linux-btrfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Duncan <1i5t5.duncan@cox.net>
To: linux-btrfs@vger.kernel.org
Subject: Re: New file system with same issue (was: Again, no space left on device while rebalancing and recipe doesnt work)
Date: Sun, 13 Mar 2016 17:12:35 +0000 (UTC)	[thread overview]
Message-ID: <pan$9abbc$75454df4$bbede296$bf2d7878@cox.net> (raw)
In-Reply-To: 20160313115809.GQ2334@torres.zugschlus.de

Marc Haber posted on Sun, 13 Mar 2016 12:58:10 +0100 as excerpted:

> I see the same metadata spread as with the old filesystem in btrfs fi
> df,
> totl at 23 and used at 2.38 GiB. What I find strange is that this
> filesystem has Data, System and Metadata in "single" profile, is this
> the new default for a 200 GiB file system?

Single is default for data.  Metadata (and system) will normally default 
to dup on a single device, raid1 on multi-device, EXCEPT on detected 
SSDs, where it defaults to single as well, because the firmware on some 
ssds will dedup it in any case.  If you know your ssd isn't one of the 
deduping ones (as I do, here), you can of course overrule that by 
specifying modes at mkfs.btrfs time.

-- 
Duncan - List replies preferred.   No HTML msgs.
"Every nonfree program has a lord, a master --
and if you use the program, he is your master."  Richard Stallman


  parent reply	other threads:[~2016-03-13 17:12 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-27 21:14 Again, no space left on device while rebalancing and recipe doesnt work Marc Haber
2016-02-27 23:15 ` Martin Steigerwald
2016-02-28  0:08   ` Marc Haber
2016-02-28  0:22     ` Hugo Mills
2016-02-28  8:40       ` Marc Haber
2016-02-29  1:56 ` Qu Wenruo
2016-02-29 15:33   ` Marc Haber
2016-03-01  0:45     ` Qu Wenruo
     [not found]       ` <20160301065448.GJ2334@torres.zugschlus.de>
2016-03-01  7:24         ` Qu Wenruo
2016-03-01  8:13           ` Qu Wenruo
     [not found]             ` <20160301161659.GR2334@torres.zugschlus.de>
2016-03-03  2:02               ` Qu Wenruo
2016-03-01 20:51           ` Duncan
2016-03-05 14:28             ` Marc Haber
2016-03-03  0:28 ` Dāvis Mosāns
2016-03-03  3:42   ` Qu Wenruo
2016-03-03  4:57   ` Duncan
2016-03-03 15:39     ` Dāvis Mosāns
2016-03-04 12:31       ` Duncan
2016-03-04 12:35         ` Hugo Mills
2016-03-27 12:10         ` Martin Steigerwald
2016-03-27 23:12           ` Duncan
2016-03-05 14:39   ` Marc Haber
2016-03-05 19:34     ` Chris Murphy
2016-03-05 20:09       ` Marc Haber
2016-03-06  6:43         ` Duncan
2016-03-06 20:27           ` Chris Murphy
2016-03-06 20:37             ` Chris Murphy
2016-03-07  8:47               ` Marc Haber
2016-03-07  8:42             ` Marc Haber
2016-03-07 18:39               ` Chris Murphy
2016-03-07 18:56                 ` Austin S. Hemmelgarn
2016-03-07 19:07                   ` Chris Murphy
2016-03-07 19:33                   ` Marc Haber
2016-03-12 21:36                 ` Marc Haber
2016-03-07 19:44               ` Chris Murphy
2016-03-07 20:43                 ` Duncan
2016-03-07 22:44                   ` Chris Murphy
2016-03-12 21:30             ` Marc Haber
2016-03-07  8:30           ` Marc Haber
2016-03-07 20:07             ` Duncan
2016-03-07  8:56         ` Marc Haber
2016-03-12 19:57       ` Marc Haber
2016-03-13 19:43         ` Chris Murphy
2016-03-13 20:50           ` Marc Haber
2016-03-13 21:31             ` Chris Murphy
2016-03-12 21:14       ` Marc Haber
2016-03-13 11:58       ` New file system with same issue (was: Again, no space left on device while rebalancing and recipe doesnt work) Marc Haber
2016-03-13 13:17         ` Andrew Vaughan
2016-03-13 16:56           ` Marc Haber
2016-03-13 17:12         ` Duncan [this message]
2016-03-13 21:05           ` Marc Haber
2016-03-14  1:05             ` Duncan
2016-03-14 11:49               ` Marc Haber
2016-03-13 19:14         ` Henk Slager
2016-03-13 19:42           ` Henk Slager
2016-03-13 20:56           ` Marc Haber
2016-03-14  0:00             ` Henk Slager
2016-03-15  7:20               ` Marc Haber
2016-03-14 12:07         ` Marc Haber
2016-03-14 12:48           ` New file system with same issue Holger Hoffstätte
2016-03-14 20:13             ` Marc Haber
2016-03-15 10:52               ` Holger Hoffstätte
2016-03-15 13:46                 ` Marc Haber
2016-03-15 13:54                   ` Austin S. Hemmelgarn
2016-03-15 14:09                     ` Marc Haber
2016-03-17  1:17               ` A good "Boot Maintenance" scheme (WAS: New file system with same issue) Robert White
2016-03-14 13:46           ` New file system with same issue (was: Again, no space left on device while rebalancing and recipe doesnt work) Henk Slager
2016-03-14 20:05             ` Marc Haber
2016-03-14 20:39               ` Henk Slager
2016-03-14 21:59                 ` Chris Murphy
2016-03-14 23:22                   ` Henk Slager
2016-03-15  7:16                     ` Marc Haber
2016-03-15 12:15                       ` Henk Slager
2016-03-15 13:24                         ` Marc Haber
2016-03-15  7:07                 ` Marc Haber
2016-03-27 12:15                   ` Martin Steigerwald
2016-03-15 13:29               ` Marc Haber
2016-03-15 13:42                 ` Marc Haber
2016-03-15 16:54                   ` Henk Slager
2016-03-27  8:41 ` Current state of old filesystem " Marc Haber
2016-04-01 13:59 ` Again, no space left on device while rebalancing and recipe doesnt work Marc Haber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='pan$9abbc$75454df4$bbede296$bf2d7878@cox.net' \
    --to=1i5t5.duncan@cox.net \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).