst
> 00003001 INTL 20051117)
> [ 0.183607] ACPI: Dynamic OEM Table Load:
> [ 0.183609] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst
> 00003001 INTL 20051117)
> [ 0.187225] ACPI: SSDT 00000000cca70a98 000303 (v01 PmRef ApIst
> 00003000 INTL 20051117)
> [ 0.187539] ACPI: Dynamic OEM Table Load:
> [ 0.187541] ACPI: SSDT (null) 000303 (v01 PmRef ApIst
> 00003000 INTL 20051117)
> [ 0.191098] ACPI: SSDT 00000000cca71c18 000119 (v01 PmRef ApCst
> 00003000 INTL 20051117)
> [ 0.191384] ACPI: Dynamic OEM Table Load:
> [ 0.191385] ACPI: SSDT (null) 000119 (v01 PmRef ApCst
> 00003000 INTL 20051117)
> [ 0.195990] ACPI: Interpreter enabled
> [ 0.195995] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S1_] (20131115/hwxface-580)
> [ 0.195999] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S2_] (20131115/hwxface-580)
> [ 0.196010] ACPI: (supports S0 S3 S4 S5)
> [ 0.196011] ACPI: Using IOAPIC for interrupt routing
> [ 0.196034] PCI: Using host bridge windows from ACPI; if necessary,
> use "pci=nocrs" and report a bug
> [ 0.196166] ACPI: No dock devices found.
> [ 0.201183] ACPI: Power Resource [FN00] (off)
> [ 0.201245] ACPI: Power Resource [FN01] (off)
> [ 0.201304] ACPI: Power Resource [FN02] (off)
> [ 0.201362] ACPI: Power Resource [FN03] (off)
> [ 0.201422] ACPI: Power Resource [FN04] (off)
> [ 0.201930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> [ 0.201935] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
> ClockPM Segments MSI]
> [ 0.202106] acpi PNP0A08:00: _OSC: platform does not support
> [PCIeHotplug PME]
> [ 0.202211] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
> [ 0.202212] acpi PNP0A08:00: FADT indicates ASPM is unsupported,
> using BIOS configuration
> [ 0.202703] PCI host bridge to bus 0000:00
> [ 0.202705] pci_bus 0000:00: root bus resource [bus 00-3e]
> [ 0.202707] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.202709] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.202710] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 0.202712] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
> [ 0.202713] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
> [ 0.202714] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
> [ 0.202716] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
> [ 0.202717] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
> [ 0.202718] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
> [ 0.202720] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
> [ 0.202726] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
> [ 0.202802] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
> [ 0.202828] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.202868] pci 0000:00:01.0: System wakeup disabled by ACPI
> [ 0.202896] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
> [ 0.202905] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
> [ 0.202910] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
> 64bit pref]
> [ 0.202914] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
> [ 0.203002] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
> [ 0.203027] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
> [ 0.203096] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.203139] pci 0000:00:14.0: System wakeup disabled by ACPI
> [ 0.203166] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
> [ 0.203188] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
> [ 0.203259] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 0.203336] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
> [ 0.203357] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
> [ 0.203444] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 0.203499] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.203527] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
> [ 0.203541] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
> [ 0.203606] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.203652] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.203680] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
> [ 0.203808] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.203864] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.203892] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
> [ 0.203968] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [ 0.204015] pci 0000:00:1c.5: System wakeup disabled by ACPI
> [ 0.204039] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
> [ 0.204115] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
> [ 0.204162] pci 0000:00:1c.6: System wakeup disabled by ACPI
> [ 0.204190] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
> [ 0.204210] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
> [ 0.204298] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.204352] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.204379] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
> [ 0.204542] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
> [ 0.204559] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
> [ 0.204566] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
> [ 0.204573] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
> [ 0.204580] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
> [ 0.204587] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
> [ 0.204594] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
> [ 0.204637] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.204698] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
> [ 0.204712] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
> [ 0.204732] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
> [ 0.204829] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 0.204911] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [ 0.205001] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
> [ 0.205021] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
> [ 0.205054] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff
> 64bit pref]
> [ 0.205075] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff
> 64bit pref]
> [ 0.205167] pci 0000:03:00.0: supports D1 D2
> [ 0.205168] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.205203] pci 0000:03:00.0: System wakeup disabled by ACPI
> [ 0.215059] pci 0000:00:1c.5: PCI bridge to [bus 03]
> [ 0.215065] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
> [ 0.215074] pci 0000:00:1c.5: bridge window [mem
> 0xf0000000-0xf00fffff 64bit pref]
> [ 0.215158] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
> [ 0.215278] pci 0000:04:00.0: System wakeup disabled by ACPI
> [ 0.215296] pci 0000:00:1c.6: PCI bridge to [bus 04-05] (subtractive decode)
> [ 0.215306] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7]
> (subtractive decode)
> [ 0.215307] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff]
> (subtractive decode)
> [ 0.215309] pci 0000:00:1c.6: bridge window [mem
> 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.215310] pci 0000:00:1c.6: bridge window [mem
> 0x000d0000-0x000d3fff] (subtractive decode)
> [ 0.215312] pci 0000:00:1c.6: bridge window [mem
> 0x000d4000-0x000d7fff] (subtractive decode)
> [ 0.215313] pci 0000:00:1c.6: bridge window [mem
> 0x000d8000-0x000dbfff] (subtractive decode)
> [ 0.215314] pci 0000:00:1c.6: bridge window [mem
> 0x000dc000-0x000dffff] (subtractive decode)
> [ 0.215316] pci 0000:00:1c.6: bridge window [mem
> 0x000e0000-0x000e3fff] (subtractive decode)
> [ 0.215317] pci 0000:00:1c.6: bridge window [mem
> 0x000e4000-0x000e7fff] (subtractive decode)
> [ 0.215319] pci 0000:00:1c.6: bridge window [mem
> 0xdf200000-0xfeafffff] (subtractive decode)
> [ 0.215431] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
> [ 0.215452] pci 0000:04:00.0: bridge window [??? 0x00000000 flags
> 0x0] (subtractive decode)
> [ 0.215455] pci 0000:04:00.0: bridge window [??? 0x00000000 flags
> 0x0] (subtractive decode)
> [ 0.215456] pci 0000:04:00.0: bridge window [??? 0x00000000 flags
> 0x0] (subtractive decode)
> [ 0.215458] pci 0000:04:00.0: bridge window [??? 0x00000000 flags
> 0x0] (subtractive decode)
> [ 0.215459] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7]
> (subtractive decode)
> [ 0.215461] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff]
> (subtractive decode)
> [ 0.215462] pci 0000:04:00.0: bridge window [mem
> 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.215463] pci 0000:04:00.0: bridge window [mem
> 0x000d0000-0x000d3fff] (subtractive decode)
> [ 0.215465] pci 0000:04:00.0: bridge window [mem
> 0x000d4000-0x000d7fff] (subtractive decode)
> [ 0.215466] pci 0000:04:00.0: bridge window [mem
> 0x000d8000-0x000dbfff] (subtractive decode)
> [ 0.215467] pci 0000:04:00.0: bridge window [mem
> 0x000dc000-0x000dffff] (subtractive decode)
> [ 0.215469] pci 0000:04:00.0: bridge window [mem
> 0x000e0000-0x000e3fff] (subtractive decode)
> [ 0.215470] pci 0000:04:00.0: bridge window [mem
> 0x000e4000-0x000e7fff] (subtractive decode)
> [ 0.215472] pci 0000:04:00.0: bridge window [mem
> 0xdf200000-0xfeafffff] (subtractive decode)
> [ 0.215914] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.215955] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
> [ 0.215995] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.216034] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
> [ 0.216073] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.216112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.216152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
> [ 0.216191] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
> [ 0.216393] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 0.216398] ACPI: \_SB_.PCI0: notify handler is installed
> [ 0.216444] Found 1 acpi root devices
> [ 0.216516] vgaarb: setting as boot device: PCI:0000:00:02.0
> [ 0.216518] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.216520] vgaarb: loaded
> [ 0.216521] vgaarb: bridge control possible 0000:00:02.0
> [ 0.216635] SCSI subsystem initialized
> [ 0.216671] libata version 3.00 loaded.
> [ 0.216685] ACPI: bus type USB registered
> [ 0.216696] usbcore: registered new interface driver usbfs
> [ 0.216703] usbcore: registered new interface driver hub
> [ 0.216728] usbcore: registered new device driver usb
> [ 0.216804] PCI: Using ACPI for IRQ routing
> [ 0.218291] PCI: pci_cache_line_size set to 64 bytes
> [ 0.218332] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
> [ 0.218334] e820: reserve RAM buffer [mem 0xcc3c1000-0xcfffffff]
> [ 0.218335] e820: reserve RAM buffer [mem 0xcd80f000-0xcfffffff]
> [ 0.218337] e820: reserve RAM buffer [mem 0xcdc78000-0xcfffffff]
> [ 0.218338] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
> [ 0.218339] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
> [ 0.218398] NetLabel: Initializing
> [ 0.218400] NetLabel: domain hash size = 128
> [ 0.218400] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.218411] NetLabel: unlabeled traffic allowed by default
> [ 0.218453] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 0.218457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 0.220486] Switched to clocksource hpet
> [ 0.223959] AppArmor: AppArmor Filesystem Enabled
> [ 0.223976] pnp: PnP ACPI init
> [ 0.223986] ACPI: bus type PNP registered
> [ 0.224043] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
> [ 0.224045] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.224056] pnp 00:01: [dma 4]
> [ 0.224066] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.224082] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
> [ 0.224152] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 0.224179] system 00:04: [io 0x0680-0x069f] has been reserved
> [ 0.224181] system 00:04: [io 0x1000-0x100f] has been reserved
> [ 0.224182] system 00:04: [io 0xffff] has been reserved
> [ 0.224184] system 00:04: [io 0xffff] has been reserved
> [ 0.224186] system 00:04: [io 0x0400-0x0453] could not be reserved
> [ 0.224187] system 00:04: [io 0x0458-0x047f] has been reserved
> [ 0.224189] system 00:04: [io 0x0500-0x057f] has been reserved
> [ 0.224190] system 00:04: [io 0x164e-0x164f] has been reserved
> [ 0.224192] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.224217] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.224250] system 00:06: [io 0x0454-0x0457] has been reserved
> [ 0.224252] system 00:06: Plug and Play ACPI device, IDs INT3f0d
> PNP0c02 (active)
> [ 0.224311] system 00:07: [io 0x0290-0x029f] has been reserved
> [ 0.224313] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.224350] system 00:08: [io 0x04d0-0x04d1] has been reserved
> [ 0.224352] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.224373] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.224543] pnp 00:0a: [dma 0 disabled]
> [ 0.224579] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.224772] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.224774] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 0.224775] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 0.224777] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 0.224779] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
> [ 0.224780] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 0.224782] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
> [ 0.224784] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
> [ 0.224787] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
> [ 0.224788] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
> [ 0.224790] system 00:0b: [mem 0xdf200000-0xdf200fff] has been reserved
> [ 0.224792] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.224913] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
> [ 0.224915] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
> [ 0.224917] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.224935] pnp: PnP ACPI: found 13 devices
> [ 0.224936] ACPI: bus type PNP unregistered
> [ 0.230714] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 0.230719] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [ 0.230736] pci 0000:00:1c.5: PCI bridge to [bus 03]
> [ 0.230739] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
> [ 0.230745] pci 0000:00:1c.5: bridge window [mem
> 0xf0000000-0xf00fffff 64bit pref]
> [ 0.230751] pci 0000:04:00.0: PCI bridge to [bus 05]
> [ 0.230770] pci 0000:00:1c.6: PCI bridge to [bus 04-05]
> [ 0.230781] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.230782] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.230784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.230785] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
> [ 0.230786] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
> [ 0.230788] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
> [ 0.230789] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
> [ 0.230791] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
> [ 0.230792] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
> [ 0.230793] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
> [ 0.230795] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
> [ 0.230796] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff
> 64bit pref]
> [ 0.230798] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
> [ 0.230799] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
> [ 0.230801] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.230802] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
> [ 0.230803] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
> [ 0.230805] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
> [ 0.230806] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
> [ 0.230807] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
> [ 0.230809] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
> [ 0.230810] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff]
> [ 0.230812] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
> [ 0.230813] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
> [ 0.230814] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
> [ 0.230816] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
> [ 0.230817] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
> [ 0.230818] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
> [ 0.230820] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
> [ 0.230821] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
> [ 0.230822] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
> [ 0.230824] pci_bus 0000:05: resource 17 [mem 0xdf200000-0xfeafffff]
> [ 0.230847] NET: Registered protocol family 2
> [ 0.231050] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.231262] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.231372] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.231388] TCP: reno registered
> [ 0.231404] UDP hash table entries: 8192 (order: 6, 262144 bytes)
> [ 0.231455] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
> [ 0.231528] NET: Registered protocol family 1
> [ 0.231950] pci 0000:00:02.0: BIOS left Intel GPU interrupts
> enabled; disabling
> [ 0.231962] pci 0000:00:02.0: Video device with shadowed ROM
> [ 0.272637] PCI: CLS 64 bytes, default 64
> [ 0.272677] Trying to unpack rootfs image as initramfs...
> [ 0.639760] Freeing initrd memory: 27132K (ffff880034af2000 -
> ffff880036571000)
> [ 0.639770] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.639772] software IO TLB [mem 0xc83c1000-0xcc3c1000] (64MB)
> mapped at [ffff8800c83c1000-ffff8800cc3c0fff]
> [ 0.640032] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
> [ 0.640038] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
> [ 0.640042] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
> [ 0.640047] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
> [ 0.640052] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28
> [ 0.640057] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28
> [ 0.640062] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28
> [ 0.640068] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28
> [ 0.640111] microcode: Microcode Update Driver: v2.00
> <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 0.640113] Scanning for low memory corruption every 60 seconds
> [ 0.640318] Initialise system trusted keyring
> [ 0.640353] audit: initializing netlink socket (disabled)
> [ 0.640361] type=2000 audit(1441394185.628:1): initialized
> [ 0.663041] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.663962] zbud: loaded
> [ 0.664079] VFS: Disk quotas dquot_6.5.2
> [ 0.664112] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.664409] fuse init (API version 7.22)
> [ 0.664460] msgmni has been set to 31462
> [ 0.664497] Key type big_key registered
> [ 0.664816] Key type asymmetric registered
> [ 0.664817] Asymmetric key parser 'x509' registered
> [ 0.664837] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 252)
> [ 0.664876] io scheduler noop registered
> [ 0.664878] io scheduler deadline registered (default)
> [ 0.664894] io scheduler cfq registered
> [ 0.665052] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
> [ 0.665306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.665316] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.665341] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
> [ 0.665342] vesafb: scrolling: redraw
> [ 0.665344] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 0.671899] vesafb: framebuffer at 0xe0000000, mapped to
> 0xffffc90005c00000, using 8128k, total 8128k
> [ 0.675924] Console: switching to colour frame buffer device 240x67
> [ 0.679867] fb0: VESA VGA frame buffer device
> [ 0.679886] intel_idle: MWAIT substates: 0x1120
> [ 0.679887] intel_idle: v0.4 model 0x2A
> [ 0.679888] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 0.680013] ipmi message handler version 39.2
> [ 0.680073] input: Power Button as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> [ 0.680077] ACPI: Power Button [PWRB]
> [ 0.680101] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.680103] ACPI: Power Button [PWRF]
> [ 0.680151] ACPI: Fan [FAN0] (off)
> [ 0.680170] ACPI: Fan [FAN1] (off)
> [ 0.680188] ACPI: Fan [FAN2] (off)
> [ 0.680206] ACPI: Fan [FAN3] (off)
> [ 0.680223] ACPI: Fan [FAN4] (off)
> [ 0.685211] thermal LNXTHERM:00: registered as thermal_zone0
> [ 0.685213] ACPI: Thermal Zone [TZ00] (28 C)
> [ 0.685382] thermal LNXTHERM:01: registered as thermal_zone1
> [ 0.685383] ACPI: Thermal Zone [TZ01] (30 C)
> [ 0.685399] GHES: HEST is not enabled!
> [ 0.685455] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 0.705899] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
> is a 16550A
> [ 0.706931] Linux agpgart interface v0.103
> [ 0.707845] brd: module loaded
> [ 0.708325] loop: module loaded
> [ 0.708572] libphy: Fixed MDIO Bus: probed
> [ 0.708632] tun: Universal TUN/TAP device driver, 1.6
> [ 0.708633] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [ 0.708660] PPP generic driver version 2.4.2
> [ 0.708687] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.708690] ehci-pci: EHCI PCI platform driver
> [ 0.708778] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 0.708783] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
> bus number 1
> [ 0.708795] ehci-pci 0000:00:1a.0: debug port 2
> [ 0.712705] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 0.712724] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c18000
> [ 0.720985] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 0.721014] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.721016] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.721017] usb usb1: Product: EHCI Host Controller
> [ 0.721019] usb usb1: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
> [ 0.721020] usb usb1: SerialNumber: 0000:00:1a.0
> [ 0.721094] hub 1-0:1.0: USB hub found
> [ 0.721099] hub 1-0:1.0: 2 ports detected
> [ 0.721249] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 0.721254] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
> bus number 2
> [ 0.721265] ehci-pci 0000:00:1d.0: debug port 2
> [ 0.725168] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 0.725184] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
> [ 0.737005] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 0.737028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.737030] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.737032] usb usb2: Product: EHCI Host Controller
> [ 0.737033] usb usb2: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
> [ 0.737034] usb usb2: SerialNumber: 0000:00:1d.0
> [ 0.737100] hub 2-0:1.0: USB hub found
> [ 0.737104] hub 2-0:1.0: 2 ports detected
> [ 0.737178] ehci-platform: EHCI generic platform driver
> [ 0.737183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.737184] ohci-pci: OHCI PCI platform driver
> [ 0.737190] ohci-platform: OHCI generic platform driver
> [ 0.737193] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.737280] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.737283] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 3
> [ 0.737367] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
> [ 0.737386] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
> [ 0.737432] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.737434] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.737435] usb usb3: Product: xHCI Host Controller
> [ 0.737437] usb usb3: Manufacturer: Linux 3.13.0-63-generic xhci_hcd
> [ 0.737438] usb usb3: SerialNumber: 0000:00:14.0
> [ 0.737528] hub 3-0:1.0: USB hub found
> [ 0.737538] hub 3-0:1.0: 4 ports detected
> [ 0.737769] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.737771] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 4
> [ 0.737798] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
> [ 0.737799] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.737801] usb usb4: Product: xHCI Host Controller
> [ 0.737802] usb usb4: Manufacturer: Linux 3.13.0-63-generic xhci_hcd
> [ 0.737803] usb usb4: SerialNumber: 0000:00:14.0
> [ 0.737892] hub 4-0:1.0: USB hub found
> [ 0.737899] hub 4-0:1.0: 4 ports detected
> [ 0.745047] i8042: PNP: No PS/2 controller found. Probing ports directly.
> [ 0.747212] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.747218] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.747367] mousedev: PS/2 mouse device common for all mice
> [ 0.747628] rtc_cmos 00:05: RTC can wake from S4
> [ 0.747796] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> [ 0.747826] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes
> nvram, hpet irqs
> [ 0.747871] device-mapper: uevent: version 1.0.3
> [ 0.747951] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30)
> initialised: dm-devel@redhat.com
> [ 0.747955] ledtrig-cpu: registered to indicate activity on CPUs
> [ 0.748029] TCP: cubic registered
> [ 0.748081] NET: Registered protocol family 10
> [ 0.748186] NET: Registered protocol family 17
> [ 0.748196] Key type dns_resolver registered
> [ 0.748500] Loading compiled-in X.509 certificates
> [ 0.749294] Loaded X.509 cert 'Magrathea: Glacier signing key:
> e253281fe265ee3ceafcaa3f292e212b95f0359a'
> [ 0.749303] registered taskstats version 1
> [ 0.751162] Key type trusted registered
> [ 0.754598] Key type encrypted registered
> [ 0.754602] AppArmor: AppArmor sha1 policy hashing enabled
> [ 0.754603] IMA: No TPM chip found, activating TPM-bypass!
> [ 0.754845] regulator-dummy: disabling
> [ 0.754972] Magic number: 15:54:293
> [ 0.754986] tty tty26: hash matches
> [ 0.755076] rtc_cmos 00:05: setting system clock to 2015-09-04
> 19:16:26 UTC (1441394186)
> [ 0.756081] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 0.756083] EDD information not available.
> [ 0.756122] PM: Hibernation image not present or could not be loaded.
> [ 0.756775] Freeing unused kernel memory: 1336K (ffffffff81d20000 -
> ffffffff81e6e000)
> [ 0.756784] Write protecting the kernel read-only data: 12288k
> [ 0.758453] Freeing unused kernel memory: 784K (ffff88000173c000 -
> ffff880001800000)
> [ 0.759791] Freeing unused kernel memory: 680K (ffff880001b56000 -
> ffff880001c00000)
> [ 0.768238] systemd-udevd[145]: starting version 204
> [ 0.776249] wmi: Mapper loaded
> [ 0.780961] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 0.780972] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have
> ASPM control
> [ 0.781239] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
> [ 0.781451] r8169 0000:03:00.0 eth0: RTL8168f/8111f at
> 0xffffc900018b6000, 08:60:6e:d8:8b:26, XID 08000800 IRQ 44
> [ 0.781454] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200
> bytes, tx checksumming: ko]
> [ 0.783054] [drm] Initialized drm 1.1.0 20060810
> [ 0.787621] ahci 0000:00:1f.2: version 3.0
> [ 0.787766] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
> [ 0.801102] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6
> Gbps 0x2f impl SATA mode
> [ 0.801105] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum
> part ems apst
> [ 0.833472] scsi0 : ahci
> [ 0.833606] scsi1 : ahci
> [ 0.833711] scsi2 : ahci
> [ 0.833865] scsi3 : ahci
> [ 0.833968] scsi4 : ahci
> [ 0.834115] scsi5 : ahci
> [ 0.834152] ata1: SATA max UDMA/133 abar m2048@0xf7c16000 port
> 0xf7c16100 irq 45
> [ 0.834155] ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port
> 0xf7c16180 irq 45
> [ 0.834156] ata3: SATA max UDMA/133 abar m2048@0xf7c16000 port
> 0xf7c16200 irq 45
> [ 0.834158] ata4: SATA max UDMA/133 abar m2048@0xf7c16000 port
> 0xf7c16280 irq 45
> [ 0.834159] ata5: DUMMY
> [ 0.834161] ata6: SATA max UDMA/133 abar m2048@0xf7c16000 port
> 0xf7c16380 irq 45
> [ 0.834954] [drm] Memory usable by graphics device = 2048M
> [ 0.834957] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
> [ 0.834958] fb: conflicting fb hw usage inteldrmfb vs VESA VGA -
> removing generic driver
> [ 0.834969] Console: switching to colour dummy device 80x25
> [ 0.881165] i915 0000:00:02.0: irq 46 for MSI/MSI-X
> [ 0.881171] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 0.881172] [drm] Driver supports precise vblank timestamp query.
> [ 0.881235] vgaarb: device changed decodes:
> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 0.894509] [drm] Wrong MCH_SSKPD value: 0x16040307
> [ 0.894511] [drm] This can cause pipe underruns and display issues.
> [ 0.894512] [drm] Please upgrade your BIOS to fix this.
> [ 0.963573] fbcon: inteldrmfb (fb0) is primary device
> [ 1.033300] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 1.153439] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.153458] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.153474] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 1.153489] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 1.153514] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.153800] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.153804] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880409829a78), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.153851] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.153865] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880409829af0), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.153934] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.153937] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880409829a00), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.153950] ata3.00: ATA-9: WDC WD20EFRX-68EUZN0, 80.00A80, max UDMA/133
> [ 1.153951] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [ 1.154017] ata4.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
> [ 1.154018] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [ 1.154049] ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
> [ 1.154050] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [ 1.154324] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.154326] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880409829a78), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.154421] ata3.00: configured for UDMA/133
> [ 1.154464] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.154466] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880409829af0), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.154578] ata4.00: configured for UDMA/133
> [ 1.155343] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.155346] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880409829988), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.155363] ata1.00: supports DRM functions and may not be fully accessible
> [ 1.155398] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
> [ 1.155399] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
> [ 1.155400] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
> [ 1.155457] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.155460] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880409829a00), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.155568] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.155571] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880409829988), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.155577] ata2.00: configured for UDMA/133
> [ 1.155591] ata1.00: supports DRM functions and may not be fully accessible
> [ 1.155632] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
> [ 1.155634] ata1.00: configured for UDMA/133
> [ 1.155755] scsi 0:0:0:0: Direct-Access ATA Samsung SSD
> 840 EXT0 PQ: 0 ANSI: 5
> [ 1.155881] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks:
> (120 GB/111 GiB)
> [ 1.155885] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.156076] scsi 1:0:0:0: Direct-Access ATA WDC
> WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
> [ 1.156168] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.156170] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.156229] sd 1:0:0:0: Attached scsi generic sg1 type 0
> [ 1.156234] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks:
> (2.00 TB/1.81 TiB)
> [ 1.156236] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.156236] sd 1:0:0:0: [sdb] 4096-byte physical blocks
> [ 1.156328] sd 1:0:0:0: [sdb] Write Protect is off
> [ 1.156330] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.156337] scsi 2:0:0:0: Direct-Access ATA WDC
> WD20EFRX-68E 80.0 PQ: 0 ANSI: 5
> [ 1.156366] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.156438] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks:
> (2.00 TB/1.81 TiB)
> [ 1.156439] sd 2:0:0:0: [sdc] 4096-byte physical blocks
> [ 1.156477] sd 2:0:0:0: Attached scsi generic sg2 type 0
> [ 1.156522] sd 2:0:0:0: [sdc] Write Protect is off
> [ 1.156524] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 1.156559] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.156573] scsi 3:0:0:0: Direct-Access ATA WDC
> WD20EFRX-68E 82.0 PQ: 0 ANSI: 5
> [ 1.156632] sda: sda1
> [ 1.156698] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks:
> (2.00 TB/1.81 TiB)
> [ 1.156700] sd 3:0:0:0: [sdd] 4096-byte physical blocks
> [ 1.156701] sd 3:0:0:0: Attached scsi generic sg3 type 0
> [ 1.156742] sd 3:0:0:0: [sdd] Write Protect is off
> [ 1.156744] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 1.156776] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.156883] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.161454] Console: switching to colour frame buffer device 240x67
> [ 1.161570] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.161572] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880409829be0), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.161574] ata6.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.02, max UDMA/133
> [ 1.164877] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 1.164878] i915 0000:00:02.0: registered panic notifier
> [ 1.165707] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
> [ 1.165709] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 1.165860] hub 1-1:1.0: USB hub found
> [ 1.165956] hub 1-1:1.0: 6 ports detected
> [ 1.169533] ACPI Error: [DSSP] Namespace lookup failure,
> AE_NOT_FOUND (20131115/psargs-359)
> [ 1.169537] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880409829be0), AE_NOT_FOUND
> (20131115/psparse-536)
> [ 1.169543] ata6.00: configured for UDMA/133
> [ 1.169873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 1.170697] acpi device:48: registered as cooling_device13
> [ 1.170757] input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
> [ 1.170806] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 1.172595] sdd: unknown partition table
> [ 1.172685] sd 3:0:0:0: [sdd] Attached SCSI disk
> [ 1.182810] sdb: unknown partition table
> [ 1.183164] sd 1:0:0:0: [sdb] Attached SCSI disk
> [ 1.183353] scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE
> BH10LS30 1.02 PQ: 0 ANSI: 5
> [ 1.192418] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
> xa/form2 cdda tray
> [ 1.192423] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.192584] sr 5:0:0:0: Attached scsi CD-ROM sr0
> [ 1.192637] sr 5:0:0:0: Attached scsi generic sg4 type 5
> [ 1.281564] usb 2-1: new high-speed USB device number 2 using ehci-pci
> [ 1.414120] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
> [ 1.414124] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 1.414402] hub 2-1:1.0: USB hub found
> [ 1.414457] hub 2-1:1.0: 8 ports detected
> [ 1.637922] tsc: Refined TSC clocksource calibration: 2808.247 MHz
> [ 1.685961] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
> [ 1.778476] usb 2-1.6: New USB device found, idVendor=0424, idProduct=2514
> [ 1.778481] usb 2-1.6: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 1.778762] hub 2-1.6:1.0: USB hub found
> [ 1.778853] hub 2-1.6:1.0: 4 ports detected
> [ 1.784297] sdc: unknown partition table
> [ 1.784644] sd 2:0:0:0: [sdc] Attached SCSI disk
> [ 1.850125] usb 2-1.7: new high-speed USB device number 4 using ehci-pci
> [ 1.942887] usb 2-1.7: New USB device found, idVendor=1a40, idProduct=0101
> [ 1.942892] usb 2-1.7: New USB device strings: Mfr=0, Product=1,
> SerialNumber=0
> [ 1.942895] usb 2-1.7: Product: USB 2.0 Hub [MTT]
> [ 1.943117] hub 2-1.7:1.0: USB hub found
> [ 1.943216] hub 2-1.7:1.0: 4 ports detected
> [ 2.014276] usb 2-1.8: new high-speed USB device number 5 using ehci-pci
> [ 2.109154] usb 2-1.8: New USB device found, idVendor=03f0, idProduct=3217
> [ 2.109158] usb 2-1.8: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 2.109159] usb 2-1.8: Product: HP LaserJet 3050
> [ 2.109161] usb 2-1.8: Manufacturer: Hewlett-Packard
> [ 2.109162] usb 2-1.8: SerialNumber: 00CNCJ258213
> [ 2.182441] usb 2-1.6.2: new high-speed USB device number 6 using ehci-pci
> [ 2.210457] raid6: sse2x1 8458 MB/s
> [ 2.278518] raid6: sse2x2 10948 MB/s
> [ 2.346585] raid6: sse2x4 12604 MB/s
> [ 2.346587] raid6: using algorithm sse2x4 (12604 MB/s)
> [ 2.346588] raid6: using ssse3x2 recovery algorithm
> [ 2.347603] xor: automatically using best checksumming function:
> [ 2.386623] avx : 25103.000 MB/sec
> [ 2.396320] bio: create slab <bio-1> at 1
> [ 2.396510] Btrfs loaded
> [ 2.407711] random: nonblocking pool is initialized
> [ 2.450547] btrfs: device fsid be4138ff-0dd9-48ed-9408-9dd679d4cc0b
> devid 1 transid 329588 /dev/sda1
> [ 2.480216] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 1 transid 34755 /dev/sdb
> [ 2.480289] usb 2-1.6.2: New USB device found, idVendor=03f0, idProduct=e307
> [ 2.480291] usb 2-1.6.2: New USB device strings: Mfr=3, Product=1,
> SerialNumber=0
> [ 2.480293] usb 2-1.6.2: Product: HP Webcam HD 3300
> [ 2.480295] usb 2-1.6.2: Manufacturer: Hewlett Packard
> [ 2.488765] hidraw: raw HID events driver (C) Jiri Kosina
> [ 2.491927] usbcore: registered new interface driver usbhid
> [ 2.491928] usbhid: USB HID core driver
> [ 2.493325] hid-generic 0003:03F0:E307.0001: hiddev0,hidraw0: USB
> HID v1.11 Device [Hewlett Packard HP Webcam HD 3300] on
> usb-0000:00:1d.0-1.6.2/input4
> [ 2.519360] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 3 transid 34755 /dev/sdc
> [ 2.558816] usb 2-1.7.1: new low-speed USB device number 7 using ehci-pci
> [ 2.639160] Switched to clocksource tsc
> [ 2.656706] usb 2-1.7.1: New USB device found, idVendor=046d, idProduct=c046
> [ 2.656711] usb 2-1.7.1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 2.656714] usb 2-1.7.1: Product: USB Optical Mouse
> [ 2.656717] usb 2-1.7.1: Manufacturer: Logitech
> [ 2.660756] input: Logitech USB Optical Mouse as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.1/2-1.7.1:1.0/input/input6
> [ 2.661031] hid-generic 0003:046D:C046.0002: input,hidraw1: USB HID
> v1.10 Mouse [Logitech USB Optical Mouse] on
> usb-0000:00:1d.0-1.7.1/input0
> [ 2.730985] usb 2-1.7.2: new full-speed USB device number 8 using ehci-pci
> [ 2.827404] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> [ 2.829501] usb 2-1.7.2: New USB device found, idVendor=08e6, idProduct=3437
> [ 2.829505] usb 2-1.7.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 2.829508] usb 2-1.7.2: Product: USB SmartCard Reader
> [ 2.829511] usb 2-1.7.2: Manufacturer: Gemplus
> [ 2.899156] usb 2-1.7.3: new full-speed USB device number 9 using ehci-pci
> [ 2.994892] usb 2-1.7.3: New USB device found, idVendor=046d, idProduct=c52b
> [ 2.994897] usb 2-1.7.3: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 2.994900] usb 2-1.7.3: Product: USB Receiver
> [ 2.994902] usb 2-1.7.3: Manufacturer: Logitech
> [ 3.002708] logitech-djreceiver 0003:046D:C52B.0005:
> hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on
> usb-0000:00:1d.0-1.7.3/input2
> [ 3.006437] input: Logitech Unifying Device. Wireless PID:4011 as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.2/0003:046D:C52B.0005/input/input7
> [ 3.006497] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3:
> USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4011]
> on usb-0000:00:1d.0-1.7.3:1
> [ 3.071321] usb 2-1.7.4: new low-speed USB device number 10 using ehci-pci
> [ 3.181473] usb 2-1.7.4: New USB device found, idVendor=04f2, idProduct=1060
> [ 3.181478] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 3.181480] usb 2-1.7.4: Product: USB Keyboard
> [ 3.181483] usb 2-1.7.4: Manufacturer: CHICONY
> [ 3.190664] input: CHICONY USB Keyboard as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/input/input8
> [ 3.190784] hid-generic 0003:04F2:1060.0007: input,hidraw4: USB HID
> v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.7.4/input0
> [ 3.204244] input: CHICONY USB Keyboard as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/input/input9
> [ 3.204527] hid-generic 0003:04F2:1060.0008: input,hiddev0,hidraw5:
> USB HID v1.11 Device [CHICONY USB Keyboard] on
> usb-0000:00:1d.0-1.7.4/input1
> [ 7.529942] btrfs: device fsid be4138ff-0dd9-48ed-9408-9dd679d4cc0b
> devid 1 transid 329588
> /dev/disk/by-uuid/be4138ff-0dd9-48ed-9408-9dd679d4cc0b
> [ 7.530202] btrfs: disk space caching is enabled
> [ 7.544732] Btrfs detected SSD devices, enabling SSD mode
> [ 10.074534] btrfs: disk space caching is enabled
> [ 11.090076] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 11.112338] systemd-udevd[460]: starting version 204
> [ 11.134547] lp: driver loaded but no devices found
> [ 11.140748] ppdev: user-space parallel port driver
> [ 11.160810] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 11.168309] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
> [ 11.172703] ACPI Warning: 0x0000000000000428-0x000000000000042f
> SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
> [ 11.172711] ACPI: If an ACPI driver is available for this device,
> you should use it instead of the native driver
> [ 11.172715] ACPI Warning: 0x0000000000000530-0x000000000000053f
> SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
> [ 11.172720] ACPI Warning: 0x0000000000000530-0x000000000000053f
> SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2
> (20131115/utaddress-251)
> [ 11.172723] ACPI: If an ACPI driver is available for this device,
> you should use it instead of the native driver
> [ 11.172725] ACPI Warning: 0x0000000000000500-0x000000000000052f
> SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
> [ 11.172728] ACPI Warning: 0x0000000000000500-0x000000000000052f
> SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2
> (20131115/utaddress-251)
> [ 11.172732] ACPI: If an ACPI driver is available for this device,
> you should use it instead of the native driver
> [ 11.172733] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 11.186137] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 3 transid 34755 /dev/sdc
> [ 11.189275] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 1 transid 34755 /dev/sdb
> [ 11.193477] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 3 transid 34755 /dev/sdc
> [ 11.198249] btrfs: device fsid 0c1f52fd-e403-4e07-ad2d-edf3d9da039d
> devid 1 transid 34755 /dev/sdb
> [ 11.205094] WARNING! power/level is deprecated; use power/control instead
> [ 11.223521] systemd-udevd[486]: renamed network interface eth0 to eth1
> [ 11.230527] type=1400 audit(1441394196.958:2): apparmor="STATUS"
> operation="profile_load" profile="unconfined" name="/sbin/dhclient"
> pid=710 comm="apparmor_parser"
> [ 11.230533] type=1400 audit(1441394196.958:3): apparmor="STATUS"
> operation="profile_load" profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710
> comm="apparmor_parser"
> [ 11.230536] type=1400 audit(1441394196.958:4): apparmor="STATUS"
> operation="profile_load" profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=710
> comm="apparmor_parser"
> [ 11.230881] type=1400 audit(1441394196.958:5): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710
> comm="apparmor_parser"
> [ 11.230885] type=1400 audit(1441394196.958:6): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=710
> comm="apparmor_parser"
> [ 11.231065] type=1400 audit(1441394196.958:7): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=710
> comm="apparmor_parser"
> [ 11.236836] btrfs: device fsid be4138ff-0dd9-48ed-9408-9dd679d4cc0b
> devid 1 transid 329588 /dev/sda1
> [ 11.243628] btrfs: device fsid be4138ff-0dd9-48ed-9408-9dd679d4cc0b
> devid 1 transid 329588 /dev/sda1
> [ 11.244198] Linux video capture interface: v2.00
> [ 11.255290] uvcvideo: Found UVC 1.00 device HP Webcam HD 3300 (03f0:e307)
> [ 11.257894] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
> [ 11.267304] input: HP Webcam HD 3300 as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input10
> [ 11.267485] usbcore: registered new interface driver uvcvideo
> [ 11.267487] USB Video Class driver (1.1.1)
> [ 11.292706] SKU: Nid=0x1d sku_cfg=0x4016c629
> [ 11.292709] SKU: port_connectivity=0x1
> [ 11.292710] SKU: enable_pcbeep=0x1
> [ 11.292711] SKU: check_sum=0x00000006
> [ 11.292712] SKU: customization=0x000000c6
> [ 11.292712] SKU: external_amp=0x5
> [ 11.292713] SKU: platform_type=0x0
> [ 11.292714] SKU: swap=0x0
> [ 11.292715] SKU: override=0x1
> [ 11.293346] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
> [ 11.293348] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 11.293349] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [ 11.293350] mono: mono_out=0x0
> [ 11.293351] dig-out=0x11/0x1e
> [ 11.293351] inputs:
> [ 11.293353] Front Mic=0x19
> [ 11.293354] Rear Mic=0x18
> [ 11.293355] Line=0x1a
> [ 11.293356] realtek: No valid SSID, checking pincfg 0x4016c629 for NID 0x1d
> [ 11.293357] realtek: Enabling init ASM_ID=0xc629 CODEC_ID=10ec0887
> [ 11.300526] asus_wmi: ASUS WMI generic driver loaded
> [ 11.303937] asus_wmi: Initialization: 0x0
> [ 11.303963] asus_wmi: BIOS WMI version: 0.9
> [ 11.304009] asus_wmi: SFUN value: 0x0
> [ 11.304375] input: Eee PC WMI hotkeys as
> /devices/platform/eeepc-wmi/input/input11
> [ 11.306312] asus_wmi: Backlight controlled by ACPI video driver
> [ 11.328366] input: HDA Intel PCH HDMI/DP,pcm=3 as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
> [ 11.328495] input: HDA Intel PCH Front Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
> [ 11.328611] input: HDA Intel PCH Line Out as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
> [ 11.328832] usbcore: registered new interface driver snd-usb-audio
> [ 11.329014] input: HDA Intel PCH Line as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> [ 11.329138] input: HDA Intel PCH Rear Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [ 11.329254] input: HDA Intel PCH Front Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 11.361634] init: Failed to obtain startpar-bridge instance:
> Unknown parameter: INSTANCE
> [ 12.340581] usblp 2-1.8:1.0: usblp3: USB Bidirectional printer dev
> 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3217
> [ 12.340603] usbcore: registered new interface driver usblp
> [ 25.613739] FS-Cache: Loaded
> [ 25.622135] RPC: Registered named UNIX socket transport module.
> [ 25.622138] RPC: Registered udp transport module.
> [ 25.622139] RPC: Registered tcp transport module.
> [ 25.622140] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 25.640074] FS-Cache: Netfs 'nfs' registered for caching
> [ 25.659220] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 25.671325] init: failsafe main process (945) killed by TERM signal
> [ 25.723593] Bluetooth: Core ver 2.17
> [ 25.723608] NET: Registered protocol family 31
> [ 25.723610] Bluetooth: HCI device and connection manager initialized
> [ 25.723617] Bluetooth: HCI socket layer initialized
> [ 25.723620] Bluetooth: L2CAP socket layer initialized
> [ 25.723625] Bluetooth: SCO socket layer initialized
> [ 25.725710] init: samba-ad-dc main process (1008) terminated with status 1
> [ 25.728247] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 25.728250] Bluetooth: BNEP filters: protocol multicast
> [ 25.728257] Bluetooth: BNEP socket layer initialized
> [ 25.730151] Bluetooth: RFCOMM TTY layer initialized
> [ 25.730158] Bluetooth: RFCOMM socket layer initialized
> [ 25.730163] Bluetooth: RFCOMM ver 1.11
> [ 25.767409] type=1400 audit(1441394211.482:8): apparmor="STATUS"
> operation="profile_load" profile="unconfined"
> name="/usr/lib/cups/backend/cups-pdf" pid=1115 comm="apparmor_parser"
> [ 25.767415] type=1400 audit(1441394211.482:9): apparmor="STATUS"
> operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd"
> pid=1115 comm="apparmor_parser"
> [ 25.767758] type=1400 audit(1441394211.482:10): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/sbin/cupsd" pid=1115 comm="apparmor_parser"
> [ 25.781927] init: cups main process (1139) killed by HUP signal
> [ 25.781935] init: cups main process ended, respawning
> [ 25.807506] type=1400 audit(1441394211.522:11): apparmor="STATUS"
> operation="profile_replace" profile="unconfined" name="/sbin/dhclient"
> pid=1196 comm="apparmor_parser"
> [ 25.807514] type=1400 audit(1441394211.522:12): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1196
> comm="apparmor_parser"
> [ 25.807517] type=1400 audit(1441394211.522:13): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=1196
> comm="apparmor_parser"
> [ 25.807840] type=1400 audit(1441394211.522:14): apparmor="STATUS"
> operation="profile_load" profile="unconfined"
> name="/usr/sbin/cups-browsed" pid=1200 comm="apparmor_parser"
> [ 25.807856] type=1400 audit(1441394211.522:15): apparmor="STATUS"
> operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld"
> pid=1202 comm="apparmor_parser"
> [ 25.807863] type=1400 audit(1441394211.522:16): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1196
> comm="apparmor_parser"
> [ 25.807866] type=1400 audit(1441394211.522:17): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=1196
> comm="apparmor_parser"
> [ 25.936705] r8169 0000:03:00.0 eth1: link down
> [ 25.936746] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 25.936770] r8169 0000:03:00.0 eth1: link down
> [ 25.936893] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 26.143965] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
> recovery directory
> [ 26.143978] NFSD: starting 90-second grace period (net ffffffff81cdab80)
> [ 26.333122] vboxdrv: module verification failed: signature and/or
> required key missing - tainting kernel
> [ 26.335909] vboxdrv: Found 8 processor cores.
> [ 26.336152] vboxdrv: fAsync=0 offMin=0x1f6 offMax=0x3a76
> [ 26.336213] vboxdrv: TSC mode is 'synchronous', kernel timer mode
> is 'normal'.
> [ 26.336214] vboxdrv: Successfully loaded version 4.3.10_Ubuntu
> (interface 0x001a0007).
> [ 26.356040] vboxpci: IOMMU not found (not registered)
> [ 26.425381] init: plymouth-upstart-bridge main process ended, respawning
> [ 26.429145] init: plymouth-upstart-bridge main process (1733)
> terminated with status 1
> [ 26.429154] init: plymouth-upstart-bridge main process ended, respawning
> [ 28.093691] r8169 0000:03:00.0 eth1: link up
> [ 28.093698] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> [ 29.210730] init: plexmediaserver main process (2323) terminated
> with status 2
> [ 29.210745] init: plexmediaserver main process ended, respawning
> [ 29.222150] init: plexmediaserver main process (2349) terminated
> with status 2
> [ 29.222167] init: plexmediaserver main process ended, respawning
> [ 29.227101] init: plexmediaserver main process (2375) terminated
> with status 2
> [ 29.227110] init: plexmediaserver main process ended, respawning
> [ 29.231627] init: plexmediaserver main process (2381) terminated
> with status 2
> [ 29.231635] init: plexmediaserver main process ended, respawning
> [ 29.241439] init: plexmediaserver main process (2387) terminated
> with status 2
> [ 29.241453] init: plexmediaserver main process ended, respawning
> [ 29.247316] init: plexmediaserver main process (2401) terminated
> with status 2
> [ 29.247324] init: plexmediaserver main process ended, respawning
> [ 29.251046] init: plexmediaserver main process (2407) terminated
> with status 2
> [ 29.251053] init: plexmediaserver main process ended, respawning
> [ 29.254974] init: plexmediaserver main process (2410) terminated
> with status 2
> [ 29.254991] init: plexmediaserver main process ended, respawning
> [ 29.258536] init: plexmediaserver main process (2413) terminated
> with status 2
> [ 29.258544] init: plexmediaserver main process ended, respawning
> [ 29.262168] init: plexmediaserver main process (2416) terminated
> with status 2
> [ 29.262176] init: plexmediaserver main process ended, respawning
> [ 29.265842] init: plexmediaserver main process (2419) terminated
> with status 2
> [ 29.265850] init: plexmediaserver respawning too fast, stopped
> [ 46.534732] init: plymouth-stop pre-start process (5500) terminated
> with status 1
> [ 55.865621] audit_printk_skb: 138 callbacks suppressed
> [ 55.865624] type=1400 audit(1441394241.545:64): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/lib/cups/backend/cups-pdf" pid=5569 comm="apparmor_parser"
> [ 55.865628] type=1400 audit(1441394241.545:65): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/sbin/cupsd" pid=5569 comm="apparmor_parser"
> [ 55.865896] type=1400 audit(1441394241.545:66): apparmor="STATUS"
> operation="profile_replace" profile="unconfined"
> name="/usr/sbin/cupsd" pid=5569 comm="apparmor_parser"
>
>
> Thanks,
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-14 6:25 ` Qu Wenruo
@ 2015-09-14 9:44 ` Anand Jain
2015-09-14 23:24 ` Duncan
2015-09-15 1:31 ` Qu Wenruo
0 siblings, 2 replies; 13+ messages in thread
From: Anand Jain @ 2015-09-14 9:44 UTC (permalink / raw)
To: Qu Wenruo; +Cc: Ivan Petrovic, linux-btrfs@vger.kernel.org
Hi Qu,
> Unfortunately, single mode means no duplication.
> And degrade mount only works for RAID level with
> duplication(DUP,RAID1/5/6/10).
further to the below commit.
commit 95669976bd7d30ae265db938ecb46a6b7f8cb893
Btrfs: don't consider the missing device when allocating new chunks
in case of 2-disk RAID1 mounted with only one good disk, we would create
Single profile and actually the created single profiles are still
workable with one disk failed. And so the proposed patch below will let
single profile to be mount in this context..
[PATCH 23/23] Btrfs: allow -o rw,degraded for single group profile
to recover when missing disk is replaced balance convert can migrate
single profiles back to RAID1 profile.
Also your explanation for degraded is correct, I am ok to use a new new
mount option (like auto-reduced-profile ?) if needed / confusing.
Any comments / feedbacks are welcome.
Thanks, Anand
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-14 9:44 ` Anand Jain
@ 2015-09-14 23:24 ` Duncan
2015-09-15 1:31 ` Qu Wenruo
1 sibling, 0 replies; 13+ messages in thread
From: Duncan @ 2015-09-14 23:24 UTC (permalink / raw)
To: linux-btrfs
Anand Jain posted on Mon, 14 Sep 2015 17:44:25 +0800 as excerpted:
> Hi Qu,
>
>> Unfortunately, single mode means no duplication.
>> And degrade mount only works for RAID level with
>> duplication(DUP,RAID1/5/6/10).
>
> further to the below commit.
>
> commit 95669976bd7d30ae265db938ecb46a6b7f8cb893
> Btrfs: don't consider the missing device when allocating new chunks
>
> in case of 2-disk RAID1 mounted with only one good disk, we would create
> Single profile and actually the created single profiles are still
> workable with one disk failed. And so the proposed patch below will let
> single profile to be mount in this context..
> [PATCH 23/23] Btrfs: allow -o rw,degraded for single group profile
>
> to recover when missing disk is replaced balance convert can migrate
> single profiles back to RAID1 profile.
>
> Also your explanation for degraded is correct, I am ok to use a new new
> mount option (like auto-reduced-profile ?) if needed / confusing.
>
> Any comments / feedbacks are welcome.
I'm familiar with the issue, and for all I know it works exactly as
described, but if so, shouldn't it be changed so that while 2-device
raid1 mounted with only a single device create single-profile chunks only
for data, metadata chunk-creation will default back to dup-profile?
If there's a good reason it doesn't, could someone explain it? It seems
to me that raid1 already indicates that two copies is wanted, so if it's
operating degraded with only a single device, shouldn't it go dup,
particularly for metadata? (If possible, I'd say for data as well, but
that's not possible except in mixed-bg-mode.)
--
Duncan - List replies preferred. No HTML msgs.
"Every nonfree program has a lord, a master --
and if you use the program, he is your master." Richard Stallman
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: unable to mount multi disk volume with recovery mode
2015-09-14 9:44 ` Anand Jain
2015-09-14 23:24 ` Duncan
@ 2015-09-15 1:31 ` Qu Wenruo
1 sibling, 0 replies; 13+ messages in thread
From: Qu Wenruo @ 2015-09-15 1:31 UTC (permalink / raw)
To: Anand Jain; +Cc: Ivan Petrovic, linux-btrfs@vger.kernel.org
Hi Aand,
Anand Jain wrote on 2015/09/14 17:44 +0800:
>
>
> Hi Qu,
>
>> Unfortunately, single mode means no duplication.
>> And degrade mount only works for RAID level with
>> duplication(DUP,RAID1/5/6/10).
>
> further to the below commit.
>
> commit 95669976bd7d30ae265db938ecb46a6b7f8cb893
> Btrfs: don't consider the missing device when allocating new chunks
>
> in case of 2-disk RAID1 mounted with only one good disk, we would create
> Single profile and actually the created single profiles are still
> workable with one disk failed.
Yep, that's the case, and Zhao Lei also found the problem and is still
working on it internally.
But we are doing it in a more flex amd robust method:
No global missing device number check, but do per-chunk check against
its stripes at mount time, to ensure it meets the minimum number for
degradable condition.
So for single/raid0 chunk, they still can't be degraded mounted, if any
of its stripe is missing.
> And so the proposed patch below will let
> single profile to be mount in this context..
> [PATCH 23/23] Btrfs: allow -o rw,degraded for single group profile
>
> to recover when missing disk is replaced balance convert can migrate
> single profiles back to RAID1 profile.
>
> Also your explanation for degraded is correct, I am ok to use a new new
> mount option (like auto-reduced-profile ?) if needed / confusing.
Sorry for the confusion I caused.
But for above case, IHMO "degraded" is still the proper term.
For 2 disks, 1 missing, single chunk case, if the chunk is in the good
disk, it should be a good chunk, no need to be degraded.
>
> Any comments / feedbacks are welcome.
But for the patch, I'd like to do it in the manner I mentioned:
Check every chunk for whether it's possible to be degraded,
other than current whole fs missing device check.
Thanks,
Qu
>
> Thanks, Anand
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2015-09-15 1:31 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-04 20:45 unable to mount multi disk volume with recovery mode Ivan Petrovic
2015-09-04 21:13 ` Ivan
2015-09-14 6:25 ` Qu Wenruo
2015-09-14 9:44 ` Anand Jain
2015-09-14 23:24 ` Duncan
2015-09-15 1:31 ` Qu Wenruo
-- strict thread matches above, loose matches on Subject: below --
2015-09-04 21:07 Ivan
2015-09-04 21:17 ` Hugo Mills
2015-09-05 10:13 ` Ivan Petrovic
2015-09-05 10:42 ` Hugo Mills
2015-09-07 17:58 ` Chris Murphy
2015-09-07 18:01 ` Chris Murphy
2015-09-07 18:05 ` Hugo Mills
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).